Related
Regarding the Samsung Galaxy S2 I9100,
I'm totally new in this field and I have no idea which stock kernel should I be getting.
The info says:
PDA: UHKI2
PHONE: UHKI1
CSC: UBKI2
BTW, kies writes the following:
PDA:KI2, PHONE:KI1, CSC:KI2 (VNO)
which part of that matters most? I can't find a kernel that exactly matches mine.
Any help would be appreciated.
Thanks.
PS: I found "GT-I9100_VNO_I9100UHKE2_I9100UHKE2_I9100UBKD1" - does it match mine?
When looking for a kernel, which part should match mine? UH -> UH? or KI2 -> KI2? I am totally confused.
what would happen if I switched to another stock kernel, which is different than my stock one?
You are running the latest rom for your location (Some where Latin America) The one you found is an old one.
You have to read read read all of the posts or use the search engine, before you start trying to brick your phone.
can you explain abit more?
What if I change my ROM/kernel/whatever and after that I wanna go back to stock.
How do I get MY kernel?
Sorry for being annoying :>
Look here
http://forum.xda-developers.com/showthread.php?t=1101671
and here: http://forum.xda-developers.com/showthread.php?t=1075278
---------- Post added at 03:43 PM ---------- Previous post was at 03:40 PM ----------
Start reading all of this: http://forum.xda-developers.com/showthread.php?t=1065995
the second thread you linked is where I found the "GT-I9100_VNO_I9100UHKE2_I9100UHKE2_I9100UBKD1"
I didn't find anything that matches mine in there.
so where would I get this kernel?
barakbk said:
can you explain abit more?
What if I change my ROM/kernel/whatever and after that I wanna go back to stock.
How do I get MY kernel?
Sorry for being annoying :>
Click to expand...
Click to collapse
You want firmware not a kernel to revert .
kernel is not firmware its the kernel of the firmware .
Stock firmware is in the stock roms post .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
I think that I kinda got it.
Anyway, thanks for helping!
I will keep reading more about this..
last question though:
When I get a custom ROM, it may also change my kernel right?
and is the ROM mentioned above - "GT-I9100_VNO_I9100UHKE2_I9100UHKE2_I9100UBKD1" the same as mine? (but older)
Hi, Please I need help, right now..
I flased CM 7.1 on my SGS2, and it had a problem the installation went fine, but after 5 minutes use it was freezing, and I could only pull out the battery to restart it. I tried restoring my nandroidbackup with CWM, but it seems that he version changed from 5.0.2.7 to 5.0.2.6 and now it does recognize by backup anymore.
Now..in CWM, I wiped/factory reset, and wiped dalvik cache and power off the phone. Now I want to install stock. I think I have to use ODIN. What kernel and ROM should I use ? Is it ok if I flash with ODIN after wiping everyting ?
yes wipe everything and use odin to flash correct rom for your region or the latest of any other region doesnt matter. but you should have i9100.
Hi guys,
I got my orange samsung galaxy s2 less than a week. Yesterday after rooting, flashing villianrom, i like an idiot, installed Clearglass 1.6 Theme zip via CWM. After rebooting, the phone has now gone into a boot loop. But since i had a nandroid backup (NOT A ZIP FILE!), i thought i'll simply restore...but i can't! The sdcard won't mount. So then i found THIS THREAD.
After following the instructions, i still can't mount the SD Card, yet it's fine in windows 7.
I also thought i'd try to use the ODIN method to reflash my stock fw, but i can't find the correct kernel version . FYI, i'm from uk and the details of my phone are below:-
MODEL: GT-I9100P
ANDROID VERSION: 2.3.4
BASEBAND VERSION: I9100PBVKI2
KERNEL: [email protected] #2
BUILD NO: GINGERBREAD.BVKI3
PLEASE PLEASE HELP ME! I can't be without my phone
Not sure what you are asking .
Firmware is not kernel whatever your correct firmware is that includes the kernel .
You have a 1900P whatever the P is .
Find the firmware not the kernel here .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Alternative
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Still problems use usb jig to set rom counter to zero .
Return to service centre .
jje
Thanks for your fast reply JJEgan. Could you please tell me which stock fw/rom i need to download as the only one that looks close to mine (KI3) is a poland one and i'm in UK.
wowandroid said:
Thanks for your fast reply JJEgan. Could you please tell me which stock fw/rom i need to download as the only one that looks close to mine (KI3) is a poland one and i'm in UK.
Click to expand...
Click to collapse
No idea what your firmware is as you have fl;ashed it .
