i need some help i try search but my english not good and can't read big topic
i need to know
1-how to take copy from my firamware if i want to back to it again
2- i see alot of cooked room but don't know which one i setup to my mobile which one is more stable
3- if there any topic or video can explain to my step by step
m.hussein said:
i need some help i try search but my english not good and can't read big topic
i need to know
1-how to take copy from my firamware if i want to back to it again
2- i see alot of cooked room but don't know which one i setup to my mobile which one is more stable
3- if there any topic or video can explain to my step by step
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1038338 chk if reading this helps
http://www.youtube.com/watch?v=clSNMKWLqJA
if u have optimus p500 or optimus t use this http://forum.xda-developers.com/showthread.php?t=946354
or any rom of ur choice from here http://forum.xda-developers.com/forumdisplay.php?f=839
for optimus v http://forum.xda-developers.com/forumdisplay.php?f=1089
you can find links for rom cooking here:
http://forum.xda-developers.com/showpost.php?p=17416779&postcount=2
thank you for help I will install
this http://forum.xda-developers.com/showthread.php?t=946354
can i know
what the difference between bootloader and recovery
and if i setup this room do i have to setup kernels ???
and how i know i (Old Baseband only. Nnew will be supported when I will have more time.
Only beta6.6 and above configured to use 2.6.35 kernel!)
i don;t know what if my baseband old or new
my mobile inf
kernel version 2.6.32.9
build number
frg83
software version
lgp503 -v10e-dec-02-2010
m.hussein said:
can i know
what the difference between bootloader and recovery
and if i setup this room do i have to setup kernels ???
and how i know i (Old Baseband only. Nnew will be supported when I will have more time.
Only beta6.6 and above configured to use 2.6.35 kernel!)
i don;t know what if my baseband old or new
my mobile inf
kernel version 2.6.32.9
build number
frg83
software version
lgp503 -v10e-dec-02-2010
Click to expand...
Click to collapse
you dont need to worry about bootloader.
a custom recovery allows you to flash files, make backups, partition your sdcard, etc (more info on recovery here)
as for the kernel, you can first flash the rom and then the kernel (it is optional)
if you dont know what your baseband is, chances are you have the old baseband
general directions to flash a rom can be found here:
http://forum.xda-developers.com/showpost.php?p=15309588&postcount=2
but keep in mind, you must also follow the directions on the rom's thread
Hey!
If anything else you need, our team is there to help u, contact us when you need anything
Related
hi guys I am users from X10 Forums... I just bought an Optimus One as my secondary handset...
My device details:
Model No: LG-P500
Android Version: 2.2.1
Kernel version: 2.6.32.9
Build No.: FRG83
Software Version: v10c-DEC-08-2010
can anyone give me a rundown on the current stuff going on in this forum?
also i need info on :
rooting
recovery (stock/custom)
stock firmware flashing
basebands available
PC based tools available for this device
custom kernels
custom roms (froyo & GB) and the current status of these roms...
if someone can guide me to the relevant How-To threads/links...
any help is highly appreciated...
thank you...
DooMLoRD said:
hi guys I am users from X10 Forums... I just bought an Optimus One as my secondary handset...
My device details:
Model No: LG-P500
Android Version: 2.2.1
Kernel version: 2.6.32.9
Build No.: FRG83
Software Version: v10c-DEC-08-2010
can anyone give me a rundown on the current stuff going on in this forum?
also i need info on :
rooting
recovery (stock/custom)
stock firmware flashing
basebands available
PC based tools available for this device
custom kernels
custom roms (froyo & GB) and the current status of these roms...
if someone can guide me to the relevant How-To threads/links...
any help is highly appreciated...
thank you...
Click to expand...
Click to collapse
Tough luck , that you received a 2.2.1 device . If you do want to root and get into business you have to downgrade to 2.2 through what I would recommend KDZ ( V10B is a good firmware ) .
DooMLoRD said:
hi guys I am users from X10 Forums... I just bought an Optimus One as my secondary handset...
My device details:
Model No: LG-P500
Android Version: 2.2.1
Kernel version: 2.6.32.9
Build No.: FRG83
Software Version: v10c-DEC-08-2010
can anyone give me a rundown on the current stuff going on in this forum?
also i need info on :
rooting
recovery (stock/custom)
stock firmware flashing
basebands available
PC based tools available for this device
custom kernels
custom roms (froyo & GB) and the current status of these roms...
if someone can guide me to the relevant How-To threads/links...
any help is highly appreciated...
thank you...
Click to expand...
