[Q] Samsung Gio Cant Connect to Odin ..? - Android Q&A, Help & Troubleshooting

Hello,
I have 2 Samsung Gio's, they both where simlocked 2 Vodafone NL, I unlocked this phones with the following Methode.
http://forum.xda-developers.com/showthread.php?t=1192122
This worked just fine for 1 of the 2 phone's the other one got Bricked ..
Now I wanna flash a new rom, but non of the both wanna connect to Odin, not the bricked one and not the working one.
I installed odin, downloaded more custom roms, but also non of them worked, When i put the Gio in Downloading modes, odin wont get a port.
I also tried it on multible computers, and laptops.
System
AMD QuadCore
Windows 7 64 Bitt
What Am i Doing wrong or what can I try ? Is there another methode than Odin ?
Thanks,
Sorry if the english is bad, I am from Netherlands

Wilco87 said:
Hello,
I have 2 Samsung Gio's, they both where simlocked 2 Vodafone NL, I unlocked this phones with the following Methode.
http://forum.xda-developers.com/showthread.php?t=1192122
This worked just fine for 1 of the 2 phone's the other one got Bricked ..
Click to expand...
Click to collapse
The bricked one needs to visit a service center. There's now a method using bml5 that has not bricked any phones, it's been known for a few weeks. I've PM'ed StoneBoyTony about adding some info on this.
Windows 7 64 Bit
Click to expand...
Click to collapse
That's probably your problem right there. Odin is fickle with regards to drivers and software installed. Is Kies still running?

Please use the Q&A Forum for questions Thanks
Moving to Q&A

Related

unbranding uk 3g phone??

Hey guys just got my s2 today.
its locked on 3G network uk
and i would like to unbrand it to the sim free unlocked version.
Which is the right firmware for me to use?
XWKE2
XEUKD1
Thank you
You'll need to get the unlock code from 3G or buy one online.
after you've unlocked it, you need to flash custom rom, ODIN should be able to do it.
http://forum.xda-developers.com/showthread.php?t=1064894
Debrand Guide here but the rebrand is for O2 but same steps if you have original saved 3 firmware .
jje
aachil said:
Hey guys just got my s2 today.
its locked on 3G network uk
and i would like to unbrand it to the sim free unlocked version.
Which is the right firmware for me to use?
XWKE2
XEUKD1
Thank you
Click to expand...
Click to collapse
Hi try with another network sim card. I bought from 3 last week on a 24 months contract and tested with O2 sim and it works. My handset is not locked to 3. Yours may be the same. Please check. (may be 3 is not locking SGS II in the first few batches, I only guess)
Also, I flashed latest official ROM with Odin and it works. Also I rooted my phone.
Ok so what firmware is the correct sim free uk version?
Correct as in probable original KDD dependant upon build date Kies will show latest version for phones brand as of today .
Upgrade KE1 followed by KE 2 which has just been pulled waiting for KE3 .
Unbrand as post says to KDD then you can upgrade using same method when KE3 is released .
jje
im trying to find the official 3g firmware incase it goes wrong but cant seem to find it does anyone know where i can get it?
aachil said:
im trying to find the official 3g firmware incase it goes wrong but cant seem to find it does anyone know where i can get it?
Click to expand...
Click to collapse
Only from a user that has it or try .
http://forum.xda-developers.com/showthread.php?t=834884
jje
As mentioned earlier 3 phones may be branded, but they are not locked. I'm typing this using t-mobile sim in 3 branded phone
Sent from my GT-I9100 using XDA App
My 3 branded phone is also unlocked
unfortunatly my phone is locked to 3

So i have a question..

Hi all i have a Samsung Galaxy S II on vodafone i guess its locked on vodafone (not sure), I was wondering if there a way i can reflash it or reinstall it with default SII software?
Yep. Search for an unbranded firmware for your country over @ Sammobile.com given our collection of same went away recently. Follow whatever installation instructions they have for flashing same.
Also, if you wanted to 'de-brand' your phone, you could always root it (search on here, there are 1000's of posts that tell you the how & why of this. This thread is a good start), and then use Titanium Backup to freeze or uninstall all the crap your telco/Samsung put on the phone.
P.S - You got a free thanks due to my fat fingers. Today is your lucky day.
Buff3r said:
Hi all i have a Samsung Galaxy S II on vodafone i guess its locked on vodafone (not sure), I was wondering if there a way i can reflash it or reinstall it with default SII software?
Click to expand...
Click to collapse
You can get the unlock tool here:https://market.android.com/details?...sMSwxLDEsImNvbS5oZWxyb3ouZ2FsYXh5c3VubG9jayJd

