Related
I want to root my sgs 2. Before doing that, i want to dump the currently stock rom so that i will be able to use odin to revert back afterwards if i need to.
How do i do that (no root/busybox/etc installed yet...pure stock)?
ardealul said:
I want to root my sgs 2. Before doing that, i want to dump the currently stock rom so that i will be able to use odin to revert back afterwards if i need to.
How do i do that (no root/busybox/etc installed yet...pure stock)?
Click to expand...
Click to collapse
Tell us versions and country and carrier.
It will already be posted by Intratech in one of his threads
hei, I need to know the answer too.
i have pure stock now..
XWKF1
pulser_g2 said:
Tell us versions and country and carrier.
It will already be posted by Intratech in one of his threads
Click to expand...
Click to collapse
i found the dumps created by intratech and my version/carrier is there but i want to know how to dump it myself so that i am 100% sure that i revert to the exact rom/partitioning/etc
Up!
I have the same need.
ardealul said:
i found the dumps created by intratech and my version/carrier is there but i want to know how to dump it myself so that i am 100% sure that i revert to the exact rom/partitioning/etc
Click to expand...
Click to collapse
Intratech *only* posts official firmware versions, so you should not encounter any problems if you download/save/re-flash the firmware he's uploaded (that matches your original firmware CSC, kernel, etc).
Also, you don't want to mess with the partition when you flash a firmware using Odin. The instructions Intratech has provided are detailed but easy enough to follow for a beginner.
ardealul said:
I want to root my sgs 2. Before doing that, i want to dump the currently stock rom so that i will be able to use odin to revert back afterwards if i need to.
How do i do that (no root/busybox/etc installed yet...pure stock)?
Click to expand...
Click to collapse
I would like to know this as well because Intratech was not able to find a version of my stock ROM yet.
I would like to know how as well. Would like to "backup" the stock version before rooting with VR as I just got my SGS2 tonight
These are my phone's firmware:
PDA: I9100XWKF1
MODEM/PHONE: I9100DXKF1
CSC: I9100OLBKE5
I saw intratech's thread and there is the stock firmware for XWKF1 but the version for the MODEM and CSC are different from mine. Hope to create an exact backup before rooting.
Appreciate any advice. Thank you.
desean said:
I would like to know how as well. Would like to "backup" the stock version before rooting with VR as I just got my SGS2 tonight
These are my phone's firmware:
PDA: I9100XWKF1
MODEM/PHONE: I9100DXKF1
CSC: I9100OLBKE5
I saw intratech's thread and there is the stock firmware for XWKF1 but the version for the MODEM and CSC are different from mine. Hope to create an exact backup before rooting.
Appreciate any advice. Thank you.
Click to expand...
Click to collapse
You can find your firmware on Samfirmware.com. Anyway, this is your stock firmware.
So i take it no one knows how to make a dump of the stock ROM? As i would really like to know how to do this myself as well.
I had a look at Intratech's thread, and found a matching ROM of mine but i don't know which CSC version to get?
Mine says I9100YOGKE1, and there is no CSC there with YOG at all, even under different ROMS.
*confused*
you can use odin to make a dump of your rom, bottom right corner is the dump button.
desean said:
I would like to know how as well. Would like to "backup" the stock version before rooting with VR as I just got my SGS2 tonight
These are my phone's firmware:
PDA: I9100XWKF1
MODEM/PHONE: I9100DXKF1
CSC: I9100OLBKE5
I saw intratech's thread and there is the stock firmware for XWKF1 but the version for the MODEM and CSC are different from mine. Hope to create an exact backup before rooting.
Appreciate any advice. Thank you.
Click to expand...
Click to collapse
It's there though and has been there for a while. It's even on it's own under XWKF1: http://www.multiupload.com/U95BI5QVDL
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
djyoshii said:
So i take it no one knows how to make a dump of the stock ROM? As i would really like to know how to do this myself as well.
I had a look at Intratech's thread, and found a matching ROM of mine but i don't know which CSC version to get?
Mine says I9100YOGKE1, and there is no CSC there with YOG at all, even under different ROMS.
*confused*
Click to expand...
Click to collapse
It's there now.