Based on OP KI3
Then use KI4 CPW UK firmware is what i would do to get back to a working phone ,
CPW (UK): http://www.multiupload.com/QROGHPRZVK
jje
Many thanks for showing me the correct version. I wasn't too sure as i didn't want to mess up the phone permanently. So i simply follow the ODIN boot loop guide?
The way it looks to me is that CWM/Phone is corrupted as i've tried everything - mount/format/unmount/re-mount sd, but it won't detect.
OH BTW! Can you please clarify something for me. I thought that since my orange stock rom said "KI3", i must always get a "KI3"....have i got that wrong? if so how can a KI4 work on a KI3 and why is it not necessary to stick with KI3?
Hey there wowandroid, the KI* is, in my humble opinion just a revision number, higher could mean better reliability in terms of signal and perhaps even battery drain
Sent from my GT-I9100 using XDA App
thanks AJ. It's just that my i9100 is P model (i9100P) and has NFC capabilities. I've managed to flash the phone back with the ki4 rom, so big thank you to JJEgan. I just thought that because i have a p model, i might end up removing features once i flash with a ki4.
Anyway, now that i've got it working, can i go ahead and use odin to flash villianrom/checkrom back again?
wowandroid said:
Hi guys,
I got my orange samsung galaxy s2 less than a week. Yesterday after rooting, flashing villianrom, i like an idiot, installed Clearglass 1.6 Theme zip via CWM. After rebooting, the phone has now gone into a boot loop. But since i had a nandroid backup (NOT A ZIP FILE!), i thought i'll simply restore...but i can't! The sdcard won't mount. So then i found THIS THREAD.
After following the instructions, i still can't mount the SD Card, yet it's fine in windows 7.
I also thought i'd try to use the ODIN method to reflash my stock fw, but i can't find the correct kernel version . FYI, i'm from uk and the details of my phone are below:-
MODEL: GT-I9100P
ANDROID VERSION: 2.3.4
BASEBAND VERSION: I9100PBVKI2
KERNEL: [email protected] #2
BUILD NO: GINGERBREAD.BVKI3
PLEASE PLEASE HELP ME! I can't be without my phone
Click to expand...
Click to collapse
Should help you http://forum.xda-developers.com/showthread.php?t=1108499
hi checkrom, nice way of upping ur post count, lol. if you hadn't noticed, i have already managed to get the phone working...i now want to know if its safe to reflash villian, since i've lost CWM.
wowandroid said:
hi checkrom, nice way of upping ur post count, lol. if you hadn't noticed, i have already managed to get the phone working...i now want to know if its safe to reflash villian, since i've lost CWM.
Click to expand...
Click to collapse
Ok sure!
Best would be just flash a suitable CF Root
And then u will get CWM after that baam install Villan
(LOL 5 min wate took me so long)
cheers mate. I assume from your nick on forum that you've got checkrom? If so, could you tell me how you get a great looking theme installed after checkrom has been flashed? The last time i tried it, i messed up and none of the kitchen apps themes ever changed the looks (just boring samsung looks)
wowandroid said:
cheers mate. I assume from your nick on forum that you've got checkrom? If so, could you tell me how you get a great looking theme installed after checkrom has been flashed? The last time i tried it, i messed up and none of the kitchen apps themes ever changed the looks (just boring samsung looks)
Click to expand...
Click to collapse
checkrom is compactable with every Theme out there if its built for the latest XWKK5 version which checkrom is on!
So first
1)Install ROM
2)Use there Kitchen Download only any one of the themes, and hit apply and then install (Obviously)
OR
You can Download manually from the Forums any theme or any thing for stock XWKK5
3)After a theme install u will reboot.
4)Then use there Kitchen to flash any mods etc u want
Personally i use this via Kitchen http://forum.xda-developers.com/showthread.php?t=1310527
thanks checkrom. I don't suppose we can chat on skype/msn/yahoo? I just need some help, and could do with instant answers if i get stuck. If you can, pls PM me.
Thank You
wowandroid said:
thanks checkrom. I don't suppose we can chat on skype/msn/yahoo? I just need some help, and could do with instant answers if i get stuck. If you can, pls PM me.
Thank You
Click to expand...
Click to collapse
just post here if u get suck i am available for an hour haha
thanks...the problem is that i'm fixing a DSi for the kids...i'm going to be at least an hour or two.
wowandroid said:
thanks...the problem is that i'm fixing a DSi for the kids...i'm going to be at least an hour or two.
Click to expand...
