Related
So i waited for Verizon to do and OTA update for my Droid Eris beause i didn't want to take the chance of rooting it. However i'm tired of the little lag i get with this phone and i want to overclock it, too bad i need to root it. So i have a few questions.
1. What roms will work my Droid Eris. (I know they're everywhere but some people say they don't work, bugged, etc. Which one is the most dependent)
2. Is there a video guide anywhere that can show me how to root. (Again i know there's guides but i prefer a visual guide if I'm gonna take the risk of bricking my phone)
3. If anyone has overclocked their Droid Eris what is a safe GHZ and what ap works the best with this?
4. I've been reading that i will most likely have to downgrade my Droid Eris to 1.5 stock from 2.1 OTA update. Is there a way to do such a thing. There is a guide but it says something like it doesn't work anymore, unless im reading it wrong.
5. Just a question i've been wondering since recently, When could i be expecting a Froyo Rom if at all.
Yes, i know these are noob questions but i just recently got a Droid Eris and i want to take full advantage of this device. Thank you for your time reading this and Thank you again if you respond nicely and don't call me a noob.
1. Any of the ROMs. Choosing one is a matter of personal preference. The two I've been using lately are EvilEris 3.0 and CyanogenELB 2.5 (ErisLightningBolt). EvilEris is a Sense rom and looks a lot like the standard HTC OS you're used to. CyanogenELB is based off the standard android sources. CyanogenELB takes a little extra work to get it really workable (adding the google apps and installing the MMS fix with for 2.5) but it's pretty darn good.
2.Video: youtube.com/watch?v=_brg2NbBmx8 Can't post links but you can copy and paste. Any guide for 1.5 will work with 2.1 OTA.
3. Overclocking is dependent on your phone. Numerous reports say staying at or below 768MHz is safe for all phones. Just about everyone uses SetCPU which you can find in the Market for pay or on this forum for free.
4. You do NOT have to downgrade to root. Use the same 1.5 procedure to root a 2.1 OTA phone.
5. Read the KaosFroyo thread. It's a work in progress and loads, but doesn't function as a phone. He's busy with work, so kaos will work on it when time allows.
Thank you so much, Just helped me out alot. I really hope this goes well and i don't have that lag anymore(Extremely annoying). Thank you, seriously
So i have EvilEris on my phone now, works great and everything however i want to try the CyanogenELB 2.5 rom but I'm not sure what i have to download from the site...pretty noobish i guess. The thing im trying to say is a the download site he gives theres about 7 files and im not exactly sure what to download. I don't wanna flash the wrong thing and brick my phone. If you could point me in the right direction it would be appreciated.
dl CyanogenELB2.5.zip, CyanogenELB-GoogleApps-v2.zip, CyanogenELB-MMS-fix.zip, 5MPcamera.zip, and ClearVM.zip.
flash CyanogenELB2.5.zip and then flash CyanogenELB-GoogleApps-v2.zip (do NOT reboot in between those 2 flashes).
then, reboot phone... after you setup (google account, etc), shutdown and then flash the CyanogenELB-MMS-fix.zip, the 5MPcamera.zip, and ClearVM.zip (no need to reboot in between those either). then restart again.
should be good to go from there
tenzomonk said:
dl CyanogenELB2.5.zip, CyanogenELB-GoogleApps-v2.zip, CyanogenELB-MMS-fix.zip, 5MPcamera.zip, and ClearVM.zip.
flash CyanogenELB2.5.zip and then flash CyanogenELB-GoogleApps-v2.zip (do NOT reboot in between those 2 flashes).
then, reboot phone... after you setup (google account, etc), shutdown and then flash the CyanogenELB-MMS-fix.zip, the 5MPcamera.zip, and ClearVM.zip (no need to reboot in between those either). then restart again.
should be good to go from there
Click to expand...
Click to collapse
MMS doesn't work with the installed SMS app; the dev's notes say "must use Handcent".
Also, I can't get the IME_mod keyboard to do anything but FC ... do you have the same result?