I used Nandroid from the CWM kernel to backup my ROM. The reason I used the plain CWM kernel is because it would not affect any of the files on my ROM (as it is not pre-rooted like the CF-root kernel so it won't add any symlinks or excutables) and after restoring the backup, I can just flash the original kernel again. By doing that it will be stock again. Oh, and I have a jig to reset the counter.
I want to root my phone. I have been reading alot of tutorials and posts made here in the forum. Now I think I know enough to root the phone. I am just confused about one little thing; can I flash any cf-root kernal to my phone or I need specific. Help me in choosing the kernal from Hellcat's one.
I downloaded XXKI4 from Hellcat's page but I am not sure. Which CF-root kernal should I flash?
This is my phone details according to Kies:
PDA: KJ2
PHONE: KI1
CSC: KJ1 (XSG)
2.3.5 (Updates from Kies)
Click to expand...
Click to collapse
I had it updated using Kies. I want to know whether I can use any sg2 kernal on my phone or I have to be specific according to my phone details? I think I screwed up big time rooting by installing those updates..
This is the phone status picture taken:
http://imgur.com/0Kybt
cf-root kernel first mate...
First of all, you have to flash a cf-root kernel with odin using a .tar file. Then you can flash the kernel you want, if it is compatible with your rom. Usually, this is said in kernel thread.. Hope this helps!!
pHraiL^ said:
I want to root my phone. I have been reading alot of tutorials and posts made here in the forum. Now I think I know enough to root the phone. I am just confused about one little thing; can I flash any cf-root kernal to my phone or I need specific. Help me in choosing the kernal from Hellcat's one.
I downloaded XXKI4 from Hellcat's page but I am not sure. Which CF-root kernal should I flash?
This is my phone details according to Kies:
I had it updated using Kies. I want to know whether I can use any sg2 kernal on my phone or I have to be specific according to my phone details? I think I screwed up big time rooting by installing those updates..
This is the phone status picture taken:
http://imgur.com/0Kybt
Click to expand...
Click to collapse
You should read Chainfire's CF-Root thread and use CF-Root kernel for XWKJ2 in 7. post => http://forum.xda-developers.com/showthread.php?t=1103399&highlight=CF+Root
Good luck !
Flash using the cf-root that matches your stock/current kernel, make a cwm backup, then you can change to whatever Rom you fancy. Me personally i just rooted and removed all the Orange crap and tried a couple of Roms but in the end the phone is that good im happy with rooted stock so restored my backup
Sent from my GT-I9100 using XDA App
I give up -- I thought I know enough to safely root my phone but it's hard =D. New things keeps coming up..
I just wanted someone to pin point me that this is the cf-root you should be using for your phone details as it is the best for you and with that you can easily install other custom ROMs (I want sensation one) and gain root access ofcourse.
Nevermind, I will keep doing the homework until I crack it up!
ANY help is still appreciated because I have files ready..
pHraiL^ said:
I want to root my phone. I have been reading alot of tutorials and posts made here in the forum. Now I think I know enough to root the phone. I am just confused about one little thing; can I flash any cf-root kernal to my phone or I need specific. Help me in choosing the kernal from Hellcat's one.
I downloaded XXKI4 from Hellcat's page but I am not sure. Which CF-root kernal should I flash?
This is my phone details according to Kies:
I had it updated using Kies. I want to know whether I can use any sg2 kernal on my phone or I have to be specific according to my phone details? I think I screwed up big time rooting by installing those updates..
This is the phone status picture taken:
http://imgur.com/0Kybt
Click to expand...
Click to collapse
Hi i read up on rooting my S2 on this website and youtube and i was confident that i could do it, they all made it sound and look easy.
I went ahead and flashed my Kernel (XWKF3) using ODIN 1.85 and it went through process said successful and rebooted as said but soon as the first black screen comes on saying "SAMSUNG GALAXY S2 GTI9100" it just stays on this screen and nothing else happens.
It is therefore Semi-Bricked, i have tried several kernels and firmware and then it totally bricks, thou lucky i bought a usb jig that puts it back into download mode.
