Hi, I installed new rom ([JB] [P4--P4WIFI--P4VZW] 4.1.2 AOKP), but i didnt canceled the security of lockscreen with PIN. After install old PIN doesnt work and i dont have access to my tablet. Version of my recovery is: Team Win Recovery Project (TWRP) - 2.3.1.1.
holding power and volum down button redirect me to download menu
holding power and volume up button just reset tablet
what i must do now?
pls any ideas how to get to recovery menu?
It doesn't make sense that you wouldn't be able to access recovery on a hard reset unless you're using the wrong key combination.
Hold Power and Volume down which is right next to power, and keep holding them until you see the Galaxy tab logo. Then let go of Power ONLY and keep holding volume down. That should result in two options...recovery on the left, and download on the right. Let go of volume down as soon as you see the two icons, then press volume down once to select recovery, then volume up to select it.
Good luck!
Sent from my Infamous Tab.
txh, everything is now ok, i was wrong with second step after restarting ...
thx again
This is my first post and I hope it will help you to fix the problem with wrong weather widget location.
I had this problem for a while.
I have tried all the potential solutions but nothing worked.
For those who do not want to root their phone and do not want to install other weather app for many reasons i will show you the best solution that worked for me and i hope it will help other people.
First of all, back up all your settings with Kies. -It is important because you will lose ALL your data if you do not.
After that disconnect the phone from usb and go to recovery mode (press Vol. UP + Home Button + Power Button until you see the Samsung Galaxy SIII logo)
Using the Vol. Up/Down Button go to wipe data/factory reset and press the Power Button
Using the Vol. Up/Down Button go to Yes -- delete all user data and press the Power Button
Once that procedure finished and you are in the main menu of recovery mode
Using the Vol. Up/Down Button go to wipe cache partition and press the Power Button.
Once that procedure finished and you are in the main menu of recovery mode
Using the Vol. Up/Down Button go to wipe data/factory reset and press the Power Button
Using the Vol. Up/Down Button go to Yes -- delete all user data and press the Power Button
Once that procedure finished and you are in the main menu of recovery mode
Using the Vol. Up/Down Button go to reboot system now and press the Power Button
Setup your phone as you did for first time
And then connect the phone to your PC using Kies to restore the backup that you did before.
It worked for me and I have no problem at all.
*** I haven’t try all this to other SG3 such as Sprint, Verizon or Rogers. I have tried this only to the International Version of SG3 ***
Say Thanks if that solution is working.
(sorry about my chinglish )
So here's how:I locked my nexus10 and forgot the password, and I do not see the "Forgotten" button on the screen and also I didn't turn USB debugging mode on, so is there any possibility I can save my data instead of cleaning them up? Thank you (btw, I deleted the original recover files(because I once booted Ubuntu Touch on it) how can I reset it anyway?) Tanks a lot
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
eytan123 said:
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
Click to expand...
Click to collapse
yeah........I see, so how can I clean everything, the recovery is dead and I didn't turn the debugging mode on
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
eytan123 said:
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
Click to expand...
Click to collapse
The recovery has been deleted by me when I boot Ubuntu Touch on it
u cant get download mode and flash recovery? debuging must be on to do it? i dont think should be on.
Sent from my GT-I9100
Fastboot
You can use Fastboot without USB Debugging enabled.
"To use fastboot, power off, then hold down the power button and both volume buttons. That will take you to the bootloader screen where you, or the toolkit, can do fastboot commands."
I've attached a CWM Recovery image for your device.
Place it somewhere on your computer and open the Terminal application on your computer. Run the following command:
fastboot flash recovery <image location>
Then you can backup /data using advanced backup, perform a factory reset, CREATE A FULL BACKUP, then restore /data using advanced restore.
My Quest tablet is accidentally locked yesterday it asking for gmail and password but i forgot the gmail id and password.So after a long search i found lots of things such as unlocking tablet pattern lock,gmail lock,pin lock etc.These topics only be successfull only when the tablet is in recovery mode.So i tried to put my tablet into recovery mode by pressing vol + and power button.But there appears a android bot lying with red traiangle exlamation.So i simply tried to access recovery menu by pressing power and the vol + .But nothing happens neither than a dead android bot lying down with a red traiangle.
IS THERE ANYONE IN THE WORLD TO HELP ME!!!!.
Hi,
I have a Chinese one too. (Onda XV610W) and the recovery procedure is as follows:
Power + Home until first start screen (normal droid)
Release Power, continue to hold Home
Android lying down with red triangle and exclamation mark will appear
Release Home and quickly press Home again
Recovery Screen will appear.
In the Recovery Screen, the navigation keys are as follows:
Vol+ for cursor up, Vol- for cursor down
Power for Enter
Home, for Exit Recovery and back to Android lying down with red triangle and exclamation mark, press and hold Power to shutdown
In your case, I would think the Vol+ will replace the Home key. So for yours it will be:
Power + Vol+ until first start screen (normal droid)
Release Power, continue to hold Vol+
Android lying down with red triangle and exclamation mark will appear
Release Vol+ and quickly press Vol+ again
Recovery Screen will appear.
