Related
Can someone tell me what is the multitouch capability of the G Tablet? I'm thinking of buying it as it is the cheapest Tegra 2 tablet, but I'm not so sure about the multitouch. Is it 2-point multitouch or 5 point? If someone with the tablet would be so kind to just download like Multitouch Test from the Market and see how many fingers the tablet supports.
2-point.....
jurassicjockey said:
2-point.....
Click to expand...
Click to collapse
Is this a hardware or software limitation?
Thanks!
Just so your aware. On my gtab multitouch is only reliable when the two points are not on the same x or y axis. When zooming in for example it is necessary to pinch diagonally or else nothing happens. Other have claimed this is not an issue on their gtabs, but this has been an issue for across several roms.
ensign.fodder said:
Is this a hardware or software limitation?
Click to expand...
Click to collapse
Difficult to say. The kernel only gets the data for 2 (simultaneous) touchpoints from the ATmega168 microcontroller that the actual touchscreen sensors (2 Pixcir Tango 32C sensor chips) are connected to.
Can the ATmega168 uC be reprogrammed to send more than 2 simultaneous touches to the kernel? Can't say.
Do the Pixcir Tango 32C sensor chips register more than 2 fingers at the same time. Yes, very probably.
Whatever the case, you'll need a ATmega168 programmer and all the chip-specific datasheets to make it happen.
Hello i bought a Flytouch 5, I'm wondering what people know about this tablet.
And also i like to learn here if it's possible to change the Android version to one that are around here.
I'm not really happy with the pre installation that came from the manufacturer. It works but i know it can be better.
I would be really happy with any info what is out there about this tablet.
Info from tablet.
Model Number: YOSPAD
Android Version: V2.3 2011-07-17(001112)
Kernel Version: 2.6.32.9 [email protected] #216
Build Version:FR858
Update
I noticed to that when i post with the tablet the footnote on the bottom of the message says "Sent from my mercury using XDA App"
I hope this extra info will help.
Operating System Android 2.3
Model Fly Touch 5
Product Type Tablet
Keyboard Touch screen
Battery Type 6400MAH Li-ion Battery
Battery / Run Time (up to) about 4~6 hours
Power Device Type AC Adapter
Voltage required 100/240V
Miscellaneous / Color Silver
Dimensions / W x D x H 170.mm(W) x 270.0mm(D) x 16.mm(H)
Net Weight 0.68kg
Performance
Processor Type ARM 11
Processor Clock Speed 1GMHz
Processor Model Infotmic X220
Cache Memory / Type I-Cache
Cache Memory / Installed Size 2M
RAM / Technology DDR 2
RAM Installed Size 512MB
Display Diagonal Size 10.2 inch
Max Resolution 1024 X 600
Display Technology Resistive touch screen
Graphics Type Integrated Graphics
Graphics Model Support 1080P
Storage and Expansion
Hard Drive Type NAND Fast Flash
Hard Drive Capacity 4GB
Hard Drive Spindle Speed NAND Fast Flash
PCMCIA Expansion Support 16GB MAX
Communications
Net Connection
Fast Ethernet
Wireless Connection
Wifi
Wireless Protocol 802.11 b/g
Support Format
Video RM/RMVB,DAT,MPG,VOB,MP4,
AVI/MK,TS,FLV,WMV,MOV
Audio MP3,AAC,AAC+,EAAC+,
WMA,WMA PRO,RA
Picture JPG, GIF, BMP ,PNG
Ebook TXT(Support TTS reading function)
Input/Output Connectors
Ports
2 x USB
1 x Output HDMI
1 x SD slot
1 x DC jack
1 x Ethernet Jack
Digital Zorro said:
Hello i bought a Flytouch 5, I'm wondering what people know about this tablet.
And also i like to learn here if it's possible to change the Android version to one that are around here.
I'm not really happy with the pre installation that came from the manufacturer. It works but i know it can be better.
I would be really happy with any info what is out there about this tablet.
Info from tablet.
Model Number: YOSPAD
Android Version: V2.3 2011-07-17(001112)
Kernel Version: 2.6.32.9 [email protected] #216
Build Version:FR858
Click to expand...
Click to collapse
Hi, I have the same one since a week ago. Unfortunatelly I updated it with another Android OS and now I don't have WIFI. May I ask you if you are still on the original firmware to send me the file wpa_supplicant.config? Or if you have the original ROM it will the best way if you can send me the link to download it. Thanks.
teddy_irish said:
Hi, I have the same one since a week ago. Unfortunatelly I updated it with another Android OS and now I don't have WIFI. May I ask you if you are still on the original firmware to send me the file wpa_supplicant.config? Or if you have the original ROM it will the best way if you can send me the link to download it. Thanks.
