Hi,
May I know where to get the XWKF1 radio modem, I just wanna flash the radio modem. Thanks.
Related
hello,
i live in israel and with cellcom provider.
right now on cognition 1.31, i am looking for a my cellular provider Modem which comes in the CSC(?) on 2.3.3 HEBREW ROM.
is it possible to use 2.3.4 firmware with a CSC that came from 2.3.3 ROM?
switching the modem is possible when you switch CSC or is the process different?
if so, how can i extract the provider modem in orfer to flash it onto my ROM..
if the question is why- its because i have issues with GPS and such and also i think it would improve my battery time.
thanks
Hm, not really sure what exactely you're trying to do.
Modem and CSC are two totally different things.
The Modem software is the firmware of the actual radio/modem device that handles all the traffic to and from the cell network, WiFi and bluetooth.
The CSC is a set of settings, parameters and options.
So, you want to modify/edit settings, like APN or the such, or you really want to flash a new modem firmware/software?
The modem software is part of the firmware ROM .tar, look for modem.bin, that's the one.
Yes, can be flashed independently from the current ROM installed.
Hey im new 1 month into rooting. Just done some research and was abit confuse.
Im on VillianRom 2.42
Kennel: Ninphet 2.1.1
Baseband Version XXKG6
Im in Australia Melbourne, Vodafone (carrier)
My original Baseband was KF4 and read that connection with internet/signal is KF4
Am i meant to flash bak original Kennel bak into my pone.
What does mean? my theory is to go xda n download the original Carrier CF Root and flash it on my phone
Noob question but quite confused..
Thx
chan9096 said:
Hey im new 1 month into rooting. Just done some research and was abit confuse.
Im on VillianRom 2.42
Kennel: Ninphet 2.1.1
Baseband Version XXKG6
Im in Australia Melbourne, Vodafone (carrier)
My original Baseband was KF4 and read that connection with internet/signal is KF4
Am i meant to flash bak original Kennel bak into my pone.
Why Kernel has nothing to do with baseband/modem .
You have a Villain rom and your dog lives in Ninphet2.2.1 .
Your modem is KG6 .
Unless you are having reception problems leave it alone .
Or if you need go to dev forum modems posts and flash whatever modem you want .
jje
Click to expand...
Click to collapse
chan9096 said:
Hey im new 1 month into rooting. Just done some research and was abit confuse.
Im on VillianRom 2.42
Kennel: Ninphet 2.1.1
Baseband Version XXKG6
Im in Australia Melbourne, Vodafone (carrier)
My original Baseband was KF4 and read that connection with internet/signal is KF4
Am i meant to flash bak original Kennel bak into my pone.
What does mean? my theory is to go xda n download the original Carrier CF Root and flash it on my phone
Noob question but quite confused..
Thx
Click to expand...
Click to collapse
Ill say leave it, in case it does cause incompatibility issues with the ROM. Generally speaking regardless of the baseband, since do keep in mind, these phones are supposedly globally GSM compatible (except for select few CDMAers). I am using different baseband to Vodafone NZ but no reception issues. I am not 100% if VillianROM still use CSC codes, but essentially on the stock ROMs, CSC provides carrier specific settings. Check your CSC with *#12580*369#.
Mine shows up as
PDA: I9100XXKH3
Phone: I9100XXKH3
CSC: I9100VNZKG1 (the latest from Vodafone NZ) although its not KH3 but KG1.
I have upgraded to XXKG6 on it, but I don't like how modem of XXKG6 works, and I want to downgrade it to XXKG5 version, and it seems to be a little bit buggy and problematic (I've read on google, and I tested myself already, the signal is not as strong as before and the battery drains a lot faster when Wi-Fi or 3G is enabled compared to XXKG2). Well, I want to remain on the same XXKG6 firmware, but with XXKG5 modem, it is possible? or I may brick my phone?
How can you flash to modems at a same phone? No way it's possible. You either have to choose KG5 or KG6.
Regards.
ithehappy said:
How can you flash to modems at a same phone? No way it's possible. You either have to choose KG5 or KG6.
Regards.
Click to expand...
Click to collapse
Where I did tell that I want to flash two modems? i want to flash modem from XXKG5 with XXKG6 firmware
Who can share for me link modem DXKI1 up by odin.Thank for everyone
http://www.google.com.sg/url?sa=t&r...fYLZX97xEA1BL62qA&sig2=mRYeduJyrRuX1aVAzVd-yw
google!!!
do you have this modem that up by odin? my phone is not root, so i don't up by CWM.
since moving from 2.3.3 to to 2.3.5 ive had stability issues and signal drop outs.
ive kept the kf2 modem during the change over and suspect that i may need to upgrade the modem to the latest version compatible for telstra and i will also move to 2.3.6 (stock) soon.
what is the latest modem version that works nicely with telstra's 3g network in AU.
Both Voda and Telstra sell the I9100T which uses a different modem to the international model. Last I heard, the latest modem was released by Voda - I9100TDUKJ1.
But you might want to check / ask on the Aussie forum below.
http://forum.xda-developers.com/showthread.php?t=1166701
There is also a modem thread which has all the worldwide T model modems.
Edit: modem thread. Check post 3
http://forum.xda-developers.com/showthread.php?t=1131950
I find i get best speeds and stability with DXKL1
Here is the link
http://www.multiupload.com/IQB1391ZVO
Is the file above able to be flashed via odin or is it for a rooted phone with clockworkmod?
At this stage my phone isnt rooted.
CW. If you want to flash it with Odin, extract the modem.bin file & put that in the "phone" section of Odin & away you go.
anark1 said:
Is the file above able to be flashed via odin or is it for a rooted phone with clockworkmod?
At this stage my phone isnt rooted.
Click to expand...
Click to collapse
so .bin will work fine in the phone section of odin.
shouldnt it be in the tar.md5 format?