I have downloaded my Rom from samfirmware, I checked the file and as usual there are PDA,Modem,CSC files in addition to that there is a bootloader file which Im not sure how to use it in odin 1.85, shall I put it in bootloader section? and if so shall I activate the "phone bootloader update" on left side of odin?
thanks
Unless you own an I/O edition of tab, I don't recommend bootloader file. As the bootloader file besides locking the bootloader (if repartition selected in odin) replaces fastboot with recovery in boot screen (keys combo). Hence be careful in flashing bootloader!
Place bootloader in bootloader, tick auto-reboot and Reset time only, and flash. The samfirmware roms for p7510 have been uploaded in development section by me to motivate discussions related to issues. If flashing a touchwiz rom, I recommend the arabic rom from development section. Its taken from samfirmware, but as their edition had issues I repacked it hence error free. The touchwiz in this rom is more polished release version!
Thanks for your help , already done after your instructions and successful
I have 3g version of the tablet and used the 4 files
PDA
CSC
Modem
bootloader
repartition and phone bootloader update not activated
and had a successful flashing
by the way the JPKG6 seems to have less problems as I dont see any auto rotation lags and more smooth scrolling in this rom
So I'm confused. I am in the process of flashing CM 10.1 to my Tab, but rading instructions I see that I have likely the Honeycomb bootloaders on my tablet. I used Odin to flash my new recovery and that went well, but now I'm confused by the Bootloader. It is a zip file and it won't flash thru Odin. When I did the recovery.tar did that flash the bootloader for me? do I need to flash anything else.
If you have access to official ICS 4.0.4 firmware you can update to it through Odin which if successful automatically gives you the right bootloader, provided you flashed the firmware for the designated regions in the CM 10.1 OP. However, since you already have the bootloader, extract the zip file and flash the bootloader contained therein via odin. So choose the option you prefer.
Sent from my GT-P7500 using xda app-developers app
Must Have An Unlocked Bootloader To Do This!
This A full stock firmware file I have created to flash with odin to automatically install TWRP recovery along with Disable VBMETA image. The Userdata _AIO tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 1 And Bit 2 Firmware!!!!
Downloads
SM-G981U/U1/W- Model
G981USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
SM-G986U/U1/W- Model
G986USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
SM-G988U/U1/W- Model
G988USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load files in appropriate odin slots
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
elliwigy
klabit87
Krog18
me2151
stang5litre
Raymonf for modified odin
rayan-refoua for boot animation
TheMadScientist
afaneh92
kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
JDBarlow for test S20 stuff
markfm For Bitsafe Firmware
Source For Userdata AIO
Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7
Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!
jhr5474 said:
Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!
Click to expand...
Click to collapse
I dont have s20 so Im limited what I can make
If tokens can be updated to flash higher bootloaders then I will adjust files accordingly
This works great! I flashed the entire U1 DUB7 update with the force wipe with BL files in the USERDATA slot. Everything went well.
Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol
scepz said:
Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol
Click to expand...
Click to collapse
So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them
jrkruse said:
So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them
Click to expand...
Click to collapse
Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.
scepz said:
Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.
Click to expand...
Click to collapse
Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files
jrkruse said:
Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files
Click to expand...
Click to collapse
I tried with just your user data file still didn't work. So your saying next time use all files besides BL?
scepz said:
I tried with just your user data file still didn't work. So your saying next time use all files besides BL?
Click to expand...
Click to collapse
I'll make a specific one for sm-g981v
jrkruse said:
I'll make a specific one for sm-g981v
Click to expand...
Click to collapse
Ok
scepz said:
Ok
Click to expand...
Click to collapse
files in the OP
jrkruse said:
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
Downloads
SM-G981U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G981V- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981V_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981V_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981V_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981V_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G986U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G986_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G986_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G986_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G986_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G988U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G988_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G988_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G988_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G988_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_G98*U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_G98*U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Click to expand...
Click to collapse
Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware
Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware
All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.
www.sammobile.com
Gianni's said:
Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware
Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware
All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.
www.sammobile.com
Click to expand...
Click to collapse
The ones without bootloaders will work. The NO_BL ones. Probably have to use the force wipe one
So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:
1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?
rlewis312010 said:
So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:
1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?
Click to expand...
Click to collapse
I did it that way, used the BL included file and flashed all the stock files, after the full wipe everything that I needed was included. Worked great, on UI 3.1 rn
It worked for me also, thanks for making this.
hi jrkruse i just got an A71 5g unlocked (thanks afaneh92), and i was wondering if you could make an aio userdata file for it? so i can flash ui 3.1 firmware to it? like this for my s20 ultra..(this thread)
Hi am sick right now caused i messed up i trying to google frp my sm-a315g/dsl device and it kept freezing so i decided to try flashing individual files (yeah I should get some good licks for that ) so i started with the bootloader file it was successful but now the phone won't turn on at all not even charging. I tried brom tp but i don't have the right scatter files. Can anyone help me SOLVE my problem that I caused.
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Teddy Lo said:
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Click to expand...
Click to collapse
The phone not reading to work with Odin thats why am trying via Brom TP unless there is another way to get it show on Odin, cause the phone is not powering on to enter download mode.
Check SP Flash Tool with MTK drivers for MediaTek Helio P65 (MT6768).
Factory images fastboot stock firmware to be downloaded (not odin)
Before error , installed firmware was unofficial stock firmware (rooted but removed it)
tried install stock firmware ( https://www.sammobile.com/samsung/galaxy-m11/firmware/SM-M115F/INS/download/M115FXXU2AUA3/1537817/ ) but odin failed
locked boot-loader (was unlocked earlier) as thinking it might help
now i am stuck in download mode.
HELP ME
HOPING FOR REPLY
MESSingUPthenLEARNing said:
Before error , installed firmware was unofficial stock firmware (rooted but removed it)
tried install stock firmware ( https://www.sammobile.com/samsung/galaxy-m11/firmware/SM-M115F/INS/download/M115FXXU2AUA3/1537817/ ) but odin failed
locked boot-loader (was unlocked earlier) as thinking it might help
now i am stuck in download mode.
HELP ME
HOPING FOR REPLY
Click to expand...
Click to collapse
Test this Odin
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com