Thanks Tenzo it works and everything but i think im gonna go back to EvilEris since i get a lag every now and then for some reason and sometimes it just reboots on itself. Thanks for the help though
I think I'm one step from an expensive paperweight.
I Odined CWMRecovery_DJ05_DL09.tar.md5, flashed adrynalyne's update.zip, applied ChainDDs superuser, then flashed Superclean 2.9.
I got stuck in a bootloop between "SAMSUNG" and CWM's recovery.
I backed up, wiped Data and Cache then tried to reboot back to stock and have gotten only as far as the stock recovery.
I'm trying to download DI01package3.tar.md5 but the damn thing keeps getting stuck at 83.7mgs.
Anyone have any suggestions or am I SOL?
Also, which kernel should I use with which ROM bc I'm really lost there...especially after this.
UPDATE
I found DJ05.tar.md5, Odined it and repowered up the phone. It's back to basics, but it's ALIVE!!!
From what I've read, Adrynalyne's DI01package... is a safer bet, but this one works so far.
Noobs like me: I'm going to try to find and explain as best I can the CORRECT way to root your Fascinate and avoid a dumbass mistake like I made.
To the devs, mods and everyone who wrote on this earlier, THANK YOU!!
So I just rooted my wife's phone and froze as many apps as I could without glitching the system out with TB. The phone was super laggy from the box but now it seems better but she said today that it froze on her a couple times. I come from a Droid X with GB 2.3 rooted and it's pretty fast for me. Even when it was stock it was quick. I'm not sure what else to do. Since it's my wife's I would rather leave it as close to stock as possible. Any suggestions.
Also is there a list of apps that can be froze in TB without causing other issues. It may be possible I froze one to many.
Thanks for your time.
Terry
Divey1130 said:
So I just rooted my wife's phone and froze as many apps as I could without glitching the system out with TB. The phone was super laggy from the box but now it seems better but she said today that it froze on her a couple times. I come from a Droid X with GB 2.3 rooted and it's pretty fast for me. Even when it was stock it was quick. I'm not sure what else to do. Since it's my wife's I would rather leave it as close to stock as possible. Any suggestions.
Also is there a list of apps that can be froze in TB without causing other issues. It may be possible I froze one to many.
Thanks for your time.
Terry
Click to expand...
Click to collapse
I would suggest you follow this link here
http://forum.xda-developers.com/showthread.php?t=1048380
Download and flash one of the "DEBLOATED/DEODEXED"
These types of ROM's are completely stock just with all of the crap removed (bing and the VZW bloatware)
Shark has the thread updated to the 12th of June so they should be up-to-date.
Cheers
gkirby11 said:
I would suggest you follow this link here
http://forum.xda-developers.com/showthread.php?t=1048380
Download and flash one of the "DEBLOATED/DEODEXED"
These types of ROM's are completely stock just with all of the crap removed (bing and the VZW bloatware)
Shark has the thread updated to the 12th of June so they should be up-to-date.
Cheers
Click to expand...
Click to collapse
I read over it all and my wife's phone is ED04 which is not in his list. I think this is exactly what I am looking for. I understand most of it except the modem stuff. There are so many numbers and versions to use. This is so different than my droid x. If I would have started with her phone first, I probably would have never attempted to mod it. Anyways what should I do now? Would it be better to flash a rom that's not stco but stable and fast. Just for giggles I did a quadrant test on hers and mine. She barely broke 900 while mine is over 1900. Seems like a huge difference being both are 1g processors.
Thanks for the help.
Terry
Barely breaking 900 is normal if you are not using a voodoo enabled kernel. The rfs partition is what is the biggest bottleneck. If you truly want a snappy rom, jump to comrom or evil fascinate. I use both equally and both will give you the speed you are wishing to match from your dx. As for modems, your wife's modem is compatible with either rom I mentioned.
For now I would suggest keeping her phone froyo based as gb is still being worked on by our awesome devs, but isn't for the faint at heart just yet IMHO
Dalamar1320 said:
Barely breaking 900 is normal if you are not using a voodoo enabled kernel. The rfs partition is what is the biggest bottleneck. If you truly want a snappy rom, jump to comrom or evil fascinate. I use both equally and both will give you the speed you are wishing to match from your dx. As for modems, your wife's modem is compatible with either rom I mentioned.
