Hi,
I tried to flas MiniCM7_Pro_V18.zip with clockwordmod and once I restarted, it said corrupted ROM.
Now when I restarted my phone it is stuck at SE logo page.
Please help
-Factory reset
-wipe cache
-wipe dalvink
Boot into recovery (click the 'back' button when booting). Reinstall the rom (try a previous or alternative version), repeat the process described above (backup + factory reset), and reboot twice, you are good to go, no worries.
I had clockwordmod installed, however while flashing the new ROM, that went off.
Now I am unable to go back into recovery by pressing back button, cannot do a factory reset, its just struck at SE loga
The ROM installed was a bad one...
sandebal said:
I had clockwordmod installed, however while flashing the new ROM, that went off.
Now I am unable to go back into recovery by pressing back button, cannot do a factory reset, its just struck at SE loga
The ROM installed was a bad one...
Click to expand...
Click to collapse
Just a corrupted download, miniCM7 works fine.
To unbrick your phone, use SEUS. Reinstall your SE stock rom and start teh proccess again: root your phone, instal CWM again, download a new rom and flash it.
I hope that helped. I know there is a tut here in xda bout this proccess but I just coudn't find it.
Thanks nit3wolf
I am again a happy X10 mini pro user. Fantastic help.
Searched the flash tool, ftf for x10 min pro stock and done.
My first time helping anyone here, I'm happy I was usefull!
You're always welcome, bro.
Cheers!
Related
Hello, i have a big problem with my phone, the phone stuck at SE logo, if remove battery and restart again the phone maybe start normal, but the problem is that i flash phone with original rom and the problem is same, i update at lastest firmware... is time when have a lot of error and phone restart and stuck or start long time. Who can help me? sorry for my enghish
diniulian said:
Hello, i have a big problem with my phone, the phone stuck at SE logo, if remove battery and restart again the phone maybe start normal, but the problem is that i flash phone with original rom and the problem is same, i update at lastest firmware... is time when have a lot of error and phone restart and stuck or start long time. Who can help me? sorry for my enghish
Click to expand...
Click to collapse
Flash again with SE Update Service
@diniulian
dont panic when something goes wrong. Do a full update using SE update service, and then try if it boots well. post results
Tommylee567 said:
@diniulian
dont panic when something goes wrong. Do a full update using SE update service, and then try if it boots well. post results
Click to expand...
Click to collapse
THX for reply
can help me with a link to download , i search on google but i can't find the SE update service, the links with seus redirect me to sonyericsson.com to download pc companion.
I succeed to find SE update service, i installed and i made a full update, but the problem is same, stuck at SE logo... . It's posible to be a hardware problem? All that problems was apper after instal a custom rom (GingerDx pro v15). now the phone stuck at se logo. Another solution ? pls hlp
im sorry as i dont know what to reply. i guess the devs may have an idea.
if you tell the probably tell the steps exactly what you did, someone else can help you with this.
THX for your answer
ok, i will tell u step by step :
First a had rooted phone and install a custom rom ( [ROM] 2.1.1.Clean.0.0 ) and i wanted install custom rom GingerDX v15, so i run in xrecovery instal update.zip and after phone stuck at se logo, i remove battery to restart and run again new custom rom but the phone stuck. I flash phone with original rom but the problem remained same, phone stuck at se logo. Is time when phone run normal, but is time when stuck..., and i have a problem with a lot of errors like: "Sorry application nnnn.vvvv.com can't....." Exist a special soft to full hard and soft reset and flash or any solution?
Similar problem....urgent help.plz...
Hi... I rooted and install xrecovery on my xperia x10 mini...in order to install custom rom...i had old buggy firmware 2.0.1 somthing like that ...so I fist have to update my android to 2.1.A etc firmware....but pc companion was not detecting my phone (when switched off) during step u know "connect to usb while holding back button".... But my windows xp n 7 both gave errors of "not recognizing usb".... So I stupiditly went to custom rom and installed the latest custom rom from sdcard(without updating to latest firmware from pc companion)....the custom rom installed successfully.....but phone is stuck on se logo.... Now im not able to go to recovery mode....neither I am able to switch off my phone as power button not working.... X10 mini battery cant be removed .... What should I do now?? Plz help quick .... Plz
diniulian said:
THX for your answer
ok, i will tell u step by step :
First a had rooted phone and install a custom rom ( [ROM] 2.1.1.Clean.0.0 ) and i wanted install custom rom GingerDX v15, so i run in xrecovery instal update.zip and after phone stuck at se logo, i remove battery to restart and run again new custom rom but the phone stuck. I flash phone with original rom but the problem remained same, phone stuck at se logo. Is time when phone run normal, but is time when stuck..., and i have a problem with a lot of errors like: "Sorry application nnnn.vvvv.com can't....." Exist a special soft to full hard and soft reset and flash or any solution?
