Related
I sold my 3D to someone and have been trying to put a new rom on it for em. Everytime I flash a 2.3.4 rom everything works EXCEPT during a call you can hear the person talking but they cant hear you. And I know the speaker works because voice commands work fine but during it call it doesn't work, period.
Sounds Like a personal phone issue..I've been on 2.3.4 with multiple roms and never had this issue.
Sent from a little place called ETERNITY in the 3rd Dimension.
I never had that problem running 2.3.4 ROMs either.
I honestly don't get it. Every 2.3.4 rom I tried to put on the phone would have the issue with not being able to be heard during a call. I tried 4 different roms and had the same issue everytime. Put a 2.3.3. rom on it and I could be heard during calls fine. I dunno but I got tired of fooling with it.
I did notice one thing though... when wiping in recovery I got an error that said
E:can't give path "/sdcard/.android_secure" to format_volume
Think that might have something to do with it?
OP, did you do the EVRC-B mod? If so, undo it.
Compusmurf said:
OP, did you do the EVRC-B mod? If so, undo it.
Click to expand...
Click to collapse
I don't even know what that is lol. This is basically the scenario. I can flash ANY 2.3.3 rom or lower than that and everything works perfectly fine. But as soon as I flash any rom with a 2.3.4. base everything works except for callers being able to hear me. It's crazy... I even tried the stock 2.3.4. deodexed update and it was the same thing. Flash a 2.3.3. rom and boom, they can hear me again.
brownhornet said:
I don't even know what that is lol. This is basically the scenario. I can flash ANY 2.3.3 rom or lower than that and everything works perfectly fine. But as soon as I flash any rom with a 2.3.4. base everything works except for callers being able to hear me. It's crazy... I even tried the stock 2.3.4. deodexed update and it was the same thing. Flash a 2.3.3. rom and boom, they can hear me again.
Click to expand...
Click to collapse
The EVRC-B mod enhances voice, the same settings found on Verizon phones but in some cases it might not be supported by the tower. Its accessed in the EPST edit menu, via your MSL code.
But if you're flashing the ROMs with voice performance changing, I'm not sure whats going on. As I seriously doubt the EPST settings get changed by the ROM.
I could be wrong.
I don't know either... im clueless. First time i've ever had a hangup like this when flashing. I put it on the phone for her and everything was all good until she got a call and realized they couldn't hear what she was saying. I thought maybe it was a bad flash but hell i've tried every rom in the development forum almost.
none
Give the guy his money back, put it under your car tire, then smoke the tires, that phone sounds retarded.
Try revolution by Mike and see if that shows the same issue.
If it does then either your doing something wired while flashing, have some app messing crap up, or its hardware problem somehow.
Likely its user error somehow though. I dunno any roms that flip evrb on for voice by default for the mere fact that its not supported everywhere.
Sent from my PG86100 using XDA App
But how would it be user error only for the 2.3.4. roms lol. Im sayin... i'm not doing anything different. Just download, transfer from pc to sd and flash through recovery like I always have. If it was user error it seems like id have problems with the 2.3.3. roms too. I gave up on it though.. technically it's not even my phone anymore lol
Guys I really need some help pls! I'm not new to androids and have pretty decent knowledge of flashing and the general consensus on how androids work. However this is my first sgs2 phone trying to install galnet miui. I have failed consistently, as I have probably done 20 full wipes and installs of this rom and just can't get it right. I don't know where else to look and ask. I really like this rom and here are my problems. Everything installs just fine. Boots up fine. I just cannot make any phone calls!! I can rcv calls but when I answer it they cannot hear me. I've tried everything from different kernels to every different way of installing. I tried flashing the radios but it'll give me an error when I try to flash. When I flash a new radio with the miui.us fom it works fine. Also the 4 buttons on the phone only the home button and menu button seem to work. I cannot use the back button and search button. Are these purposely disabled? Please guys I'm begging you haha it's so damn annoying. I've posted on the galnet forums and it's dead over there. So if anyone can give me some insight. By the way I'm coming from an atrix 4g that was running oc/uv kernel at 1.4 ghz and cm7 and the sgs2 is just miles ahead! Thanks again guys (for listening to my whining in) advance.
