Problems: Stuck after install custom rom - Sony Ericsson XPERIA X10 Mini

Hello, i have a big problem with my phone, the phone stuck at SE logo, if remove battery and restart again the phone maybe start normal, but the problem is that i flash phone with original rom and the problem is same, i update at lastest firmware... is time when have a lot of error and phone restart and stuck or start long time. Who can help me? sorry for my enghish

diniulian said:
Hello, i have a big problem with my phone, the phone stuck at SE logo, if remove battery and restart again the phone maybe start normal, but the problem is that i flash phone with original rom and the problem is same, i update at lastest firmware... is time when have a lot of error and phone restart and stuck or start long time. Who can help me? sorry for my enghish
Click to expand...
Click to collapse
Flash again with SE Update Service

@diniulian
dont panic when something goes wrong. Do a full update using SE update service, and then try if it boots well. post results

Tommylee567 said:
@diniulian
dont panic when something goes wrong. Do a full update using SE update service, and then try if it boots well. post results
Click to expand...
Click to collapse
THX for reply
can help me with a link to download , i search on google but i can't find the SE update service, the links with seus redirect me to sonyericsson.com to download pc companion.

I succeed to find SE update service, i installed and i made a full update, but the problem is same, stuck at SE logo... . It's posible to be a hardware problem? All that problems was apper after instal a custom rom (GingerDx pro v15). now the phone stuck at se logo. Another solution ? pls hlp

im sorry as i dont know what to reply. i guess the devs may have an idea.
if you tell the probably tell the steps exactly what you did, someone else can help you with this.

THX for your answer
ok, i will tell u step by step :
First a had rooted phone and install a custom rom ( [ROM] 2.1.1.Clean.0.0 ) and i wanted install custom rom GingerDX v15, so i run in xrecovery instal update.zip and after phone stuck at se logo, i remove battery to restart and run again new custom rom but the phone stuck. I flash phone with original rom but the problem remained same, phone stuck at se logo. Is time when phone run normal, but is time when stuck..., and i have a problem with a lot of errors like: "Sorry application nnnn.vvvv.com can't....." Exist a special soft to full hard and soft reset and flash or any solution?

Similar problem....urgent help.plz...
Hi... I rooted and install xrecovery on my xperia x10 mini...in order to install custom rom...i had old buggy firmware 2.0.1 somthing like that ...so I fist have to update my android to 2.1.A etc firmware....but pc companion was not detecting my phone (when switched off) during step u know "connect to usb while holding back button".... But my windows xp n 7 both gave errors of "not recognizing usb".... So I stupiditly went to custom rom and installed the latest custom rom from sdcard(without updating to latest firmware from pc companion)....the custom rom installed successfully.....but phone is stuck on se logo.... Now im not able to go to recovery mode....neither I am able to switch off my phone as power button not working.... X10 mini battery cant be removed .... What should I do now?? Plz help quick .... Plz

diniulian said:
THX for your answer
ok, i will tell u step by step :
First a had rooted phone and install a custom rom ( [ROM] 2.1.1.Clean.0.0 ) and i wanted install custom rom GingerDX v15, so i run in xrecovery instal update.zip and after phone stuck at se logo, i remove battery to restart and run again new custom rom but the phone stuck. I flash phone with original rom but the problem remained same, phone stuck at se logo. Is time when phone run normal, but is time when stuck..., and i have a problem with a lot of errors like: "Sorry application nnnn.vvvv.com can't....." Exist a special soft to full hard and soft reset and flash or any solution?
Click to expand...
Click to collapse
Step to instal custom ROM :
1. copy ROM to sd card
2. boot in CWM or xrecovery (see the ROM instalation requitments)
3. factory reset/full wipe, wipe cache, wipe dalvik cache.
4. instal zip from sd card (chose the ROM)
5. reboot
i think you can't instal GinggerDX v 15 with Xrecovery, you must instal with CWM recovery
---------- Post added at 10:21 AM ---------- Previous post was at 10:00 AM ----------
rang6300 said:
Hi... I rooted and install xrecovery on my xperia x10 mini...in order to install custom rom...i had old buggy firmware 2.0.1 somthing like that ...so I fist have to update my android to 2.1.A etc firmware....but pc companion was not detecting my phone (when switched off) during step u know "connect to usb while holding back button".... But my windows xp n 7 both gave errors of "not recognizing usb".... So I stupiditly went to custom rom and installed the latest custom rom from sdcard(without updating to latest firmware from pc companion)....the custom rom installed successfully.....but phone is stuck on se logo.... Now im not able to go to recovery mode....neither I am able to switch off my phone as power button not working.... X10 mini battery cant be removed .... What should I do now?? Plz help quick .... Plz
Click to expand...
Click to collapse
repair with SE Update Service.
you must have same firmware in ROM requitments before instaled.