In the Recovery Screen, the navigation keys are as follows:
Vol+ for cursor up, Vol- for cursor down
Power for Enter
To exit Recovery, there could be a menu item EXIT, or maybe using the Home key. It is probably written somewhere on the Recovery screen.
The key sequences might differ slightly from mine, so you may have to be patient and explore a bit. Patience and exploration was how I learnt to do mine. Good luck.
To open recovery menu press power key vol+, VOL-& home key...........& then to navigate in recovery menu use vol+& vol-
Sent from my GT-S7562 using xda app-developers app
Clearly noted
Hey guys thanks for the replies,But i have only vol+,vol-,power key and a small reset button inside.What to do and my problem is clearly noted in the question
chan.sk said:
Hi,
I have a Chinese one too. (Onda XV610W) and the recovery procedure is as follows:
Power + Home until first start screen (normal droid)
Release Power, continue to hold Home
Android lying down with red triangle and exclamation mark will appear
Release Home and quickly press Home again
Recovery Screen will appear.
In the Recovery Screen, the navigation keys are as follows:
Vol+ for cursor up, Vol- for cursor down
Power for Enter
Home, for Exit Recovery and back to Android lying down with red triangle and exclamation mark, press and hold Power to shutdown
In your case, I would think the Vol+ will replace the Home key. So for yours it will be:
Power + Vol+ until first start screen (normal droid)
Release Power, continue to hold Vol+
Android lying down with red triangle and exclamation mark will appear
Release Vol+ and quickly press Vol+ again
Recovery Screen will appear.
In the Recovery Screen, the navigation keys are as follows:
Vol+ for cursor up, Vol- for cursor down
Power for Enter
To exit Recovery, there could be a menu item EXIT, or maybe using the Home key. It is probably written somewhere on the Recovery screen.
The key sequences might differ slightly from mine, so you may have to be patient and explore a bit. Patience and exploration was how I learnt to do mine. Good luck.
Click to expand...
Click to collapse
Hai chak thanks for your reply i had followed your steps but no success only android red bot screen
SOLUTION!!
shihabsoft said:
My Quest tablet is accidentally locked yesterday it asking for gmail and password but i forgot the gmail id and password.So after a long search i found lots of things such as unlocking tablet pattern lock,gmail lock,pin lock etc.These topics only be successfull only when the tablet is in recovery mode.So i tried to put my tablet into recovery mode by pressing vol + and power button.But there appears a android bot lying with red traiangle exlamation.So i simply tried to access recovery menu by pressing power and the vol + .But nothing happens neither than a dead android bot lying down with a red traiangle.
IS THERE ANYONE IN THE WORLD TO HELP ME!!!!.
Click to expand...
Click to collapse
I've been going nuts with the same problem!
THE SOLUTION for me was, get into recovery mode ie Dead Android with red exclamation then : HOLD POWER BUTTON and TAP the Vol + button, it may take a couple of go's but that then displays the missing menu!!
You can then navigate using the Vol +/- and Power = OK/Select and complete you factory reset
I found the solution on youtube:
youtube.com/watch?v=O6zffLTrQV4
It drove me nuts for hours!!
Hope this helps you
Warm Regards
Paul
Butlerpcs said:
I've been going nuts with the same problem!
THE SOLUTION for me was, get into recovery mode ie Dead Android with red exclamation then : HOLD POWER BUTTON and TAP the Vol + button, it may take a couple of go's but that then displays the missing menu!!
You can then navigate using the Vol +/- and Power = OK/Select and complete you factory reset
I found the solution on youtube:
youtube.com/watch?v=O6zffLTrQV4
It drove me nuts for hours!!
Hope this helps you
Warm Regards
Paul
Click to expand...
Click to collapse
Thanks a lot Paul, this worked for my Technipad 10 too.
Help
chan.sk said:
Hi,
I have a Chinese one too. (Onda XV610W) and the recovery procedure is as follows:
Power + Home until first start screen (normal droid)
Release Power, continue to hold Home
Android lying down with red triangle and exclamation mark will appear
Release Home and quickly press Home again
Recovery Screen will appear.
In the Recovery Screen, the navigation keys are as follows:
Vol+ for cursor up, Vol- for cursor down
Power for Enter
Home, for Exit Recovery and back to Android lying down with red triangle and exclamation mark, press and hold Power to shutdown
In your case, I would think the Vol+ will replace the Home key. So for yours it will be:
Power + Vol+ until first start screen (normal droid)
Release Power, continue to hold Vol+
Android lying down with red triangle and exclamation mark will appear
Release Vol+ and quickly press Vol+ again
Recovery Screen will appear.
In the Recovery Screen, the navigation keys are as follows:
Vol+ for cursor up, Vol- for cursor down
Power for Enter
To exit Recovery, there could be a menu item EXIT, or maybe using the Home key. It is probably written somewhere on the Recovery screen.
The key sequences might differ slightly from mine, so you may have to be patient and explore a bit. Patience and exploration was how I learnt to do mine. Good luck.
Click to expand...