Click to collapse
Just pm me i will reply asap i gt the pm
thats kool, thanks!
wowandroid said:
thats kool, thanks!
Click to expand...
Click to collapse
My pleasure
hi guys,
i'm about to get started with the update. couple of questions though:-
1. What kernel do you recommend? I need a kernel which gives it the longest battery life if possible.
2. What theme do you recommend? I need a theme which is good eyecandy, but isn't too bloated. Something like this for the villianrom:- http://forum.xda-developers.com/showthread.php?t=1229723
3. Is there a rom posted that has already been customised and tweaked with popular kernels/themes? Saves me messing around.
wowandroid said:
hi guys,
i'm about to get started with the update. couple of questions though:-
3. Is there a rom posted that has already been customised and tweaked with popular kernels/themes? Saves me messing around.
Click to expand...
Click to collapse
Yep look in development section .
jje
I have a Telecom NZ SG S2 phone, and yesterday Kies told me there was a new version available and I allowed it to update me to ICS. I was CF-Rooted on my old version, but now I can not find a CF-Root file matching my new LP5 kernel. This is what "About phone" reports:
Model number
GT-I9100T
Android version
4.0.3
Baseband version
I9100TDOLP4
Kernel version
3.0.15-I9100TDOLP5-CL345054
[email protected] #3
Build number
IML74K.DOLP5
Is there a file that matches this kernel? Or is it a new one?
There isn't an exact match. Which leaves you with two options:-
A) As per the CFRoot thread "Help ! Which file do I use" - "If there's no match and I'm not making one, try finding the closest match."
B) Extract the kernel zImage from the stock rom, send it to Chainfire & ask him nicely to make a CFRoot kernel. Whether he will or not, who knows.
MistahBungle said:
There isn't an exact match. Which leaves you with two options:-
A) As per the CFRoot thread "Help ! Which file do I use" - "If there's no match and I'm not making one, try finding the closest match."
B) Extract the kernel zImage from the stock rom, send it to Chainfire & ask him nicely to make a CFRoot kernel. Whether he will or not, who knows.
Click to expand...
Click to collapse
Thanks for that. I am trying both routes at the moment.
For A), there is a CF-Root-SGS2_XX_OXX_LP6-v5.2-CWM5.zip file win an LP6 kernel that looks to be the closest. I can try that.
For B), I have found FUS, downloaded the stock I9100TDOLP5_I9100TTNZLP3_I9100TDOLP4_HOME.tar.md5 file and extracted the zImage file from it. I think, though, that posting it and attracting Chainfire's attention will need to wait a bit as I am a complete noobie here and can not post on the developer forums yet. Is posting to the http://forum.xda-developers.com/showthread.php?p=14283342 thread the correct way to go about that?
fe31nz said:
Thanks for that. I am trying both routes at the moment.
For A), there is a CF-Root-SGS2_XX_OXX_LP6-v5.2-CWM5.zip file win an LP6 kernel that looks to be the closest. I can try that.
For B), I have found FUS, downloaded the stock I9100TDOLP5_I9100TTNZLP3_I9100TDOLP4_HOME.tar.md5 file and extracted the zImage file from it. I think, though, that posting it and attracting Chainfire's attention will need to wait a bit as I am a complete noobie here and can not post on the developer forums yet. Is posting to the http://forum.xda-developers.com/showthread.php?p=14283342 thread the correct way to go about that?
Click to expand...
Click to collapse
hey u can try the lps one below which works with LP4
http://download.chainfire.eu/157/CF-Root/SGS2/CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5.zip
That seems to be the closest match, so yeah, you can use that kernel.
Good job downloading the rom with Checkfus (keep that on your PC in case you ever need to go back to stock for whatever reason). A lot of people wouldn't show that kind of initiative Yeah, post it to the thread, or I guess you might be able to attach it to a PM (not sure if it will fit into the attachment size limit or not).
Just be patient & I'm sure he'll get around to making the exact match sooner or later, but you'll have already rooted your phone with the LP6 kernel and using it or an exact match isn't going to make any difference really at the end of the day.
fe31nz said:
Thanks for that. I am trying both routes at the moment.
For A), there is a CF-Root-SGS2_XX_OXX_LP6-v5.2-CWM5.zip file win an LP6 kernel that looks to be the closest. I can try that.
For B), I have found FUS, downloaded the stock I9100TDOLP5_I9100TTNZLP3_I9100TDOLP4_HOME.tar.md5 file and extracted the zImage file from it. I think, though, that posting it and attracting Chainfire's attention will need to wait a bit as I am a complete noobie here and can not post on the developer forums yet. Is posting to the http://forum.xda-developers.com/showthread.php?p=14283342 thread the correct way to go about that?