[Q] HUAWEI u8950-1 g600 ics firmware needed

i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power. after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable:silly::silly:.
so i think if i have original firmware it will be fixed.
thanks in advance
mazi_v said:
i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power. after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable:silly::silly:.
so i think if i have original firmware it will be fixed.
thanks in advance
Click to expand...
Click to collapse
i have the same problem as u !!
i have huawei u8950-1 . i used an offline unlock bootloader , it worked and i rooted my device but the problem is bluetooth doesnt work anymore !!
i surfed all the net and there is no official firmware for u8950-1 !!
so we have no other option , we have to wait till releasing official firmware via huawei website .
HELP ME
plaese
rom official huawei g 600 u8950-1
costum rom huwei g600 u8950-1
ronaadinho said:
i have the same problem as u !!
i have huawei u8950-1 . i used an offline unlock bootloader , it worked and i rooted my device but the problem is bluetooth doesnt work anymore !!
i surfed all the net and there is no official firmware for u8950-1 !!
so we have no other option , we have to wait till releasing official firmware via huawei website .
Click to expand...
Click to collapse
hey buddies !!
i have found these 3 firmware for u8950-1 but i cant put their links here because my posts are below 10 .
i have downloaded all 3 ones but i havent tried them yet . i think all 3 are official firmwares , the first one is used in Czech Republic and i have found 2 guys from Czech Republic in xda who have this verion on their 8950-1 and its working all fine . have u tried them ????
versions are :
1. V100R001C326B953
2. V100R001C00B941
3. V100R001C00B942
they have been uploaded on a uploadcenter ( ulozto) from Czech Republic u can google u8950-1 ulozto and find them easily .
i got my phone to huawei service center and they flash it to ver 957 and its all ok now.
if you tried one of this rom let us know.
but rooting problem still last and suffering:crying:
roms link
h t t p:/ /w ww.ulozto.net/hledej?q=u8950-1
mazi_v said:
i got my phone to huawei service center and they flash it to ver 957 and its all ok now.
if you tried one of this rom let us know.
but rooting problem still last and suffering:crying:
Click to expand...
Click to collapse
Hey buddy , thank u for helping . Could u let us know , did u pay money for ur phone to be flashed or not ? Because as u know rooting phone voids its guarantee . By the way , i havent tried them because after that i need unlock code and huawei hasnt sent me any code yet . So i prefer my phone to be rooted instead of having my bluetooth working and unfortunately there is no solution for rooting u8950-1 yet . Im wondering why they dont email us any unlock code for u8950-1 but they have sent to people unlock code for u8950d . Did u ask huawei service about unlock code ?
U8950-1
hi xda
please official rom huwaei G600 U8950-1
thank you very much
HELP ME
my phone U8950-1V100R001C00B948
nothing rom by phone please official rom my phone
ronaadinho said:
Hey buddy , thank u for helping . Could u let us know , did u pay money for ur phone to be flashed or not ? Because as u know rooting phone voids its guarantee . By the way , i haven't tried them because after that i need unlock code and huawei hasn't sent me any code yet . So i prefer my phone to be rooted instead of having my Bluetooth working and unfortunately there is no solution for rooting u8950-1 yet . I'm wondering why they don't email us any unlock code for u8950-1 but they have sent to people unlock code for u8950d . Did u ask huawei service about unlock code ?
Click to expand...
Click to collapse
i didn't paid anything.i think they were so kind with me and didn't avoid my guaranty.
you can unroot your device then take it to service center.
or flash one of that ROM on my previous post.
ronaadinho said:
hey buddies !!
i have found these 3 firmware for u8950-1 but i cant put their links here because my posts are below 10 .
i have downloaded all 3 ones but i havent tried them yet . i think all 3 are official firmwares , the first one is used in Czech Republic and i have found 2 guys from Czech Republic in xda who have this verion on their 8950-1 and its working all fine . have u tried them ????
versions are :
1. V100R001C326B953
2. V100R001C00B941
3. V100R001C00B942
they have been uploaded on a uploadcenter ( ulozto) from Czech Republic u can google u8950-1 ulozto and find them easily .
Click to expand...
Click to collapse
Hi everybody,
I try also to find an original firware for my u-8950-1, I downloaded the V100R001C326B953 firmware but it doesn't install on my phone (i have U8950-1V100R001WEC00B942).
The 3 firware versions are only work with Czech phones i think.
Anyone have link to other official firware? I try google and of course huawei website but couldn't find anything.
Thanks for your help guys.
jimibxl said:
The 3 firware versions are only work with Czech phones i think.
Anyone have link to other official firware? I try google and of course huawei website but couldn't find anything.
Thanks for your help guys.
Click to expand...
Click to collapse
http://consumer.huawei.com/en/mobile-phones/smart-phones/support/downloads/u8950-en.htm
Update failed
Hello, I tried to install the HUAWEI Ascend G600 firmware(U8950-1,Android 4.0,V100R001C00B961,General Version), but the second step crashes with the message "update failed" . Can anyone help me understand the problem? thanks
jag123123 said:
Hello, I tried to install the HUAWEI Ascend G600 firmware(U8950-1,Android 4.0,V100R001C00B961,General Version), but the second step crashes with the message "update failed" . Can anyone help me understand the problem? thanks
Click to expand...
Click to collapse
I received the problem too, but tried it on my U8950N-51
I will give this firmware a go:
http://www.mediafire.com/download/2jxf7v81ra60pw7/U8950-1-V100R001C326B953-CZ.rar
Otherwise, I might try these ones:
http://www.ulozto.net/hledej?q=u8950-1
Is u'r Problem fixed..?
jag123123 said:
Hello, I tried to install the HUAWEI Ascend G600 firmware(U8950-1,Android 4.0,V100R001C00B961,General Version), but the second step crashes with the message "update failed" . Can anyone help me understand the problem? thanks
Click to expand...
Click to collapse
hey I'm also in the same situation Step 2/2 "Update failed".. Please tell how to Fix this..
mailtomeesubash said:
hey I'm also in the same situation Step 2/2 "Update failed".. Please tell how to Fix this..
Click to expand...
Click to collapse
Hi. i have a serious problem on my huawei u8950n-51. I need the original firmware. thanks
Please
mazi_v said:
i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power. after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable:silly::silly:.
so i think if i have original firmware it will be fixed.
thanks in advance
Click to expand...
Click to collapse
Please can u till me which program had u used to unlock boot loader of huawie u8950-1 cz i tried dc unlocker and it has a problem.. it always says:
unknown error (231)
DBAadapter reserved Interface driver ver. 2.0.6.601 required, please download and install
and i downloaded that driver but the problem still exists>>
so please kindely tell me where is that file u used, or is there any program for that other than dc unlocker
hi:
mine is "u8950-1V100R1C00B963"
ANY firmwares to suggest?
8950-1 State 9008
Hello Hi Huawei 8950-1 brick when connected to a computer is defined as port 9008, how can it be restored prompt please?
You have to find UPDATE.APP file and try to reset by dload (you can find some instructions on internet)
9008 Huawei u8950-1
I was told that I can recover through the QPST That in the beginning it is necessary to restore the loader and it should go to mode 9006 and then restore the flash but it does not want to be stitched in the program QPST .And Dload is the program such? First time I hear

