Anyone have a ultimate setting for saving battery life in SETCPU for the Motorola Photon?
Bump.. Just bought it myself will read more into it... But if someone has a quick down and dirty on settings for the photon would be appreciated... I did do some initial settings but felt the screen was getting too hot so I aborted the settings I applied.
I stopped using setcpu back when i had an HTC hero (2009). You really don't need it imo lol. Wanna save battery, use an undervolt kernel or turn off mobile data when you're not using it. You could also turn off auto background data sync.
Will look into it, just seemed that the percentage based rules looked attractive inthe program.. Always nice to be able to apply less than rules, greater than etc..
And if you're drinkin' well, you know
That you're my friend and I say
I think I'll have myself a beer
Don't think an app can control our cpu. I've tried setting frequencies only to have them ignored, pretty sure some programs will have the under volt ignored.
Sent from my MB855 using XDA Premium App
Set cpu undervolting my photon def works.. I did notice (not recently though) that under a lot of stress while undervolted itll kick up to a higher voltage though I havnt seen it do that for a long time now..
Sent from my MB855 using xda premium
So there is or is not good reason to use setcpu on the photon?
tcf84 said:
So there is or is not good reason to use setcpu on the photon?
Click to expand...
Click to collapse
Its all based on the personal preference man. If you feel the need to use it go ahead. Myself, I don't think its necessary. I mean it's good for setting profiles in different situations (screen on/off,charging etc). Most of the time the kernels baked in settings are good enough but some people combine a custom kernel with setcpu for maximum control over CPU. Setcpu is absolutely pointless unless you're running a custom kernel. Plus if you use cyanogen roms it will allow you to set CPU values within the rom. Again, these are just my thoughts on it man.
Well I'm in the process of trying to get CM9 working, so I guess I wouldn't need it.
Thanks for the clarification.
Can I ask, how did you UV your cpu ? is it somewhere within the setcpu, or it comes from the kernel ? I really don't understand about ocing/uving an android phone, thx.
El-Nath said:
Can I ask, how did you UV your cpu ? is it somewhere within the setcpu, or it comes from the kernel ? I really don't understand about ocing/uving an android phone, thx.
Click to expand...
Click to collapse
Custom kernels will allow you to over clock or undervolt. Set CPU just allows you to set clock speed upon boot along with custom profiles. If you install a kernel that allows undervolting it should have the custom values baked in. Again, use set CPU if you please. Joker has a set of custom kernels both uv/oc. I'm using his 1.3 oc kernel for CM7 at the moment but I'm only clocked at 1.2 just testing out. So far its amazing.
tcf84 said:
Well I'm in the process of trying to get CM9 working, so I guess I wouldn't need it.
Thanks for the clarification.
Click to expand...
Click to collapse
How did this work out for you? Where's the install? Desperate to give it a try.
bigstar3 said:
How did this work out for you? Where's the install? Desperate to give it a try.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1413349
Doesn't voltage control also work? When I was using my Epic4g, i preferred voltage control over setcpu since it does both: OC and UV.
However, I'd agree with kennypow3rs that i dont think any of it is necesary with the Photon. It's quite fast already and the battery life is amazing. I hacked my Epic 4g like crazy, through 10 ROMs, OC/UV, Eclair through GB, and I have to say, it was a waste of my time. I am now extremely happy to have the Photon, stock and rooted.
lancelot916 said:
Doesn't voltage control also work? When I was using my Epic4g, i preferred voltage control over setcpu since it does both: OC and UV.
However, I'd agree with kennypow3rs that i dont think any of it is necesary with the Photon. It's quite fast already and the battery life is amazing. I hacked my Epic 4g like crazy, through 10 ROMs, OC/UV, Eclair through GB, and I have to say, it was a waste of my time. I am now extremely happy to have the Photon, stock and rooted.
Click to expand...
Click to collapse
I've been where you've been, done what you've done, and am now at where you're at and I couldn't be happier myself.
kennypow3rs said:
http://forum.xda-developers.com/showthread.php?t=1413349
Click to expand...
Click to collapse
thanks man!
I prefer to use this instead of the ones built in to cm7/9, personal preference i guess.