Click to expand...
Click to collapse
Sun90 said:
hey u can try the lps one below which works with LP4
[download.chainfire.eu/157/CF-Root/SGS2/CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5.zip
Click to expand...
Click to collapse
Thanks, this kernel worked for me. Or at least it is so far - I have not tested too much yet, but all seems normal.
I did try the LP6 one also, but that did not boot properly. I suspect I need CF-Root 5.4 for ICS, and that one was only 5.2.
Hi Guys,
So im looking to root my SGS2 currently running the LP5. However, im packing myself incase i brick it... lol
So im downloading the LP5 stuff incase of a mishap.
I just want to get it all straight before i go doing anything so bare with me please
So i download keis so i have the usb drivers.
Download Odin.
Download the LPS CF-ROOT
Launch the LPS in odin under PDA
Pack myself a little
Bing bong im rooted??
cheers guys
PeeTang said:
Hi Guys,
So im looking to root my SGS2 currently running the LP5. However, im packing myself incase i brick it... lol
So im downloading the LP5 stuff incase of a mishap.
I just want to get it all straight before i go doing anything so bare with me please
So i download keis so i have the usb drivers.
Download Odin.
Download the LPS CF-ROOT
Launch the LPS in odin under PDA
Pack myself a little
Bing bong im rooted??
cheers guys
Click to expand...
Click to collapse
yea
Ok so i downloaded the LPS.rar and extracted it and its a zImage not a .tar.
how do i get it to a .tar file?
[Update] Got It!!
LPS kernel ok?
fe31nz - I am keen to root my phone and wanted to know how you were getting on with using LPS kernel? Everything working alright? I have a Telecom branded phone but am using 2 Degrees, it's working fine, but I want to root it to remove the stupid Y! Tworld browser and get the default browser, plus obviously try some other goodies that require root.
From what I have garnered reading the forums, the CF-Root shouldn't affect the modem etc, but does that mean it also doesn't change the frequencies the phone uses? I see this model probably has the ability to use 5 bands WCDMA, but the firmware sets which are enabled, I just don't want to screw up my 3G.
---------- Post added at 10:08 AM ---------- Previous post was at 10:01 AM ----------
Also, just wondering how you figure out which is the closest match? What are you basing your decision for LPS on?
I have had exactly 0 problems with my LPS kernel. I tried it because it was recommended and it had CF-Root 5.4. I already knew I could recover back to the stock kernel if necessary as I had already done that, using the ROM downloaded via checkfus, when the LP6 kernel did not work. So I was happy to try any suggestion.
fe31nz said:
I have had exactly 0 problems with my LPS kernel. I tried it because it was recommended and it had CF-Root 5.4. I already knew I could recover back to the stock kernel if necessary as I had already done that, using the ROM downloaded via checkfus, when the LP6 kernel did not work. So I was happy to try any suggestion.
Click to expand...
Click to collapse
Cool, thanks for that, I will give it a go. Got the stock firmware, kernel etc just in case. I think I will do some benchmarks first for 3G speeds and then compare, to be sure I haven't made any reduction in quality and speed before testing with the LPS kernel.
Cheers.
I put the lps on my ICS sgs2 and have had no probs either
Sent from my GT-I9100T using XDA
Rooted my phone thanks to you guys!
Just need to replace the retarded Y! Tworld browser with the real ICS browser. I have tried to do this using ES File Explorer and a modded ICS browser found here on XDA, but I can't get it to work either by trying to install it, or copying it to system\apps.
Anyone else done this?
I eventually used checkfus to download the official Vodafone ROM which has the proper Android browser, was happy to see my bookmarks come down with google sync. I can't believe Telecom have put out a ROM with a broken browser that prevents users from syncing their bookmarks with their google account like any normal Android user would expect. Very poor form Telecom!
Gingerbread rom??
Here is my next issue for you guys (posting here so the kiwis see it)
on gingerbread when my facebook contacts synced it also synced with other apps like viber etc
i think it was the samsung facebook sync that did it but the ics version only syncs messages. Does anyone know how to get around this or does someone have the origonal telecom gingerbread rom so i can flash back.
Cheers guys
Hi All,
I bought a used galaxy S2 I9100 yesterday,new to android.I have been a iphone user for 4 years and pretty aware of jailbreaking, unlocking installing custom firmwares. the terminology here in Android world is different though.