My advice is to be 100% sure and do a lot of research before proceeding and if anyone got an idea what i can do to get my phone working again please let me know
If you chose to use Hellcat's Kernel, then you don't need CF-ROOT Kernel.
HellcatDroid said:
Features
Root
Kernel comes "instant rooted", after flashing this kernel your system is completely rooted (su, busybox and the Superuser app).
Nothing more needs to be done, totally newb friendly
Click to expand...
Click to collapse
Just download the Kernel that matches your current Kernel version.
To find out what Kernel you are using, Settings -> About
Else you can just go to Dialer, then *#1234#
The PDA version is also your Kernel Version.
Run ODIN, select the hellcat kernel *.tar file under PDA, then start.
DO NOT REPARTITION
DO NOT ERASE EFS
You say PDA version is your kernal version, it means KJ2 is my kernal version. I can't find the match for this kernal on hellcat's page. Though my Baseband version in 'about' shows XXKI4. Since it's matches the kernal on Hellcat's page, I thought this is the kernal version.
So now I have to find a kernal version for my PDA version? And what is the difference between cf-root and the hellcat's kernals?
Thanks.
pHraiL^ said:
You say PDA version is your kernal version, it means KJ2 is my kernal version. I can't find the match for this kernal on hellcat's page. Though my Baseband version in 'about' shows XXKI4. Since it's matches the kernal on Hellcat's page, I thought this is the kernal version.
So now I have to find a kernal version for my PDA version? And what is the difference between cf-root and the hellcat's kernals?
Thanks.
Click to expand...
Click to collapse
my advice to you, being a 2 months old newbie myself, is to read for a few days around XDA. you can learn alot and make sure you don't mess things up.
and get yourself a JIG off ebay ASAP. It's like 2 bucks, and it's worth it.
I myself, flashed CF-Root-SGS2_XX_OXA_KH1-v4.1-CWM4 on my SII and than plugged JIG to get rid off the yellow triangle. It was easy. For now I'm running like that on stock to get familiar in android cos this new to me (former iPhone user). After a "test/learning" mode I'll probably flash Galnet MIUI.
my version of device is:
android version 2.3.3
baseband version I9100xxkg5
Kernel version 2.6.35.7-I9100jpkh1-cl453266 [email protected]dell140 #2
build number gingerbread.jpkh1
and that's why I flashed the "KH1" version cos I'm still unsure the other "close/similar" versions I can flash on my device.
If there is an exact version of CF-Root for your version flash that one and follow CFs instructions on the first page of his thread (http://forum.xda-developers.com/showthread.php?t=1103399).
hope this helps. If you have any other specific questions ask here and if I now the answer, I'll help.
cheers.
pHraiL^ said:
I give up -- I thought I know enough to safely root my phone but it's hard =D. New things keeps coming up..
I just wanted someone to pin point me that this is the cf-root you should be using for your phone details as it is the best for you and with that you can easily install other custom ROMs (I want sensation one) and gain root access ofcourse.
Nevermind, I will keep doing the homework until I crack it up!
ANY help is still appreciated because I have files ready..
Click to expand...
Click to collapse
I have only ever used CF-Root for rooting so I can't comment on Hellcat etc but what I can say is that all the information required for CF-Root is in Chainfire's thread http://forum.xda-developers.com/showthread.php?t=1103399
It specifically states how to find out which file to use at the bottom of the very 1st post.
I was totally new to all this rooting and flashing firmware business until I found the XDA forum and I can only speak from personal experience but I have found that as long as you read, read then read again and follow the instuctions to the absolute letter you shouldn't have any difficulties.
Thanks for the tip man but I can't find cf-root KJ2 for my phone. I tried searching and failed. I'll keep looking.
Ive rooted my phone via odin. Flashed cf root kernel kf1 to remove the yellow triangle. But as i was about to flash the rom using cwm recovery mode, its opening up to a "manual mode", hence i cant flash the roms. Any ideas what might cause this?
I have rooted my SGS2 (xwkg1). I didn't know the first thing about it, and found this forum to be the best of knowledge for playing around with my phone.
If you research enough you will find the right post showing a step by step way to root your phone (so easy) and flash ROMs. I am ready to play the ROM game now..