Click to expand...
Click to collapse
Yes i still have the original firmware installed.
I really like to help you solve your problem. How i do get the "wpa_supplicant.config" File from the tablet?
Digital Zorro said:
Yes i still have the original firmware installed.
I really like to help you solve your problem. How i do get the "wpa_supplicant.config" File from the tablet?
Click to expand...
Click to collapse
Thank you for your answer! Is your device rooted? Because only if it's rooted you can go to the folder where the file is. Or maybe you have the ROM? That will be the best way if you have the ROM to send it to me. Or to ask your reseller to send it to you? By the way where did you buy it from? That might help me to obtain the original firmware.
Thanks
teddy_irish said:
Thank you for your answer! Is your device rooted? Because only if it's rooted you can go to the folder where the file is. Or maybe you have the ROM? That will be the best way if you have the ROM to send it to me. Or to ask your reseller to send it to you? By the way where did you buy it from? That might help me to obtain the original firmware.
Thanks
Click to expand...
Click to collapse
How is the folder named? Let me look in to that first, i don't think the site allows direct company names that sell this product.
I'm surprised about the low info here on this tablet.
Maybe new info i found will help, it's also known as superpad.
And I'm sure it's no fake. Google it. I will not advertise here.
Still need some good info and answers.
Send from my Flytouch 5. (Mercury)
I bought one of these chunks of crap, it ran for 24 hrs now it won't boot it had newer yospad firmware but I can't remember the exact build cause it won't boot now. What I need to know is how to do a hardware reset, not the little reset button it just restarts it or another yospad rom.
Any help would be greatly appreciated thanks
Sent from my V9 using Tapatalk
Found out how to hard reset this chunk of gold and its good now
Peace
Sent from my GT-I9000 using Tapatalk
richarddwyer10 said:
I bought one of these chunks of crap, it ran for 24 hrs now it won't boot it had newer yospad firmware but I can't remember the exact build cause it won't boot now. What I need to know is how to do a hardware reset, not the little reset button it just restarts it or another yospad rom.
Any help would be greatly appreciated thanks
Sent from my V9 using Tapatalk
Click to expand...
Click to collapse
I see you already found it...This for the people who still don't know it. http://www.youtube.com/watch?v=YyWTEr2NeDo
I think Gingerbreak might of bricked this but now this is running I'm reluctant to try again. Have you rooted you're yospad yet?
I've been sent the latest firmware from the supplier as well as the flash player file if you want it
Sent from my V9 using Tapatalk
Upgrade file for YosPad
How were you able to upgrade the firmware and flash file on your YosPad ?
mikeema said:
How were you able to upgrade the firmware and flash file on your YosPad ?
Click to expand...
Click to collapse
Yes, i'm interested in that too.
Yes format SD card put Fw update on SD and turn power on and it will flash itself. Btw use z4root to root this because it is fake back ported 2.3 in other words its 2.2
Sent from my V9 using Tapatalk
Who the hell gives names to this devices .. ? Flytouch 5 ? zomg!
this is the ONLY company that has the Infotmic SoC available for implementing into tablets:
http://www.shuoying.com/global/index.asp
http://www.shuoying.com/global/Product.asp?/3.html (tablet page)
I Know that, cause I personally visited the head of Infotmic SoC design (Shenzhen) and ShuoYing CEO, also in Shenzhen (Infotmic HQ is from Shanghai)
If there is any other tablet with "Flytouch" design, then they are tempered from the original tablet made by Shuoying, or they are so wild that it is really a mystery of it's origin.
My guess is that those are regular FT2 (since all have the same CPU) tweaked by some wild chinese people, Kernel and OS, and RAM/ROM
not to all - dont buy tablets from companies that dont show up in 1-2 hours search. You'll end up with tablet that someone assembled by hand and a screwdriver, and most probably extremely bad OS.
flashing rom on yospad
Use only Z4 to root the yospad. Can someone leave link for fw flash for yospad
Igoritza said:
Who the hell gives names to this devices .. ? Flytouch 5 ? zomg!
this is the ONLY company that has the Infotmic SoC available for implementing into tablets:
http://www.shuoying.com/global/index.asp
http://www.shuoying.com/global/Product.asp?/3.html (tablet page)
I Know that, cause I personally visited the head of Infotmic SoC design (Shenzhen) and ShuoYing CEO, also in Shenzhen (Infotmic HQ is from Shanghai)
If there is any other tablet with "Flytouch" design, then they are tempered from the original tablet made by Shuoying, or they are so wild that it is really a mystery of it's origin.