For now I would suggest keeping her phone froyo based as gb is still being worked on by our awesome devs, but isn't for the faint at heart just yet IMHO
Click to expand...
Click to collapse
Perfect, exactly what's needed. So do I follow these steps even tho is says from ED01.
Install Instructions:
If you are coming from a stock ED01 non rooted build follow these instructions:
Download Evil Fascination and place it on your SD card
Download Odin: http://www.mediafire.com/?msnc375idu7xhqt
Download Recovery: http://www.mediafire.com/?pfuhk4ibn9uore3
Install Samsung Drivers for your pc: http://forum.xda-developers.com/showthread.php?t=779238
Remove battery from the phone
Connect the phone up through USB and hold volume down during the connection
Your phone will be in download mode
Open up Odin and click on the pda button and select the recovery file
Click Start on Odin - phone will reset when flashed
Hold volume up and down and insert battery back into the phone and boot it up. Hold volume up and down while it boots up and it will boot into CWM recovery. If it has boot up to the startup animation you will need to start over and reflash recovery through odin
When you are in CWM recovery continue with the instructions below.
If so I'm ready to flash it.
Thanks
Terry
Yeah that looks good. Just use Odin (pda button) to flash your recovery. (Ensure you are using the PDA button. Cannot emphasize that enough)
Then follow the steps outlines. You're good to go.
Dalamar1320 said:
Yeah that looks good. Just use Odin (pda button) to flash your recovery. (Ensure you are using the PDA button. Cannot emphasize that enough)
Then follow the steps outlines. You're good to go.
Click to expand...
Click to collapse
Thanks a million. Will update after flash.
Terry
Just to make sure since there are a million different downloads is this the right one to download. (highlighted in red is the one)
CR 2.0
These versions will wipe your data, so make sure you back it up
This version contains the EC01 modem/radio and imnut's 05/31 PBJ -50mv nonvoodoo kernel
This version contains no modem/radio and imnuts' 05/31 PBJ -50mv nonvoodoo kernel
So this one would be without the kernel which is the modem/radio.
Then I do this patch for 2.1
Com Rom (froyo) 2.1 (patch, must flash on top of 2.0, no need to wipe):
md5: 725f94fa1cad7e562a767cd61ecd590b
And then this theme.
[THEME] Crysis Revolution v4.0 *Community ROM 2.1!* *6.20.11*
Is this all correct and in the right order. I want to 100% sure before I do this. Man is it so much different than flashing my DX.
Thanks
Terry
Divey1130 said:
Just to make sure since there are a million different downloads is this the right one to download. (highlighted in red is the one)
CR 2.0
These versions will wipe your data, so make sure you back it up
This version contains the EC01 modem/radio and imnut's 05/31 PBJ -50mv nonvoodoo kernel
This version contains no modem/radio and imnuts' 05/31 PBJ -50mv nonvoodoo kernel
So this one would be without the kernel which is the modem/radio.
Then I do this patch for 2.1
Com Rom (froyo) 2.1 (patch, must flash on top of 2.0, no need to wipe):
md5: 725f94fa1cad7e562a767cd61ecd590b
And then this theme.
[THEME] Crysis Revolution v4.0 *Community ROM 2.1!* *6.20.11*
Is this all correct and in the right order. I want to 100% sure before I do this. Man is it so much different than flashing my DX.
Thanks
Terry
Click to expand...
Click to collapse
this looks fine, no need to worry about the radio I believe it will use the one from whatever baseband you're at before you flash (ED04 I believe you said) or you can flash the one with ED01 radio... yes ComRom with imnuts' PBJ kernel is good, I would suggest the voodoo kernel one but its up to you, patch on top of that then theme after and you should be set
tapatalked from my GINGERBANGED Fascinate
As anoninja said. You should be good to go. Thing to keep in mind is that it is very difficult to brick your fascinate. Not impassible. But difficult. As long as you stay with fascinate files, never try captivate, vibrant, i9000, etc, stuff, then worse case scenario, you may have to odin back to stock and try again, but even that's unlikely. Good luck. Keep us posted with your progress
Sent from my SCH-I500 using XDA App
Hey thanks guys, feels better knowing it's not so easy to screw my phone up. I read a little about voodoo before work and yes, I do want to have it. So the majic question is, which one.