Click to collapse
I have a tablet "KO PARA 1 FULL" which stuck in boot logo. Once i had tried recovery mode but now it does not appears... I do not have home button only Power, VOL +, VOL - ......how can i enter recovery mode again ?
sry for poor english !!
This may help
How to use the Chinese recovery menu:
http://www.sorexblog.altervista.org/recovery.php
https://www.youtube.com/watch?v=Tdc5SnSmx1I
Big thank you !
Butlerpcs said:
I've been going nuts with the same problem!
THE SOLUTION for me was, get into recovery mode ie Dead Android with red exclamation then : HOLD POWER BUTTON and TAP the Vol + button, it may take a couple of go's but that then displays the missing menu!!
You can then navigate using the Vol +/- and Power = OK/Select and complete you factory reset
I found the solution on youtube:
youtube.com/watch?v=O6zffLTrQV4
It drove me nuts for hours!!
Hope this helps you
Warm Regards
Paul
Click to expand...
Click to collapse
Just wanted to say thank you so much been trying to get into recovery last two day's and just keeped seeing press power and up witch I did, Then read your post about holding power then pressing up on and of worked a treat. Using Memo Pad 8 ! THANK YOU !
butlerpcs said:
i've been going nuts with the same problem!
The solution for me was, get into recovery mode ie dead android with red exclamation then : Hold power button and tap the vol + button, it may take a couple of go's but that then displays the missing menu!!
You can then navigate using the vol +/- and power = ok/select and complete you factory reset
i found the solution on youtube:
Youtube.com/watch?v=o6zffltrqv4
it drove me nuts for hours!!
Hope this helps you
warm regards
paul
Click to expand...
Click to collapse
you sir are a genius !!! I was going nuts with this problem until i found you post!!! Thank youuuuuu !!!!!!!!!!!!!!!!!!!!!! Using Doogee DG700 Titans 2 wiht Lollipop R16 official.
Thanks for all the thoughts and possibilities everyone.
Unfortunately, all this did for me was turn the power off! How on earth do you get past the dead android with the red triangle to go to the recovery menu on the DENVER TAC-70051 tablet? Who makes these crappy tablets anyway???? What is the darn logic in not having a documented procedure to enter recovery mode on these things? You cannot make this crap up!
Anyone have any other ideas?
CVAngelo said:
Thanks for all the thoughts and possibilities everyone.
Unfortunately, all this did for me was turn the power off! How on earth do you get past the dead android with the red triangle to go to the recovery menu on the DENVER TAC-70051 tablet? Who makes these crappy tablets anyway???? What is the darn logic in not having a documented procedure to enter recovery mode on these things? You cannot make this crap up!
Anyone have any other ideas?
Click to expand...
Click to collapse
What you are seeing is the default android kernel panic mode. This comes from hacked together versions of Android mostly out of Asia. The reason they are this way is to bypass copyright issues. They most likely removed the recovery partition from the device. As well as all hardware key combos for the recovery.
Please help...!!!
Recovery mode not showing on my android tablet china only android logo show up...
ezzan said:
Please help...!!!
Recovery mode not showing on my android tablet china only android logo show up...
Click to expand...
Click to collapse
Once again you may not be seeing it because there is no recovery in the tablet. Not an uncommon thing for knock off devices.
Butlerpcs said:
I've been going nuts with the same problem!
THE SOLUTION for me was, get into recovery mode ie Dead Android with red exclamation then : HOLD POWER BUTTON and TAP the Vol + button, it may take a couple of go's but that then displays the missing menu!!
You can then navigate using the Vol +/- and Power = OK/Select and complete you factory reset
I found the solution on youtube:
youtube.com/watch?v=O6zffLTrQV4
It drove me nuts for hours!!
Hope this helps you
Warm Regards
Paul
Click to expand...
Click to collapse
Damn, I wish I've read your reply on 2013
my chinese android tablet instead of booting to recovery boot into MMI test after i press power + vol up. any help pls. i wanted to wipe it bcos i forgot the pattern to unlock it
!!!Sorry mistake, wrong thread!!! can be deleted
Hello,
I cannot find a way how to enter to recovery mod.
Mobil is after upgrade to Lollipo(5.0.2), software version v20a-EUR-XX and HW LG-D405n.
Using procedure Volume down+power button(in certain combination) , but unsuccessfully.
I can get only the screen with exclamation mark in red triangle over android logo.
Any idea how to fix this problem?
BlaMa said:
!!!Sorry mistake, wrong thread!!! can be deleted
Hello,
I cannot find a way how to enter to recovery mod.
Mobil is after upgrade to Lollipo(5.0.2), software version v20a-EUR-XX and HW LG-D405n.
Using procedure Volume down+power button(in certain combination) , but unsuccessfully.
I can get only the screen with exclamation mark in red triangle over android logo.
Any idea how to fix this problem?
Click to expand...
Click to collapse
You can reboot to recovery via flashify app or following key combination: -
Power of your phone press both Volume Down + Power Button same time, As soon as the LG logo appears release both buttons and immediately press and hold same buttons (Volume Down+Power) again. Now Factory data reset screen will appear saying "Erase all user data & restore default settings?". Use volume down key to select "Yes" and press power button to confirm and now you should be in recovery