My guess is that those are regular FT2 (since all have the same CPU) tweaked by some wild chinese people, Kernel and OS, and RAM/ROM
not to all - dont buy tablets from companies that dont show up in 1-2 hours search. You'll end up with tablet that someone assembled by hand and a screwdriver, and most probably extremely bad OS.
Click to expand...
Click to collapse
I think your completely right there.
I use it for a remote control know.
Thanks for the input btw.
Digital Zoro - im sorry for your failed tablet device.
On the other hand - I find the FT2 design to be the best tablet design ever. it obviously lacks the fine finish, and better materials, but - 10 inch wide tablet, with every god damn port there is - pure win.
I saw the "actual" FT3 in Infotmic Shenzhen, and it looks awesome - capacitive screen, ARM Cortex A8 based infotmic SoC (about time dudes, you are sooo late) .. dont know why isnt out yet, cause all those named "FT3" dont have same specs as the one I saw.
Igoritza said:
Digital Zoro - im sorry for your failed tablet device.
On the other hand - I find the FT2 design to be the best tablet design ever. it obviously lacks the fine finish, and better materials, but - 10 inch wide tablet, with every god damn port there is - pure win.
I saw the "actual" FT3 in Infotmic Shenzhen, and it looks awesome - capacitive screen, ARM Cortex A8 based infotmic SoC (about time dudes, you are sooo late) .. dont know why isnt out yet, cause all those named "FT3" dont have same specs as the one I saw.
Click to expand...
Click to collapse
My Flytouch 5
The design is not really bad and i like that it has the rj-45 port.
The screen I find bad. No multitouch and slow reaction when touched.
Its thick and heavy to hold.
Flytouch 5 should have GPS build in, but it doesn't.
The Flytouch 2 3 4 5 are all the same design. On one moment it lost the second mini sd slot.
Is this only with the fake ones?
No, they are all faulty. the forementioned Shuoying company makes crapy tablets
I took for bussines 30 units the first time around, and I still have 6 broken units. others had flaws, mostly of how they are assembled - everything is sticking out, and such. USB/SD slots die more often than you could imagine.
buttons are the biggest problem - they are not glued in & soldered - they are JUST soldered. so the only thing that holds them into place is Tin (Sn) and we all know how that is firm and solid
oh, there is also a screen problem - there are 3 types of ZIF wire-to-board connector types for the screen, so if you ever need a screen replacement - dont even think about it.
the best assembled chinese tablet is from a company Utopia, in my expirience. you can find them by the name "imx515" A8 or A10 tablet. it turns out that solutions for assemble is better than most of the branded companies.
Just bought this tablet this morning. Found out that the programs have been signed with the wrong id. Can't update programs without deleting them, which means I need to root the device. I'd like to know if any of the rooting methods are better than any other if they work. I'd also like jellybean. Would I have to try and make a custom rom? Or could I try one from another tablet?
I'd be grateful for some help, but I know everyone is busy with more interesting stuff, so I'll wait patiently.
In the mean time I'll try some of the methods out there and hope I don't brick the device.
jack3643 said:
Just bought this tablet this morning. Found out that the programs have been signed with the wrong id. Can't update programs without deleting them, which means I need to root the device. I'd like to know if any of the rooting methods are better than any other if they work. I'd also like jellybean. Would I have to try and make a custom rom? Or could I try one from another tablet?
I'd be grateful for some help, but I know everyone is busy with more interesting stuff, so I'll wait patiently.
In the mean time I'll try some of the methods out there and hope I don't brick the device.
Click to expand...
Click to collapse
+1 on the questions.
I think for root, some tools using generic exploits for 4.0.3 might work. but for custom roms we might be out of luck.
tabletrepublic.com/forum/iview-760tpc-ployer-momo9/iview-760tpc-k-ployer-momo9-firmware-rom-releases-1610.html
Go here there is lots of information about all winner A10 tablets..
we all should be polite enough to press thanks for anyone who helped US.
AJ88 said:
tabletrepublic.com/forum/iview-760tpc-ployer-momo9/iview-760tpc-k-ployer-momo9-firmware-rom-releases-1610.html
Go here there is lots of information about all winner A10 tablets..
we all should be polite enough to press thanks for anyone who helped US.
Click to expand...
