So I may be missing something in all my searching, but I recently bought the hdtv adapter and a when I plug it in my tv doesn't recognize the input.
I guess my real question which could be why there's no input is, is it possible to stream netflix, youtube, or anything from the browser (hbogo) to a tv?
Thank you your any help and sorry if I just was doing some bad forum and google searches.
Sent from my GT-P7510 using xda premium
I have the HDTV adapter too and I had the same problem. Do you have your connection set like this? SGT 10.1 -> HDTV adapter-> TV via HDMI cable?
Its not enough you HAVE to have connected cable which has on one side 30-pin connector connected to HDTV adapter and on the other side USB pluged to a PC or any other source of power. My TV has USB so I pluged it to my TV. This solution I consider to be very unsatisfying. When I bought HDTV adapter I thought its everything I need, but it isnt, it has to be connected to power also.
Yeah that's the setup I have with the 30 pin going to the wall, I really want to watch hbo go on my tv. So frustrating
Sent from my GT-P7510 using xda premium
Related
Does anybody have any info on when this cable will be available? I was also wondering if anyone knows if I can play the 3D Movie from my phone on my 3D T.V. with this cable.
I don't have a 3D tv, so I can't test the 3D aspect of the cable, but I have tested the HDMI mirroring.
I ordered the MHL adaptor from T-Mobile's website. Look under the "data" accessories for the Sensation.
http://www.t-mobile.com/shop/Addons/Accessories/Default.aspx
It was $19 plus shipping. I tried a few local T-Mo stores, but nobody had it.
Anyway, I tested it last night. You need to have a charger, a normal HDMI cable, and the adaptor. The adaptor plugs into your phone's USB port, and then you need to plug the adaptor into your phone's charger and into the HDMI cable running to the TV.
You'll get full HDMI mirroring, meaning whatever is on your phone's display is on the TV. I only tested for a few minutes, but when I first attached it, there was a portrait view of my phone's screen up on the TV. I then tested both Netflix and HBO Go, which both flipped the image to landscape, filling the TV screen. Quality was pretty good with Netflix, and only adequate with HBO Go.
Hope that helps!
Rob
Anyone tested a non-MHL micro-USB to HDMI? I don't need charging, just want to display to a non-3D set.
wrxlvr said:
Anyone tested a non-MHL micro-USB to HDMI? I don't need charging, just want to display to a non-3D set.
Click to expand...
Click to collapse
No such thing. Must be plugged in to charge in order for the HDMI out to work.
wrxlvr said:
Anyone tested a non-MHL micro-USB to HDMI? I don't need charging, just want to display to a non-3D set.
Click to expand...
Click to collapse
Show me a non-MHL micro-USB to HDMI adapter/cable.
Sent from my PG86100 using XDA App
What a crappy setup. I MUCH prefer the Evo 4G way. With this I have to carry my charger, the USB cord for the charger, a full size HDMI cable, and this adapter? LAME.
You know there's a search button right? There are about 20 threads loaded with MHL information.
Well I did not find anything on Hdmi so can anyone tell me what to use to watch movies on my tv. I have the converter for micro to Hdmi.
Sent from my PG86100 using XDA App
You need to have a MHL adapter. The first evo would use a basic micro HDMI cable. But the 3D uses a micro USB/HDMI combo, hence the MHL. once you have that, you plug the adapter into the micro USB, then a HDMI plug and your charger into it.
Sent from another Dimension!
Yours has micro usb or micro hdmi? The adapter u need has two ports on it. It won't work unless u are running power to it at the same time u run hdmi.
Sent from my PG86100 using XDA App
I got my mhl cable from tmobile. Cheapest I found and works great. Just finished watching the new apes and final destination movies on my hdtv. Only downside is it sucks battery like a mofo. Even while charging and hooked up to the tv it loses battery
Suck Evo ballz apple
Hi,
Noob question...
I bought myself the MHL USB Adapter. I want to output my SGSII to my TV. I tried the obvious and plugged in the adapter into the phone along with the HDMI but nothing happened.
Is there something I need to enable (i.e. when connecting a laptop to a project, you have to press Alt+F4 to change output)??
BTW I am running the latest Cyanogen Mod (update-cm-9-20120606-NIGHTLY-galaxys2-signed).
Only stock Samsung roms will work.
Cm9 official problem list stated same, you should have seen that first.
I bought the cheapest mhl adapter of eBay. The adapter is powered and came with a mains power supply ( a micro USB supply like the GS2 itself) and a vradle . I have to power up the mhl before connecting to the HDMI socket on the TV. Otherwise there is nothing to set up or switch on the phone, it just works, you get the beep and the connection icon in the status bar at the top, like when connecting to a pc by a cable.
I use it to watch rented films from the play store. It gives a very good picture on the TV.
Sent from my GT-I9100 using XDA
Hello , What is the best way to stream media from the s3 to my TV (dont have dlna)
Thanks!
Hdmi? You should be able to purchase a MHL adapter, then connect a hdmi cable to the tv if you've got a hdmi compatible tv.
Sent from my iPad using Tapatalk HD
Buy a media player that does support DLNA...
All Share Dongle will do the job?
Depends what you want to stream if it's HD videos can the dongle provide sufficient playback compared to a wired connection?
I don't think it should be a problem my HTC media link can playback HD videos from YouTube and such from my One X. I think the dongle should be similar.
Sent from my iPad using Tapatalk HD
abovebeyondgal said:
All Share Dongle will do the job?
Click to expand...