But the only real reason i use it is for the profiles feature. Which i set my phone to screen off to max at 216mhz(wish i could auto disable while using Pandora), then to any time below 100% battery to max 750mhz (with jokers kernel that disables the 2nd core) and then finely to run full speed when its plugged in.
kennypow3rs said:
Custom kernels will allow you to over clock or undervolt. Set CPU just allows you to set clock speed upon boot along with custom profiles. If you install a kernel that allows undervolting it should have the custom values baked in. Again, use set CPU if you please. Joker has a set of custom kernels both uv/oc. I'm using his 1.3 oc kernel for CM7 at the moment but I'm only clocked at 1.2 just testing out. So far its amazing.
Click to expand...
Click to collapse
where can I find those custom value ? and how I set them ?
and while on it, I want to ask since I'm using setCPU to undervolt, what is the normal voltage of 1.2 cpu clock ? I'm noob at this please bear with me, thx
Funny, I have been using SetCPU until Kennypow3rs said something. Although it worked, I have ROM Toolbox Pro. I figured out yesterday, It does all that performance crap and more. Matter fact, I got 15 hours out of my battery (Granted, 7 of those hours I was sleep!)
Lol.
Sent from my HTC EVO View 4G Honeycomb Tablet, runing on the Now Network, (or my AT&T Home Router, lol).
Related
I appreciate the work being done on o/c kernals, but coming from Droid X, there where some great o/c apps that where easy to use, and could change voltages on the fly, making it easy to get the most out of a stable o/c. Will there be such a thing for the TB?
Setcpu.
Coming from droid2 I know what you mean, but we didn't have a custom kernel so were had workarounds. Which is why you had to change once already booted. Not sure if this can be done on tb.
I assume its probably better to havea custom kernel than setting after boot.
Sent from my ADR6400L using Tapatalk
mcmillanje said:
Setcpu.
Coming from droid2 I know what you mean, but we didn't have a custom kernel so were had workarounds. Which is why you had to change once already booted. Not sure if this can be done on tb.
I assume its probably better to havea custom kernel than setting after boot.
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
I have setcpu, but that doesnt allow for overclocking, just clocking down from whatever the max of the kernal is. And AFAIK you cant change the voltage, but maybe Im mistaken about that.
I really like Quickclock advance, you could change voltage by % tailoring it to your exact cpu.
stevessvt said:
I have setcpu, but that doesnt allow for overclocking, just clocking down from whatever the max of the kernal is.
Click to expand...
Click to collapse
Um, sure it does... Assuming that you have an overclocked kernel loaded (the stock kernel is not overclockable), setCPU can control the overclocking of said kernel.
you need an overclocked kernel before you can use set cpu to overclock
Sent from my ADR6400L using XDA App
stevessvt said:
I have setcpu, but that doesnt allow for overclocking, just clocking down from whatever the max of the kernal is. And AFAIK you cant change the voltage, but maybe Im mistaken about that.
I really like Quickclock advance, you could change voltage by % tailoring it to your exact cpu.
Click to expand...
Click to collapse
Set CPU allows you to overclock if your kernel supports it. When you open SetCPU and then select "Autodetect", what it does is check which speeds the kernel supports and lets you pick that from the list.
I can't talk for everyone but a LOT of people (including me) use SetCPU to overclock.
You said you came from the Droid X, the kernel was not able to be changed out because of the locked bootloader, if I'm correct. That's where Quickclock advance came in, it was made to overclock the stock kernel.
On the Thunderbolt you can change the kernel with an overclocked one and use SetCPU.
I realize setcpu can overclock up to the max allowed by the kernal, what Im saying is an app that allows to go beyond that, and manipulate the voltage. I am running at 1.2GHz right now, it runs up to 1.5 fine, except when I get a call it will reboot. If I had a little leeway on voltage, maybe I could get it stable at 1.5.
It would be easier to just o/c in app, then try this kernal, change, dont like, the try another kernal....
No point to use a work around when we can use the real thing.
Samsung Fascinate CDMA
Rooted MIUI 1.9.16
Did a brief search here looking to understand how to operate overclocking kernals, but find it/me relatively limited.
I have installed and ran Glitch v11 and v12, played around with HL to LL, and made adjustments to undervoltage utilizing Pimp My CPU and Voltage Control. I have also ran Tweak (though not really a kernal).