Click to collapse
Thanks. does that mean we can use the ICS 4.04 firmware from http://en.ployer.cn/support.php?id=3 along with the install guide from it? (and that the firmware between the bauhn and momo units is the same, or compatible, despite physical appearance differences (like physical keys, and pooosibly another CPU (the bauhn tablets are all Amlogic Cortex A9...if the A10 in the allwinner is the CPU type ref))?
also, any idea if the page you linked to has cooked roms with root included?
OK.
Rooted with this...
http://forum.xda-developers.com/showthread.php?t=1601038
Seems to work. Have deleted youtube.apk from the system directory. Rebooted. Installed youtube 4.06? (I think) Now youtube just won't run. Did a full factory reset and cache wipe from recovery (wasn't even sure recovery existed on this thing, but there you go). Installed youtube again. Still doesn't work even after deleting program cache and deleting settings from app menu.
Will see how I go with the link from AJ88. See where it leads.
More later.
You may use 4.0.3 firmware in your tablet and may use clockwork recovery 5 in your tablet...
Many people use this firmware in micromax funbook..
Just give it a try many things in this player momo tab and your device is same..so do at your risk..
First try to run recovery if you can flash it successfully first backup your current firmware so that in future if things goes wrong you can get your original device back.
Best luck
we all should be polite enough to press thanks for anyone who helped US.
---------- Post added at 05:41 PM ---------- Previous post was at 05:34 PM ----------
If bauhn tablet is running on cortex A9 processor than this will not work for you...
Because this Chinese custom Roms and all stuff there on tablet republic is for A10 all winner tablets...
Inspite of that just read that forum throughout may be you can find any answer..
Or you can PM That forum admin for further help
we all should be polite enough to press thanks for anyone who helped US.
So I have to find firmware compatible with my processor and other hardware inside this thing? Do I have that right?
Time to start looking for something with the same hardware.
Yes that's because if your device ram is 512 and you flash a firmware of device which has 1gb ram than how it operate?
Same for processor
we all should be polite enough to press thanks for anyone who helped US.
Thanks AJ88. Do you know any common tablets with these specs?
Specification
CPU - Amlogic Cortex A9 8726-MX Dual Core Processor
Processor - 1.5GHz
Operating system - Google Android 4.0
Display - IPS 9.7" 4:3, LCD panel
Resolution - 1024 x 768 resolution
Touch Screen - Capacitive Multi touch
Battery life - Li-Polymer, (up to 6 hours)
Internal Memory - 16 GB (expandable with micro SD memory card)
Memory - DDR3 1GB
WLAN / Wi-Fi - IEEE 802.11 b/g/n
Bluetooth - 2.1
UMTS / 3G - No
G Sensor - Screen Rotation
Cameras - Web Cam 0.3, 2.0 Megapixels rear camera
Microphone - Internal Microphone
USB 2.0 Input
Headphone Jack - 3.5mm Stereo Output
HDMI Output
Google about it..
we all should be polite enough to press thanks for anyone who helped US.
AJ88 said:
Google about it..
we all should be polite enough to press thanks for anyone who helped US.
Click to expand...
Click to collapse
these might be silly questions, but since we now have root access - is there a standard Cyanogen mod for ICS we can install/along with the required CWM or do those need to be custom made for the specific customization of ICS 4.0.3/rom/kernel/bootloader/etc?
Not silly at all as far as I'm concerned.
But; from what I've read, there is no ROM that can be installed on everything. They all have to be modified to suit the hardware.
I'm still looking into ROM kitchens at this point to figure out what needs to be done to create a ROM.
Needless to say, this'll take a while though.
jack3643 said:
Thanks AJ88. Do you know any common tablets with these specs?
Specification
CPU - Amlogic Cortex A9 8726-MX Dual Core Processor
Processor - 1.5GHz
Operating system - Google Android 4.0
Display - IPS 9.7" 4:3, LCD panel
Resolution - 1024 x 768 resolution
Touch Screen - Capacitive Multi touch
Battery life - Li-Polymer, (up to 6 hours)
Internal Memory - 16 GB (expandable with micro SD memory card)
Memory - DDR3 1GB
WLAN / Wi-Fi - IEEE 802.11 b/g/n
Bluetooth - 2.1
UMTS / 3G - No
G Sensor - Screen Rotation
Cameras - Web Cam 0.3, 2.0 Megapixels rear camera
Microphone - Internal Microphone
USB 2.0 Input
Headphone Jack - 3.5mm Stereo Output
HDMI Output
Click to expand...