Click to expand...
Click to collapse
Step to instal custom ROM :
1. copy ROM to sd card
2. boot in CWM or xrecovery (see the ROM instalation requitments)
3. factory reset/full wipe, wipe cache, wipe dalvik cache.
4. instal zip from sd card (chose the ROM)
5. reboot
i think you can't instal GinggerDX v 15 with Xrecovery, you must instal with CWM recovery
---------- Post added at 10:21 AM ---------- Previous post was at 10:00 AM ----------
rang6300 said:
Hi... I rooted and install xrecovery on my xperia x10 mini...in order to install custom rom...i had old buggy firmware 2.0.1 somthing like that ...so I fist have to update my android to 2.1.A etc firmware....but pc companion was not detecting my phone (when switched off) during step u know "connect to usb while holding back button".... But my windows xp n 7 both gave errors of "not recognizing usb".... So I stupiditly went to custom rom and installed the latest custom rom from sdcard(without updating to latest firmware from pc companion)....the custom rom installed successfully.....but phone is stuck on se logo.... Now im not able to go to recovery mode....neither I am able to switch off my phone as power button not working.... X10 mini battery cant be removed .... What should I do now?? Plz help quick .... Plz
Click to expand...
Click to collapse
repair with SE Update Service.
you must have same firmware in ROM requitments before instaled.
stiv8785 said:
Step to instal custom ROM :
1. copy ROM to sd card
2. boot in CWM or xrecovery (see the ROM instalation requitments)
3. factory reset/full wipe, wipe cache, wipe dalvik cache.
4. instal zip from sd card (chose the ROM)
5. reboot
i think you can't instal GinggerDX v 15 with Xrecovery, you must instal with CWM recovery
---------- Post added at 10:21 AM ---------- Previous post was at 10:00 AM ----------
repair with SE Update Service.
you must have same firmware in ROM requitments before instaled.
Click to expand...
Click to collapse
I will try to factory reset/full wipe, wipe cache, wipe dalvik cache, now i can't run in xrecovery, i root the phone, install xrecovery 1.85 and copy the 3 files (busybox, chargemon and xrecovery.tar) to system/bin, restart the phone (with posibility to stuck at se logo) and push back back... and nothing, or stuck at se logo or run normal...
I want to sell but must be repair of this problem, i want to be serious seller.
I'm back with news, i succed to run in xrecovery, i factory reset/full wipe, wipe cache, wipe dalvik cache, problem is same , so i decided to install a custom rom (211Clean00), and i have a surprise with one new error :
E:can't symlink /system/xbin/su
E: failure at line 236: symlink /system/bin/su System:xbin/su
Installation aborded.
diniulian said:
I will try to factory reset/full wipe, wipe cache, wipe dalvik cache, now i can't run in xrecovery, i root the phone, install xrecovery 1.85 and copy the 3 files (busybox, chargemon and xrecovery.tar) to system/bin, restart the phone (with posibility to stuck at se logo) and push back back... and nothing, or stuck at se logo or run normal...
I want to sell but must be repair of this problem, i want to be serious seller.
Click to expand...
Click to collapse
Don,t use xrecovery to install the ROM, most rom now installed with cwm recovery not xrecovery.
here thread to instal cwm recovery http://forum.xda-developers.com/showthread.php?t=1257701
and read carefully the installation instructions in the thread ROM.
---------- Post added at 02:08 AM ---------- Previous post was at 02:05 AM ----------
diniulian said:
I'm back with news, i succed to run in xrecovery, i factory reset/full wipe, wipe cache, wipe dalvik cache, problem is same , so i decided to install a custom rom (211Clean00), and i have a surprise with one new error :
E:can't symlink /system/xbin/su
E: failure at line 236: symlink /system/bin/su System:xbin/su
Installation aborded.
