Hey guys. So I tried to switch form Cyanogen to the stock 2.2 for my country, and now it's stuck in boot loop ("Android" ). What should I do? I reflashed the rom like 4 times now, cleared the cache, wiped the phone, the dalvik cache.. It can't boot =|
Thanks​
it's been fixed by flashing a different ROM right off SamFirmware.com
Related
Hello guys,
Just got my new I9100 yesterday.
Phone Specs:
PDA: I9100XWKL1
Phone : I9100DDKL1
CSC: I9100DDKL1
I flashed CF Root I9100XWKL1 and rooted my phone. Later I downloaded official MIUI and flashed it via CWM Recovery. Wiped cache and Dalvik cache. Now the phone is stuck at MI logo. I just hear the galaxy sII startup tone and the phone shows logo and does not moves ahead. What to do now guys? Have I went somewhere wrong?? Guide me
Try reflashing the rom without any wipe.
Or boot into recovery if you can & do a wipe/factory reset.
m2smoe said:
Try reflashing the rom without any wipe.
Click to expand...
Click to collapse
I tried reflashing still stuck at logo.
MistahBungle said:
Or boot into recovery if you can & do a wipe/factory reset.
Click to expand...
Click to collapse
Done. Booted now after factory reset Thanks
As strange as this may sound, I usually wipe cache and dalvik before flashing the ROM...I had similar issues with CM7 when I wiped cache and dalvik after install. Enter recovery again, wipe cache and dalvik and flash ZIP, then reboot and see...
Otherwise, the only other possible explaination is that the first bootup does take some time...but usually never pauses or stops the animation.
0semaj0 said:
As strange as this may sound, I usually wipe cache and dalvik before flashing the ROM...I had similar issues with CM7 when I wiped cache and dalvik after install. Enter recovery again, wipe cache and dalvik and flash ZIP, then reboot and see...
Otherwise, the only other possible explaination is that the first bootup does take some time...but usually never pauses or stops the animation.
Click to expand...
Click to collapse
Hmmm that's not very strange. Also I was considering that first boot will take time as dalvik cache is prepared and then system gets running. But the wait time was abnormal in first case.
Sent from my GT-I9100 using Tapatalk
Hi guys,
I just flashed criskelo rom to my phone, but I tried to do a hard reset using the code (*2767....) and now my phone is stuck on the boot screen (SAMSUNG). I've waited a long time already, left it over night and nothing.
Also I tried to recover the back up I made with CWM, but I'm again stuck on boot screen...
Any ideas on what I can do??
Thanks
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
ahmedmaaiee said:
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
Click to expand...
Click to collapse
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
have you tried flashing to the stock rom using Odin?
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Arachnid92 said:
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Click to expand...
Click to collapse
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Ryudo0 said:
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Click to expand...
Click to collapse
If I remember correctly, Criskelo ROM does not require you to wipe anything if you're coming from a stock ROM (it does everything through the install script). So just install it and live happily ever after
getting stuck on the boot screen is normal...i did twice already while flashing new rooms...usualy for forgeting to wipe. reflashing the stock rom always works.
ok i had download odin, and flashed everything went great, it reset and just hung on the boot logo for like 5 min, then installed TWRP and flashed Superuser and wiped cache and dalvik and then rebooted, same thing it will not get past the att boot logo, i do not have kies installed but i do have the usb drives. could that be and issues?
Bradl79 said:
ok i had download odin, and flashed everything went great, it reset and just hung on the boot logo for like 5 min, then installed TWRP and flashed Superuser and wiped cache and dalvik and then rebooted, same thing it will not get past the att boot logo, i do not have kies installed but i do have the usb drives. could that be and issues?
Click to expand...
Click to collapse
If you used Odin kies wouldn't be involved. I had similar problem. I did a complete wipe (both caches, system and data) then installed via Odin again. Now all is good.
Sent from my SAMSUNG-SGH-I717 using xda premium
thank you, that worked.
if anyone has this problem again save yourself some time. reboot into recovery and factory reset. Worked for me.
440bro said:
if anyone has this problem again save yourself some time. reboot into recovery and factory reset. Worked for me.
Click to expand...
Click to collapse
also rebooted into stock recovery and factory resetted. FInally booted, give it some time (likke 5-10 minutes) after the ATT logo freeze, Its probably building the bloatware cache.
Keep in mind installing this rom is a change of rom base and not just a little tweek -- all the wipes we usually do and backups of everything should be done to ensure a clean install.
It is a nice stock rom, and I was shocked at the amount of at&t bloat included.
chrisrotolo said:
also rebooted into stock recovery and factory resetted. FInally booted, give it some time (likke 5-10 minutes) after the ATT logo freeze, Its probably building the bloatware cache.
Click to expand...
Click to collapse
Lololol bloatware cache
It's building the dalvik cache, just like every Rom does when you wipe dalvik cache, or factory reset as dalvik is on the data partition.
AT&T are just freaking amateurs, they didn't make the boot animation loop at all... so once it's done and is building the cache. It appears to have just stopped there.
Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Bassel Atef said:
Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Click to expand...
Click to collapse
don't flash odin stock package over custom rom directly. do wip data/factory reset before flashing odin rom. the first boot will take several minutes so be patient.
don't forget to use last odin version 3.09 or 3.10
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Bassel Atef said:
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Click to expand...
Click to collapse
are you sur that you flash the correct firmeware. i think there is several galaxy s3 neo models. so cheek if it is correct firmeware. or just maybe your firmeware that you flash is damaged.
also you can cheek " nand erase all " option in odin . after flash is complette go to recovery and wip cache an factory reset (compulsory).
i thought of installing a custom tom ... i got it here https://forum.xda-developers.com/samsung-s7390/development/cyanopop-rom-gt-s7392-t3100158
Then i flashed it with cwm recovery and when the phone rebooted i was stuck in samsung logo. then i used twrp and formated system and data then flashed the rom then cleared delvik cache now blank screen shows then again i flashed it then it is again stuck on samsung screen... please help me... sorry for bad English...
sankalp21 said:
i thought of installing a custom tom ... i got it here https://forum.xda-developers.com/samsung-s7390/development/cyanopop-rom-gt-s7392-t3100158
Then i flashed it with cwm recovery and when the phone rebooted i was stuck in samsung logo. then i used twrp and formated system and data then flashed the rom then cleared delvik cache now blank screen shows then again i flashed it then it is again stuck on samsung screen... please help me... sorry for bad English...
Click to expand...
Click to collapse
Heh, it's looks like your downloaded Rom.zip seems corrupted, Re-download The Rom and try flashing it.
sankalp21 said:
i thought of installing a custom tom ... i got it here https://forum.xda-developers.com/samsung-s7390/development/cyanopop-rom-gt-s7392-t3100158
Then i flashed it with cwm recovery and when the phone rebooted i was stuck in samsung logo. then i used twrp and formated system and data then flashed the rom then cleared delvik cache now blank screen shows then again i flashed it then it is again stuck on samsung screen... please help me... sorry for bad English...
Click to expand...
Click to collapse
i can help i owned this device
use most stable rom
cyanpop rom has bootloop bug if you full wipe system
update your twrp to 3.0
flash this to update your recovery using cwm phiz and twrp
http://forum.xda-developers.com/attachment.php?attachmentid=3825556&d=1469642152
after flash pull out battery and reboot in recovery again
now flash this by wipe system
https://forum.xda-developers.com/android/development/rom-cyanogenmod-11-t3298683
wipe data and cache and reboot
your device boots for sure
hit thumbs up if i helped you