stiv8785 said:
Step to instal custom ROM :
1. copy ROM to sd card
2. boot in CWM or xrecovery (see the ROM instalation requitments)
3. factory reset/full wipe, wipe cache, wipe dalvik cache.
4. instal zip from sd card (chose the ROM)
5. reboot
i think you can't instal GinggerDX v 15 with Xrecovery, you must instal with CWM recovery
---------- Post added at 10:21 AM ---------- Previous post was at 10:00 AM ----------
repair with SE Update Service.
you must have same firmware in ROM requitments before instaled.
Click to expand...
Click to collapse
I will try to factory reset/full wipe, wipe cache, wipe dalvik cache, now i can't run in xrecovery, i root the phone, install xrecovery 1.85 and copy the 3 files (busybox, chargemon and xrecovery.tar) to system/bin, restart the phone (with posibility to stuck at se logo) and push back back... and nothing, or stuck at se logo or run normal...
I want to sell but must be repair of this problem, i want to be serious seller.

I'm back with news, i succed to run in xrecovery, i factory reset/full wipe, wipe cache, wipe dalvik cache, problem is same , so i decided to install a custom rom (211Clean00), and i have a surprise with one new error :
E:can't symlink /system/xbin/su
E: failure at line 236: symlink /system/bin/su System:xbin/su
Installation aborded.

diniulian said:
I will try to factory reset/full wipe, wipe cache, wipe dalvik cache, now i can't run in xrecovery, i root the phone, install xrecovery 1.85 and copy the 3 files (busybox, chargemon and xrecovery.tar) to system/bin, restart the phone (with posibility to stuck at se logo) and push back back... and nothing, or stuck at se logo or run normal...
I want to sell but must be repair of this problem, i want to be serious seller.
Click to expand...
Click to collapse
Don,t use xrecovery to install the ROM, most rom now installed with cwm recovery not xrecovery.
here thread to instal cwm recovery http://forum.xda-developers.com/showthread.php?t=1257701
and read carefully the installation instructions in the thread ROM.
---------- Post added at 02:08 AM ---------- Previous post was at 02:05 AM ----------
diniulian said:
I'm back with news, i succed to run in xrecovery, i factory reset/full wipe, wipe cache, wipe dalvik cache, problem is same , so i decided to install a custom rom (211Clean00), and i have a surprise with one new error :
E:can't symlink /system/xbin/su
E: failure at line 236: symlink /system/bin/su System:xbin/su
Installation aborded.
Click to expand...
Click to collapse
Flash with SE Update Service