My question is this,
am I overclocking when I reduce voltage on Mhz's above 1,000?
If not, could someone point me to, or explain how to achieve overclocking on our phones, and
which kernel and governor do you prefer for overclocking?
As an ammended note, I've installed Tegrak Overclock, but am still looking for a user guide...
Thank you for your time.
If you're the running the glitch kernel...use voltage control, not tegrak overclock...over clocking is when you turn the CPU speed above its normal speed..anything over 1GHz.
under volting is when you turn down the voltage frequency to achieve better battery life...
Any one clock speed may perform more or less stable with different under volting unfortunately all of our phones will vary in performance so one setting that works for one may not be the best for another so experimentation is really the best option...this applies for schedulers and governors as well.
I personally overclock as high as I can until it freezes or crashes..then I go 1 setting down...I then try undervolting different steps observing the stability of my phone...when I find what I like,I run it for a few days, then if its still nice and stable I will apply on boot.
The different leakage values are affected by the hardware quality of the chips in our phones which also vary..I start with high and see how high I can overclock..note the setting, then try medium..see how high I can overclock and so on...just as a reference..high leakage creates the most heat and is the least efficient, but works for most phones, while low leakage is the most efficient and generates the least heat and will work with not as many phones
Sent from my SCH-I500 using XDA App
efan450 said:
If you're the running the glitch kernel...use voltage control, not tegrak overclock...over clocking is when you turn the CPU speed above its normal speed..anything over 1GHz.
under volting is when you turn down the voltage frequency to achieve better battery life...
Any one clock speed may perform more or less stable with different under volting unfortunately all of our phones will vary in performance so one setting that works for one may not be the best for another so experimentation is really the best option...this applies for schedulers and governors as well.
I personally overclock as high as I can until it freezes or crashes..then I go 1 setting down...I then try undervolting different steps observing the stability of my phone...when I find what I like,I run it for a few days, then if its still nice and stable I will apply on boot.
The different leakage values are affected by the hardware quality of the chips in our phones which also vary..I start with high and see how high I can overclock..note the setting, then try medium..see how high I can overclock and so on...just as a reference..high leakage creates the most heat and is the least efficient, but works for most phones, while low leakage is the most efficient and generates the least heat and will work with not as many phones
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Efan450,
Thanks.
How do you over-clock using Glitch and Voltage Control? I see that Voltage Control goes up to 1,300Mhz, but it's at 0 above 1,000Mhz and can be dropped down to -200mV. Is overclocking just the process of decreasing that voltage on Mhz's above 1,000Mhz's
FJRSport said:
Efan450,
Thanks.
How do you over-clock using Glitch and Voltage Control? I see that Voltage Control goes up to 1,300Mhz, but it's at 0 above 1,000Mhz and can be dropped down to -200mV. Is overclocking just the process of decreasing that voltage on Mhz's above 1,000Mhz's
Click to expand...
Click to collapse
come on man.. Clock speed (mhz) and undervolting are 2 completely different things.. Forget the voltage.. No changing the voltage is NOT overclocking.. You overclock by changing your maximum clock above 1000mhz which is stock for this phone.. Try long pressing 1200mhz and selecting set as max.. Now your overclocked to 1200mhz..
Sent from the fascinate that holds the record benchmark on antutu
No decreasing the voltage is simply undervolting whether it's over 1000 or under. The idea behind undervolting is increasing battery life, but you can't necessarily go and set each level to the maximum undervolt (200) you half to see what works. Increasing the processor speed is overclocking, stock speed is 1000 so anything over that is over clocked. As far as how far as how far you can over clock depends mostly on 2 things, 1. the kernel your using, ( for example if it shows 1300 in the list that means thats all that specific kernel supports) 2. It varys greatly between phones. For example with glitch you can overclock to 1700 but very few phones can run that high for longer than a few minutes!
Hope that helps.
Sent from my SCH-I500 using xda premium
Yes.. And the fact you say your running glitch and your max oc is only 1300 my guess is you broke your kernel with tegrak overclocks module.. Delete tegrak and stop downloading overclock apps. or any other root app unless you know fully the consequences first.. If after deleting tegrak, and rebooting, if your voltage control don't show a maximum clock of 1700 mhz, then you will need to reflash your glitch kernel
Sent from the fascinate that holds the record benchmark on antutu
Neh4pres,
Yeah, I kind of feel like a heel. For some reason, I had a brain fart when looking in the 'General' section of Voltage Control. I see now how to overclock.