By the way am i downloading the correct version of the rom? On their website I'm downloading sgs2 i900. I don't see anything else for our I777. I figured this would work as I saw the locked thread in here for the galnet rom.
This is the I9100 forum, you're in the wrong place and probably flashing stuff for the wrong device.
Is anyone else having issues with the other party hearing you in call? I have a case, and no matter if I have it on or off, the other party can't hear me unless I talk louder than normal. I don't recall having to talk that loud on my iPhone to be heard. Was happening on CM7 and latest UnNamedROM.
I've encountered the same issue. I've been running unnamed since the day I got my phone, and am ocrrently on 2.2.1. I've read of others having this issue as well. I've also read somewhere that disabling the noise canceling feature supposedly helps. I've done so, but not sure if or how much it helps, as I can't hear myself from the other end. Perhaps someone else can chime in with advice regarding this topic.
So I was doing some more tests. It seems I might be holding the phone away from my face when I speak in an effort to not get face grease on the screen. Will have to do more testing to verify.
Sent from my SAMSUNG-SGH-I777 using XDA App
I too have this issue whenever I use the UCKK6 modem after the OTA update. Whenever I was on the UCKH7 firmware + modem, I had no problems and when I use the UCKK6 firmware + UCKH7 modem, I also don't have problems.
When using the UCKK6 modem though, I get a LOT of people complaining that they can't hear me and will sometimes even hang up on me because they think my call dropped (I'm still there though and can hear them perfectly).
It sounds like your mouth is being muffled or like you are underwater- or like you are randomly teleporting yourself across the room, while leaving your phone in one place.
I have done several tests myself by calling my house phone with my cell and putting the house phone on mute (to prevent echo). I then hold both phones to each ear and basically talk to myself. One test even involves me saying the alphabet. I have done these tests several times using both modems.
My tests gave me the conclusion that the K6 modem is buggy, but is especially unusable with the noise suppression turned on. When on, certain syllables seem to get cancelled out by the noise suppression, as though it thinks that part of it is background noise. However, even with the noise suppression off, I still get the occassional fading of my voice, but it is extremely occassional compared to when the noise suppression feature is on, where it is almost every couple words or so.
With the H7 modem, I notice no problems whatsoever, whether the noise suppression is on or off.
So, I recommend doing one of the following if you are experiencing these issues:
1) Revert completely back to UCKH7 firmware and modem if you want/need the noise suppression.
2) Use the UCKK6 firmware with the UCKH7 modem if you want/need the noise suppression.
3) Continue using UCKK6 firmware and modem, but turn the noise suppression off.
1 and 2 are sure fire ways to not have any issues at all. 3 may still give you problems, but it may happen once every few minutes with noise suppression off (still there, but not nearly as noticeable), while once every couple syllables with the feature on (very freaking noticeable!).
Sent from my SAMSUNG-SGH-I777 using XDA App
So I started having this issue a couple days ago.
I've tried going back to the KH7 modem and still not working. I even tried restoring to stock.
Mic works fine in speakerphone mode, but I get absolutely no sound otherwise (I can shout into the phone and the other side hears nothing). Noise suppression toggle doesn't do anything.
Thoughts?
I guess I'll try taking the phone into ATT this weekend.
^
That sounds like hardware issues, so yeah, bring it back to ATT.
Sent from my SAMSUNG-SGH-I777 using XDA App
dragon_99 said:
So I started having this issue a couple days ago.
I've tried going back to the KH7 modem and still not working. I even tried restoring to stock.
Mic works fine in speakerphone mode, but I get absolutely no sound otherwise (I can shout into the phone and the other side hears nothing). Noise suppression toggle doesn't do anything.
Thoughts?
I guess I'll try taking the phone into ATT this weekend.
Click to expand...