Click to collapse
Yes,
But keep in mind a DLNA mediaplayer is not that expensive, aftermarket mobile gadgets usually are...
nikzDHD said:
Hdmi? You should be able to purchase a MHL adapter, then connect a hdmi cable to the tv if you've got a hdmi compatible tv.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
do remember that the S3 requires special 11-pin MHL connection. galaxy s3/note or other previous samsung MHL cable will not work with the S3. the S3 requires a 11-pin MHL cable to connect to HDTV - other MHL cables are 5-pin.
but Samsung does have a small ($10 approx.) adapter where you can plug it between the S3 and other ordinary MHL cable to make the cable work.
the Samsung Galaxy S3 MHL cable is approx $40. The MHL 11-pin adapter is approx $10.
If you connect the MHL cable to the device and the OTG cable to the MHL cable the device can't detect the OTG cable.
How can I make this work? I've seen videos in youtube that they connect their device to the TV at the same they have USB bluetooth mouse and keyboard connected.
Anyone tried using MHL cable and OTG cable at the same time?
Sent from xda premium powered by GT-I9300
anyone?
Sent from xda premium powered by GT-I9300
According to some of wikipedia entries it should be possible to use mhl and usb otg at the same time with a 11-pin mhl-hdmi adapter.
Wikipedia said:
11-pin MHL-USB Connector
The Samsung Galaxy S III uses a connector that is similar to the original 5-pin MHL-USB connector, but it uses 11-pins in order to achieve a few functional improvements over the 5-pin design.
It supports the use of USB and MHL simultaneously (note that the new Samsung 11-pin MHL-HDMI adapter also has a USB-OTG port).
Samsung’s Galaxy S III can power the MHL-HDMI adapter. Although this can theoretically also be done with the standard 5-pin micro-USB connector, the Galaxy S III's 11-pin connector is believed to be the first smartphone that supports this functionality.
Click to expand...
Click to collapse
Here you go.
So, it should work. But I couldnt make it work at the moment
I also got one of these 11-pin connectors and like it seems only the S3 has these adapters, so why the **** doesnt it work?? :/
I already asked sammy on facebook, just wondering what they will answer^^
Hopefully we will have some pos. results, dude.
cheers
bordikun said:
If you connect the MHL cable to the device and the OTG cable to the MHL cable the device can't detect the OTG cable.
How can I make this work? I've seen videos in youtube that they connect their device to the TV at the same they have USB bluetooth mouse and keyboard connected.
Anyone tried using MHL cable and OTG cable at the same time?
Sent from xda premium powered by GT-I9300
Click to expand...
Click to collapse
How would that work since the micro USB connection on the mhl cable is for power / charger?
In those YouTube videos is it possible that they have the mhl cable connected to the TV and power source, and the keyboard and mouse connected wirelessly via Bluetooth?
Confused because you said USB Bluetooth mouse and keyboard. From what I know they aren't USB.
Sent from my GT-I9300 using xda premium
Samsung should eventually release a dock to use both so unless someone figures it out first you'll just have to wait, because if it just took an 11 pin USB cable someone would have got it working already and we'd know about it, so I reckon it might have some extra circuitry to make it recognised by the phone.
Guys, as I already posted, the connector has 11 pins, so it should be possible to use OTG and MHL features at the same time. thats the only reason sammy brought out this connector and also cause of incompability with the 5-pin connector.
So they should bring the f*ck out somethin for the phone that activates this feature.
And a big problem I have with my mhl-connector is that I cant configure the output
on my 2 TVs at home I get 1080i, (both only 1080i capable), but the picture is kinda oversized so I cant see 100% percent of the picture, only 90% or smt like this.
But the funny part is, that I get on my 1680x1050p PC monitor only 576p screen, what actually sucks So it would be awesome if I could choose the resolution I want to have. But I guess its a thing of the connector (maybe it choose the resolutions iself).
cheers
so the one in the videos using keyboard and mouse are bluetooth thru phone?
Sent from xda premium powered by GT-I9300
I am SO HARD waiting for THAT "DOCK" hopefully will came out any day soon.
They should do iut fast. I'm waiting so hard for everything get connected with my Phone. It will be awsome if I don't need my Pc anymore.
To use the MHL cable you must have power connected to the adapter.
Sent from my GT-I9300 using Tapatalk 2
bordikun said:
If you connect the MHL cable to the device and the OTG cable to the MHL cable the device can't detect the OTG cable.
How can I make this work? I've seen videos in youtube that they connect their device to the TV at the same they have USB bluetooth mouse and keyboard connected.
Anyone tried using MHL cable and OTG cable at the same time?
Sent from xda premium powered by GT-I9300
Click to expand...
Click to collapse
That's damn funny because I have wanted to know whether that would work as well, lol.
Did seriously consider trying but as I was on holiday if they broke, I wouldn't be able to get replacement so didn't try it.
In theory I would think it could work, but only if you could somehow wire in power to the hdmi adapter as it appears to need that to run the hdmi aswell as provide power to the phone, at least enough that once the usb adapter tries to demand power to run it isn't enough for the phone to output.
As to whether this is just a a stupid guess and assumption of how the devices and being a noob, I don't know.
If you can get a micro female to male adapter with a usb splitter for power then technically I can't see why it wouldn't work if the limitations are physical as oppose to software based (whole other issue I have no clue about).
EDIT: Wow, when I started that post no one had replied, err, seems a little redundant now, lol. My bad. Also, this 5 minute wait to point this out, have seemed really long...
guess we'll have to wait for that dock.
Sent from xda premium powered by GT-I9300