Follow these steps..
http://forum.xda-developers.com/showthread.php?t=1125414
Just make sure you get the right kernel for your particular phone.
If you want noob steps. Let me know..
---------- Post added at 03:31 PM ---------- Previous post was at 03:15 PM ----------
Find your kernels here (Special thanks to Odia)
http://forum.xda-developers.com/showthread.php?t=1101671
I am confused in choosing the kernal for my phone. You see my baseband version shows XXKI4 which matches a kernal back there, it confuses me alot. But my kernal version shows JPKJ2, for which I can't find a kernal. Whole lot of confusion in choosing a matching kernal.. =(
Will GT-I9100_XWKJ2_insecure work for my kernel version JPKJ2?
And I found this kernel too; CF-Root-SGS2_XW_XEF_KJ2-v5.0-CWM5.zip
Chainfire said XW and the initial doesn't matters if it's KJ2. But mine's JPKJ2
----
It_ler said:
You can use CF-Root kernel for XW_XEF_KJ2 to root your ROM.
Please make a backup before flashing.
Click to expand...
Click to collapse
It_ler said:
There are several posts which say that CF-Root kernel XX_KI4 and XW_KI8 will work fine on JPKJ2.
So, use one of them to root your phone as long as Chainfire is absent.
As soon as he posts a CF-Root kernel for KJ2, you can easily flash this kernel over the "older" one.
Click to expand...
Click to collapse
Which one now?
http://forum.xda-developers.com/showpost.php?p=19013036&postcount=7
Please take time to read as:
Help! Which file do I use ?
Listen closely, for I will say zis only once!
Go to Settings -> About phone -> Kernel Version. Note the string present there:
2.6.35.7-I9100XXKG1-CL349526
What matters most (KG1) in this case, is in bold. Try to find the matching file under downloads:
CF-Root-SGS2_XX_OXA_KG1-v4.1-CWM4.zip
The XX and OXA identifiers are not that important. Usually a "KG1" kernel is a "KG1" kernel, and that is that. Sometimes (pretty rare) it happens there will be multiple different kernels with the same name in different firmwares, that are actually different. If this happens, they are usually only very minor changes and you should expect them to still be fully compatible. I include the "XX" and "OXA" identifiers so the very advanced users can deduce from which full firmware I have taken the kernel file.
Don't worry too much, just find the matching download and use it. What if there is no matching download ? You can ask me to make one, but I can tell you right now, I very very rarely make CF-Root's for kernels on request, unless it is the very latest kernel that has been released by Samsung. In the latter case, be sure to let me know. If there's no match and I'm not making one, try finding the closest match. You should treat "KG1" as a number, but instead of 1-9, we have 1-9, A-Z (where A would be 10, and Z would be 35). "KG2" is really close to "KG1", "KF1" is not close to "KG1" at all. I hope that makes sense.
Click to expand...
Click to collapse
Rather than creating a new thread the best option is to post in pre existing thread this provides you get help and if others in same situation can read answer to posts....
On that note thread closed.
Hello, Firstly i am sorry to ask as i know there is already a general topic on this in various posts, and i do have the basic jist...but i wanted to ask this so i can be CERTAIN that the info i get is correct for my setup.
So my SGS2 on Virgin mobile.....was rooted with Chainfires rooting method, then flashed with Villainrom.
Here are the infos as of now.
Android version : 2.3.4
Baseband: 19100XXKH3
Kernel: Ninphetamine 2.6.35
Villainrom 2.4.2
So basically i need to get the phone exactly how it was when it was new from the store, Unrooted and on the stock rom.
Please could somebody give me a short guide on how i can do this? i would really appreciate the help
Find carrier specific stock firmware here or if your carrier isn't listed, get country specific firmware here.
Follow the instructions & you shouldn't have any problems. If you need to return your phone for warranty service, do a factory reset & use a jig to reset the flash counter.
Baz-L said:
Hello, Firstly i am sorry to ask as i know there is already a general topic on this in various posts, and i do have the basic jist...but i wanted to ask this so i can be CERTAIN that the info i get is correct for my setup.
So my SGS2 on Virgin mobile.....was rooted with Chainfires rooting method, then flashed with Villainrom.