Regarding ost #6:
When I flashed MIUI 1.9.16, I did not install any kernel; so it was kind of a half truth in that while running 1.9.9 I did have Glitch installd. Nevertheless, I still have Voltage Control installed.
mkropf,
I see that now, and thought as such earlier, but needed some clarification.
Having so many issues with Glitch and 1.9.9, I'm hesitant to install Glitch, but interested to see if it runs better on the newer MIUI...
Thank you two for answering my newbie questions.
FJRSport said:
Neh4pres,
Yeah, I kind of feel like a heel. For some reason, I had a brain fart when looking in the 'General' section of Voltage Control. I see now how to overclock.
Regarding ost #6:
When I flashed MIUI 1.9.16, I did not install any kernel; so it was kind of a half truth in that while running 1.9.9 I did have Glitch installd. Nevertheless, I still have Voltage Control installed.
mkropf,
I see that now, and thought as such earlier, but needed some clarification.
Having so many issues with Glitch and 1.9.9, I'm hesitant to install Glitch, but interested to see if it runs better on the newer MIUI...
Thank you two for answering my newbie questions.
Click to expand...
Click to collapse
There are no issues with glitch.. It is what I run.. Very smooth.. Just have to give your phone time to adjust and build cache
Sent from the fascinate that holds the record benchmark on antutu
Landscape
Re-installed Glitch v12 ML last night and have it overclocked @ 1,200 with no under-voltage...yet. Want to see any adverse effects.
I started at 1,300 and it locked up then rebooted within 5 minutes.
A concern I have is that now my phone will not Auto Rotate to Landscape even though I have Auto-Rotate 'on' in Settings.
I've scoured Sixstrings Glitch thread to no avail. Though it's not needed anymore, I also flashed the cleaning script just to see if it would make a difference.
Is there a work around or fix for this?
Make sure you're on the latest 9/15 version of the kernel. Anything before that will kill all of your phone's sensors.
http://forum.xda-developers.com/showthread.php?t=1252871
sageDieu said:
Make sure you're on the latest 9/15 version of the kernel. Anything before that will kill all of your phone's sensors.
http://forum.xda-developers.com/showthread.php?t=1252871
Click to expand...
Click to collapse
That was it. I had re-installed the older Glitch v12 that was already on my PC. Deleted them and downloaded the newer Glitch kernels to experiment with.
Thanks!
FJRSport said:
Re-installed Glitch v12 ML last night and have it overclocked @ 1,200 with no under-voltage...yet. Want to see any adverse effects.
I started at 1,300 and it locked up then rebooted within 5 minutes.
A concern I have is that now my phone will not Auto Rotate to Landscape even though I have Auto-Rotate 'on' in Settings.
I've scoured Sixstrings Glitch thread to no avail. Though it's not needed anymore, I also flashed the cleaning script just to see if it would make a difference.
Is there a work around or fix for this?
Click to expand...
Click to collapse
under volting helps stability.. I use -50 for everything above 1ghz.. Your phone may vary
Sent from the fascinate that holds the record benchmark on antutu
OC & UV settings
neh4pres said:
under volting helps stability.. I use -50 for everything above 1ghz.. Your phone may vary
Sent from the fascinate that holds the record benchmark on antutu
Click to expand...
Click to collapse
Yeah, locking and rebooting was while using the older version of Glitch v12. With the 9/15 dated Glitch I'm at 1300 now with the following settings:
Deadline / ondemand
200 - 1300
1300 -25
1200 -25
1000 -50
800 -50
400 -75
200 -75
1.2GHz is the best I say if you want good battery with a higher frequency. 1.4GHz is the best for anyone who uses their phone alot. Samsung did add 1.2GHz overclock in their source.
Sent from my SCH-I500 using XDA App
Back to running MIUI without Glitch.
Things that make you go, Hmmm?
For some reason, every time I accessed the keyboard for Google+, it hung, then froze, and 3 of the four times rebooted. The fourth time I needed to remove the battery to reboot. So I re-flashed MIUI 1.9.16 (effectively removing Glitch) and have 0 problems.