Click to collapse
If it works fine in speakerphone mode that means it isn't a hardware problem -_-
Try this. Open up your phone and...
Type this in: *#*#197328640#*#*
Click on [5] AUDIO
Click on [8] AUDIENCE SETTING
Click on [2] AUDIENCE DISABLE
then try out a test call and see if it works
Problem with mic and in call volume too low
shishir95 said:
If it works fine in speakerphone mode that means it isn't a hardware problem -_-
Try this. Open up your phone and...
Type this in: *#*#197328640#*#*
Click on [5] AUDIO
Click on [8] AUDIENCE SETTING
Click on [2] AUDIENCE DISABLE
then try out a test call and see if it works
Click to expand...
Click to collapse
The above code does not work on AT&T version, I guess. At least it did not work for me. Don't know if root makes any difference, yes I can have booster apps. But again people have reported that this does not seem to work.
I happen to read in International s2 forum that opening the phone and making a bigger hole for mic helps. Or even cutting a slice of the white protective casing around the lower micophone seems to help as well. I did not want to tamper with hardware at the moment, as I am just 10 days past my warranty period.
Let me know if someone knows some funky codes to get this fixed. I am running 2.3.4 stock ROM and not rooted yet.
- Thanks
androidarena said:
The above code does not work on AT&T version, I guess. At least it did not work for me. Don't know if root makes any difference, yes I can have booster apps. But again people have reported that this does not seem to work.
I happen to read in International s2 forum that opening the phone and making a bigger hole for mic helps. Or even cutting a slice of the white protective casing around the lower micophone seems to help as well. I did not want to tamper with hardware at the moment, as I am just 10 days past my warranty period.
Let me know if someone knows some funky codes to get this fixed. I am running 2.3.4 stock ROM and not rooted yet.
- Thanks
Click to expand...
Click to collapse
I'm on AT&T and the code worked for me, however I'm still having the issue. I don't necessarily think messing with the hardware by cutting or slicing will fix it because (for me at least) the problem is intermittent. Sometimes I'll go afew days without the problem, then I can have 3 calls back to back where the person doesn't hear me at all. It can happen both when I initiate the call or answer and it doesn't always happen in the same point of the call. This is pretty frustrating, I really hope there's a fix because I don't want to have to convert to stock and deal with AT&T.
I had this issue. Mine was not intermittent, the mic just stopped working. No amount of flashing or resets from ATT could make it work again.
Strangely enough the speakerphone worked fine and that just screams software issue, but AT&T chose to replace my hardware.
The problem seems to be intermittent for me too.... I don't know how the code works for Griffon23, as AT&T has disabled that on our model. I have not updated to 2.3.6 as the firmware ushers in loads of problems.
I really hope there is a fix, I am just being lazy to flash new roms and stuff, as I might have to return this piece of S#$#t due the low volume and poor mic. Such a shame that expensive phone like this has issues with basic functionality, voice calls.
I also tried good in ear headphones, that solves the problem of low in call volume but not microphone, which simply points that there is some internal problem. May be hardware or may br firmware. And May be ICS update can fix this for us. Fingers crossed.
Thank you Samsung!
spexwood said:
I too have this issue whenever I use the UCKK6 modem after the OTA update. Whenever I was on the UCKH7 firmware + modem, I had no problems and when I use the UCKK6 firmware + UCKH7 modem, I also don't have problems.
When using the UCKK6 modem though, I get a LOT of people complaining that they can't hear me and will sometimes even hang up on me because they think my call dropped (I'm still there though and can hear them perfectly).
It sounds like your mouth is being muffled or like you are underwater- or like you are randomly teleporting yourself across the room, while leaving your phone in one place.
Click to expand...
Click to collapse
THIS. I was having a similar problem a while back. People were telling me that my voice was cutting in and out a lot. Not even looking for it, I found this thread and flashed the UCKH7 modem. I also read somewhere that it helps battery life too as that's what I was searching for.
