Related
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
What were you flashing to stock from?
Can you enter download mode?
Sent from my GT-I9000 using Tapatalk
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
letor69 said:
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
Click to expand...
Click to collapse
Following these guide: http://forums.t-mobile.com/t5/Samsu...-upgrade-to-Android-2-2-Froyo-now/td-p/678871
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
No I can't enter Download mode. I have no power at all.
nomadrider123 said:
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Have you tried a simple
pull the battery
put the battery back after a few second
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
http://www.youtube.com/watch?v=E9LYLoK1Qog
http://www.youtube.com/watch?v=qNts11IBZ8Y
I click the power button nothing happens. I plug in the usb, nothing happens.
Timz917 said:
I click the power button nothing happens. I plug in the usb, nothing happens.
Click to expand...
Click to collapse
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
nomadrider123 said:
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
Click to expand...
Click to collapse
SAME AS ME heeeeeeelllpppp
not a single button is working, either JIG i have it, what can i do?
Sorry to disappoint you; it seems that you are out of luck. I was flashing my Vibrant in the similar situation like yours and my phone has never turned on again since then (6 weeks). I live in Thailand and have been searching both English and Thai version for a solution. None comes up so far. The only way the USB jig will help is your phone can be powered up. I have tried that myself. You can look for the confirmation elsewhere in this forum. Any way if you can find a diy solution, please let me know and I will post it here if I can find one myself. Thanks!
http://forum.xda-developers.com/showthread.php?t=848737
I am wait on this line here on your link.
More methods coming soon
do you have insurance with tmobile?
i bricked mine before i had a good understanding of the whole rom flashing concept and i could get a downloading screen but i didnt know what to do so they replaced it with no problem.
call and ask all they can do is say no.
nomadrider123 said:
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
HOW ABOIUT LEAVE PHONE CHARGING FOR 10 GO IN TO DARK ROOM SHUT OFF LIGHT PRESS POWER BUTTON AND SEE IF BACK LIGHT OF SCREEN LIGHTS UP, IF SO I TOLD YOU SO I HAD THE SAME BUT MY VIBRANT WORKS AGAIN UNLIKE YOURS p
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Your first option is out because I have tried that. The only option left is the second one. since I live in Thailand, I have to ship the phone to my friend in Los Angeles to have him replace it for me. It is costly, but at least I will get a phone to work.
It seems to me that this issue is a special case that doesn't happen very often. Only the chosen ones will get into trouble like this when making an error here and there while flashing rom.
I had an IPhone 3G before and, of course, I made mistakes while updating it with all kinds of firmware, but the hardware never fails on me no matter what I did.
Thanks all who try to help.
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
nomadrider123 said:
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
Click to expand...
Click to collapse
I'm not getting on your back, why is it you think so?
Most of the users as i've encountered don't have the sense to name their threads appropriately, the OP on this one specifically named it HARD BRICKED, so instead of telling him to do all these instructions, you could've asked 1 thing "when you plug your usb, or wall charger, does it show any lights? or Are there any symbols on the screen? any lights glowing?"
Those 2 questions could've saved him, and you time.
Trust me i'm a beginner as well, i just know how to get out of these because i've been with this problem a few times. Alot of people here know more than me, specifically s15.. idk his full name.
Hey I know this may be the wrong section but im sure we'll get the answer quick here. Was running MIUI 11-4-11 (newest update), decided to upgrade my boot-loader to GB newest, successfully updated, thought CM7 and MIUI were good with GB bootloaders now. Now that I was updated thought I could flash back to froyo roms ok. MISTAKE Decided to odin to KA7 instead of just JFD or whatever. Forgot KA7 had some kind of bootloader file sbl.bin
Phone odined, finished, and shut off completely and nothing works. No lights, no download mode, no computer triangle problem. Im going to order a jig from Team Whiskey but if anyone has ANY HELP OR SUGGESTIONS please reply and let me know lets get this figured out. I've had the vibrant a long time and been around xda forever im not a noob just was stupid.
THANKS!
Ive had a couple soft bricks too that Ive never had problems with. First hardbrick like this happened with a friends vibrant a year ago and we just sold it. Hoping I dont have a complete HARD BRICK and a paper weight now. Any info is good
Remove Battery.
Hold Both Volume Rockers (Up and Down). Keep Holding.