Bummer, I like Glitch too.
I'm in the same boat, however they redone the latest glitch merge and posted it last night so I'm thinking we'll be back in good times
Sent from the most custom, custom rom Miui 1.9.16 and currently the best kernel Jt
mkropf said:
I'm in the same boat, however they redone the latest glitch merge and posted it last night so I'm thinking we'll be back in good times
Sent from the most custom, custom rom Miui 1.9.16 and currently the best kernel Jt
Click to expand...
Click to collapse
are you using JT's 9/12 kernel?
if so...did you overclock it?
i'm on jt's 9/12 with miui 1.9.16 and wondering if I can / should overclock and undervolt it. I'm just trying to maximize battery life at this point.
Try the new glitch posted last night, it is fantastic.
Sent from my MIUI SCH-i500
sageDieu said:
Try the new glitch posted last night, it is fantastic.
Sent from my MIUI SCH-i500
Click to expand...
Click to collapse
what voltages are you running?
also for anyone..
is there any way to directly compare two kernels? like a test or something?
I can't decide between JT's 9/12 and the new glitch..
worshipNtribute said:
what voltages are you running?
also for anyone..
is there any way to directly compare two kernels? like a test or something?
I can't decide between JT's 9/12 and the new glitch..
Click to expand...
Click to collapse
You wouldn't want to use my voltages, I put everything way lower than anybody else does or recommends and am just lucky that it is stable for me but it causes the sleep of death for anyone else.
For comparison, just run JT's kernel for a bit and then flash glitch and try it... once you play with OC/UV and voodoo color you won't be able to go back. (you'll be able to but you'd have to be insane.)
First I am aware that overclocking is not "safe" and all that kind of stuff
However for some reason I am unable to OC my SGS2 and run the phone on a steady way.
I have tried several ROMs (stock and custom) with different kernels and OCing apps with no avail.
I am not even able to run at 1.4Ghz or 1.6Ghz without having my phone reboot or hard lock on me.
Is there a particular or recommended setting (most successful combination) that anyone out there can suggest me trying?
Sometimes it will hang under heavy gaming but sometimes even browsing app and regular stuff will cause the phone to reboot or lock. If I work with no OCing at all then everything is fine and dandy.
Thanks, you can see my current configuration @ my signature.
Sounds like a very temperamental cpu. Currently I have the same setup you do and have never had issue with 1400mhz or 1600mhz. Though I usually leave mine at 1200mhz. What app are you running when it hangs?
And just as important, do you have alot running in the background? The modified touchwiz launcher unnamed comes with can be enabled to show a red dot next to the apps that have been opened and are in the background.
If you could list the apps with the red dots.
Sent from my páhhōniē
gr8hairy1 said:
The modified touchwiz launcher unnamed comes with can be enabled to show a red dot next to the apps that have been opened and are in the background.
Click to expand...
Click to collapse
It does? That sounds more like one of the themes that includes TW4.5.
Not all CPUs can overclock - there's a reason it was sold as a 1.2 GHz chip.
Well as I've mentioned before, it could even hand when browsing through my apps menu, browsing the gallery, playing a game (non in particular) and the funny part is that the phone is not even hot to touch.
What I know for sure if that if no OC = no hangs, no reboots.
I do have the App monitor widget that comes with the stock ROM and currently using it on UnNamed 1.3.1 and I only have Widget Locker App. However I have try closing it and still will happen.
Not sure if maybe this CPU is somehow having an issue that makes it unstable as soon as I OC it.
Entropy512 said:
Not all CPUs can overclock - there's a reason it was sold as a 1.2 GHz chip.
Click to expand...
Click to collapse
Now that is new to me, I thought that all of them were OCable. Is there anyway to identify which can be or not OCed?
nope.. just by testing. it does have to do a little bit with the kernel and rom. the roms didnt originally have stable OC. i would assume that all of them do now. one thing you might try is giving them a little more voltage (just a little) at the higher clocks, but be careful. if you increase the voltage that means that you will sink more enery through the cpu and it will get hot quick. make sure you watch the temp.
i find that setcpu is less stable than the built in cm7 oc menu but cm7 doesnt have a voltage menu.
but on the same token... why OC? i can and i did but i dont need to... everything is like butter and i didnt see that huge a gain by OCing it anyways
tmckenn2 said:
nope.. just by testing. it does have to do a little bit with the kernel and rom. the roms didnt originally have stable OC. i would assume that all of them do now. one thing you might try is giving them a little more voltage (just a little) at the higher clocks, but be careful. if you increase the voltage that means that you will sink more enery through the cpu and it will get hot quick. make sure you watch the temp.
i find that setcpu is less stable than the built in cm7 oc menu but cm7 doesnt have a voltage menu.
but on the same token... why OC? i can and i did but i dont need to... everything is like butter and i didnt see that huge a gain by OCing it anyways
Click to expand...