Have searched and read through different guides on the forum but still got some questions.
Model GT i900 LKAH3G
PDA i9100XWKE1
CSC I9100H3GKD4
Kernel 2.6.35.7-I9100XWKDD-CL161513 [email protected] # 2
Build Number GINGERBREAD.XWKE1
Looks like it was on Three network but it is unlocked mobile as i can use my airtel sim on the phone.
I dont want the Three network related stuff on the phone so i need to debrand the phone -- how to do it? there is guide on XDA forum but it talks primarily for O2 phones or might be i did not read it correctly. (there are also some options like the network mode which are disabled on this ROM )
Once debranding is done should i be ok to use any ROM or kernel?
Which would be best ROM to be installed and will it work for me in India.
Can i install the custom ROM and would i be able to install apps from the android Market.
If these have already been answered , can you please provide the link for that thread.
Thank You
I'd advice you to try the new ics roms, you can find the instructions inside the various rom threads, flashing these roms will get rid of the three junk as well as update your phone to the latest android os a.k.a ICS ..........
there is no such thing as a best rom for a specific country, but you can try different modems to find the one that gives you the best network and battery, you can find your modem under the baseband in about phone....
google for more info
happy flashing and welcome to Android we luf you here...........
Learn how to use Odin
Download stock gb from from checkfus or sammobile.
Flash using Odin, you will be unbranded.
After that root using cfroot, now learn how to use cfroot.
Now you can flash custom roms.
Sent from my GT-I9100 using Tapatalk 2
kjplasma said:
I'd advice you to try the new ics roms, you can find the instructions inside the various rom threads, flashing these roms will get rid of the three junk as well as update your phone to the latest android os a.k.a ICS ..........
there is no such thing as a best rom for a specific country, but you can try different modems to find the one that gives you the best network and battery, you can find your modem under the baseband in about phone....
google for more info
happy flashing and welcome to Android we luf you here...........
Click to expand...
Click to collapse
atifsh said:
Learn how to use Odin
Download stock gb from from checkfus or sammobile.
Flash using Odin, you will be unbranded.
After that root using cfroot, now learn how to use cfroot.
Now you can flash custom roms.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi KJplasma &atifsh
Thank you for the details.
can i install the below listed indian stock firmware using odin
PDA :I9100XWKE8 CSC:I9100ODDKE2
or do i need to install the firmware from UK
PDA :I9100XXKF2 CSC:MULTIOXAKF2
do i need to change the csc if i install the UK version?
Thanks
forget about csc.
if you have i9100 you can flash any region ROM and use in any country.
if you want Gb than go for la2 italy rom , iv used that and last time i check that was the fastest stock rom for GB
you can also flash ICS rom like uk lp7 too, just stay away from lp9 roms at the moment.
ad dont forget to wipe using the dialpad code *2767*3855#. [will wipe all data stored]
atifsh said:
forget about csc.
if you have i9100 you can flash any region ROM and use in any country.
if you want Gb than go for la2 italy rom , iv used that and last time i check that was the fastest stock rom for GB
you can also flash ICS rom like uk lp7 too, just stay away from lp9 roms at the moment.
ad dont forget to wipe using the dialpad code *2767*3855#. [will wipe all data stored]
Click to expand...
Click to collapse
Hey Atifsh,
Thanks for the quick reply.
i am currently downloading the I9100XXLPJ_I9100XXLPJ Open Europe 4.0.3, will this be ok and also anything that i need to worry about the kernel?
Thanks a lot for all the help.
atifsh said:
forget about csc.
if you have i9100 you can flash any region ROM and use in any country.
if you want Gb than go for la2 italy rom , iv used that and last time i check that was the fastest stock rom for GB
you can also flash ICS rom like uk lp7 too, just stay away from lp9 roms at the moment.
ad dont forget to wipe using the dialpad code *2767*3855#. [will wipe all data stored]
Click to expand...
Click to collapse
@ Atif
any specific reason to stay away from LP9???
I am using VK rom with LP9, working very smoother than the Omega which I tried few days back which was on LP8...
---------- Post added at 01:11 PM ---------- Previous post was at 01:02 PM ----------
letscheckitout said:
Hey Atifsh,
Thanks for the quick reply.
i am currently downloading the I9100XXLPJ_I9100XXLPJ Open Europe 4.0.3, will this be ok and also anything that i need to worry about the kernel?
Thanks a lot for all the help.
Click to expand...