Place in battery and press power button while holding rockers.
You should get in Download Mode.
If this don't help, your bootloader is corrupted.... you need someone to JTAG.... JIG won't help.
EDIT: If above steps don't work..... After You Remove Battery... Also place in USB cord. And follow same steps
Yea ive tried this a bunch. Whats the info on a jtag? Cant afford a 180 dollar jtag. Youre saying the jig wont boost me into download mode.? Thought maybe it could since my phone may still work, just the bootloaders made it not recognize hardware buttons. Thank you for the reply
PowSniffer0110 said:
Yea ive tried this a bunch. Whats the info on a jtag? Cant afford a 180 dollar jtag. Youre saying the jig wont boost me into download mode.? Thought maybe it could since my phone may still work, just the bootloaders made it not recognize hardware buttons. Thank you for the reply
Click to expand...
Click to collapse
I bricked my phone recently.. completely hard bricked.. it will behave just as no battery in it....
I did lot of reading, and found that JIG may not help with corrupted bootloader.
A last thing for you to do is charge your phone overnight and try combo buttons to enter in recovery mode. This helped few people here, somehow, magically.
EDIT: For US people, I saw JTAG happens for below 50$
Cool thank you. Will try the charge and combos and check back here later. So assume its hardbricked and nothing works, best option is to send the phone by mail to someone with a jtag that will fix it for aboput $40 and send it back? Whats the likely hood of the jtag user fixing my either single bootloader corruption, or if I corrupted the secondary bootloader as well.
As long as you are on a GB bootloader you should try Volume down +Power button to get into download mode. I'm not sure but you should try
Sent from my T959 using XDA App
No need for a jtag. If you are comfortable taking your phone apart and have some electronics skills, you can do the unbrickable mod.
gregc2009 said:
No need for a jtag. If you are comfortable taking your phone apart and have some electronics skills, you can do the unbrickable mod.
Click to expand...
Click to collapse
Kinda nervous to dive into this. Is it worth the risk? I'd be down to go ahead and try it but my soldering skills arent up to key in the last two years
PowSniffer0110 said:
Kinda nervous to dive into this. Is it worth the risk? I'd be down to go ahead and try it but my soldering skills arent up to key in the last two years
Click to expand...
Click to collapse
Ahah, then you should go for the safer method, man. Better to be safe.
Sent from my SGH-T959 using XDA App
theexel said:
Ahah, then you should go for the safer method, man. Better to be safe.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Meaning jig? Who here has experience with a jig personally? Im wondering if itll force into download mode. I dont wanna pay $10 for a jig then have to pay another 50 to send it in for jtag repair. Thanks for the pointers and suggestions guys
I had something similar happen to me. I used mobiletechvideos service (http://mobiletechvideos.mybigcommerce.com/samsung-vibrant-unbrickable-mod/) for 30 dollars it worthy and it includes the return shipping. Takes around 7 to 10 day. Then I installed Ubuntu along side Windows (Ubuntu CD has that option) and perform the resurrection myself. You can also pay them 10 more to resurrect your Vibrant. After that it will be unbrickable, you can flash away and repair the phone no matter what.
PowSniffer0110 said:
Meaning jig? Who here has experience with a jig personally? Im wondering if itll force into download mode. I dont wanna pay $10 for a jig then have to pay another 50 to send it in for jtag repair. Thanks for the pointers and suggestions guys
Click to expand...
Click to collapse
I bought a JIG I've had bootloader issues in the past and I was able to work with it. Worst case you have to send the JIG back. I actually found it on Amazon. Its been a life saver since.
I bought my jig from teamwhiskey.com but u can probably find one around these forums and I don't know how some kind of jig magic but it works everytime.
Sent from my T959 using XDA App
I feel as though there is not enough douchiness against the OP... i think its pretty nasty when someone decides hes gonna take the android dev section for a question because question is more important rthan those in the appropriate section
Sent from a cell tower to the XDA server to you.
Download mod
PowSniffer0110 said:
Hey I know this may be the wrong section but im sure we'll get the answer quick here. Was running MIUI 11-4-11 (newest update), decided to upgrade my boot-loader to GB newest, successfully updated, thought CM7 and MIUI were good with GB bootloaders now. Now that I was updated thought I could flash back to froyo roms ok. MISTAKE Decided to odin to KA7 instead of just JFD or whatever. Forgot KA7 had some kind of bootloader file sbl.bin
Phone odined, finished, and shut off completely and nothing works. No lights, no download mode, no computer triangle problem. Im going to order a jig from Team Whiskey but if anyone has ANY HELP OR SUGGESTIONS please reply and let me know lets get this figured out. I've had the vibrant a long time and been around xda forever im not a noob just was stupid.