Related

[Q] Please Help. X10 mini struck at SE logo page

Hi,
I tried to flas MiniCM7_Pro_V18.zip with clockwordmod and once I restarted, it said corrupted ROM.
Now when I restarted my phone it is stuck at SE logo page.
Please help
-Factory reset
-wipe cache
-wipe dalvink
Boot into recovery (click the 'back' button when booting). Reinstall the rom (try a previous or alternative version), repeat the process described above (backup + factory reset), and reboot twice, you are good to go, no worries.
I had clockwordmod installed, however while flashing the new ROM, that went off.
Now I am unable to go back into recovery by pressing back button, cannot do a factory reset, its just struck at SE loga
The ROM installed was a bad one...
sandebal said:
I had clockwordmod installed, however while flashing the new ROM, that went off.
Now I am unable to go back into recovery by pressing back button, cannot do a factory reset, its just struck at SE loga
The ROM installed was a bad one...
Click to expand...
Click to collapse
Just a corrupted download, miniCM7 works fine.
To unbrick your phone, use SEUS. Reinstall your SE stock rom and start teh proccess again: root your phone, instal CWM again, download a new rom and flash it.
I hope that helped. I know there is a tut here in xda bout this proccess but I just coudn't find it.
Thanks nit3wolf
I am again a happy X10 mini pro user. Fantastic help.
Searched the flash tool, ftf for x10 min pro stock and done.
My first time helping anyone here, I'm happy I was usefull!
You're always welcome, bro.
Cheers!

Problem when flashing rom

Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
draxx318is said:
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
Click to expand...
Click to collapse
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
kunmii said:
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
Click to expand...
Click to collapse
It worked! big thanks!!!

[Q] NeoV stucked at Sony logo after installing rom

i've installing MIUI rom v4(3.2.22) for my neov ics..
at my old thread..the xda'er says it works well with my .587 kernel
so i did
Spoiler
How to Install MIUIv4:
1) Download & copy ROM file to your SD-card
2) Download and flash any ICS kernel for your phone. (you can find some of them here)
3) Enter in to CWM and do factory reset, wipe cache, wipe dalvik cache.
4) Flash ROM using "Install zip from SD-card" (Use Install for Locked boot option in ROM setup if your use kernel without Init.d support, and for Unlocked boot if it support)
5) Install Wi-Fi modules if this require your kernel (optional) (some kernels require modules to WiFi works, but not all)
6) Reboot your phone.
7) 1st boot will be much longer (5 mins maximum)
8) Reboot after 1st boot.
Click to expand...
Click to collapse
Ihave done everything..factory resetted,cache wiped, dalvik as well..refer to the quote, 1st boot will be much longer, 5mins for maximum..but i;ve left there 1hours still nothing happen
URGENT..my mum probaly will kill me if she knows i made my bday present like this!!
Info:
Havent unlock bootloader(althought its allowed)
4.1.b.0.587 stock ics kernel
Hey!
ItsNick said:
i've installing MIUI rom v4(3.2.22) for my neov ics..
at my old thread..the xda'er says it works well with my .587 kernel
so i did
Ihave done everything..factory resetted,cache wiped, dalvik as well..refer to the quote, 1st boot will be much longer, 5mins for maximum..but i;ve left there 1hours still nothing happen
URGENT..my mum probaly will kill me if she knows i made my bday present like this!!
Info:
Havent unlock bootloader(althought its allowed)
4.1.b.0.587 stock ics kernel
Click to expand...
Click to collapse
Dont Worry man..!
just download sony pc companion or SEUS,
and just connect phone and click update...
just follow the simple steps..
Please hit 'thanks' if i helped
As srik9999 said download seus and just repair it.
You can use flashtool too but i reccomend seus.
Also when it says first boot might take some time it means that you will have already accesed your bootanimation and you wait.
Just a last thing. You probably did something wrong or you used a download manager and your zip got corrupted
srik9999 said:
Dont Worry man..!
just download sony pc companion or SEUS,
and just connect phone and click update...
just follow the simple steps..
Please hit 'thanks' if i helped
Click to expand...
Click to collapse
martirio3000 said:
As srik9999 said download seus and just repair it.
You can use flashtool too but i reccomend seus.
Also when it says first boot might take some time it means that you will have already accesed your bootanimation and you wait.
Just a last thing. You probably did something wrong or you used a download manager and your zip got corrupted
Click to expand...
Click to collapse
my seus always say device disconnected but i dint even touch it..
ItsNick said:
i've installing MIUI rom v4(3.2.22) for my neov ics..
at my old thread..the xda'er says it works well with my .587 kernel
so i did
Ihave done everything..factory resetted,cache wiped, dalvik as well..refer to the quote, 1st boot will be much longer, 5mins for maximum..but i;ve left there 1hours still nothing happen
URGENT..my mum probaly will kill me if she knows i made my bday present like this!!
Info:
Havent unlock bootloader(althought its allowed)
4.1.b.0.587 stock ics kernel
Click to expand...
Click to collapse
You have missed an very very important step......yo need the format the system after doing a factory reset....
I have also got stucked in sony logo for many times before knowing the format /system....flash the rom again using flash tool and install the custom rom using below steps.
1: full factory reset
2: wipe dalvik
3: wipe cache
4: wipe battery stast (not very important)
5: format system
6: format data
7: format cache
8: flash the rom
9: in aroma
10: wipe dalvik and cache (IN AROMA!!!)
11: install your needed files like rom etc and files you want
12: reboot
13: done
the above steps wrks perfect for me....Hope its useful for everyone who got stuck in sony logo....
ItsNick said:
my seus always say device disconnected but i dint even touch it..
Click to expand...
Click to collapse
Just use flashtool & flash stock ftf with full wipe
Sent from my MT11i using Tapatalk 2