Click to collapse
I know, this Exynos processor is the best out there right now, forget about Qualcomm's Snapdragon on the Skyrocket. I am just trying to OC for the fun of it
Guti1977 said:
I know, this Exynos processor is the best out there right now, forget about Qualcomm's Snapdragon on the Skyrocket. I am just trying to OC for the fun of it
Click to expand...
Click to collapse
Although it makes me wonder if the CPU could be having an issue, since it hard locks when attempting to.
Guti1977 said:
Although it makes me wonder if the CPU could be having an issue, since it hard locks when attempting to.
Click to expand...
Click to collapse
have you ever overclocked PC CPUs? if you have spent much time doing that, then you would know that not every chip, even within the same model/family, will clock the same. take 2 CPUs, from the same batch, same model, with identical hardware tied to them. you will probably find that one clocks higher stable speeds than the other.
its very likely the proc in your phone just cannot handle the overclocks that the next person's could.
Like pirate said, no two pieces of hardware are identical. Sort of shows how much variance there can be in a manufacturing process. Id guess theres a few chips that come off the same line that arent stable at 1.2 ghz, but they dont make it to the devices, whereas one that can handle a higher clock will. (No sense tossing one that exceeds minimum requirements, thatd just be throwing good hardware away)
You could try nudgin the voltage up and seeing how it behaves, just use caution.
Sent from my SAMSUNG-SGH-I777 using XDA App
garyd9 said:
It does? That sounds more like one of the themes that includes TW4.5.
Click to expand...
Click to collapse
My bad. You are correct.
Sent from my páhhōniē
To get mine to overclock to 1.4 and 1.6Ghz I had to actually INCREASE the voltage settings via Voltage control app. So my settings are: 1.6Ghz= 1475mV and 1.4Ghz=1325mV
Try those out and see if is better for you. I tried undervolting the higher voltages and would either lockup or reboot instantly until I tried adding voltages. So you may need to play with your settings to get it to work for you.
Sent From My KickAss ATT SGS2 SPORTING CM7
twiggums said:
Like pirate said, no two pieces of hardware are identical. Sort of shows how much variance there can be in a manufacturing process. Id guess theres a few chips that come off the same line that arent stable at 1.2 ghz, but they dont make it to the devices, whereas one that can handle a higher clock will. (No sense tossing one that exceeds minimum requirements, thatd just be throwing good hardware away)
You could try nudgin the voltage up and seeing how it behaves, just use caution.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Yup, or if they want to sell a "premium" device with a higher clock rate, they will take the parts that test well at 1.4 and sell them as such - meaning parts rated 1.2 will be LESS likely to be overclockable if a device comes out with CPUs rated at 1.4 - like the Galaxy Note did.
Before, anything that could meet the requirements of stable at 1.2 was sold to any Galaxy S II - but now, the premium parts are going into the Note.
RockRatt said:
To get mine to overclock to 1.4 and 1.6Ghz I had to actually INCREASE the voltage settings via Voltage control app. So my settings are: 1.6Ghz= 1475mV and 1.4Ghz=1325mV
Try those out and see if is better for you. I tried undervolting the higher voltages and would either lockup or reboot instantly until I tried adding voltages. So you may need to play with your settings to get it to work for you.
Sent From My KickAss ATT SGS2 SPORTING CM7
Click to expand...
Click to collapse
I am having the same issue as the original poster on my new GS2. I will have to try the settings you mention but would it be possible to do this and also apply /UV to the remaining lower (1000ghz to 200ghz) processor speeds and maintain stability?
Hey guys,
I have just installed OmegaRom by Team Cooper and what a Rom it is!!! Amazing is an understatement.