THANKS!
Click to expand...
Click to collapse
Download Mod:
1: Remove battery
2: connect usb Phone and Pc
3: Hold UP volume (Only Up ok)
4: Put battery back
Now u r on download mod
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
That's exactly what I would do
Sent from my SAMSUNG-SGH-I717 using XDA App
if you can get into download mode try reflashing the stock recovery found in the dev section then if you can get that fair try flashing the odin stock rom to see if it will boot
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
BLOWNCO said:
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
Click to expand...
Click to collapse
If jig won't work, I'm pretty sure hardware button won't work either. It goes without saying that he probably already tried everything he could find.
edpsx said:
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
Click to expand...
Click to collapse
That's not guinea pig. He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
foxbat121 said:
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
Click to expand...
Click to collapse
Yeah I thought about doing that - worst case scenario they tell me I voided my warranty and give me the phone back and I can still try finding a jtag solution or do i have to face any other consequences including maybe never getting my phone back?
foxbat121 said:
He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
Click to expand...
Click to collapse
That's my guess too. I screwed up badly. I would like to blame it on the late hour I did all that but it was just overexcited stupidity -_-
Try your buttons...
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
brojoe11 said:
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
Click to expand...
Click to collapse
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
cilmeron said:
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
Click to expand...
Click to collapse
I know on some phones that download mode can still be activated even if the screen isn't working properly and displaying it. I know many infuse users ran into problems and were still able to use Odin to flash stock and fix their phone. Try doing the hardware method of getting into download mode, and even though your screen doesn't show anything, it may still connect to Odin and you could try to flash back to stock.
Sent from my SGH-I997 using xda premium
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
mintu123 said:
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
Click to expand...
Click to collapse
Actually, you can brick it to the point of needing JTAG repairs to restore your device. That being said, it's very very very hard to brick it. You have to do something like flash firmware for a completely wrong device and screw up your bootloaders in the process.
cilmeron said:
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Click to expand...
Click to collapse
I've read some so my suggestion is this:
First make sure that you have the drivers installed for your phone. Then pull the battery wait for a few seconds. press the down button and then the power to go in download mode and hold them pressed for 20s. Now plug in the USB and press the volume up button. If Odin detects it you're good to go! If not... Well it's worth a shot
My theory is that even though the screen is blank, the hardware still boots properly. Just make sure your battery is somewhat charged. And also plug in the USB AFTER you "boot" in download mode.
Sent from my SGH-I717R using xda premium
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Click to expand...
Click to collapse
Everything here screams 'you should never attempt to modify your device again.'
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Why don't you find Adam_Outler in the hardware hacking forum? Send your phone to him and he'll hopefully be able to create an unbrickable mod. Not only will you likely have a fixed phone but it will mean volumes for our community.
Note, you will be without a phone for a bit
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
ekerbuddyeker said:
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
It's not that, we've all made mistakes, but it's like this guy went out of his way to try to brick the phone. This isn't like "oh crap, I flashed the wrong radio"
He tried to flash a ROM from a different SoC and every fail-safe wouldn't let him do it. I'm surprised at how well the different programs tried to save his phone, then he actually went ADB and forced it onto his phone and then he unplugs during a flash.
It's like he drove his car without paying attention and hit a fence that prevents you from flying off a cliff, then he kept ramming his car into the fence, then took some C4, blew up the fence, drove off the cliff, then started yelling "help, I fell off the cliff"
N3RD420 said:
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I'm confused, is there a CDMA Note? What do you mean "they won't know it's GSM"?