Click to collapse
If you find something that works let me know. I'm happy with ICS on mine, but I've found that the USB firmware is not exactly perfect and doesn't work properly through the Android API. You have to resort to the Kernel Native driver. I wouldn't mind finding a firmware that actually works properly.
If anyone is making a rom for this device, I'll be happy to assist, but i don't have any programing skills.
There are too many bugs on this system with Ice scream sandwich and hoping a rom would clean them out. Especially with updating the youtrube app on Google play.
paul.pavlinovich said:
If you find something that works let me know. I'm happy with ICS on mine, but I've found that the USB firmware is not exactly perfect and doesn't work properly through the Android API. You have to resort to the Kernel Native driver. I wouldn't mind finding a firmware that actually works properly.
Click to expand...
Click to collapse
Try the Ainol novo7 Elf2 Tablet at SlateDroid.com
After countless protests we've finally gotten the company AMLogic and Ainol to release sources. Though its dirty and incomplete, its something.
Some had a go at making CM9 too. The tablet uses the same SoC (AML-M6) so it has some compatible drivers, it would need to be cooked a certain different way to make it compatible though.
As for r00t, try:
SuperOneClick http://forum.xda-developers.com/showthread.php?t=803682
Download: http://shortfuse.org/?p=193
That should work, if it doesn't then try:
CF_ROOT http://forum.xda-developers.com/showthread.php?t=1687590
Download: https://play.google.com/store/apps/details?id=eu.chainfire.adbd
And if that shouldn't work, this one is guaranteed to work:
ADB Remount Timing Exploit *NEW*
http://forum.xda-developers.com/showthread.php?t=1886460
And if that didn't work, then its not the tablet's fault, you're to blame ; )
Kangal said:
Try the Ainol novo7 Elf2 Tablet at SlateDroid.com
After countless protests we've finally gotten the company AMLogic and Ainol to release sources. Though its dirty and incomplete, its something.
Some had a go at making CM9 too. The tablet uses the same SoC (AML-M6) so it has some compatible drivers, it would need to be cooked a certain different way to make it compatible though.
As for r00t, try:
SuperOneClick http://forum.xda-developers.com/showthread.php?t=803682
Download: http://shortfuse.org/?p=193
That should work, if it doesn't then try:
CF_ROOT http://forum.xda-developers.com/showthread.php?t=1687590
Download: https://play.google.com/store/apps/details?id=eu.chainfire.adbd
And if that shouldn't work, this one is guaranteed to work:
ADB Remount Timing Exploit *NEW*
http://forum.xda-developers.com/showthread.php?t=1886460
And if that didn't work, then its not the tablet's fault, you're to blame ; )
Click to expand...
Click to collapse
Thanks heaps,
I have successfully rooted my AMID-972XS device using the 3rd option, "ADB Remount timing Exploit *NEW*"
Removed youtube.apk with ES File Explorer from Google play Store.
Downloaded youtube app from http://forum.xda-developers.com/showthread.php?t=1699849 and installed it using Astro, from Google play store.
All works fine, thanks heaps
Hi, I'm experiencing weak wireless signal on the AMID-972XS while other devices like phone and laptop seem to pick a better signal at the same location.
Has anyone had this problem? I'm wondering if it's normal due to the hardware spec of the wireless card or is my unit faulty.
mrbarbz said:
Hi, I'm experiencing weak wireless signal on the AMID-972XS while other devices like phone and laptop seem to pick a better signal at the same location.
Has anyone had this problem? I'm wondering if it's normal due to the hardware spec of the wireless card or is my unit faulty.
Click to expand...
Click to collapse
mine works better than my phone and two laptops wifi reception-wise
svyr said:
mine works better than my phone and two laptops wifi reception-wise
Click to expand...
Click to collapse
I first thought it was a faulty tablet then I replaced it and I'm having the same problem with the new one.
When I try and load a youtube videos it takes a while and when it loads it keeps cutting out.
I check the wireless bar and find that there's only 2 of the 3 bars of signal.
But on my iPhone same located youtube videos load fast and no drop outs.
Hello,
A few days ago I received Hyundai T10 tablet. I turned it ON but the touch screen did not work (and still don't). I connected a USB mouse via the OTG port and I can move the cursor so I think the only problem is the touch screen. I tried to flash with other firmware but I found only one firmware for the tablet (sorry but I can't put links in threads) which I think it's the same and there is only one official firmware for the tablet (my thoughts). I searched for custom ROMs but did not found. The tablet is 10 inch and uses Samsung Exynos 4412 processor. So I think there may be 2 or more possibilities for this to happen:
1. There is a bug in the firmware.
2. The touch digitizer cable is not plugged in tablet's motherboard (which I think is casual problem when china factories make tablets on "burst mode" process like 10 000 a day)
If there is other possibility I think it will be moooore bad to fix it ;( bad I paid so much money for chinese tablet.