Click to collapse
FIRST CHECK THE VERSION OF UR ANDROID ROM U NEED 2.2 IF NOT THEN DOWNGRADE USING KDZ http://forum.xda-developers.com/show...=875881&page=7 THE BEST DESCRIBED LINK (NOTEONT FORGET TO ENABLE USB DEBUGGING AND DISABLE MODEM DRIVERS) U NEED V10B
ROOTING YOUR DEVICE http://forum.xda-developers.com/showthread.php?t=833953
INSTALLING CUSTOM RECOVERY http://androidforums.com/getitnowmar...ml#post1896517 1.2.1 IS THE LATEST VERSION
A2SD SUPPORT http://forum.xda-developers.com/showthread.php?t=715940
ITS WORTH TRYING CM7 ITS AWESOME
shhbz said:
FIRST CHECK THE VERSION OF UR ANDROID ROM U NEED 2.2 IF NOT THEN DOWNGRADE USING KDZ http://forum.xda-developers.com/show...=875881&page=7 THE BEST DESCRIBED LINK (NOTEONT FORGET TO ENABLE USB DEBUGGING AND DISABLE MODEM DRIVERS) U NEED V10B
ROOTING YOUR DEVICE http://forum.xda-developers.com/showthread.php?t=833953
INSTALLING CUSTOM RECOVERY http://androidforums.com/getitnowmar...ml#post1896517 1.2.1 IS THE LATEST VERSION
A2SD SUPPORT http://forum.xda-developers.com/showthread.php?t=715940
ITS WORTH TRYING CM7 ITS AWESOME
Click to expand...
Click to collapse
thanks for the info dude... the thing is some links that u posted are broken... (try clicking on the posted links) copy paste problem
can u please provide correct links?
downgrade
http://forum.xda-developers.com/showthread.php?t=883314
rooting and custom recovery
sdk maybe not now but later u will find it useful
http://forum.xda-developers.com/showthread.php?t=1007244
and many usefull info
http://forum.xda-developers.com/showthread.php?t=901247
ciolnadu said:
downgrade
http://forum.xda-developers.com/showthread.php?t=883314
rooting and custom recovery
sdk maybe not now but later u will find it useful
http://forum.xda-developers.com/showthread.php?t=1007244
and many usefull info
http://forum.xda-developers.com/showthread.php?t=901247
Click to expand...
Click to collapse
thanks... started off now...
DOWNGRADE : check (now on 2.2 , soft version: V10b-OCT-02-2010)
ROOTING : check (used my favorite SuperOneClick v1.7-shortfuse and RageAgainstTheCage attack)[apparently was getting stuck at psneuter attack ]
CUSTOM RECOVERY : check (i dont get it why u guys are worrying so much abt android sdk... u just need 3 files for ADB to work adb.exe | AdbWinApi.dll | AdbWinUsbApi.dll thats it... no need to download whole SDK and then further do repo downloads )
now need help with ROMS & KERNELS... from wht i have been reading u need to WIPE SDCARD to install ROMs??? why? for A2SD? doesnt Froyo+ android version already support app2sd? i dont want to partition my sdcard (use it on many devices)... can i still install custom ROMs available here?
i want a stable / low battery hogging ROM... 2.3 preferred (although 2.2 will also do) which can support custom kernels
i see some undervolted and overclocked kernels available... excited to try them out...
any suggestions on these?
thank you all for ur help!!!
Sdcard wipe is necessary only if using an ext partition. Some ROMs need it, some not.
There are 0 kernels with undervolting.
You should test a Froyo ROM and then a Gingerbread one to see the differences.
Good luck !
Agreed with badeaioan.
You should try a custom Froyo based ROM before anything else and that's because once you get to a GB ROM you will not want to go back.
I have 2.1.71 as a baseband, and noticed there are no threads about this (as far as I can tell, the highest i saw was .67.
Can I still downgrade? If so, please provide a link. I just want a nice, easy custom ROM to use.
Also, can someone please help with Custom ROM installation? Any ROM will do, just give a step by step walkthrough on how to do it, or provide a link to a walkthrough. Doesn't matter which custom ROM, just any.
ANOTHER question: I flashed my firmware, to x10i. My phone is originally an x10a. Is that bad? I've been using it for awhile and there've been no problems.
And which one is more supportive of custom ROMS?
if u want a custom ROM based on android 2.3 then all uses baseband 2.1.71 so no need to downgrade imo !! any ROM can be choosen like depends on ur usage coz every ROM out there has some different features !! installing a ROM is a easy task and mostly the ROM thread consists of the instructions on how to install ROM
and check these links both will be of great help
http://forum.xda-developers.com/showthread.php?t=1209749
http://forum.xda-developers.com/showthread.php?t=678513
What ROMs are using new baseband? i dont want downgrade to old one. Now iam using OpenOptimus, but there is some bugs in it. Like MIUI Music crashes and camera flickering. I realy like that Xperia themed ROM but that is old baseband
only modified LG rom's have new baseband - pure gingerbread roms like CM7 or Phoenix rom uses old baseband because its a technical desaster to recode all that things for new
baseband.