Hi all, im new to this android rooting stuff, i have jailbroken many apple devices, but im a big noob with rooting.
ill start from the start, i rooted my samsung galaxy s2 (I9210T) the other day with a stock ROM, using Odin and what not, it worked, no issues, but some non-market apps werent working but because of the stock ROM. So i followed a link that led me to "XDA"
In a hurry to root my phone with a custom ROM, i accidentally used a rom made for the I777, it booted and it all worked, just not the touch buttons at the bottom, (obviously), so again i downloaded a new ROM to get these buttons to work, and thinking im smart, i thought i could skip a step, and instead of flashing the phone again with odin, i loaded the clockwork recovery, and loaded this new ROM, without unloading the other thinking it would work, rebooted it, BUT it didnt reboot, it wont stay on, attempting to get into recovery is futile, and the phone is completely unresponsive, the computer makes the USB connection noises everytime i plug it in and take it out, but thats it, i do realise what ive done is completely idiotic and stupid, but is there anyway possible to recover my phone without having to take it in, or get a JTAG done?
Thanks to anyone who has a solution.
Citrus94 said:
Hi all, im new to this android rooting stuff, i have jailbroken many apple devices, but im a big noob with rooting.
ill start from the start, i rooted my samsung galaxy s2 (I9210T) the other day with a stock ROM, using Odin and what not, it worked, no issues, but some non-market apps werent working but because of the stock ROM. So i followed a link that led me to "XDA"
In a hurry to root my phone with a custom ROM, i accidentally used a rom made for the I777, it booted and it all worked, just not the touch buttons at the bottom, (obviously), so again i downloaded a new ROM to get these buttons to work, and thinking im smart, i thought i could skip a step, and instead of flashing the phone again with odin, i loaded the clockwork recovery, and loaded this new ROM, without unloading the other thinking it would work, rebooted it, BUT it didnt reboot, it wont stay on, attempting to get into recovery is futile, and the phone is completely unresponsive, the computer makes the USB connection noises everytime i plug it in and take it out, but thats it, i do realise what ive done is completely idiotic and stupid, but is there anyway possible to recover my phone without having to take it in, or get a JTAG done?
Thanks to anyone who has a solution.
Click to expand...
Click to collapse
well first sorry for ur present state ma8, if ur phone is not able to get into dwnld mode than its really difficult to do anything except for a JTAG done
just try using the three button combo Vol dwn + home + pwr butt and check for dwnld mode if u find success then flash a stock rom and u will get out of the situation
yeah, ive tried that so many times, too many to count, but, when doing it while its plugged into my computer, it makes the "USB disconnected" noise, which is weird.
i dont know where i can get a JTAG done, as i only recently saw it, not looked into it, im assuming phone repair shops do them? or can samsung do them even if the warruntee is voided, would they do it for a price? :s
Citrus94 said:
yeah, ive tried that so many times, too many to count, but, when doing it while its plugged into my computer, it makes the "USB disconnected" noise, which is weird.
i dont know where i can get a JTAG done, as i only recently saw it, not looked into it, im assuming phone repair shops do them? or can samsung do them even if the warruntee is voided, would they do it for a price? :s
Click to expand...
Click to collapse
the samsung people will defenetly do it, please check the same with them regarding the price etc
Citrus94 said:
yeah, ive tried that so many times, too many to count, but, when doing it while its plugged into my computer, it makes the "USB disconnected" noise, which is weird.
i dont know where i can get a JTAG done, as i only recently saw it, not looked into it, im assuming phone repair shops do them? or can samsung do them even if the warruntee is voided, would they do it for a price? :s
Click to expand...
Click to collapse
as u said u hear the usb connection sound when u connect ur phone
try using a usb jig
there may b chances of getting the phone in download mode
u can buy a usb jig from ebay
Sun90 said:
the samsung people will defenetly do it, please check the same with them regarding the price etc
Click to expand...
Click to collapse
well ill see about travelling into town after i find the price then, just hopefully it doesnt take long, will be away in a week :S
Thanks anyway sun90, just need to make sure there was nothing that can be done first, definately wont be making that mistake again LOL
neerajganga said:
as u said u hear the usb connection sound when u connect ur phone
try using a usb jig
there may b chances of getting the phone in download mode
u can buy a usb jig from ebay
Click to expand...
Click to collapse
that actually might work!! hope it does, atleast the jigs are cheap, orded one off ebay, should be here soon..... fingers crossed.