Click to expand...
Click to collapse
Flash with SE Update Service
Hi everyone, i show you my problem, yesterday i was installing the ics leak rom from T-mobile, at first time installation proceding fine, but multimedia apps didn't works, i tryed to re-flash by doing a second flash of update.zip by the recovery, but now the razr didn't start, he show only the logo M, after a black screen. I can go to the Flashboot, recovery the boot option.
I tried the Wipe cache, Wipe Data/Factory reset but nothing working.
I think that reflash via RSDlite or FlashlT with a ICS rom, the leak will solve this problem ?
Can everyone help me with this big problem ?
Thanks
There's an Thread in General section about saving a bricked Device after the Leak. I'm to lazy to post the Link now
Hi,
I have x10 mini pro (u20). I installed successfully minicm10 and it works fine. I am trying to downgrade it back to mincm7.I tried to two different processes (with seus and with flashtools) but both fail:
1. With repair/update with seus.
I follow the instructions. When my phone is in flash mode, seus starts to download but then I get a message saying: "there is no software available for the phone". "sony update engine doe's have software available for the phone".
2. I tried to just to flash nAa kernel 14 or stock kerne but then the phone is hang when the logo apears (nAa or 'sony ericsson') and I connot enter to CWM recovery.
I search for a solution here in the Forum, I read many instructions, but I did not find a solution for this problem. I hope someone here can provide me with the solution. At the moment my phone works well with minicm10.
Thanks in advance
Did you do the uninstall wipes before flashing nAa-14? Format /system /data and /cache in JB recovery before flashing nAa-14
X10man
Sent from my U20i using xda premium
Downgrade from MiniCM10
Hi sason70,
I had a similar problem with my x10 mini pro. When I tried going back to MiniCM7, I tried using Flashtool for nAa 14 kernel. It completed fine, but on reboot, it hung on nAa logo. I tried with nAa 13, nAa 12 kernels, but still got stuck with the logo.
Then I tried a different approach. I re-flashed nAa jb kernel again.
On reboot, I got back to JB (so I knew how to get back to at least a working phone).
On next reboot, I pressed Back hardware button and entered recovery.
Here I did Factory reset, cleared Dalvik cache (didn't know if it was required), formatted /system, /data.
Next I applied the MiniCM7 zip file and the gapps for it from SD card.
I wanted to poweroff, but there is only a reboot option. So I removed the battery after selecting reboot (and when the screen went blank).
Next, I used Flashtool to put nAa 14 kernel.
On reboot this time, it went to first welcome screen.
Of course, I went back and restored a pre-JB backup and got my phone working as before (call log and all).
I hope that helps.
Nandan
sason70 said:
Hi,
I have x10 mini pro (u20). I installed successfully minicm10 and it works fine. I am trying to downgrade it back to mincm7.I tried to two different processes (with seus and with flashtools) but both fail:
1. With repair/update with seus.
I follow the instructions. When my phone is in flash mode, seus starts to download but then I get a message saying: "there is no software available for the phone". "sony update engine doe's have software available for the phone".
2. I tried to just to flash nAa kernel 14 or stock kerne but then the phone is hang when the logo apears (nAa or 'sony ericsson') and I connot enter to CWM recovery.
I search for a solution here in the Forum, I read many instructions, but I did not find a solution for this problem. I hope someone here can provide me with the solution. At the moment my phone works well with minicm10.
Thanks in advance
Click to expand...
Click to collapse
Thank you for the replies. I appreciate it.
I made a factory reset, wipe all data and cache. I flashed nAa 14 and I was able to go the CWM. But I still have problem to install Minicm7: The installation starts fine, but when it reaches to wipings/system stage, the process stops to advance when it is around 80%.
What I am doing wrong now?
sason70 said:
Thank you for the replies. I appreciate it.
I made a factory reset, wipe all data and cache. I flashed nAa 14 and I was able to go the CWM. But I still have problem to install Minicm7: The installation starts fine, but when it reaches to wipings/system stage, the process stops to advance when it is around 80%.
What I am doing wrong now?
Click to expand...
Click to collapse
You need to re-partition the internal storage again to their original sizes.
Boot into CWM - Mounts and Storage and do:
Format /system
Format /data
Format /cache
They got resized with JB and nAa-14 will restore their original sizes again so you can flash MiniCM7
:victory:
Thank you very much.