Thanks
Terry
Well if you choose evil fascination with the kernel, I think out will automatically convert you to voodoo so no extra steps other then to wait for the conversion after it boots.
Sent from my SCH-I500 using XDA App
After doing some more research I have decided to go with Com Rom 2.0 then patched to 2.1.
I am going to go with this one:
*Fixed* UKB 2.0 with -50 PBJ Voodoo Kernel ***6.4.11 (script fixed)
md5: 1092A4F02F668521D633670A80BA127C
My wife doesn't like the all black theme on the evil rom. Now I am still a little confused on the kernel thing. I have been reading for awhile now and will continue to do so. I'm not understanding if I have to flash the kernel first or rom first. I have been through the fascinate development thread over and over and while most put "how to's" in them, I still don't understand in which order things should go. There is so much to do just to flash a rom on this phone. But I know I will get it done even if I have to start over from fresh. So many roms, kernels, updates, 2.2.3.4.6._______, etc, etc...... What exactly is a kernel? I come from the droid x back ground where we root, cwr, then flash. That's it. Also to me Odin seems to be a 3rd party app that's needed to flash CWR. Other than that is there any other use for it. Sorry for all the ?'s but I like to do my homework before I do something like this. I am a pretty good self learner but the way things are worded for the phone is a little confusing at times. Maybe a step by step list if starting fresh.
EX- 1-root
2-odin
3-cwr
4-kernel or rom or both
Something like that would be easier to understand. Anyways I always appreciate any help I get.
Thanks
Terry
Divey1130 said:
After doing some more research I have decided to go with Com Rom 2.0 then patched to 2.1.
I am going to go with this one:
*Fixed* UKB 2.0 with -50 PBJ Voodoo Kernel ***6.4.11 (script fixed)
md5: 1092A4F02F668521D633670A80BA127C
My wife doesn't like the all black theme on the evil rom. Now I am still a little confused on the kernel thing. I have been reading for awhile now and will continue to do so. I'm not understanding if I have to flash the kernel first or rom first. I have been through the fascinate development thread over and over and while most put "how to's" in them, I still don't understand in which order things should go. There is so much to do just to flash a rom on this phone. But I know I will get it done even if I have to start over from fresh. So many roms, kernels, updates, 2.2.3.4.6._______, etc, etc...... What exactly is a kernel? I come from the droid x back ground where we root, cwr, then flash. That's it. Also to me Odin seems to be a 3rd party app that's needed to flash CWR. Other than that is there any other use for it. Sorry for all the ?'s but I like to do my homework before I do something like this. I am a pretty good self learner but the way things are worded for the phone is a little confusing at times. Maybe a step by step list if starting fresh.
EX- 1-root
2-odin
3-cwr
4-kernel or rom or both
Something like that would be easier to understand. Anyways I always appreciate any help I get.
Thanks
Terry
Click to expand...