Erm, jig might help, but sounds like you've flashed a bad bootloader. Or a good bootloader, if you've got a I777. On the bright side, you've now got a really attractive paper weight. People will think your incredibly rich when you throw around a Galaxy S II just you just don't give a ****. Next time you're at a club single out the sluttiest girl there, go up to her and ask if she will have sex with you for a Galaxy S II, tell her the phone is out of battery, then go and do your business. When you hand over the phone make sure you are confident and humorous about it, give her a charging cable to make it look super legit. Oh and you should probably be wearing a balaclava throughout the whole process, you don't want her seeking revenge when she knows she's been used.
postfatal said:
Erm, jig might help, but sounds like you've flashed a bad bootloader. Or a good bootloader, if you've got a I777. On the bright side, you've now got a really attractive paper weight. People will think your incredibly rich when you throw around a Galaxy S II just you just don't give a ****. Next time you're at a club single out the sluttiest girl there, go up to her and ask if she will have sex with you for a Galaxy S II, tell her the phone is out of battery, then go and do your business. When you hand over the phone make sure you are confident and humorous about it, give her a charging cable to make it look super legit. Oh and you should probably be wearing a balaclava throughout the whole process, you don't want her seeking revenge when she knows she's been used.
Click to expand...
Click to collapse
As funny as what you said is XD i dont think telstra will be too happy that im using my phone to get with chicks, maybe after the 24 months is up XD
funny stuff just happened, i sent my phone away to get fixed, and it took them two weeks +
way too long, and when i got it back, i didnt have to pay, and this is what the samsung team did, as follows: Removed and replaced LCD screen with a new one, removed and replaced FPCB, checked main PCB, software upgraded, cleaned contacts, re-aligned connectors, reset to manufacturers specifications.
in other words, thanks to my Jig i bought off ebay, THEY DIDNT HAVE A CLUE WTH HAPPENED WITH IT!, but far out, what a repair eh?
Take a look at this, they can resurrect hard bricked phones:
http://forum.xda-developers.com/showthread.php?t=1429491
The total price is about £40 I think, hopefully it can be fixed! good luck!
Bought one, but have to wait till it ships, so figured I would ask if anybody in the 757 has a mini-usb jig that I could use to get my Note into download mode. Send PM if you do.
Thanks in advance.
U can reboot into download thru recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
mrstone77 said:
U can reboot into download thru recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Walk me through that one, no response to anything, power and up volume results in nothing. Plugging into usb results in nothing Windows, ODIN nor Kies registers it.
vanemburghj said:
Bought one, but have to wait till it ships, so figured I would ask if anybody in the 757 has a mini-usb jig that I could use to get my Note into download mode. Send PM if you do.
Thanks in advance.
Click to expand...
Click to collapse
I think this is what you're looking for, yes?
http://galaxys2root.com/tag/diy-usb-jig/
Sidenote:
I thought it was "down volume button + power " to get into ODIN mode for Samsung devices
up+ down is for recovery
Shirokishi said:
I think this is what you're looking for, yes?
http://galaxys2root.com/tag/diy-usb-jig/
Sidenote:
I thought it was "down volume button + power " to get into ODIN mode for Samsung devices
up+ down is for recovery
Click to expand...
Click to collapse
That is what I ordered, either way on the buttons, phone is bricked to point will take very special sauce to fix it.
Oh... I didn't know all of that... When my phone freezes I can hold the power button for 10 seconds n it'll reboot but u r n need of special sauce... I'm n the 540 sorry
Sent from my SAMSUNG-SGH-I717 using xda premium
mrstone77 said:
Oh... I didn't know all of that... When my phone freezes I can hold the power button for 10 seconds n it'll reboot but u r n need of special sauce... I'm n the 540 sorry
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Yep am with you on that one, I have soft bricked before, but nothing like this, my very first true brick of my cell. Hopefully Jig I ordered at least gets me into download mode, where I can fix it.
vanemburghj said:
Yep am with you on that one, I have soft bricked before, but nothing like this, my very first true brick of my cell. Hopefully Jig I ordered at least gets me into download mode, where I can fix it.
Click to expand...
Click to collapse
If you can see the samsung bootloader then yeah there's hope otherwise you're gonna need the $100 fix for it.
But at least people are responding, I got no love on my end, lol
keeping things in perspective, as I posted before, I have never seen anyone report that a jig does any good on this phone..
You would be better off either using JTAG, or calling Samsung, and playing stupid, and tell them it died after you did an update that the phone requested..they will send you a replacement, with no questions asked.
go through the general and q&a sections; you will see that a jig doesn't do anything for this phone..
wase4711 said:
keeping things in perspective, as I posted before, I have never seen anyone report that a jig does any good on this phone..