If the problem is the firmware..... all I can do is just some to be announced new firmware... which may be done... never. And it's not sure that the other firmware will fix the problem because the touch is fully unresponsive.
If it's the touch digitizer's cable not plugged in... I will need to open the tablet or send it to someone who has experience because I will probably 99,99% brake the tablet when opening it. But I give it to some technician he may broke something too. Because of the model.. you know.. not so famous chinese tablet he won't actually know what's right in the tablet and he may brake it too...
Last resort is to send back the tablet to China and pay for the shipping (yes, they want me to pay the shipping fees) and after they see that it's now working they will send me new one.
So guys... please can you give some advice or to guide me to do something that my tablet will work normally. Is there some method to see exactly what is going on with the tablet some diagnostic or idk... I will be very happy to see the tablet working
Thanks in advance
Is likely to be a software failure, try to upgrade. If not, you need to detect the touch screen cable is not loose. or reset to defaults,if those all doesn't work,the touch screen must be broken.
me too
HI,have you fixed the problrem? Can you help me?
i have the same problem that you , with just a difference, my hyundai T10 touch screen digitizer stop to work this evening , after one mount.
i bought it in may, for my son birthday, and now i just have a half brick device.
All work properly exeption for the digitizer. it work just with mouse.
i opened the device and i tried to move the digitizer connector , i put of it from the fpc connector, plug and re-plug , but nothing to do.
i belive it is a hardware iussue becouse it stop to work after i transport (with padding) the tablet from home to work, when i arrived at work i turned on the tablet , and the digitizer did't work anymore.
however i want to try others way before to waste it.
Can you help me? Can you give me some link for download firmware or anythig else for try to fix the problem?
this is my email address [email protected]
thank you for your help and your time.
sh1nny said:
Hello,
A few days ago I received Hyundai T10 tablet. I turned it ON but the touch screen did not work (and still don't). I connected a USB mouse via the OTG port and I can move the cursor so I think the only problem is the touch screen. I tried to flash with other firmware but I found only one firmware for the tablet (sorry but I can't put links in threads) which I think it's the same and there is only one official firmware for the tablet (my thoughts). I searched for custom ROMs but did not found. The tablet is 10 inch and uses Samsung Exynos 4412 processor. So I think there may be 2 or more possibilities for this to happen:
1. There is a bug in the firmware.
2. The touch digitizer cable is not plugged in tablet's motherboard (which I think is casual problem when china factories make tablets on "burst mode" process like 10 000 a day)
If there is other possibility I think it will be moooore bad to fix it ;( bad I paid so much money for chinese tablet.
If the problem is the firmware..... all I can do is just some to be announced new firmware... which may be done... never. And it's not sure that the other firmware will fix the problem because the touch is fully unresponsive.
If it's the touch digitizer's cable not plugged in... I will need to open the tablet or send it to someone who has experience because I will probably 99,99% brake the tablet when opening it. But I give it to some technician he may broke something too. Because of the model.. you know.. not so famous chinese tablet he won't actually know what's right in the tablet and he may brake it too...
Last resort is to send back the tablet to China and pay for the shipping (yes, they want me to pay the shipping fees) and after they see that it's now working they will send me new one.
So guys... please can you give some advice or to guide me to do something that my tablet will work normally. Is there some method to see exactly what is going on with the tablet some diagnostic or idk... I will be very happy to see the tablet working
Thanks in advance
Click to expand...
Click to collapse
Here is new firmware for Hyundai T10, hope it can help you. I had to send my T10 back to China for repair month ago.
http://www.mediafire.com/?esyc1x47o4k666p
pk76 said:
Here is new firmware for Hyundai T10, hope it can help you. I had to send my T10 back to China for repair month ago.
Click to expand...
Click to collapse
Just updated to this, and my tablet is now in Chinese. I cannot find anyway to get back to English, can anyone help?