Anyway, It's now been several weeks now and I had forgotten about the problem until I saw this thread again. I guess I'd have to say that the UCKH7 modem definitely solved my problems as I can't remember the last time someone complained about my voice cutting in and out.
Since this is the only thread similarly related to my issue, I'll continue this one instead of starting a new one. So I've tried the above listed suggestions and the dial code for the audio does not work for me, as a matter of fact, none of the dial codes work for my phone, I get a "Invalid MMI code or no connection" error. I Have not been able to make a call on speakerphone since I flashed my phone for the first time back when I first got it. I've switched around from different ROMs and I get the same issue. The main issue is that no one can hear me when I'm on speakerphone, but I can hear them. I can make regular calls just fine. I've even flashed back to stock and the issue still persists. Are there any suggestions? I am currently on the latest AOKP build of ICS.
If you've been flashing different ICS roms, there's a chance you flashed one of the mic-swapped kernels. Try the AOSP/AOKP version of NEAK. Make sure to wipe cache and dalvik before flashing.
EDIT: Didn't read your post closely enough, if regular calls work, the kernel shouldn't be the problem. Maybe the modem? UCKH7 is what most people report with good results, depending on area.
Have you ever been able to use the speakerphone? Do you know for certain that it works?
AoN
Sent from my SAMSUNG-SGH-I777 using XDA
I just came across this thread after a long time. I was surprised to see how much it has grown!p and how many people haod similar issues as me!
Well, I kind of wanted to give an update and suggestion for those who still have issues.
First my update. Since having these issues in UCKK6 and ICS leaks, I actually gave up on ATT's firmware and moved on to custom ROMs. Currently- and loving it- I'm on a ROM called Mystic's Pride (will be going to Mystic's Glory, a more advanced version- once it is out of Beta testing). Mystic's ROMs are ported firmwares from the international SGS2, but they use the latest ATT modems since the international version's will not work on our phones.
Using a custom ROM will NOT fix the call quality issue. That is all linked to the modem.
Now the suggestions. While running UCKK6, I discovered that you could use the UCKH7 modem with it. So for a while (until I noticed excess battery drain issues), i was using the UCKK6 firmware with the UCKH7 modem.
NO MATTER WHAT VERSION FIRMWARE YOU ARE USING (Gingerbread OR ICS), YOU CAN USE THE UCKH7 MODEM!
As I stated in my update, I am running a custom ROM now, which is Android 4.0.4. Im still using the UCKH7 modem and my calls are super clear and I am not having any issues with people hearing me.
You may be asking, "If you are now on ICS, then why not just use the latest ATT ICS modem?" The answer is simply that after all of my experiences with horrible call quality using official ATT modems, I simply do not trust them anymore. I know of one modem that works, so I have stuck with it without issues. I plan to test out the newest ICS modem though... just to see how it compares with UCKH7. If no good, then its back to KH7.
So, if you are still having issues, then try flashing the UCKH7 modem to your phone. You do not need to be rooted in order to do this. All you need is Odin and to boot into Download mode.
If you flashed the KH7 modem and still having issues, then you most likely have a hardware problem.
Another thing I noticed while still using UCKK6 with its corresponding modem is that by turning off the Noise Suppression, you can get better quality calls. However, using UCKH7 modem may make your calls clearer, but will allow you to use Noise Suppression.
I hope this helps somewhat. I have NOT sent my phones in for repairs/replacement for this issue and my calls are just as clear as the day I bought my phone.
Ill try to pop in here to answer questions, etc if needed.
Sent from my A500 using xda app-developers app
Lol spexwood, I know you're trying to be helpful, but I gotta let you know your post is way old news. It's been common knowledge for a long time that you can flash any ATT I777 modem with any firmware, using ClockworkMod Recovery. It is useful (to me at least, didn't know this before) to know you can also use Odin to flash modems if you don't have CWM, but most I777 users around here have it because they use custom kernels and ROMs. There's a whole thread which contains every single modem in CWM-flashable zips, and it also contains a Google map with notes about which modems users have reported working best for them in their respective locations; this might be helpful to you if you didn't know about it beforehand.
tl;dr - try all the different modems to see which one gives you the best speeds and call quality in your area, they are interchangeable. Use this thread to help you out.