Click to collapse
My friend dont go for LPJ that is unofficial beta release,
go for anything above LPQ on the sammobile firmware list ...
or pick anyone from here : http://forum.xda-developers.com/showthread.php?t=1544487.
Thank you Zac and Atif.
I have tried to do a factory rest from the phone's privacy menu but even after everything is done,istill see some files in the gallery.
i tried the code *2767*3855# everything goes fine but i see the message "cant access to system\csc\h3g\system\" and then the phone strats as normal.
can i flash it to the OS even if i am getting this message using odin or do i need to
do something before i flash?
factory reset will not delete your user stored data on the SD card...that can be manually deleted...if you want
you can flash the OS from ODIN
thanks for the responses.
I have upgraded to I9100XWLP7_I9100XEULP, and its working fine. the only problem seems to be its heating a bit where the camera is located . will read more topics and see why this is happening.
thank You.
letscheckitout said:
thanks for the responses.
I have upgraded to I9100XWLP7_I9100XEULP, and its working fine. the only problem seems to be its heating a bit where the camera is located . will read more topics and see why this is happening.
thank You.
Click to expand...
Click to collapse
You have to flash some other modem, I flashed my old GB modem and no heat issues.
Sent from my GT-I9100
ZACQ8 said:
@ Atif
any specific reason to stay away from LP9???
I am using VK rom with LP9, working very smoother than the Omega which I tried few days back .
Click to expand...
Click to collapse
Yes though the newer dxlp9 was much better, previous one had bunch of issues including sleep of death.
Also that ROM introduces the contact/dialer lag bug. Which some how got to Google account and now every time I sync contacts it get back.
I deleted all my contacts and synced again and it's all better, tried on dxlp9 and was working fine, than I switched to my regular cm9.
Sent from my GT-I9100
atifsh said:
You have to flash some other modem, I flashed my old GB modem and no heat issues.
Sent from my GT-I9100
Click to expand...
Click to collapse
Hey Atif,
really not sure which modem to flash, do we have info on that.
thanks
letscheckitout said:
Hey Atif,
really not sure which modem to flash, do we have info on that.
thanks
Click to expand...
Click to collapse
For a start, if you remember your last ROM that doesn't had heat issues, flash that modem. Doesn't matter if you use GB modem on ics.
I flashed the modem of my region xxki4 which is 2.3.5 jpkj2 and had no issues of heat in ics.
Sent from my GT-I9100
Sent from my GT-I9100
atifsh said:
For a start, if you remember your last ROM that doesn't had heat issues, flash that modem. Doesn't matter if you use GB modem on ics.
I flashed the modem of my region xxki4 which is 2.3.5 jpkj2 and had no issues of heat in ics.
Sent from my GT-I9100
Click to expand...
Click to collapse
I got this device 3 days ago on the first day did not had much time to experiment or use it and the second day flashed it
Dont know if the issue existed in the old modem too.. btw is there any good modem that you can refer to which i can install on, i am in india, i hope i willl not have any signal issue on mobile or on wifi if i install this new modem.
thanks
Let zaqc8 to reply that, wait for him or any other user in India.
I can only tell you to flash GB/ics modem that belongs to Indian region
Sent from my GT-I9100
Hello,
I recently got a gift from a friend in the form of a Samsung Galaxy S2.
Last time I've owned a samsung phone was before the smartphone era, however I am familiar with other smartphones running android.
This phone, has the following info:
Android Version: 2.3.5.
Baseband Version: I9100XXKI4
Kernel Version: 2.6.35.7-I9100XWKI8-CL616395 [email protected] #2
Build Number: GINGERBREAD.XWKI8
Kies Info --> PDA:KI8 / PHONE:KI4 / CSC:KI2 (ODK)
If I try to update with Kies it says that my device's current firmware is not supported to update via Kies.
From what I've researched, the region code at the end (ODK) means that the phone was originally purchased in Sweden. Will that be a problem?
As far as I know the phone was not locked when I got it since I'm using a different carrier in a different country.
I tried to look up codes for Galaxy S2 that can tell me if the phone has a locked bootloader, if it can be unlocked, etc, but without any success.
So my questions are the following:
1. How can I update the phone to the most recent samsung firmware?
2. I know that official firmware comes with a lot of bloatware and I wish to get rid of it, and for that I need root, how do you do it on a samsung?
(i have no idea where to begin since my last phone's software/steps followed seem to be completely different)
3. Is there a way to change the firmware/region code or whatever to the country I'm currently residing in?
and last but not least, any suggestions on what I should do?
