Touch Screen Problem in Charge - Galaxy Ace S5830 General

I connect charge my ace after not touch screen please help me !!

... what are you asking? be more specific plz

Laziness at its worst. Don't bother to look at related threads, nor does he bother to EXPLAIN the problem.

The solution is on the manual... -.-
While the phone is charging, the
touch screen can not work due to a
instability in energy supply. If this
happens, unplug the charger.
Click to expand...
Click to collapse

kplus said:
The solution is on the manual... -.-
Click to expand...
Click to collapse
You saved my day.

My touch works very well when charge BUT: dual-touch not so good... Second pin(finger) lag... For example: I cant play in Drag Racing perfectly becouse i can't push the gas and shift the gear in one (quick) moment... I have to move little second pin(finger) to work. When i don't charge, dual-touch works great. I used MultiTouch Visualizer 2 for check it. Sorry my english.

in charge the screen receive to high voltage so you can't use

Related

touch screen issue

I just bought a archos 101 g9 when it was on sale on woot last week and so far it is working pretty good, however I have an annoying problem with it.
If it has been sleeping for over a few minutes (regular sleep, not the deep sleep) and I wake it back up the touch screen goes crazy. The bottom left corner keeps detecting a touch event. It will cycle from multiple on/off touches a second to one on/off every few seconds. If I rotate the tablet to portrait, it will start scrolling the screen none stop to the left. So far the only fix is to do a reboot.
It does not happen every time, just occasionally when I wake it up from sleep.
Today i got a case for it, and whenever it is in the case, the touch screen goes crazy. Same touch events in that same area.
I am guessing something is wrong with the digitizer. Anyone else seen this problem before?
Have the same problem, and as I've read on xda and archosfans forums, this isn't an uncommon issue. We'll just have to wait for a firmware update, as rebooting seems to fix it, so it doesn't seem to be a hardware problem.
Sent from my ARCHOS 101G9 using Tapatalk 2
I have exactly the same problems.
@ARCHOS: PLEASE FIX THIS PROBLEM. THIS IS A SERIOUS BUG !
Sensitive Touch
I have similar problems with the touchscreen. If I'm holding it with one hand by a corner, it detects touch. The rest of the time it is a little jittery and releases or double taps in games. It's still not a deal breaker, though.
I hope we don't have to swap digitizers to fix it.
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
I have a similar issue sometimes.
For me the fix is simply to clean the screen.
The strange thing is, it happens even when the screen doesn't appear to be especially dirty but I put the tablet to sleep, give the screen a serious clean with a microfibre cloth and the touchscreen issues vanish.
Could be a different issue to what you guys are having but the symptoms are the same and it's an easy 'fix' to try.
Hope it helps.
Sent from my ARCHOS 80G9 using xda app-developers app
feffrey said:
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
Click to expand...
Click to collapse
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
omegaRED7 said:
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I had not noticed that area in the settings before. Recalibrating it in the cover has helped a lot.
I pretty much had this since day 1......
The current state is ; it doesn't work at all then all of a sudden It will pop back into life and then pretty much go "mental" as already described, I also found it reacts poorly to minor temperature variations, i.e going from outside to inside and general day to day travelling. Recalibrating used to "help" but now has no effect.
From watching the debug logs part of me thinks it's a bit of both, hardware and software ( just a hunch ) I noticed the driver fail to get a "ping" response from the hardware a couple of times.
I've pratically given up on it myself and plugged a keyboard and mouse in via a hub on the full size usb...... The hub has now stopped working for some reason , I'm now on a OTG Keyboard with a Virtual Mouse Driver using the numeric keypad and some adb input trickery ,
I've got another touch screen/digitizer to plug in, just not got round to putting it in yet and a little part of me is starting to enjoy finding more elaborate ways of interacting with the device... :laugh:
Does anyone know who the OEM of the digitizer Unit is? My previous investigation led me to china but information seems to be thin on the ground with this one
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
Same problem and even managed a RMA from ARCHOS. Thing is your OC edition fixed it for me.

How to disable hw capacitive buttons in JB?