This is one problem I've had when completely stock, ics, and jb. And it mostly occurs when I have ear phones plugged in
Sent from my SGH-I777 using XDA Premium App
Spxewood, all of what you said is common knowledge. If you're going to necro a thread, please only do so for new information
Sent from team Pirate! Using Tapatalk 2
Well EXCUSE ME for thinking that I WAS posting new information and for only trying to help people out!!!!
If you didn't like it then just ignore it!!!!!
Sent from my A500 using xda app-developers app
Hello everyone,
I'm not sure if I'm the only one or not since I haven't seen this issue in any of the threads for any JB Roms. This doesn't seem to be a problem for any 1 Rom, so I'm thinking it has to do with the CM10 base everyone is using. Here is the problem:
Everything is fine on the Rom for a few days - I can browse the web, make calls, get emails, etc... Then, I'll make a call, and the call will connect (call timer starts on screen), but I can't hear the person on the other end, and they can't hear me. I know this for a fact because I called my wife's phone which I was using as a test.
It would continue to stay like this (even after rebooting normal, rebooting to recovery and wiping cache / dalvik). The only thing that seemed to fix the problem would be to re-install the Rom.
For now I'm back on one of the CM9 Roms, and everything is ok. I really like CM10, but don't want to potentially get into an emergency situation, and then not be able to use my phone, or go to make a business call, and look like an idiot because people can't hear me, etc...
I just wanted to know if anyone else has experienced this, or has a fix? Thanks for your input.
what Rom ? (specific)
what carrier? ( is this an ATT device running with a different carrier? )
what region? (are you in the US, Canada, or elsewhere? )
Most reports are leaning toward the modem as the issue. If we know the above information, we can suggest a fix or patch based on them....g
gregsarg said:
what Rom ? (specific)
what carrier? ( is this an ATT device running with a different carrier? )
what region? (are you in the US, Canada, or elsewhere? )
Most reports are leaning toward the modem as the issue. If we know the above information, we can suggest a fix or patch based on them....g
Click to expand...
Click to collapse
Rom: I've tried all of the CM10 Roms currently available, and it happened on each of those. Most recent was CM10Hybrid Paranoid Android.
Carrier: AT&T
Region: US. More specifically - South East.
The last modem I flashed directly (unless one was cooked into a rom), was UCLF6.
scotty2hotty1125 said:
Rom: I've tried all of the CM10 Roms currently available, and it happened on each of those. Most recent was CM10Hybrid Paranoid Android.
Carrier: AT&T
Region: US. More specifically - South East.
The last modem I flashed directly (unless one was cooked into a rom), was UCLF6.
Click to expand...
Click to collapse
Lets test this a bit more....
Download and flash the Stock, UCLA1 modem, then reboot it 3 times. then try a call to a test device.
I've had marginal success with the modems above the UCLA range, and am using the UCLA1 Modem on virtually all of the roms I use. ( now if I could get all 1352 apn's from the stock rom to work...LOL ).....
It may show up as "unknown" in the "about phone" settings, but based on the tests I've done with it, you should be safe on the IMEI loss issue that some TMO users are reporting.
There is always that chance, but where you are US based on ATT, and that is their modem, you should be fine.
Test that bad boy out, and report back if ya would...thank you....g
I think its just the cm10 roms ..mainly because I've seen a post like this in all the JB forums...
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
scotty2hotty1125 said:
Hello everyone,
I'm not sure if I'm the only one or not since I haven't seen this issue in any of the threads for any JB Roms. This doesn't seem to be a problem for any 1 Rom, so I'm thinking it has to do with the CM10 base everyone is using. Here is the problem:
Everything is fine on the Rom for a few days - I can browse the web, make calls, get emails, etc... Then, I'll make a call, and the call will connect (call timer starts on screen), but I can't hear the person on the other end, and they can't hear me. I know this for a fact because I called my wife's phone which I was using as a test.