Cheers and thanks.
justinhd said:
1. How can I update the phone to the most recent samsung firmware?
2. I know that official firmware comes with a lot of bloatware and I wish to get rid of it, and for that I need root, how do you do it on a samsung?
(i have no idea where to begin since my last phone's software/steps followed seem to be completely different)
3. Is there a way to change the firmware/region code or whatever to the country I'm currently residing in?
and last but not least, any suggestions on what I should do?
Cheers and thanks.
Click to expand...
Click to collapse
1. Afaik Kies will only update if you are using the stock firmware from the country you are connecting from. Custom firmwares will not work. The easiest way to flash the latest stock firmware is via Odin.
2. Install a kernel that roots your phone like Siyah or Dorimanx.
3. Search for threads in XDA about how to change your CRC.
Hello Megaritis,
Thank you for your reply.
Regarding the CRC, I need to change it to the country i'm residing in only if I plan on updating my phone via Kies, right?
I'm not planning on flashin JB just yet because i think it still needs some polishing. I want to flash an official ICS ROM on Siyah's Kernel.
My current to do is:
1. Get Odin, and flash the new kernel.
2. Get an official ICS ROM and flash it.
3. Get Titanium Backup and remove the bloatware if any.
4. Use the phone.
Anything else I should do / know?
Soo...here is where I am so far:
1. Downloaded SiyahKernel v5.0.1.
2. Downloaded PDA and CSC firmware for the country I reside in (from SamMobile.com).
Whats next? Stick them all into Odin and hope for the best?
PDA -> PDA
CSC -> CSC
PHONE -> SiyahKernel
???
justinhd said:
Soo...here is where I am so far:
1. Downloaded SiyahKernel v5.0.1.
2. Downloaded PDA and CSC firmware for the country I reside in (from SamMobile.com).
Whats next? Stick them all into Odin and hope for the best?
PDA -> PDA
CSC -> CSC
PHONE -> SiyahKernel
???
Click to expand...
Click to collapse
Instead of doing all this together I suggest you just flash neat rom Lite (ics version, the latest v4 is JB) its the stock firmware with every bloatware removed and it is pre-rooted. Even v4 is pretty much stable and cool too as it is based on the leaked stock JB.
And several flashable addon are also available for it.
And If you are going to proceed with what you downloaded, flash Siyah after flashing the stock firmware.
Also before you proceed I suggest you check for brick bug, which can potentially superbrick your phone, Stock ICS 4.0.4 Kernel contains the problematic command, if you are effected, never perform any wipe or erase or reset with the stock kernel, just flash Siyah before doing all that.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Could you post a small walkthrough on how I do that?
EDIT: My current android version is 2.3.5. and I plan to flash 4.0.3. stock and then remove bloatware.
This is the link to the post with detailed instructions
http://forum.xda-developers.com/showthread.php?t=1569686
Remember "neat rom Lite" is suggested not just "neat rom" , and read the forum and instructions carefully.
NeatROM v3 is ICS I guess. And it contains v3 Siyah just flash the newest (which you downloaded) one if you feel like it(it's pretty much better)
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
This is the link to the post with detailed instructions
http://forum.xda-developers.com/showthread.php?t=1569686
Remember "neat rom Lite" is suggested not just "neat rom" , and read the forum and instructions carefully.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 07:51 AM ---------- Previous post was at 07:50 AM ----------
NeatROM v3 is ICS I guess.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
And how do i check for that brick bug?
justinhd said:
And how do i check for that brick bug?
Click to expand...
Click to collapse
There is an app called eMMc check in play store, but you don't need to worry if you're flashing a custom rom only the stock 4.0.4 has it.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
There is an app called eMMc check in play store, but you don't need to worry if you're flashing a custom rom only the stock 4.0.4 has it.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
Right.
I flashed CF-Root in order to root the current os.
Now, I wanna flash to 4.0.3. first. I downloaded an archive with a tar from sammobile.com from a carrier in my country.
How do I aproach this?
I put the .tar i downloaded in PDA in ODIN, and flash that first, and then put the Siyah tar in the PHONE field in ODIN and flash that second?
So long story short if you want to perform a factory reset,wipe do it from a kernel that is deemed safe like Siyah latest (v5.0.1 I guess).
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:07 AM ---------- Previous post was at 08:03 AM ----------
justinhd said:
Right.
I flashed CF-Root in order to root the current os.
Now, I wanna flash to 4.0.3. first. I downloaded an archive with a tar from sammobile.com from a carrier in my country.
How do I aproach this?