You would be better off either using JTAG, or calling Samsung, and playing stupid, and tell them it died after you did an update that the phone requested..they will send you a replacement, with no questions asked.
go through the general and q&a sections; you will see that a jig doesn't do anything for this phone..
Click to expand...
Click to collapse
Well smokestack76 told you differently yesterday. He said over 20 times with a jig. Plus for $1.60 I will give it a try.
yes, for the price, if it makes you feel better, try it..
and, if you believe him, when you can find 20 others that said it did absolutely nothing, then that's your choice.
the sooner you send it in to Samsung, the sooner you will have a working phone..
If Samsung is wiling to send you a loaner phone while you're under warranty i can't see why you wouldnt do that.
I know Nintendo is awesome like that but apparently Samsung reps are quite jaded when you do something silly like ask an honest question.
I wish Samsung would honor warranty services if the device hasn't been on the market longer than year.
I'm A. Maybe he Made a mistake and wants to own up for it insted of weasling into a fraudulent phone.
B. I would be a little jaded as well when I get people calling me all day that have messed up their own phone and are now trying to steal from me.
C. Samsung does honor warranties a year after the device has been on market. YOUR WARRANTY DOES NOT GO INTO EFFECT UNTIL THE ORIGINAL DATE OF PURCHASE. not when the first one of its kind rolls off the assembly line.
Also, wase a jig does work of you are not actually bricked, if you were to be soft bricked the jig would force download mode. I had a captivate I built a jig for, first thing I did was try it on my note. Bam, download mode.
And finally op it's a micro usb jig not mini. Mini is bigger than micro
yeah bro, I know a jig works for SOME phones; it helped me bring my S2 back to life..
However, I have read many many reports of it doing nothing for the Note, so that was why I said what I did..
Plus, people are using the term "Bricked" around here in so many ways, that its hard to know what they mean when they say it..to me, a bricked phone is DEAD, and nothing but an expensive paperweight.....
I can take a video of my note going from off to download mode with nothing but my jig. However the same jig that works on both my phones is out of resistance tolerance on my brothers sgs2.
And yes bricked is used much too often,it is a term to describe when your phone is inert, has no pliability and just sits there, like the baked red clay building material it was named for.
was curious to see if the OP had any luck with the jig....
Well the jig did nothing for me. I suggest send your phone to mobiletechvideos.com for repair, he goes through the JTAG recovery method, and he also unlocked mine... he did a great job. I bricked my Note flashing a ROM for another device by mistake, could not use the jig for anything, so had it repaired. Feeling really happy now... hope this helps.
the jig isn't and was never meant to fix a hard brick...
[history lesson]
Back on captivate, certain bootloaders would disable the button combos for download and recovery, making a simple (I hate the term... But) soft brick into a much stickier situation, so it was discovered that using 300k ohms of resistance across certain pins on the usb port from a powered off state would trigger download mode in seconds, making you then able to simply odin a stock rom and try again.
It was later discovered that the jig had the same effect on the sgs2 with the added benefit of restting the flash counter.
[/history lesson]
If you flash a firmware for the international note on an i717 you will need jtag because you are indeed bricked of the hard variety.
wase4711 said:
was curious to see if the OP had any luck with the jig....
Click to expand...
Click to collapse
Nope gig still in the mail, however took Note to ATT Device Service Center and they told me mother board failure and replaced it. So might not have been related to flashing, inspection seem pretty in depth, removed back cover, using multi meter type of tool and said mother board didn't provide correct response to input. My mandatory 10 days to return no functioning unit is 17 Dec so don't think will have chance to try the jig before I send it back or be charged $549 for non-functioning unit.
vanemburghj said:
Nope gig still in the mail, however took Note to ATT Device Service Center and they told me mother board failure and replaced it. So might not have been related to flashing, inspection seem pretty in depth, removed back cover, using multi meter type of tool and said mother board didn't provide correct response to input. My mandatory 10 days to return no functioning unit is 17 Dec so don't think will have chance to try the jig before I send it back or be charged $549 for non-functioning unit.
Click to expand...
Click to collapse
might as well keep the jig for the couple of bucks it cost..plus, even if it doesn't work for this phone, it might work for your next one!