Click to collapse
yes odin is a 3rd party program used to push installs, and most roms nowadays will root you and install kernel (most come with it built in unless otherwise specified) when you flash them so no worries about rooting or kernels... a little about voodoo here:
http://forum.xda-developers.com/showthread.php?t=1043673&highlight=voodoo
http://forum.xda-developers.com/showthread.php?t=1039897&highlight=voodoo
and you can read about what all these 'roms', 'radios' and 'kernels' are here (i wouldn't get any downloads from here as this is old):
https://docs.google.com/document/d/...XcM268FoIzk/edit?hl=en&authkey=CKqWypcP&pli=1
I'll try and make it simple, this is how I did it and had no problems:
1. obvious step, have all the driver, programs and packages you need ready to go: samsung drivers and odin on your pc, both ComRom 2.0 and 2.1 patch on sd card
2. assuming you're already on EB01 froyo baseband or higher, you wanna use odin to install CWR
3. from CWR make any backups you want then wipe data/cache/dalvik
4. flash .zip of rom you want (ComRom 2.0), select reboot phone once to ensure it took. Since you're flashing a voodoo kernel on first boot you should hear a robot lady saying she's formatting partitions, this may take a while but its normal
5. once it started up power phone off and boot again into CWR (or use power button menu to boot straight there with 'recovery' option)
6. flash .zip of ComRom patch, no wiping needed and select reboot phone
7. congrats you're rooted, voodoo'd and running ComRom 2.1
tapatalked from my GINGERBANGED Fascinate
anoninja118 said:
yes odin is a 3rd party program used to push installs, and most roms nowadays will root you and install kernel (most come with it built in unless otherwise specified) when you flash them so no worries about rooting or kernels... a little about voodoo here:
http://forum.xda-developers.com/showthread.php?t=1043673&highlight=voodoo
http://forum.xda-developers.com/showthread.php?t=1039897&highlight=voodoo
and you can read about what all these 'roms', 'radios' and 'kernels' are here (i wouldn't get any downloads from here as this is old):
https://docs.google.com/document/d/...XcM268FoIzk/edit?hl=en&authkey=CKqWypcP&pli=1
I'll try and make it simple, this is how I did it and had no problems:
1. obvious step, have all the driver, programs and packages you need ready to go: samsung drivers and odin on your pc, both ComRom 2.0 and 2.1 patch on sd card
2. assuming you're already on EB01 froyo baseband or higher, you wanna use odin to install CWR
3. from CWR make any backups you want then wipe data/cache/dalvik
4. flash .zip of rom you want (ComRom 2.0), select reboot phone once to ensure it took. Since you're flashing a voodoo kernel on first boot you should hear a robot lady saying she's formatting partitions, this may take a while but its normal
5. once it started up power phone off and boot again into CWR (or use power button menu to boot straight there with 'recovery' option)
6. flash .zip of ComRom patch, no wiping needed and select reboot phone
7. congrats you're rooted, voodoo'd and running ComRom 2.1
tapatalked from my GINGERBANGED Fascinate
Click to expand...
Click to collapse
You are the shiz nik. Perfectly worded and the timing couldn't have been better. Phone has both files ready to go. I found some more literature on kernels and now understand what it does. Pretty much controls performance of the phone. And I see roms with and without kernels. For my first time with this phone I will go with a kernel/rom. The radio is stock ED04 which I will leave stock. Will update after I finish all of this. My wife will be stoked now that her phone will run smoothly. Thanks for the detailed explanation for me.
Terry
Divey1130 said:
You are the shiz nik. Perfectly worded and the timing couldn't have been better. Phone has both files ready to go. I found some more literature on kernels and now understand what it does. Pretty much controls performance of the phone. And I see roms with and without kernels. For my first time with this phone I will go with a kernel/rom. The radio is stock ED04 which I will leave stock. Will update after I finish all of this. My wife will be stoked now that her phone will run smoothly. Thanks for the detailed explanation for me.
Terry
Click to expand...
Click to collapse
no problem, good luck
tapatalked from my GINGERBANGED Fascinate
I just wanted to thank all of you that helped me here. Running Com Rom 2.0 w/2.1 patch. It's nite and day compared to how the phone was. So much smoother and no lags as of yet. My wife couldn't be happier now with the phone working like it should be. I did encounter one issue tho. I could not create a backup. It would read an error message. (forgot what it said) Anyways thanks a million for the help. The crt animation is awesome and I love the functions when powering off. Rebooting instead of powering off then on and especially booting into recovery without pushing the volume rocker. Well I am going to add a theme for her so richen it up and go from there.
Just got it to backup as I was typing this. After reading thread after thread it seemed like you either had to flash a kernel other than stock or flash a rom before it would back up. I even tried red, blue, and purple with no luck. Oh well at least now it's backed up.
