Hi
I have an italian version of Hermes with
ROM: 1.18.258.2
EXTROM 1.18.258.105
Radio 1.03.03.10
I would like to know if i can upgrade the radio packet with the version:
1.20.31.10 (type II)
Thanks & regards, lcs
you will need to unlock the sim and cid on your phone:
http://forum.xda-developers.com/showthread.php?t=282073
then you will also need to downgrade your bootloader:
http://forum.xda-developers.com/showthread.php?t=284401
then you can flash that different radio
just check your bootloader version, it must be 1.04 to be able to do a radio-upgrade only.
No need to SIM/CID unlock, bootloader 1.04 is the only requirement.
Can anyone tells the difference between different version of radio rom?
http://rapidshare.com/files/1389803...d_Raphael_CRC_52.33.25.17_1.02.25.19_Ship.exe
Enjoy!
hi,
quick question
i have just got my touch pro
1.90.401.1 wwe UK verison
can i use ur rom
and how do i install it
thanks
I'm no sure that you can flash it...but try maybe in will works,anyway wait HardSPL and you will flash any rom which you want
401 is not the UK WWE version.
All genuine UK devices should have 405.1 on them.
I think 401 is either the East European English, or the EU English. But if you have that one on there, you shouldn't be able to use this one without the HardSPL installed.
If the CID matches then you should be able to flash this to an EU or a UK Touch pro without problems.
I aint at home to download this yet, but somebody could easily let us know which CID it is built for?
ROM Information extracted with Yang:
For Raphael_HTC_WWE_1.90.405.1_Radio_Signed_Raphael_CR C_52.33.25.17_1.02.25.19_Ship:
Device: RAPH10000
CID: HTC__001
Version: 1.90.405.1
Language: USA
For RUU_Raphael_hTC_Asia_WWE_1.90.707.1_Radio_Signed_Raphael_CRC_52.33.25.17_1.02.25.19_Test:
Device: RAPH10000
CID: HTC__023
Version: 1.90.707.1
Language: USA
RUU_Raphael_HTC_WWE_1.66.405.1_Radio_Signed_Raphael_52.33.25.17_1.02.25.11_Ship:
Device: RAPH10000
CID: HTC__001
Version: 1.66.405.1
Language: USA
Looks like only the Asian ROM is for a Raphael with a different CID:
I have a WWE Raphael bought in the Netherlands which has the same version ROM on it, so I expect its CID is HTC_001, I will test it later.
darkvoid said:
ROM Information extracted with Yang:
For Raphael_HTC_WWE_1.90.405.1_Radio_Signed_Raphael_CR C_52.33.25.17_1.02.25.19_Ship:
Device: RAPH10000
CID: HTC__001
Version: 1.90.405.1
Language: USA
For RUU_Raphael_hTC_Asia_WWE_1.90.707.1_Radio_Signed_Raphael_CRC_52.33.25.17_1.02.25.19_Test:
Device: RAPH10000
CID: HTC__023
Version: 1.90.707.1
Language: USA
RUU_Raphael_HTC_WWE_1.66.405.1_Radio_Signed_Raphael_52.33.25.17_1.02.25.11_Ship:
Device: RAPH10000
CID: HTC__001
Version: 1.66.405.1
Language: USA
Looks like only the Asian ROM is for a Raphael with a different CID:
I have a WWE Raphael bought in the Netherlands which has the same version ROM on it, so I expect its CID is HTC_001, I will test it later.
Click to expand...
Click to collapse
Yep most likely due to some of the keyboard differences etc...but its generally just to make sure localised ROMs are flashed to the intended device. Compatability should be 100% and just the keyboard may behave slightly different (AZERTY, QWERTY, QWERTZ etc...). Naturally a rebuild for HTC__001 or HardSPL would be needed for it to flash successfully (dont hold me to that, quite confident thats what the deal is though).
Ive updated the info in the wiki to reflect this, good work.
raronni said:
hi,
quick question
i have just got my touch pro
1.90.401.1 wwe UK verison
can i use ur rom
and how do i install it
thanks
Click to expand...
Click to collapse
I have this version as well. Is this rom attached to this thread newer?
Thanks
I tried flashing this into my Raphael which currently runs 1.90.401.1.