[NEED HELP!] xperia mini stuck on sony logo

Hey guys,
I really need help about flashig a custom rom for my xperia mini. Because whenever i flash this custom rom(Zelly Cream) it successfully installed and i followed everything in the procedures given by the dev (wipe cahe/data/ format system etc) but the problem is when i reboot the system it wont go through the sony logo and i cant even access to the recovery. The only thing that i did is flashing again the stock firmware to fix the problem. But i want to use a custom rom. Need help guys! my mini is rooted, installed cwm 5.0, locked bootloader, stock kernel, build no. 587.
I would really appreciate if someone can help me.
Thanks in advance
Dont worry Bro!! i ve got The solution!!
The reason this happened is because u forgot to format system from mount and storage!! No big deal!!
Now since u have a locked bootloader in order to unbrick ur phone u have to download sony update Service from sony site...
n follow the Procedure On screen!!
n ull get stock official ICS!! n unbrick ur Phone!!
Dont Worry!
U have root ur Fone again!! :fingers-crossed:
Cheers!:good:
Do hit Thanks !! :cyclops:
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
Zedfailon said:
Hey guys,
I really need help about flashig a custom rom for my xperia mini. Because whenever i flash this custom rom(Zelly Cream) it successfully installed and i followed everything in the procedures given by the dev (wipe cahe/data/ format system etc) but the problem is when i reboot the system it wont go through the sony logo and i cant even access to the recovery. The only thing that i did is flashing again the stock firmware to fix the problem. But i want to use a custom rom. Need help guys! my mini is rooted, installed cwm 5.0, locked bootloader, stock kernel, build no. 587.
I would really appreciate if someone can help me.
Thanks in advance
Click to expand...
Click to collapse
did u wipe Dalvik Cache!???
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Note: After installation, first boot may take several minutes (to create cache, dalvik cache etc.) to start your device. Leave your device for 20-30 minutes to settle down the rom. Also at first boot you may notice a high ram usages (less free ram). It is natural because android system occupy a lot of memory while settling down the new rom. After 30-40 minutes reboot your device and you are now ready to fly with your newly installed rom.
Click to expand...
Click to collapse
Sent from my SK17i running stock ics (.587)
yes
superRiyaz said:
The reason this happened is because u forgot to format system from mount and storage!! No big deal!!
Now since u have a locked bootloader in order to unbrick ur phone u have to download sony update Service from sony site...
n follow the Procedure On screen!!
n ull get stock official ICS!! n unbrick ur Phone!!
Dont Worry!
U have root ur Fone again!! :fingers-crossed:
Cheers!:good:
Do hit Thanks !! :cyclops:
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
did u wipe Dalvik Cache!???
Click to expand...
Click to collapse
Yes i've followed every instruction. (wipe dalvik cache, cache, format system, format data) but still i cant go through the sony logo. Now my current rom is the stock rom ics build no. 587. Rooted and installed cwm
Btw, thanks for the reply
mihahn said:
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Yes bro. I did it twice already and the same thing happened. I chose xperia mini and followed all other stuff in the aroma installer, untick the reboot device, etc. But still no luck of going through the sony logo. i've left my phone for over 1hour and its still in the sony logo.
Have you selected locked bootloader option in Aroma installer? I tried Zelly cream with Lupus kernel - it worked fine
z1WV said:
Have you selected locked bootloader option in Aroma installer? I tried Zelly cream with Lupus kernel - it worked fine
Click to expand...
Click to collapse
Yes i've selected it. And it still doesn't work. Any help? I really want to use that rom so bad.
Did you flash the kernel Included (or recomended) for your rom? because if you are stuck at a sony logo it seems to me that you still have stock kernel.