Now everything is in order (I hope...)
how about the x10 mini? the battery isn't removable...
how to go to the flashmode?
leboxus said:
how about the x10 mini? the battery isn't removable...
how to go to the flashmode?
Click to expand...
Click to collapse
Plug your phone to a computer, strat flashing. It will ask you to get into flashmode. Then, with cable still plugged, do a hard reset by holding shutdown and home (middle) buttons at once. After some time, LED will turn on green and it's in flashmode. If it gets out of flashmode fast, then just do an extra hard reset when it just got into flashmode, i succeeded to repair my e10i this way.
nandanlbhat said:
Hi sason70,
I had a similar problem with my x10 mini pro. When I tried going back to MiniCM7, I tried using Flashtool for nAa 14 kernel. It completed fine, but on reboot, it hung on nAa logo. I tried with nAa 13, nAa 12 kernels, but still got stuck with the logo.
Then I tried a different approach. I re-flashed nAa jb kernel again.
On reboot, I got back to JB (so I knew how to get back to at least a working phone).
On next reboot, I pressed Back hardware button and entered recovery.
Here I did Factory reset, cleared Dalvik cache (didn't know if it was required), formatted /system, /data.
Next I applied the MiniCM7 zip file and the gapps for it from SD card.
I wanted to poweroff, but there is only a reboot option. So I removed the battery after selecting reboot (and when the screen went blank).
Next, I used Flashtool to put nAa 14 kernel.
On reboot this time, it went to first welcome screen.
Of course, I went back and restored a pre-JB backup and got my phone working as before (call log and all).
I hope that helps.
Nandan
Click to expand...
Click to collapse
Thanks dude. that worked like a charm. now got wifi error issues... i guess its just a kernel problem. should work it out soon.
Thanks again.
Hi I have attempted to install experience rom on my xperia U. Firstly i successfully unlocked the boot loader. I then rooted it and installed CWM recovery all still good. I the transferred the ROM image to the phone went into recovery did a wipe data factory reset and wipe cash partition. Also wipe dalvick cache. Selected the ROM and install started, it hung, only way out was battery pull, I went back into recovery same thing happened, finally tried once more and it hung at about 75%. Now phone goes in a loop sony logo to black screen and I cant get into recovery mode. I have searched to see if I can find a way out but not found a way around it yet. I would be very grateful for any help with this.
xs1m0nx said:
Hi I have attempted to install experience rom on my xperia U. Firstly i successfully unlocked the boot loader. I then rooted it and installed CWM recovery all still good. I the transferred the ROM image to the phone went into recovery did a wipe data factory reset and wipe cash partition. Also wipe dalvick cache. Selected the ROM and install started, it hung, only way out was battery pull, I went back into recovery same thing happened, finally tried once more and it hung at about 75%. Now phone goes in a loop sony logo to black screen and I cant get into recovery mode. I have searched to see if I can find a way out but not found a way around it yet. I would be very grateful for any help with this.
Click to expand...
Click to collapse
flash stock ICS Rom ftf with flashtool
Thanks for help
Thanks I managed to flash stock Gingerbread in the end.
In case anyone else has a similar problem here is a handy guide I found. (youtube.com/watch?v=hPPWRXcsz7g)
Where it says connect phone I found you need to connect it in fast boot (hold volume up button as you connect it) when the software is ready to flash un-plug phone then connect in flash mode (hold volume down button as you connect).
xs1m0nx said:
Hi I have attempted to install experience rom on my xperia U. Firstly i successfully unlocked the boot loader. I then rooted it and installed CWM recovery all still good. I the transferred the ROM image to the phone went into recovery did a wipe data factory reset and wipe cash partition. Also wipe dalvick cache. Selected the ROM and install started, it hung, only way out was battery pull, I went back into recovery same thing happened, finally tried once more and it hung at about 75%. Now phone goes in a loop sony logo to black screen and I cant get into recovery mode. I have searched to see if I can find a way out but not found a way around it yet. I would be very grateful for any help with this.
Click to expand...
Click to collapse
Flash stock firmware.
Install fastboot drivers.
Flash SlidingXU in cmd
Try out Zperience or TheBrainsRom following factory data reset, wiping cache and dalvik cache.
I need help.