It goes all the way to the tri-color screen and the percentage bar.
But as soon as it hits 1% it gives the update utility gives the message "ERROR [294]: INVALID VENDER ID" (Typo included), and quits.
Is this CID related? Because the CID between 1.90.401.1 and 1.90.405.1 should be identical.
(Unless I have a 1.90.401.1 with a different CID).
darkvoid said:
I tried flashing this into my Raphael which currently runs 1.90.401.1.
It goes all the way to the tri-color screen and the percentage bar.
But as soon as it hits 1% it gives the update utility gives the message "ERROR [294]: INVALID VENDER ID" (Typo included), and quits.
Is this CID related? Because the CID between 1.90.401.1 and 1.90.405.1 should be identical.
(Unless I have a 1.90.401.1 with a different CID).
Click to expand...
Click to collapse
You havent told us which model your device is, and also where it is from?!? Although i suspect the CID for the UK and EU models SHOULD be the same, UK is part of the EU technically so it shouldnt matter. There MAY be differences elsewhere though. The ROM might be built for SuperCID, you might need to double check with an nbh util....from what ive been told a SuperCID ROM will now NOT flash to a device which has a carrier CID now, this was not the case with earlier devices, like a multi-region DVD not working on a region-locked player?!
On the Identity tab of Device Information it does say its a "HTC Touch Pro T7272", I wonder how that's different from "HTC Touch Pro".
Ordered it the phone which is a WWE edition from a Dutch website and using it in the Netherlands obviously.
i cannot flash it either , same cid error and also have HTC Touch Pro T7272
I just know that mines factory unlocked, no carrier behind it.
Ok, using mtty to execute a "info 2" on the bootloader it seems that my HTC Phone has a CID of HTC__032, which would be why I cannot flash this ROM.
I have yet to see any ROMs for the HTC__032 CID.
no worries about CID. hardspl is out in about 10 mins
Hey guys, i`m new here... I read the thread, but still, i`m not sure if this is the right rom for me. Mine HTC is 1.90.478.2 NLD... I just want to make it with English language. So, can i use this ROM ?
Problem after flashing Raphael ROM
Hello guys, please give em a hand here.
Picked up a new Touch Pro last week. It was originally O2 so had been unlocked & flashed with both HardSPL 1.90 & RUU ROM version: 1.66.405.1 WWE
RoM Date: 07/14/08
Radio Version: 1.02.25.11
Protocol Version: 52.33.25.17U to change to English. Opera browser & Remote Desktop Mibile were missing.
I tried upgrading with:
ROM version: 1.90.405.1 WWE
Radio Version: 1.02.25.19
Protocol Version: 52.33.25.17U.
ROM flashing went well, but on TP reboot & customization, the progress bar would not get past the Opera 9 installation.
I have soft reset & then hard reset & still get same problem. The TP is still missing Opera browser & Remote desktop.
Has anyone experienced this or hav an idea what the problem is? Could it be a problem caused by the Hard SPL?
Hello Cyborg,
Where did you get(downloaded this rom) this?:
ROM version: 1.90.405.1 WWE
Radio Version: 1.02.25.19
Protocol Version: 52.33.25.17U.
can anyone tell me the who is the newer rom and what build have?
thanks
was this post started by the same football that created the dell axim x51v 6.1 roms? if so thank you your rom made me keep my axim
Cyborg 02 said:
Problem after flashing Raphael ROM
Hello guys, please give em a hand here.
Picked up a new Touch Pro last week. It was originally O2 so had been unlocked & flashed with both HardSPL 1.90 & RUU ROM version: 1.66.405.1 WWE
RoM Date: 07/14/08
Radio Version: 1.02.25.11
Protocol Version: 52.33.25.17U to change to English. Opera browser & Remote Desktop Mibile were missing.
I tried upgrading with:
ROM version: 1.90.405.1 WWE
Radio Version: 1.02.25.19
Protocol Version: 52.33.25.17U.
ROM flashing went well, but on TP reboot & customization, the progress bar would not get past the Opera 9 installation.
I have soft reset & then hard reset & still get same problem. The TP is still missing Opera browser & Remote desktop.
Has anyone experienced this or hav an idea what the problem is? Could it be a problem caused by the Hard SPL?