I put the .tar i downloaded in PDA in ODIN, and flash that first, and then put the Siyah tar in the PHONE field in ODIN and flash that second?
Click to expand...
Click to collapse
Siyah must be flashed later again via PDA.
Edit : Don't flash it via phone, it should be done via PDA.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
So long story short if you want to perform a factory reset,wipe do it from a kernel that is deemed safe like Siyah latest (v5.0.1 I guess).
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:07 AM ---------- Previous post was at 08:03 AM ----------
Siyah must be flashed later again via PDA.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
I get what you're saying, both files go into PDA and they get flashed separatly, Siyah being the second in line.
But I have the following problem, or do i?
My current kernel is XWKI8 and as far as I know you can't flash different CSC/FIRMWARE if its not compatible with the kernel.
justinhd said:
I get what you're saying, both files go into PDA and they get flashed separatly, Siyah being the second in line.
But I have the following problem, or do i?
My current kernel is XWKI8 and as far as I know you can't flash different CSC/FIRMWARE if its not compatible with the kernel.
Click to expand...
Click to collapse
Yes, so flash Siyah first, then the rest.
When I was referring to flashing Siyah I meant updating it, but if you have an incompatible kernel you must flash siyah first.
But if you are flashing a stock firmware (not tampered with) the kernel doesn't matter as the PDA file contains it and will overwrite the existing one with a compatible one.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
Yes, so flash Siyah first, then the rest.
When I was referring to flashing Siyah I meant updating it, but if you have an incompatible kernel you must flash siyah first.
But if you are flashing a stock firmware (not tampered with) the kernel doesn't matter as the PDA file contains it and will overwrite the existing one with a compatible one.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
Agreed, I raised the problem only because sammobile.com's info on the file i downloaded doesn't list a kernel and I assumed that it only contains the PDA and CSC.
So if you are flashing with tar files you most probably don't need to worry about kernel, for example in neat rom Lite v3 it includes Siyah v3, but in case of flashing zip files you need a compatible kernel before hand.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:22 AM ---------- Previous post was at 08:20 AM ----------
In some cases PDA file won't contain kernel in such a package the kernel will be given separately, like the CSC file.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:30 AM ---------- Previous post was at 08:22 AM ----------
Bro just make sure what kind of file do you have? A zip or a tar? Flashing a zip(it's done via CWM) - - >compatible kernel required
Flashing a tar(via Odin) - - >if kernel included nothing to worry just flash.
peace
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Hmm, I think the .tar file does contain everything needed, even though i flashed siyah first....
I guess i'll have to re-flash it after its done.
By the way, any idea how I remove those flash counts?
justinhd said:
Hmm, I think the .tar file does contain everything needed, even though i flashed siyah first....
I guess i'll have to re-flash it after its done.
By the way, any idea how I remove those flash counts?
Click to expand...
Click to collapse
Usb jig is your hardware and easiest option you can get it from eBay, or since you are using ICS, triangle away by chainfire will do the trick you can get it for free from his forum or you can buy him a beer and buy it from the play store.
Triangle Away is pretty easy too... Lol
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Okay so its done. For some reason the android version is indeed 4.0.4 but the phone is okay, i downloaded that app and it states that the chip is ok and again, for some other reason, its still rooted, i don't know if the tar i had contained a kernel or not, but its all good now. I HOPE.
EDIT: Wops....spoke too soon, i saw the superuser app on my home screen and I assumed its rooted, but its not. Gotta re-flash siyah's kernel now.
justinhd said:
Okay so its done. For some reason the android version is indeed 4.0.4 but the phone is okay, i downloaded that app and it states that the chip is ok and again, for some other reason, its still rooted, i don't know if the tar i had contained a kernel or not, but its all good now. I HOPE.
EDIT: Wops....spoke too soon, i saw the superuser app on my home screen and I assumed its rooted, but its not. Gotta re-flash siyah's kernel now.
Click to expand...
Click to collapse
Good work.. And lol.. Many has done that mistake and the cry about it in the forums.. Lol..
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
Good work.. And lol.. Many has done that mistake and the cry about it in the forums.. Lol..
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
Well, I flashed the kernel but now titanium backup is stuck at Searching Application Data, but it did prompt me for root priviledges... :|
EDIT: Meh...it was probably stuck because it was trying to access the SD card but my cable was still plugged in....fixed.
Now, i have one last question for the night: now i have 2 "root" apps in my homescreen, one is superuser and the other is supersu, judging by the fact that the "superuser" one was there when I first booted, I suspect that its useless and the supersu is the one with the root. How do I remove it?