Unbrick Mtk6589 Star x920

Hi there, I'm a new User and two months ago I flashed a wrong ROM, because flash didn't work, I used a Star S5 one instead of a X920Butterfly one. So I tried this guide http://forum.xda-developers.com/showthread.php?t=2294977 but my PC do not recognises phone, I Have Upgraded Windows 7 to Windows 8 so I don't now how I can re-install drivers, Please help me.
Sorry for my English but I'm Italian.
No one can help me?
hey did you solve it? do you know testpoints for this phone already??
Tnx

Galaxy S2 branded firmware

Hi, i'm new to this forum and I have a question regarding my old Galaxy S2. The phone is running on Android 2.3.4 (Carrier branded - Swisscom, the logo appears while turning the phone on), SIM unlocked. I was wondering could I install LineageOS or any newer custom rom immediately, or do I need to install different firmware before that? By the way, I'm new when it comes to rooting/custom roms etc, so I'm scared that i might brick it.
Thanks in advance
b0onk said:
Hi, i'm new to this forum and I have a question regarding my old Galaxy S2. The phone is running on Android 2.3.4 (Carrier branded - Swisscom, the logo appears while turning the phone on), SIM unlocked. I was wondering could I install LineageOS or any newer custom rom immediately, or do I need to install different firmware before that? By the way, I'm new when it comes to rooting/custom roms etc, so I'm scared that i might brick it.
Thanks in advance
Click to expand...
Click to collapse
Hi and welcome to XDA.
Please have a look at this thread https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601
I used this guide a couple of years ago to move from 2.3.6 to 7.1.2. You now have more choice for the Android version, you can update to 7, 8 or 9 if you like. The guide will get you to the point of ROM installation, from there you can use the install instructions for the one you choose.
Good luck, happy flashing and let us know how you go.

Categories

Resources