Edit: it seems that you have just hot boot the first kernel with recovery so when you boot again it just revert to stock Kernel.
That would explain why you can't access to recovery the second time.
You need to really flash the kernel:
1. Turn your phone off
2. Plus the usb Cable in While pressing volume up.
3. "fastboot flash boot boot.img" If you use fastboot in command line or "Select Kernel to Flash" button if you use fastboot in Flashtool.
Edit2: Ok I just realised that you have Locked bootloader so what i just told you won't work. Sorry.
Did you really follow step 10 and 11 and chose "reboot to system"?
The only thing I can think of would be to unlock your bootloader using mihahn thread http://forum.xda-developers.com/showthread.php?t=1879750 and then install a custom kernel.
tym0 said:
Did you flash the kernel Included (or recomended) for your rom? because if you are stuck at a sony logo it seems to me that you still have stock kernel.
Edit: it seems that you have just hot boot the first kernel with recovery so when you boot again it just revert to stock Kernel.
That would explain why you can't access to recovery the second time.
You need to really flash the kernel:
1. Turn your phone off
2. Plus the usb Cable in While pressing volume up.
3. "fastboot flash boot boot.img" If you use fastboot in command line or "Select Kernel to Flash" button if you use fastboot in Flashtool.
Edit2: Ok I just realised that you have Locked bootloader so what i just told you won't work. Sorry.
Did you really follow step 10 and 11 and chose "reboot to system"?
The only thing I can think of would be to unlock your bootloader using mihahn thread http://forum.xda-developers.com/showthread.php?t=1879750 and then install a custom kernel.
Click to expand...
Click to collapse
Thanks for the reply bro, yeah but it is said in the rom that it works with stock kernel. I dont want to unlock my bootloader maybe i'll brick my phone and i don't know how to fix that. I'm pretty sure that i've followed every steps given by the dev but still the same thing happened. Now, i tried to flash the stock kernel and root again and install cwm again then i tried to flash the custom rom via cwm and followed every steps then reboot. And still it wont go through the sony logo. really need help guys!
Zedfailon said:
Thanks for the reply bro, yeah but it is said in the rom that it works with stock kernel. I dont want to unlock my bootloader maybe i'll brick my phone and i don't know how to fix that. I'm pretty sure that i've followed every steps given by the dev but still the same thing happened. Now, i tried to flash the stock kernel and root again and install cwm again then i tried to flash the custom rom via cwm and followed every steps then reboot. And still it wont go through the sony logo. really need help guys!
Click to expand...
Click to collapse
When you have 10 posts you may ask in the dev thread, maybe there's a little step we all missed and so it's not working
Sent from my SK17i running stock ics (.587)
mihahn said:
When you have 10 posts you may ask in the dev thread, maybe there's a little step we all missed and so it's not working
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
yeah i've never seen a feedback from people that's using the zelly cream rom with a stock kernel, maybe the problem is with the stock kernel. Now i'll try some other custom roms out there maybe they'll work with the stock kernel and a locked bootloader.
Thanks for the support guys!
BTW superRiyaz, mihahn,z1WV,tym0
Hey guys! i've made the rom working for my xperia mini! all i did is install again and follow again the instructions! i don't why the third time i tried to install this rom is working! I did all the same steps again and im shocked that it go through the sony logo!
anyways thanks for cooperating guys! you got my thanks! i'm done with my problem!
Edit: Sorry didn't see the above post. Happy you solved your problem.
tym0 said:
Edit: Sorry didn't see the above post. Happy you solved your problem.
Click to expand...
Click to collapse