Here are the infos as of now.
Android version : 2.3.4
Baseband: 19100XXKH3
Kernel: Ninphetamine 2.6.35
Villainrom 2.4.2
So basically i need to get the phone exactly how it was when it was new from the store, Unrooted and on the stock rom.
Please could somebody give me a short guide on how i can do this? i would really appreciate the help
Click to expand...
Click to collapse
Baz-L said:
Hello, Firstly i am sorry to ask as i know there is already a general topic on this in various posts, and i do have the basic jist...but i wanted to ask this so i can be CERTAIN that the info i get is correct for my setup.
So my SGS2 on Virgin mobile.....was rooted with Chainfires rooting method, then flashed with Villainrom.
Here are the infos as of now.
Android version : 2.3.4
Baseband: 19100XXKH3
Kernel: Ninphetamine 2.6.35
Villainrom 2.4.2
So basically i need to get the phone exactly how it was when it was new from the store, Unrooted and on the stock rom.
Please could somebody give me a short guide on how i can do this? i would really appreciate the help
Click to expand...
Click to collapse
Do wipe data/cache from CWM recovery,wipe dalvik cache and flash the Stock ROM ( version that came wtih your phone ) from Intratech thread via odin.
Your phone will be in stock condition.
hope this helps!
MistahBungle said:
Find carrier specific stock firmware here or if your carrier isn't listed, get country specific firmware here.
Follow the instructions & you shouldn't have any problems. If you need to return your phone for warranty service, do a factory reset & use a jig to reset the flash counter.
Click to expand...
Click to collapse
Thanks for the reply, but im still a bit confused as to which firmware is the correct one?
The first link has my carrier (Virgin) but only 2 downloads for it...Austrailia and Canada. Im in the UK.
again im sorry for being nooby, but all these different downloads confuse me and i dont want to mess this up, also i have a jig to reset the counter, thx again for your help!
ksantoshh said:
Do wipe data/cache from CWM recovery,wipe dalvik cache and flash the Stock ROM ( version that came wtih your phone ) from Intratech thread via odin.
Your phone will be in stock condition.
hope this helps!
Click to expand...
Click to collapse
Thankyou for your reply and help, but im not sure which version came with my phone
Is there a way to find this out?
XWKI4 - XEU(UK) seems to be the best choice. I've also checked with CheckFus to see if there's a Virgin specific rom available (there isn't).
At the end of the day, you void your warranty the moment you flash non-stock firmware.
In saying that, as long as you re-flash stock firmware, do a factory reset to get rid of any apps that might tip off whomever fixes your phone that you've rooted it, and use a jig to reset the counter, you more than likely won't have any problems with warranty service.
If you're looking for 100% absolute guarantees of this, there aren't any.
Baz-L said:
Thanks for the reply, but im still a bit confused as to which firmware is the correct one?
The first link has my carrier (Virgin) but only 2 downloads for it...Austrailia and Canada. Im in the UK.
again im sorry for being nooby, but all these different downloads confuse me and i dont want to mess this up, also i have a jig to reset the counter, thx again for your help!
Click to expand...
Click to collapse
---------- Post added at 11:31 PM ---------- Previous post was at 11:31 PM ----------
Yup :-/
BigMrB said:
ANOTHER thread about this.... wow
Click to expand...
Click to collapse
Hello everybody,
I'm going to install a new ROM - it was advised to me frankstain XWLA4 ROM - and I still have some question about installing that ROM:
1- which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
2-Is it "safe" to install frankstain XWLA4 ROM? Would I have errors on my Samsung Galaxy S2?
3- how can I wipe my device (to clean all Vodafone ES "rubbish")? Should I do the wipe before or after installing the ROM and flashing my device?
4- By installing Stock ROM and CF-root I won't change the kernel right?
Thanks.
yellow simbol is not error. u get it when u put custom rom. but u can move it. chainfire make app for that.
Sent from my GT-I9100 using XDA App
In fact my main question is: which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
The others I think I know the answer but this question is essencial so I can start to install the new Firmware.