Terry
Divey1130 said:
I just wanted to thank all of you that helped me here. Running Com Rom 2.0 w/2.1 patch. It's nite and day compared to how the phone was. So much smoother and no lags as of yet. My wife couldn't be happier now with the phone working like it should be. I did encounter one issue tho. I could not create a backup. It would read an error message. (forgot what it said) Anyways thanks a million for the help. The crt animation is awesome and I love the functions when powering off. Rebooting instead of powering off then on and especially booting into recovery without pushing the volume rocker. Well I am going to add a theme for her so richen it up and go from there.
Just got it to backup as I was typing this. After reading thread after thread it seemed like you either had to flash a kernel other than stock or flash a rom before it would back up. I even tried red, blue, and purple with no luck. Oh well at least now it's backed up.
Terry
Click to expand...
Click to collapse
sucks about the backup, the voodoo lagfix CWR versions are known to have problems with this and unfortunately I forgot to mention this, I tend to not do nandroid backups since I don't keep much on my phone in terms of data and apps, being the flashaholic that I am lol anyway good that you got it up and running, its good stuff and a million times better than stock
tapatalked from my GINGERBANGED Fascinate
I am currently running comrom 2.1 with OTB 1.6 kernel. Looking to go with the flow on updates lol. Wanting to get everyones opinion. Should I switch? If so, how about should I do that? Don't want to mess anything up on my phone
powerstroke said:
I am currently running comrom 2.1 with OTB 1.6 kernel. Looking to go with the flow on updates lol. Wanting to get everyones opinion. Should I switch? If so, how about should I do that? Don't want to mess anything up on my phone
Click to expand...
Click to collapse
Well the first thing you should do is read, read, and read again on the CM7 test build thread along with the waiting room in the general thread. For every handful of success stories there are even more horrible failures.
Another question you should ask yourself is why are you considering switching? Because you know, understand, and like CM7 features? Or because you have seen endless posts on here about how it is now working?
Believe me I love CM7. I ran it for my daily driver for a few months back when 60% of it didn't function. Now that it is in TEST build 10 (still not full release like Ultimate Kang bang 2.1 that you are running) people are flashing it like it is a full RC. They are also having terribly problems and soft bricked phones more than an Touchwiz based ROM at the moment.
If you really like CM7 features, understand the process for flashing an MTD/BML ROM, and feel prepared for the worst then go for it. If it is successful for you it will change your whole perception of the Fascinate. Add on the new Glitch V11.1 kernel and you will never run anything else!!
...If you are just flashing it because it is the flavor of the week... I'd wait till it is in nightlies before flashing. Just reduces the chances of an oh-s#%t-moment happening.
powerstroke said:
I am currently running comrom 2.1 with OTB 1.6 kernel. Looking to go with the flow on updates lol. Wanting to get everyones opinion. Should I switch? If so, how about should I do that? Don't want to mess anything up on my phone
Click to expand...
Click to collapse
I was exactly where you are 24 hours ago myself. I took the plunge and I'm glad I did. CM7 is the best thing that has ever been on my phone. I had zero installation problems. I haven't even tried the new 1.7ghz kernel yet. Got nems 1.6 though doing nicely. While I echo the precautions of the prior post I whole heartedly endorse the switch
Sent from my SCH-I500 using XDA Premium App
gkirby11 said:
Well the first thing you should do is read, read, and read again on the CM7 test build thread along with the waiting room in the general thread. For every handful of success stories there are even more horrible failures.
Another question you should ask yourself is why are you considering switching? Because you know, understand, and like CM7 features? Or because you have seen endless posts on here about how it is now working?
Believe me I love CM7. I ran it for my daily driver for a few months back when 60% of it didn't function. Now that it is in TEST build 10 (still not full release like Ultimate Kang bang 2.1 that you are running) people are flashing it like it is a full RC. They are also having terribly problems and soft bricked phones more than an Touchwiz based ROM at the moment.
If you really like CM7 features, understand the process for flashing an MTD/BML ROM, and feel prepared for the worst then go for it. If it is successful for you it will change your whole perception of the Fascinate. Add on the new Glitch V11.1 kernel and you will never run anything else!!