HI, since I've always had issues (from stock rom up) with hw capacitive buttons (home/back/search/menu), I would like to disable them, maybe my Folio is faulty on them (randomly the back button fires by itself, even if the tablet was left alone on the table).
So I ask Artem or anybody who knows it: I can build from sources, what is the minimal diff I can make to the sources? Is it sufficent to comment out line 'CONFIG_KEYBOARD_FOLIOCAP=y' in tegra_betelgeuse_android_defconfig?
Thank you.
piergi65 said:
HI, since I've always had issues (from stock rom up) with hw capacitive buttons (home/back/search/menu), I would like to disable them, maybe my Folio is faulty on them (randomly the back button fires by itself, even if the tablet was left alone on the table).
So I ask Artem or anybody who knows it: I can build from sources, what is the minimal diff I can make to the sources? Is it sufficent to comment out line 'CONFIG_KEYBOARD_FOLIOCAP=y' in tegra_betelgeuse_android_defconfig?
Thank you.
Click to expand...
Click to collapse
nice question . some times i have the same problem.
+1
Sent from my folio100 using xda app-developers app
raptor92 said:
+1
Sent from my folio100 using xda app-developers app
Click to expand...
Click to collapse
may be its a bug....
when this happens to me, i click one time on power buttom and than wake it up again. but this isnt the fix solution for the problem, just solves it temporarely
ans solution?
one "solution"
Hello, posting for the first time =)
Anyway, i've had a problem with folios crazy buttons and screen response since day one.
Nothing really changed for me with rom updates and different apps. I have tried it all...
I had enough and finally unplugged that little cable that connects into circuitboard
of those buttons and power-led. This is really no solution but takes care of that problem =)
It also disables power indicator led, so that's a little inconvenience =/. But since unplugged,
touchscreen started to work in every way better like its more responsive and doesn't "freeze" anymore.
But this requires you to disassemble your folio to get to touch with the cable to the circuitboard.
Removing plastic back cover isn't enough, but you Dont have to detache the screen from faceplate.
I'll plug it back on when there's a software fix for buttons behavior. Meanwhile enjoying peace from
button madness =D. Sorry if poor english, i'm Finnish
Justuz said:
But since unplugged,
touchscreen started to work in every way better like its more responsive and doesn't "freeze" anymore.
Click to expand...
Click to collapse
After disassemble screen seems to work, but after some time is starts again and I don't have "crazy" buttons though.
I'm using mouse and keyboard and it's comfortable.

[HELP] screen working but not showing anything

My screen is black and it doesnt showing anything but i can unlock it(i hear the unlock sound). I tried flashing a stock firmware and it didnt help.
Does someone know how to fix it?
hardware
So it looks as a hardware problem, mabe with backlight of the display.
What was the last thing that you were doing before that problem (phone fall down, get wet, modify some libs, reload firmware)?
HI
See this, I have the same problem, and my phone is back to consumers service im moment
http://forum.xda-developers.com/showthread.php?t=1939771&highlight=wake
or this
http://forum.xda-developers.com/showthread.php?p=29925139
in case, I try to flash every Rom and the same problem.
I think, the only chance, is to change the motherboard......
good luck, I have no Ray more since 1 month
sorry for my bad english
simon80bl said:
So it looks as a hardware problem, mabe with backlight of the display.
What was the last thing that you were doing before that problem (phone fall down, get wet, modify some libs, reload firmware)?
Click to expand...
Click to collapse
I flashed jj hybrid rom 3.2 and phone got wet a bit but i put the phone on warm and after a half an hour phone turned off and start vibrating.Day after i turned it on and i noticed that touchscreen is working but its black
luka09 said:
I flashed jj hybrid rom 3.2 and phone got wet a bit but i put the phone on warm and after a half an hour phone turned off and start vibrating.Day after i turned it on and i noticed that touchscreen is working but its black
Click to expand...
Click to collapse
hi mate, Do you always play games while you charging your phone? I think that is the cause of the problem, i had a blank screen problem too, but its not really bad bcoz when i push the on/off button on the top then push it again it will display the screen like a normal.And i notice this problem happened to me since i addicted to play a virtual tennis, i play till the battery drain and connected the charger and keep playing the game, after couple of day, then i got this problem. And one more thing, while i playing any games, i always used the home button to reply sms i got then i push the home button again to get back to the game i played.
ponext said:
hi mate, Do you always play games while you charging your phone? I think that is the cause of the problem, i had a blank screen problem too, but its not really bad bcoz when i push the on/off button on the top then push it again it will display the screen like a normal.And i notice this problem happened to me since i addicted to play a virtual tennis, i play till the battery drain and connected the charger and keep playing the game, after couple of day, then i got this problem. And one more thing, while i playing any games, i always used the home button to reply sms i got then i push the home button again to get back to the game i played.
Click to expand...
Click to collapse
its not working screen is still black

Sony Xperia Touch Problem While charging?