EDIT: Got it into English
Hyundai T10 Touch screen digitizer code for buying
For whom it may concern
Here are the pictures of the touchscreen ordered from China , for my Hyundai T10 tablet :
https://dl-web.dropbox.com/get/Publ...ADyDkMszKCmGGEGIMA2d8X75BXmhl1o4vIsA78yNWGZKA
The code is ad-c-100971-FPC
I found it for buy at http://item.taobao.com/item.htm?spm=a1z10.5.w4002-1262823345.51.Po5Pwh&id=36827608659
at listing price of 130 Yuan
Hope it helps someone , someday , as I also found many interesting infos here ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SHARING IS GOOD ! ~~~~~~~~~~~~~~~~~~~~~~~~~~
firmware for this tab Mix Tab 7"
I need firmware for this tab Mix Tab 7" WIFI - 4GB -
*OS:
- Android 4.0
*Network:
- Wi-Fi 802.11b/g/n
*Display:
- 7" LCD 800 x 480 P Screen, 16:9
- 5 Points Capacitive touch screen
*Memory:
- Built-in 4 GB, TF Card Up To 32GB (not included)
- RAM : 512 MB
*Processor:
- Allwinner A13 ,Single core, 1.2GHz
*GPU:
- 3D Graph Engine, Mail-400 GPU @350MHZ
*Camera:
- Front 0.3MP
- Rear 1.3MP
*Audio:
- Output: 3.5mm Earphone
- Built-in speakers
*Interface:
- TF card slot, USB solt, DC Jack and Earphone Jack
thank you
I am looking for help on choosing the right android radio for my car.
I have a forester 2011 with gps buit in, but that super feature removed the a2dp fonctionalty !
That is all I wanted! !!
I have read these 2 thread AN-21U and 4.2.2 a9 dual core
These 2 are hard to find on ebay !
I have a galaxy s5, note 2014 and wife has galaxy s3... we are very in android.
What I would like on the radio is:
- a2dp perfectly working
-good gps with available free updates (without having to always use google maps on tethering from my phone). But Google maps still available
- port for microphone (unless the micro from the head unit is good for phone call. .. but I doubt it! ). I could use the one already installed in my car
-steering wheel control. .. they all seams to have it
-able to browse Internet and YouTube videos (on tethering)... flash player probably working with firefox...
-torque apps should work. .. already using it on my phone (OBDII)
-google account working linked with chrome
-good radio reception. .. the is a must since this is my. ...radio! !
-fast boot time. .. or even being able to stay on sleep mode. I guess 30 secondes is fast enough, but might get slower with more apps I guess !
-tv tunner would be awesome
-reverse camera
Am I dreaming wanting all this ?
Between 350 and 400$ should be doable !
Root is not necessary since I might end up with more problems. (Radio not working, steering wheel issue, ect) But rooting can solve a bunch of problem too...
Thank you very much for your help.
Reading both thread above did not really helped me. .. the first one seams to have a bunch of issues. .. and icannot find the second on ebay on simple double din .
Martin L.
This one seams ok... would it be a good choice ?
http://pages.ebay.com/link/?nav=item.view&id=301197118041&alt=web
Is it one of the 2 listed above ?
Please give me a little help here!
Even if I read all the descriptions. .. it is always better to ask a person who owns one!
Too easy to waste money buying something you think does all you want! !
Thank you
genius312 said:
Please give me a little help here!
Even if I read all the descriptions. .. it is always better to ask a person who owns one!
Too easy to waste money buying something you think does all you want! !
Thank you
Click to expand...
Click to collapse
ive also been on the market and looking but from reading peoples post on different h/u its pretty save to say its all a gamble most of these units are chinese built and the build quality is questionable some units have good features but lack memory the units you may wanna look into more would be the ones with some sort dev support and root those seems to be the ones that if there is an issue at least someone can come up with a solution also you may wanna stay away from h/u that are windows CE as they run android on a top of the windows and may lack android features
Thank you very much for your help.
That is exactly what I thought, a gumble !
After reading the first thread posted above (AN-21U), it seams to have to much issues.
But the other about the 4.2.2 a9 dual core seams very interesting. but I cannot find any of those on ebay searching by the names HuiFei/KGL (KGL), Klyde (KLD) or RoadMaster (RM) !
There is a buch of 4.2.2 a9 dual core.. 1.2ghz, 1.6ghz, 1gb ram, 2Gb ram .. they might all be fake, I cannot know !
It seams all the auction lake on real detail about the product (model #, ect).
Is there anyway I can by certain I order on of the HuiFei/KGL (KGL), Klyde (KLD) or RoadMaster (RM) ?
genius312 said:
I am looking for help on choosing the right android radio for my car.
I have a forester 2011 with gps buit in, but that super feature removed the a2dp fonctionalty !
That is all I wanted! !!
I have read these 2 thread AN-21U and 4.2.2 a9 dual core
These 2 are hard to find on ebay !
I have a galaxy s5, note 2014 and wife has galaxy s3... we are very in android.