It would continue to stay like this (even after rebooting normal, rebooting to recovery and wiping cache / dalvik). The only thing that seemed to fix the problem would be to re-install the Rom.
For now I'm back on one of the CM9 Roms, and everything is ok. I really like CM10, but don't want to potentially get into an emergency situation, and then not be able to use my phone, or go to make a business call, and look like an idiot because people can't hear me, etc...
I just wanted to know if anyone else has experienced this, or has a fix? Thanks for your input.
Click to expand...
Click to collapse
I second that as the same happened to me, but all I did was reboot and it solved the issue. Happens at least once or twice a day for me.
Sent from my SAMSUNG-SGH-I717 using xda premium
Have any of you tried a scheduled cache clearing app ?
I've found many issues due to cache building in the background APK's....
It effectively bogs down everything , and once cleaned , fixes "a lot " of issues ...
Could someone test this and report back ?
At least we would know where to look at fixing the issues, rather than assuming it's a modem issue .....g
On every Jellybean rom, I have calling issues. On some roms, call audio wont work. On the rom I just flashed, it would not make or receive calls all together. Also, this happens only after a certain period of time. And it goes from sporadic occurances to permanent. It takes about a day or two for these issues to start appearing. This is so god damn frustrating because in the beginning the rom works perfectly, I spend all my time setting it up, and then a day or so later, I get these issues that make the phone completely unusable. Its absolutely ridiculous, and If anyone has any ideas, please please let me know. I love the JB roms but they all seem to make my phone unusable after a short time.
Please help....
JB roms are still a work in progress. And your problems could be caused/made worse by your setup (apps, widgets, tweaks, etc...). If you are using different kernels/radio, it can also contribute to problems. There are just too many variables.
My answer : use an ICS rom. ICS roms are alot more stable on our phone right now.
H0rn3t920 said:
On every Jellybean rom, I have calling issues. On some roms, call audio wont work. On the rom I just flashed, it would not make or receive calls all together. Also, this happens only after a certain period of time. And it goes from sporadic occurances to permanent. It takes about a day or two for these issues to start appearing. This is so god damn frustrating because in the beginning the rom works perfectly, I spend all my time setting it up, and then a day or so later, I get these issues that make the phone completely unusable. Its absolutely ridiculous, and If anyone has any ideas, please please let me know. I love the JB roms but they all seem to make my phone unusable after a short time.
Please help....
Click to expand...
Click to collapse
I am observing similar issues. I didn't used to happen before. I mean it did happen but it was a rare thing. But now it is more often. Almost everyday I have to reflash because of loosing phone audio.
I was rocking AOCP 3.1 , Worked really sweet and then decided to update to go for AOCP 4.1 and since then no rom that I tried have saved me. In fact I had to revert back to stock. What rom are you using?
People, it's a known issue on all JB Roms.
Don't open a thread about it.
xaragen said:
I am observing similar issues. I didn't used to happen before. I mean it did happen but it was a rare thing. But now it is more often. Almost everyday I have to reflash because of loosing phone audio.
I was rocking AOCP 3.1 , Worked really sweet and then decided to update to go for AOCP 4.1 and since then no rom that I tried have saved me. In fact I had to revert back to stock. What rom are you using?
Click to expand...
Click to collapse
I have the exact same issue now, It doesnt look like any rom is saving me right now.. my phone wont make calls or receive texts at all. I was running cookies and cream 4.1.2 and everytime i flash a JB rom it just seems to get worse and worse...
EDIT: I got it back on ICS. I guess I will just have to wait to use any JB roms... its unfortunate cause I love the JB roms hahaha
I have had issues with JB as well. I, just like the OP, would experience a perfectly working phone for a day or two then **** would hit the fan for no apparent reason. The phone would start locking up, randomly rebooting, apps would fail or not load, etc etc etc.
On most ROM's I didn't even have anything installed outside of the stock apps that CAME with the ROM.