Is there any solution to this problem? Today I flashed ICS and I felt that on charging or when headphones are connected the touch dont work properly. What should I do? Is there any update for this bug? kindly help. Or I should go back to GB.?
waqar bukhari said:
Is there any solution to this problem? Today I flashed ICS and I felt that on charging or when headphones are connected the touch dont work properly. What should I do? Is there any update for this bug? kindly help. Or I should go back to GB.?
Click to expand...
Click to collapse
Please elaborate.....
What is this elebrate? bro touch is laggy. what elebration will do? for example while scrolling a page or switching between homescreens.
Actually, touchscreen lag often occurs when you connect the charger when the source of current is a bit flaky,ie, due to the loose flow of current, the normal touch sensors cant detect your fingers properly and make mistakes. I dont think its ICS here at fault and more likely the charger or the current source.
I have same problem after rooted.
my xperia st23i aka miro always wrong touch while charging, but no if i charging use pc.
I use official ICS rom.
Any solution please...
Sent from my ST23i using Tapatalk 2
Follow @harryrf on twitter
Charge voltage runs on the screen so you can't really touch. That problem is rare. What chargers did you guys use? Just let me know. Please use official charger
Sent from my Xperia U using Tapatalk 2
This problem usually occurs when you use a charger with a higher voltage or mAh. The screen actually becomes extra sensitive due to the way capactive touchscreen works. As such, your touches seem to turn random and uncontrollable. Using the charger that came with your phone would resolve this problem.
ArtemisRider said:
This problem usually occurs when you use a charger with a higher voltage or mAh. The screen actually becomes extra sensitive due to the way capactive touchscreen works. As such, your touches seem to turn random and uncontrollable. Using the charger that came with your phone would resolve this problem.
Click to expand...
Click to collapse
Agree because when I use Huawei charger, I have that issue.
Sent from my Xperia U using Tapatalk 2
waqar bukhari said:
Is there any solution to this problem? Today I flashed ICS and I felt that on charging or when headphones are connected the touch dont work properly. What should I do? Is there any update for this bug? kindly help. Or I should go back to GB.?
Click to expand...
Click to collapse
Well, I haven't been having this issue at all. Do you use any thirdparty charger? If so, try with the original one which came with the phone, sometimes thirdparty chargers and microusb cables can interfer with the touch.

Weird: Keyboard and video very slow after shower.

Hey guys, sorry for title, I couldn't find a better one :S
So what happens? Sometimes, after I took my phone making a shower with me :3 somethings become very slow for about 30/60 min: somethings like keyboard, notifications sounds, whatsapp audio and YouTube and gallery videos pause after 2sec of playback. All other stuff still being fast as hell: camera, music, etc.
It happened already 2 times in 2weeks (so like 14 times I get my baby a shower )
Sent from my SGP712 using Tapatalk
up, nobody has an idea?
Well, for one, stop taking showers with your phone. I think the problem might be with how the water registers on the touchscreen, maybe it slightly shows multiple touches, requiring CPU power. Don't do that anymore
NPK06 said:
Well, for one, stop taking showers with your phone. I think the problem might be with how the water registers on the touchscreen, maybe it slightly shows multiple touches, requiring CPU power. Don't do that anymore
Click to expand...
Click to collapse
So...If you touch your screen too fast, your videos lag for 30min?
farfetch said:
So...If you touch your screen too fast, your videos lag for 30min?
Click to expand...
Click to collapse
For one, keep taking showers I can't replicate this problem though. I seem to have no issues. Is your one white?
farfetch said:
So...If you touch your screen too fast, your videos lag for 30min?
Click to expand...
Click to collapse
No. Multiple droplets on the screen registering as intermittent touches, multiple times a second, might.
Sadman Khan said:
For one, keep taking showers [emoji14] I can't replicate this problem though. I seem to have no issues. Is your one white?
Click to expand...
Click to collapse
No, it is black.
Sent from my SGP712 using Tapatalk
You use your phone under the shower on a daily basis?
If so, why?
And more to the point of your question, do you talk on the phone or are you using the touchscreen to play games, use whatsapp or make... erm shower pictures?
How does the touchscreen react and work while it is still exposed to the permanent drizzle of water?
If you have this thing again I would suggest using the service menu (go to phone and enter *#*#7378423#*#* and run some of the service tests on the affected parts of the phone... You can also try the Xperia Diagnostics tool from the Play Store to almost the same effect.
What actually solves the problem when it occurs? Do you just wait it out and after 60 mins it is done? Or do you reboot when you notice it?
So is it even lagging after you dried your phone?
Do you clean your earphone output? This could explain why your videos are pausing on its own
Walter_White said:
You use your phone under the shower on a daily basis?
If so, why?
And more to the point of your question, do you talk on the phone or are you using the touchscreen to play games, use whatsapp or make... erm shower pictures?
How does the touchscreen react and work while it is still exposed to the permanent drizzle of water?
If you have this thing again I would suggest using the service menu (go to phone and enter *#*#7378423#*#* and run some of the service tests on the affected parts of the phone... You can also try the Xperia Diagnostics tool from the Play Store to almost the same effect.
What actually solves the problem when it occurs? Do you just wait it out and after 60 mins it is done? Or do you reboot when you notice it?
Click to expand...
Click to collapse
Usually I whatsapp mostly. When the screen screen is totally wet, it still works pretty good, until little drops collapse into a single big drop; so I have to blow on my screen.
Reboot doesn't work, just have to wait it to stops.
Sent from my SGP712 using Tapatalk

Categories

Resources