Yesterday, my little brother pulled the battery of my Xperia Mini Pro (SK17a) while this was factory reset.
Right now, my phone is not been able to turn on. Just stays a long time after the SonyEricsson logo for a few hours. (sometimes fails to start, but only see the notification bar with the time. No menu or anything, everything is in black)
Try to flash it in a thousand ways and I realized I didn´t enter the recovery mode ( turning on pressing a combination of buttons ... I already tried about 13 or 14 with the physical and the tactile buttons next to the button to turn on the phone) but the only thing that I thought would serve not served. The only different answer is when I connect the usb cable to pc to flash it (by pressing the VOLUME- but is useless.
PS: Before I had already rooted and flashed the terminal correctly, but wanted to go back to reset. I've tried everything, but no response. Just not detected by my pc.
(Sorry for the english. This is not my language)
Greetings from Chile!!! ;D
Fix with pc companion go update softwer then repair my phone and folow steps
Sent from my ST15i using xda app-developers app
Tats the Best Way to get back phone normal.. :thumbup:
Sony Xperia J X(
bricked too
Hi,
I had the stock Ice Cream kernel .587 and installed the CWM to flash the Zelly Cream 6.0_Rejuvenated 12.03.14
http://forum.xda-developers.com/showthread.php?t=2155803&highlight=first+boot&page=329
ROM.
My xperia mini was rooted but the bootloader was locked.
The installation of the ROM looked ok but at the first boot it stacked for more than half hour one the SONY logo boot screen.
It doesn't turn off. I removed the battery, and turned it on but it stucks on the same SONY logo boot screen.
I think i can't use flashtool as the bootloader is locked... what can I do? Is there another tool to flash the official ROM or my buck up from CWM?
gvdev said:
Hi,
I had the stock Ice Cream kernel .587 and installed the CWM to flash the Zelly Cream 6.0_Rejuvenated 12.03.14
http://forum.xda-developers.com/showthread.php?t=2155803&highlight=first+boot&page=329
ROM.
My xperia mini was rooted but the bootloader was locked.
The installation of the ROM looked ok but at the first boot it stacked for more than half hour one the SONY logo boot screen.
It doesn't turn off. I removed the battery, and turned it on but it stucks on the same SONY logo boot screen.
I think i can't use flashtool as the bootloader is locked... what can I do? Is there another tool to flash the official ROM or my buck up from CWM?
Click to expand...
Click to collapse
Did you wipe everything the dev told you to? You should be able to boot into android that way. If that fails, flashtool is your friend. Restoring a nandroid backup should do the trick.
..
Pixelado said:
Did you wipe everything the dev told you to? You should be able to boot into android that way. If that fails, flashtool is your friend. Restoring a nandroid backup should do the trick.
Click to expand...
Click to collapse
No I didn't wipe anything... What does wipe mean ? Delete? From SD? From internal storage?
I cann't enter on the intrnal storage, my PC doesnot recognise my phone (it was being recognised before the flashing).
.... Ok I'll try flash tool (you mean the Sony's flashtool)?
gvdev said:
No I didn't wipe anything... What does wipe mean ? Delete? From SD? From internal storage?.... Ok I'll try flash tool.
Click to expand...
Click to collapse
Use flashtool to flash back the stock rom and it'll work again
Yes, there are wipes to do in cwm like doing a factory reset / wiping cache / sometimes you have to wipe the system too. Read and follow the instructions in the rom thread and you should be fine
Sent from my Nexus 4 running Android 4.4
mihahn said:
Use flashtool to flash back the stock rom and it'll work again
Yes, there are wipes to do in cwm like doing a factory reset / wiping cache / sometimes you have to wipe the system too. Read and follow the instructions in the rom thread and you should be fine
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
Ok I managed to flash the stock ROM,
I'll try to reinstall the modded ROM how can I wipe everything that is needed?
Should the wipping be performed before ROM's installation or afterwards?
Thank you for your support!
gvdev said:
Ok I managed to flash the stock ROM,
I'll try to reinstall the modded ROM how can I wipe everything that is needed?
Should the wipping be performed before ROM's installation or afterwards?
Thank you for your support!
Click to expand...
Click to collapse
Wipe it in cwm before you install the rom. But all these instructions should be given in the rom thread, check it out
Sent from my Nexus 4 running Android 4.4