...If you are just flashing it because it is the flavor of the week... I'd wait till it is in nightlies before flashing. Just reduces the chances of an oh-s#%t-moment happening.
Click to expand...
Click to collapse
Great answer!
powerstroke, like he said; read, read, and read some more. that's what i did. and i ended up going for it, and so far i am not looking back. Just prepare yourself with backup plans in case something goes wrong.
From my point of view, I'm enjoying CM7 as least as much more than CommRom as I enjoyed CommRom more than Stock. I'd say that it's CM7 from here on out for me, except that's what I said about CommRom not too long ago. Who knows what the Devs will come up with next?
I liked CM7 but the low in call volume and the sucky AOSP camera made me go back to CommRom 2.1 with EC09 radio.
i agree, just read up like crazy so you don't mess anything up but take the plunge if your prepared. i went from just stock, debloated ed01 to the latest cm7 and i've had no problems. look up omfgb though because i'm waiting for that one to be more functional and i'm probably gonna switch to it
Give miui a shot to. It's pretty.
Fascinatemtd MIUI 1.7.15 - Glitch v11.1
Ok awesome guys appreciate all the info. I think I'm going to give it a whirl. Main question I have now is, what is the easiest and safest way to switch over to that rom from where I am now? Just do the factory reset, wipe cache, and wipe dalvik cache? Then flash the CM7 rom through recovery? or something else? Just want to make sure I do it right lol
^^^
That's why everyone said read.....
Ha...No **** lol. I understood that part but for people that might have already switched between those roms might have other suggestions. No need to be a smartass
Well since your being a smartass, lol, want to find me a forum that specifically shows how to switch from a froyo rom to cm7????
powerstroke said:
Well since your being a smartass, lol, want to find me a forum that specifically shows how to switch from a froyo rom to cm7????
Click to expand...
Click to collapse
Easy, try the thread for the CM7 ROM in the development section. jt covers it in the op, and there are several more specific walkthroughs in the the thread.
provided by Land Shark:
(coming from stock DL09)
1. Power down phone, pull battery
2. ODIN EC09 modem, pull usb cord, close ODIN
3. Reopen ODIN, connect USB, flash fixed CWM 4 from OP of CWM7 thread (here: http://forum.xda-developers.com/showpost.php?p=14554015&postcount=1)
3. Close ODIN, pull usb cord, put battery back in phone, hold volume up, volume down, and power buttons but release all three as soon as you see samsung logo flash for the second time
4. Flash CM7 07/13 build and GAPPs (Google Apps) from OP
5. Reboot phone, wait for ROM to fully boot and load, finish setting up phone with contacts, apps, etc., profit.
ok..followed your instructions. now im in a loop when its trying to flash. "waiting for sd card to mount" over and over. counting down in seconds? what should i do?
If you are serious about diving into cm7 read all u can I red for 3 days. Nearly 2500 posts and its knowledge I'll need should anything not go smooth you may have one glitch that u try and fix mess that up and its steam rolls into a long process but if u follow word for word and know exact orders of Odin and flashes and how to get to the proper cwm its beautiful just make sure ur beyond prepared before the first click that's about the best advice I can give 2cents are now in the pot
JOrtenzi said:
provided by Land Shark:
(coming from stock DL09)
1. Power down phone, pull battery
2. ODIN EC09 modem, pull usb cord, close ODIN
3. Reopen ODIN, connect USB, flash fixed CWM 4 from OP of CWM7 thread (here: http://forum.xda-developers.com/showpost.php?p=14554015&postcount=1)
3. Close ODIN, pull usb cord, put battery back in phone, hold volume up, volume down, and power buttons but release all three as soon as you see samsung logo flash for the second time
4. Flash CM7 07/13 build and GAPPs (Google Apps) from OP
5. Reboot phone, wait for ROM to fully boot and load, finish setting up phone with contacts, apps, etc., profit.
Click to expand...