What I would like on the radio is:
- a2dp perfectly working
-good gps with available free updates (without having to always use google maps on tethering from my phone). But Google maps still available
- port for microphone (unless the micro from the head unit is good for phone call. .. but I doubt it! ). I could use the one already installed in my car
-steering wheel control. .. they all seams to have it
-able to browse Internet and YouTube videos (on tethering)... flash player probably working with firefox...
-torque apps should work. .. already using it on my phone (OBDII)
-google account working linked with chrome
-good radio reception. .. the is a must since this is my. ...radio! !
-fast boot time. .. or even being able to stay on sleep mode. I guess 30 secondes is fast enough, but might get slower with more apps I guess !
-tv tunner would be awesome
-reverse camera
Am I dreaming wanting all this ?
Between 350 and 400$ should be doable !
Root is not necessary since I might end up with more problems. (Radio not working, steering wheel issue, ect) But rooting can solve a bunch of problem too...
Thank you very much for your help.
Reading both thread above did not really helped me. .. the first one seams to have a bunch of issues. .. and icannot find the second on ebay on simple double din .
Martin L.
Click to expand...
Click to collapse
Hello Martin,
I dont know your car type, but I recomend DX.com for buy things from China. Try to find with: "autoradio" and "android" keyword.
Eg.: Joyous 8" J-8813-8A for VW group cars.
BR, Mark
It is said in my forst post that you quoted, it is a subaru forester 2011 !
Simple double DIN will work in my car, no special fitting is needed !
If I find a good one with RK3066 processor, does that mean this is the right one (from the second link of my first post) ?
Just an example, looking at that file: HuiFei/Klyde/RoadMaster Reference, I clearly see what the Hui Fei and roadmaster look like.
But since there is more info on the Klyde one, this is the one I would like to buy but I cannot see what the head unit look like !
Searching the web for Klyde android car, I see a LOT og different model ... which one is the right one ?
I don't think any Klyde model will work, I need the right one !
Same thing for RoadMaster ... I can find the model I see on the picture on ebay, but no way to be sure it is the right one !
This video is for Klyde: Youtube Video but does not seams to be the one on the file !
If it is, this might be the one I want !
Thank you for your help !
The problem is they are all Chinese built so they tend to be all nock offs of each other you have to get a confirmed hardware specs for the klyde unit and then when you search look for the same hardware its small difference in hardware it could be the GPU or the ram or etc. Even though they all look similar its the internals that will tell you which is which ....I'm currently looking for a unit with 4.4 and 1024*720 screen resolution I found one in a Europe site but am trying to see if I find it on eBay I have a wrx sti ::subie wave::
I see a lot of Ouku that seams good, but as it is not mentioned anyway in here, I guess these are not a good idea to buy !
They where good at one point but now theirs more competition out there
ker2gsr said:
They where good at one point but now theirs more competition out there
Click to expand...
Click to collapse
Thank you for sending me this link: New Model, but I find it weird that they wrote: can be upgraded to Android 5.0 .....
I need a little help here !
I have 25Tabs onped on my Chrome, I read everything written here on XDA.
I can see that the RM are bugless, so that might be what I want!
But I find no where I can buy them exect from aliexpress.com, but they are not cheap at all !
This one seams perfect and cheap, but from WinLink ?!?!?! WinLink
Or that one from Zhoon with 7" display that seams good: Zhoon
Or one from Infidini Infidini
All I really want is to be able to charge my cell (1 USB and Built-in Wifi), have my OBDII bluwtooth connected with my cell. And be able to have my music on bluetooth. Also have the reverse camera and steering wheelm control !
They practicly all have these features, but the best is a pure android and being able to root !
All the link I find here to buy one are no longer working, so ther eis no place to buy one.
Except from aliexpress.com where Rm are really expensive, and Ebay where you have no idea what you are buying !!
Please, I want to order one! I am so tired of my Pioneer always crashing in my car !
This is what I am looking for, but I don't want to order 100 of 'em RoadMaster
You want one that is multi channel Bluetooth too if not you either do obd or phone but not both that's something to consider also
Ok, i am really going to buy one, but only need a little piece of advice before i do !
I finally found a klyde not to expensive : klyde
Can i use the bluetooth for anything else then my phone ( with obd dongle for example).
Is the microphone good enough for phone call ?
I have been searching for that model since i see in other threads that they seams to be good. .. with no bugs !
But now that we are already in September, is there better product ?
Maybe this one is better ? http://m.aliexpress.com/item-desc/1948364463.html
please help