Okay so with there new Rom v2, it has an OC kernal built in and it does work...BUT I need to know how to OC the thing safely and squeezing as much performance as possible!
I have it at 825 and min 806 mhz, scaler is performance.
What settings would you pro's recommened?
Thanks!
Edit 1- I am using SetCPU to OC.
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
an0nym0us_ said:
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
Click to expand...
Click to collapse
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
davalav said:
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
Click to expand...
Click to collapse
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
CPU Tuner
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
sreesh87 said:
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
Click to expand...
Click to collapse
I have OCed it to 902 mhz..
Sent from my GT-S5830 using XDA App
Thanks for the comments guys... Gives me a rough estimate on its limits.
So far I have been running 844mhz performance for a while, since I created this thread and the battery has remained at 82%!
I have benched using AnTuTu twice and have excellent read and write speeds, compared to other benchies I have seen, OmegaRom is the best Rom I have ever used!
Cheers,
i tried cpufrills and its the best for me
I don't Think U mustuse over clocking,even my setting was min245 max 902,the effect just draining more battery,and if using to much can damaging ur prosessor
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Rushyang said:
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Click to expand...
Click to collapse
Don't worry! Like I said, I have experience O/C'ing processors etc and I know how bad the effects can be! I am not going for a massive overclock at all. Just a tiny bump in the speed. At the moment, I am running 825mhz and already the speed has improved dramatically. I may go a little further but 902mhz is a bit mental for my liking.
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
SetCPU is free for XDA members and it's the best one ever...period
http://forum.xda-developers.com/showthread.php?t=505419
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
setCPU is free to if you download it from the forum
This might be a dumb question but...if we are rooted can we use setcpu? What I mean is I thought you had to have a custom kernel in order to run it but I think I saw a screenshot earlier (can't find it now of course) of somebody running setcpu with stock rooted rom/kernel.
If we can run it what would be the optimal settings?
Thanks!
My understanding is that we can use SetCPU when rooted, even with a stock kernel. And then some custom kernels have their own control built-in, thereby making SetCPU redundant.
Sent from my EVO using XDA
I rooted and am using setcpu. It's working fine after autodetecting the cpu speeds.
bernechad said:
I rooted and am using setcpu. It's working fine after autodetecting the cpu speeds.
Click to expand...
Click to collapse
I can get it to work and autodect the speeds. I'm not sure what to set the max and min at for say ondemand governor if I don't want to overclock but just maybe save a little battery without losing performance.
I used setcpu on my OG EVO for a long time and felt like it did a great job. Just not sure of the optimal settings with this device.
Sent from my EVO using Tapatalk 2
tgrgrd00 said:
I can get it to work and autodect the speeds. I'm not sure what to set the max and min at for say ondemand governor if I don't want to overclock but just maybe save a little battery without losing performance.
I used setcpu on my OG EVO for a long time and felt like it did a great job. Just not sure of the optimal settings with this device.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
For me, setcpu won't allow me to overclock yet. The max CPU speed is 1512mhz and that's all setcpu will allow. The min allowed is 300 something.
Sent from my EVO using XDA
Ive had my evolte since launch coming from an evo3d and when i got my new evo i didnt install setcpu because i wasnt rooted. Now that Im rooted i want to know if anyone is running setcpu and is it saving any battery at all. I get pretty good battery life runnning mean rom on the evolte but any battery saving would help.
tybo31316 said:
Ive had my evolte since launch coming from an evo3d and when i got my new evo i didnt install setcpu because i wasnt rooted. Now that Im rooted i want to know if anyone is running setcpu and is it saving any battery at all. I get pretty good battery life runnning mean rom on the evolte but any battery saving would help.
Click to expand...
Click to collapse
U've been using Setcpu, and although there is no HWA, I at least can set it to turn down the proc. when my screen is off. I think it's doing it's job, although I haven't been taxing it real bad today, I know my og Evo would have been at like 30 percent when my LTE is sitting pretty at 71% in the same time frame.
almost every rom has built in tweaks to save battery.. setcpu is good for overclocking.. and we dont have any custom kernels yet so setcpu is no good really.. must people use system tuner because u can see both cores... i have had the og evo.. the evo 3d and now the lte.. last time i used setcpu was on the og evo..