LA4 is very stable I've been running it for the last two days with no problems. If you flash a CF kernel you will have a different kernel but it will be as close to stock as possible just with a couple of extra features. You can down load the the original firmware/kernel from intratechs thread. All you need to do is flash a frankesten LA4 from intratech, it's all in one so you just use pda in odin.
Sent from my GT-I9100 using Tapatalk
Thanks man but I don't know what's LA4 ROM... and a buddy of our on anoher thread recommended me frankstain XWLA4 ROM and so I would like to install it.
For example, in this case:
"XWLA4
Android 2.3.6
There is no carrier branding
This package has: PDA: XWLA4| Modem/phone: XXKI3| CSC: XEUKH2
Download: http://uploadmirrors.com/download/3V...I9100XEUKH2.7z
XWLA4 Stock Kernel: http://uploadmirrors.com/download/0M..._I9100XWLA4.7z
Password: [email protected]
"
What should I install first? Kernel or the firmware? And where do I put Kernel on Odin?
Thanks.
marcadam said:
LA4 is very stable I've been running it for the last two days with no problems. If you flash a CF kernel you will have a different kernel but it will be as close to stock as possible just with a couple of extra features. You can down load the the original firmware/kernel from intratechs thread. All you need to do is flash a frankesten LA4 from intratech, it's all in one so you just use pda in odin.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
diogogomes11 said:
1- which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
Click to expand...
Click to collapse
Most firmwares will have kernels included. Work with that for now.
diogogomes11 said:
2-Is it "safe" to install frankstain XWLA4 ROM? Would I have errors on my Samsung Galaxy S2?
Click to expand...
Click to collapse
Yes. Those "Frankenstein" packages are stock, except Intratech mixed and matched the PDA, CSC, and modems. They just won't get recognized by Kies as a valid updateable firmware because of this though.
diogogomes11 said:
3- how can I wipe my device (to clean all Vodafone ES "rubbish")? Should I do the wipe before or after installing the ROM and flashing my device?
Click to expand...
Click to collapse
Flash an unbranded stock firmware. Post #2 above the Frankenstein firmwares of the same thread. Or the Frankenstein ones. The only difference is the non-Frankenstein ones will probably be recognized by Kies as upgradeable, and the Frankenstein ones will probably not.
diogogomes11 said:
4- By installing Stock ROM and CF-root I won't change the kernel right?
Click to expand...
Click to collapse
Wrong. If you install just stock ROM, yes. CF-Root is a custom kernel, so if you install that, you ARE changing the kernel.
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
diogogomes11 said:
What should I install first? Kernel or the firmware? And where do I put Kernel on Odin?
Click to expand...
Click to collapse
As above, most if not all firmwares come with a kernel. If you want a custom kernel you must flash it AFTER you flash a firmware. Else if you flash a kernel first, then the firmware, then the firmware's kernel will overwrite the kernel you flashed first.
Kernels generally go in the PDA section of Odin.
EDIT: I think I see your confusion. You're wondering about the "stock kernel" link that's right below the firmware link. Right? Well that's there just in case you need it. For example, if you flashed a CF-Root kernel, and wanted to flash the stock kernel back. If you never end up flashing a non-stock kernel, then you won't need it. But I'd download it anyways, just in case you need it later.
diogogomes11 said:
Hello everybody,
I'm going to install a new ROM - it was advised to me frankstain XWLA4 ROM - and I still have some question about installing that ROM:
1- which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
2-Is it "safe" to install frankstain XWLA4 ROM? Would I have errors on my Samsung Galaxy S2?
3- how can I wipe my device (to clean all Vodafone ES "rubbish")? Should I do the wipe before or after installing the ROM and flashing my device?
4- By installing Stock ROM and CF-root I won't change the kernel right?
Thanks.
Click to expand...
Click to collapse
1.XWLA4 is 2.3.6 so if you want to install a ROM with this Firmware and you are already on 2.3.6 then you dont need to flash anything.Root and flash the ROM.You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM.
1A. A kernel goes in PDA in Odin.
2.Its safe to install any ROM as long as you follow the instuctions that the Dev provides.You will have problems if for example you are on,as I already mentioned,2.3.5 and flash a 2.3.6 ROM.Always flash a ROM thats compatable with your Firmware.Frankenstein has firmwares not ROMs.Developers have ROMs.