yeah thanks anyway
mihahn said:
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Hi, the first time i tried this i only wiped data/factory reset and nothing else, so when i rebooted from recovery mode i got stuck at sony logo. Took me some time to fix everything (flash stock ICS on device, root phone and install cwm again).
Now i did all this:
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Now when i rebooted from CWM (recovery mode) the sony logo appears for about 10 sec, than disappears for about 5-10 sec, and it's doing this over and over again for about 10min now.
Any ideas ?
ur000s said:
Hi, the first time i tried this i only wiped data/factory reset and nothing else, so when i rebooted from recovery mode i got stuck at sony logo. Took me some time to fix everything (flash stock ICS on device, root phone and install cwm again).
Now i did all this:
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Now when i rebooted from CWM (recovery mode) the sony logo appears for about 10 sec, than disappears for about 5-10 sec, and it's doing this over and over again for about 10min now.
Any ideas ?
Click to expand...
Click to collapse
Which phone are you using?
Sent from my Nexus 4 running Android 4.3
mihahn said:
Which phone are you using?
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
SE wt19i
ur000s said:
SE wt19i
Click to expand...
Click to collapse
Why did you flash the active user home button fix? It's for Xperia active st17 users! I guess that's the problem
Reinstall the rom like you did before and don't flash the active fix! It should work fine
Sent from my Nexus 4 running Android 4.3
mihahn said:
Why did you flash the active user home button fix? It's for Xperia active st17 users! I guess that's the problem
Reinstall the rom like you did before and don't flash the active fix! It should work fine
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
I actually didn't do that, because when i reboot from CWM (after installing rom) that's where the sony logo flashes in about 10s intervals.
unable to install custom rom
Hi guys..Currently I'm using "Sony Ericsson Xperia Mini Pro".I have rooted my phone by "Flash Tool" for Sony, I also unlocked my bootlocker too that time.
After the rooting process has been finished I have installed "ROM manager" from Play Store. Then I install "CWM v5.0.2.7" via ROM manager. But the whole problem is that now i can't istall custom ROM for my device. Because in the CWM recovey menu it is showing "Xperia Arc[v03] {ICS}".
I am able too wipe factory data, cache and delvik cache, it is also showing installation process of custom rom.After the installation process completed, my phone is not booting into Custom Rom. Its repeatedly showing sony icon, then it is automatically rebooting. I took back up for my phone also,and I can also recover from that.Also I tried "X-parts" app from play store, and installed cwm for xperia 2011 series. But the same "Xperia Arc" is showing till now.
note: I followed all the steps[/B]

[Q] cannot install custom roms

i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
Which rom did you try to flash and on which firmware were you on? Also what wipes did you do in CWM?
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
umesh840 said:
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
Click to expand...
Click to collapse
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
you have unlocked your bootloader as well....right??
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
2
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
2 suggestions
1. try another recovery if u prefer cwm install another version
2.format
/system
/data
/cache
see what happens then
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
umesh840 said:
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
Click to expand...
Click to collapse
I think Everything will work fine..
Just follow these steps...
In CWM Recovery
Go to Mounts & storage > Wipe cache , wipe data & wipe System
Then Go to Advanced > Wipe Dalvik-cache
and now install your Rom from Sd card
I hope this 'll work..:good:

Categories

Resources