// end of developer statement
Among ROMs based on new baseband i found OPENOPTIMUS as the best.
http://forum.xda-developers.com/showthread.php?t=1208215
I used both basebands and found no difference as far as call quality is concerned. So better to downgrade baseband as you will have more roms supported.
downgrading baseband is risky thing and i cant find easy solution for that. onyl kdz updater and stock firmware. but then i lost custom recovery too
darkfiremark said:
downgrading baseband is risky thing and i cant find easy solution for that. onyl kdz updater and stock firmware. but then i lost custom recovery too
Click to expand...
Click to collapse
I did it many times and didnt find any problems doing it.
(unless u r doin it on pc n there is a power cut)
you can follow picture guide here for downgrading baseband
http://forum.xda-developers.com/showthread.php?t=1217504
IF not this install cm7 mik's rom and new baseband patch with this you can have gsm working but not data.
For flashing stock rom and stock recovery you can try this without kdz(if u r afraid of it like me)
follow "cook your custom rom" till step 2
cook your custom rom- http://forum.xda-developers.com/showthread.php?t=901417
(disable lg modem before start)
Now start lgmdp and
select port
select image folder the created "stockrom" folder
Now uncheck "recovery image" option (to have custom recovery retained & check to have stock recovery)
then download.
(donot disconnect untill it shows download complete)
Note: i didnot test it , but i think it should work.
tnx, iam going to try that out
Hi all,
it can be a very N00B question but this thread is a mess and I can not find things I really need.
I succesfully rooted and completely modified both HTC G1 and the new Galaxy Nexus, but now, a friend of mine has this LG P500 and im looking around trying to find all the necessary to root - recovery etc ..
now..
I will use SuperOneClick because it is a 2.3.3 Android FW.
I will Flash AmonRa recovery 3.06 found in a P500 Android development Thread, as flashable zip.
Im gonna use .35 kernel from Franco, 'cos Im using it on my GN and it works like a charm.
But, I cannot find a good rom!! is there anybody who can help me?
This phone now is:
kernel 2.6.35.10
android version 2.3.3
the only things I know
Thank u all!
you can use the kang version by adam. It is CyanogenMod 7.2.
http://www.mediafire.com/?p0di9g79ck80a0c
For the recovery, i will suggest you use ClockWorkMod. Download it from the market. The latest version is 5.0.0.6 and please be ensured to flash the 5.0.2.0 recovery version as the latest version is buggy.
I'm downloading it!! thank you
do you know if there is any new Radio ? I can't tell you which baseband this phone is using now btw, she cant find the "version" from "about phone"
P4p3r1n0 said:
I'm downloading it!! thank you
do you know if there is any new Radio ? I can't tell you which baseband this phone is using now btw, she cant find the "version" from "about phone"
Click to expand...
Click to collapse
If you before had stock gingerbread then you had the new baseband version. If not, you need to flash the new baseband as all new roms are now based on new baseband.
Follow this link for flashing new radio.
http://forum.xda-developers.com/showthread.php?t=1149530
cool!! thank u Im ready to go now!
Hello everybody
One friend will get his lg p506, and i want to help him "modding" his new phone, but i have some doubts
1) If a want install CM 7.2, i have to flash the new baseband first? if the answer is yes, how? just flash like p500 o i have to do something more with p506?
2) The recovery is special for thi model? or just can install it from rom manager?
3) i can install p500's roms or exist specific roms to p506?
4) The last one, exist some kmz file to update the p506 to gingerbread or i can use one of p500?? I think that from that way i can get new baseband
Thanks a lot for your help
Jkmoran said:
Hello everybody
One friend will get his lg p506, and i want to help him "modding" his new phone, but i have some doubts
1) If a want install CM 7.2, i have to flash the new baseband first? if the answer is yes, how? just flash like p500 o i have to do something more with p506?
2) The recovery is special for thi model? or just can install it from rom manager?
3) i can install p500's roms or exist specific roms to p506?
4) The last one, exist some kmz file to update the p506 to gingerbread or i can use one of p500?? I think that from that way i can get new baseband
Thanks a lot for your help
Click to expand...
Click to collapse
there is a really active thrive/pheonix forum in android central
1. you need new baseband. you need to flash baseband specific to thrive(i think)
2. only p506 roms. p500 and p506 are cousins but not the same.
3. DO NOT FLASH P500 ROM THROUGH KDZ TO P506 it might brick your phone.
for new baseband, once you find the right files. the method should b e the same for all devices though