Since then I have moved to a deoxed stock ICS ROM and honestly am not looking back. ICS is fast, stable, feature packed, and JUST WORKS.
My thing with JB was it's speed...but I was also comparing a barebones JB to the stock Gingerbread that came with the phone. I wasn't aware of how fast ICS was or I would have just gone with it long before hand!
But yeah, either way it goes, for me, no matter the ROM, JB always seemed to mess up at one point or another. Got annoying. Been going with ICS for over a week now with ZERO issues what so ever. No reboots, no crashes, no freezing, no nothing.
NEVERMIND..... ICS worked for one call, and now no calls work... great....
ICS roms are very stable.
You may have flashed your rom/kernel/radio incorrectly, or made some tweaks, or installed incompatible apps... There are too many variables.
Revert back to completely stock setup and see if the problems persist.
H0rn3t920 said:
NEVERMIND..... ICS worked for one call, and now no calls work... great....
Click to expand...
Click to collapse
I'll take a stab, what gapps? Do you use a call blocker of any kind?
Sent from my Samsung-SGH-I717 using xda premium
Same. I think it's the same for a lot of people, and I think the ones who say things run great either ignore the problems or are just extremely lucky.
Switch to Padawan. It's rock solid and you get all the fanciness of jelly bean. Since switching to it I've completely lost the itch to try out random JB ROMs. I have cool animations, Google Now, and ICS Browser+. And until I rebooted earlier to mess with stuff, I was at 142 hours uptime without any problems.
I'm not calling anyone a liar, though. I just think some people ignore more or are, as stated, lucky. I've done wiped everything, went back and wiped stuff post ROM, ran 3rd party (3rd ROM party) kernels and the ones that come with it. I've set cron to fix permissions on boot. And other than gapps -- which I always flash what the dev says to -- I run about ten 3rd party apps, and that's mostly made up of solid apps -- dropbox, exdialer, ics browser+.. etc..
Padawan, or even Nebula.
These ROMs are by the same dev, and the only difference is that Nebula is based off of Canadian version, which has even less bloat. It is better than stock.
I have been on Nebula for about a week, and no random reboots, no lockup, no phone problems. Everything just works.
ddochi11 said:
Padawan, or even Nebula.
These ROMs are by the same dev, and the only difference is that Nebula is based off of Canadian version, which has even less bloat. It is better than stock.
I have been on Nebula for about a week, and no random reboots, no lockup, no phone problems. Everything just works.
Click to expand...
Click to collapse
I like padawan, and Im on it now. But i still am getting this random issue where calls do not go through. Its so aggravating that Im about to smash my phone against the wall. Its happening all the time now and when I need to make a call, I cant. god damnit
have you flashed the most recent modem?
Yes, that was my next question.
Have you at any point flashed a different kernel/radio/modem? If you have, or if you do not know, search for stock kernel/radio/modem and flash them to see if it helps.
yes, uclf6 modem but eventually it just gives out.. idk what the issue is here everything works fine for a few days and out of the blue when I need my phone i cant receive or make calls anymore its INFURIATING
yes, uclf6 modem but eventually it just gives out.. idk what the issue is here everything works fine for a few days and out of the blue when I need my phone i cant receive or make calls anymore its INFURIATING
Revert back to complete stock and see if the issue still exists.
Mobile Network Type
Ltilt2 said:
People, it's a known issue on all JB Roms.
Don't open a thread about it.
Click to expand...
Click to collapse
I have had a similar issue with the JB rom's...so far I've tried only two and seem to find the aokp_quicyatt_jb_milestone-1 rom. I have noticed issues with my phone and LTE network coverage...meaning, I can see the signal go from 4G LTE to 3G to H, then gone...I looked at the phone status settings and noticed the mobile network type with this rom is LTE:13 and with the stock ICS rom (prior to rooting and flashing) it was LTE:14...is there a way that I can change it via terminal? Thank you in advance for any help on this. The one big difference I can see so far is the battery life...much better. Any help is greatly appreciated.
Issues are known....Thread Closed & Thank You.