Click to collapse
well this is what i did and still have problem!!!!!!!!! T.T
1) odin ebo1 with atlas pit 2.2
2) cwr blue on CM7(jt site)
3) installed cm7 latest one 7/17
4) now stuck on cm7 logo and just stuck there... nothing happens ........... any HELP????????!!!!!!
izzjkjoe said:
well this is what i did and still have problem!!!!!!!!! T.T
1) odin ebo1 with atlas pit 2.2
2) cwr blue on CM7(jt site)
3) installed cm7 latest one 7/17
4) now stuck on cm7 logo and just stuck there... nothing happens ........... any HELP????????!!!!!!
Click to expand...
Click to collapse
This works for me, but in step 2. I odin cwr 3-30 fix all. immediately Boot into it and wipe everything, then flash the 7/4 build, from there use cm7 recovery from power button to flash newest build w/o wiping...worked multiple times for me.
Sent from my SCH-I500 using XDA App
I was on com rom with ed04 radio, i just did the 3 wipes and install miui zip, takes less than 5mins.
Sent from my I500 using XDA Premium App
Hello XDA,
Let me start by first saying that I am pretty much a complete noob to all of this. So I apologize in advance for insulting any of you with my stupidity when it comes to the subject.. Anyway, here we go...
I have had my SGS2 for a while but finally worked up enough courage to flash after reading all the positive reviews about it. I followed this guide http://forum.xda-developers.com/showthread.php?p=18576627#post18576627 and used methods 2c and 3a.
I was able to preform the root with absolutely no problems. Everything was great. I had a little trouble finding a kernel for 3a, but ended up trying out Siyahs (http://forum.xda-developers.com/showthread.php?t=1367800). After installing the Kernel everything was still working great. The last thing I wanted to try was a new ROM. The ROM i wanted to try was the Cyanogen mod (http://forum.cyanogenmod.com/forum/494-samsung-galaxy-s-ii-att-experimental-mod/)
When I used CWM to install the mod the phone restarted and came back on showing the SGS2 boot screen... only to stay on the SGS2 boot screen. Nothing happens. The phone just stays on showin the boot screen. I've let it stay like this for 20 minutes now and nothing is happening.... did I break the phone? Whats the problem...
I've never flashed or used cyanogem mod. Did you flash CM7 or CM9? With CM7, I've read lots of posts where they say you have to flash twice. So I'd try flashing it again. Tell us exactly what you flashed. Maybe someone who knows that rom can pitch in with help.
You didnt flash the rom or recovery from ROM Manager did you??
Sounds like your in the same boat mine was in up until this afternoon.
Get Odin and try to use the one click installers to return to root and start over with the proper directions.. (You can find all the software you need in creepycrawlers Download Repository link in his sig)
creepyncrawly said:
I've never flashed or used cyanogem mod. Did you flash CM7 or CM9? With CM7, I've read lots of posts where they say you have to flash twice. So I'd try flashing it again. Tell us exactly what you flashed. Maybe someone who knows that rom can pitch in with help.
Click to expand...
Click to collapse
Thanks for the quick responses guys. What I did was turn the phone off, and hold volume up+down to get into CWM. I then restored my backup I had made right before trying to install cyanogen mod and luckily everything works normally. Phone looks good and smooth. I have to say though I am really nervous to try and flash another rom. I want something nice for my i777 but can't find anything. Does anyone have a suggestion for a decent rom?
ROM Suggerstion
Treydor said:
Thanks for the quick responses guys. What I did was turn the phone off, and hold volume up+down to get into CWM. I then restored my backup I had made right before trying to install cyanogen mod and luckily everything works normally. Phone looks good and smooth. I have to say though I am really nervous to try and flash another rom. I want something nice for my i777 but can't find anything. Does anyone have a suggestion for a decent rom?
Click to expand...
Click to collapse
You might want to try Batista Foxhound http://forum.xda-developers.com/showthread.php?t=1486199&highlight=foxhound. Like me, I'm very particular about the sound of the media player. If you want the best sound, flash CM7 RC1. Install power amp and play with the CM7 DSP manager and power amp equalizer and there is not a single ROM out there that can match the sound quality of this two combination. Good luck.