Click to expand...
Click to collapse
Hi,
I have also got the o2 version of the Touch Pro and reflashed it using this ROM. The flash completes fine and the phone reboots. I hard reset the device as soon as the flash completed and the phone wanted setting up.
I've now gone through the setup and the phone is installing the software but it has appeared to stop at the Opera9 installation.
The phone is currently sat saying 'Installing WM6_PPC_HTC_Opera9_WWE.CA (Looks like the B is at the end but runs off the screen lol)
I downloaded the ROM from this thread, ran the HardSPL to allow flashing and then just ran the exe file that I downloaded from here.
I've left it now for about 10mins and it hasnt moved, going to soft reset it and see what its doing, then try installin Opera 9 from a seperate CAB.
If anyone can help I would appreciate it alot!
Thanks in advance,
M_Taylor40
Hi guys , i'm a newbie . My radio version is : 1.16.00.00 , i want upgrade but don't know which rom is good for me . My bootloader is :
HERM200 IPL-1.01
HERM200
SPL-1.40.0lipro
Which radio roms i should choose ?
Upgrade to Hard SPL V7 first..... What you have is an older, unsafe version. Before flashing a radio rom you HAVE to upgrade so your SPL is 2.10 oli...
Also, the info you have given is useless... Radio roms are area and carrier specific.
Where are you and who's your carrier? You might receive an answer then....
Hello, picking up on an already open radio thread, does anybody know which is a good radio for Argentina (South America), carrier Personal?
Thanks!
Hi, I have purchased a Softbank X01HTC 3G model pn 14-Aug-07 from Japan. It is locked by the software carrier. Please let me know the exact procedure how to unlock it to use other subscribers SIM card or use it in other countries. I have installed English OS (windows 5) and the details of the hardware are as below. Please suggest or send the unlock zip
model no: Herm200
Platform: pocket PC
ROM Version : 2.06.502.3
ROM date:02/02/07
radio version: 1.14.01.10
protocol: 32.50.7018.00H
SPL-1.09
Purchased on- 14-Aug-2007, from Japan
Thanks in advance for all information provided for this.
[email protected]
Hi Guys,
I have reviewed the forums looking for a solution to debrand and flash stock rom with 2.5 bootloader. Can anyone point me to the right direction?
I have tried DFT spl put get "invalid vendor ID.
From what I understand I can not use goldcard as my bootloader is 4.x
my phone is
HTC Titan (vodafone)
Carrier (unlocked)
OS version: 7.10.8773.98
Firmware revision number 1750.0602.40603.165
Hardware revision number:0002
Radio software version 17.5006.08.27_17.08.50.06U
Bootloader version: 4.6.175006.2(140733)
any help greatly appreciated. My HD2 @Dynamics HD2O 2.00 WP7.8 8858 is putting my titan to shame.
Your Titan is branded, even though it's carrier unlocked, it still carries a brand like ATT.
Firmware revision number 1750.0602.40603.165
That bit right there, the last 3 digits, usually shows the characteristic value of the phone on which network and region it is tied to.
Only phones with 401 (usually) are unlocked phones which do not carry and network branding in them.
Your luck is very slim, if you can find a matching Vodafone EU ROM with a bootloader version of at least below 2.05 / 2.5 (same thing) then there's a possibility of HSPL.
Success
Update.
It is possible.
I successfully downgraded SPL to 2.5. I created goldcard using nbh file in DFT SPL205 file then flashed HSPL.. Titan now running Dynamics 2.0.
rowlie50 said:
Update.
It is possible.
I successfully downgraded SPL to 2.5. I created goldcard using nbh file in DFT SPL205 file then flashed HSPL.. Titan now running Dynamics 2.0.
Click to expand...
Click to collapse
How did you unlock? Could you give me some guidance?
the titan of a friend is in semi-brick and I would try to install a custom rom to restart it.. But I can not proceed with the downgrade bootloader
marcoar said:
How did you unlock? Could you give me some guidance?
the titan of a friend is in semi-brick and I would try to install a custom rom to restart it.. But I can not proceed with the downgrade bootloader
Click to expand...
Click to collapse
Same question here... Trying to HSPL my ATT Titan with no luck for a long time...