3.To get rid of carrier apps all you need to do is flash a Firmware or custom ROM.Thats all.After flashing a Firmware its a good idea to do a factory reset.
4.By installing a CF-Root kernel you are changing the stock kernel for a root kernel.Kies will still work with a stock Firmware and root kernel.Kies OTA updates will not work with a custom ROM nor updates via Kies.
You diserved many thanks man
EDIT: I think I understand what you're saying... As my actual firmware is 2.3.5 and I have a stock Kernel (I never touched it since I have my phone), I just have to install the 200MB file on Odin with the 2.3.6 firmware and that's ok?
ctomgee said:
Most firmwares will have kernels included. Work with that for now.
Yes. Those "Frankenstein" packages are stock, except Intratech mixed and matched the PDA, CSC, and modems. They just won't get recognized by Kies as a valid updateable firmware because of this though.
Flash an unbranded stock firmware. Post #2 above the Frankenstein firmwares of the same thread. Or the Frankenstein ones. The only difference is the non-Frankenstein ones will probably be recognized by Kies as upgradeable, and the Frankenstein ones will probably not.
Wrong. If you install just stock ROM, yes. CF-Root is a custom kernel, so if you install that, you ARE changing the kernel.
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
As above, most if not all firmwares come with a kernel. If you want a custom kernel you must flash it AFTER you flash a firmware. Else if you flash a kernel first, then the firmware, then the firmware's kernel will overwrite the kernel you flashed first.
Kernels generally go in the PDA section of Odin.
Click to expand...
Click to collapse
Good work man. You said "You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM"... So, in this case I have a Vodafone ES 2.3.5 ROM so before installing XWLA4 I have to install another 2.3.6 ROM? Is this it?
There is my info about the ROM I have:
PDA: I9100BU KJ3
PHONE:I9100BU KI1
CSC:I9100 ATLKI2
cooza said:
1.XWLA4 is 2.3.6 so if you want to install a ROM with this Firmware and you are already on 2.3.6 then you dont need to flash anything.Root and flash the ROM.You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM.
1A. A kernel goes in PDA in Odin.
2.Its safe to install any ROM as long as you follow the instuctions that the Dev provides.You will have problems if for example you are on,as I already mentioned,2.3.5 and flash a 2.3.6 ROM.Always flash a ROM thats compatable with your Firmware.Frankenstein has firmwares not ROMs.Developers have ROMs.
3.To get rid of carrier apps all you need to do is flash a Firmware or custom ROM.Thats all.After flashing a Firmware its a good idea to do a factory reset.
4.By installing a CF-Root kernel you are changing the stock kernel for a root kernel.Kies will still work with a stock Firmware and root kernel.Kies OTA updates will not work with a custom ROM nor updates via Kies.
Click to expand...
Click to collapse
diogogomes11 said:
You diserved many thanks man
Although, a friend of ours on xda said to me that XWLA4 is excellent firmware so I would like to install it, but I don't know what to install first on Odin, the Kernel or the 200MB ROM are you understanding?
Click to expand...
Click to collapse
*sigh*... I'm understanding. It's pretty clear you are not.
Please read the "Edit" portion of my post above again. You don't need to install the kernel at all. That kernel is the stock kernel. It is already in the ROM. The only reason it is linked separately is if you flashed a different, non-stock kernel, and later wanted to flash back to a stock kernel.
If you DO want to flash a custom kernel, then you will ALWAYS have to flash it AFTER you flash a ROM. Because the kernel that is included with the ROM will overwrite whatever kernel is on the phone.
Savvy?
EDIT: We must've been posting at the same time.
diogogomes11 said:
You diserved many thanks man
EDIT: I think I understand what you're saying... As my actual firmware is 2.3.5 and I have a stock Kernel (I never touched it since I have my phone), I just have to install the 200MB file on Odin with the 2.3.6 firmware and that's ok?
Click to expand...
Click to collapse
Yes.
Thanks man. Now I think I'm understanding too The other colleague said "You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM." So, if I want to install XWLA4 ROM I have to install another 2.3.6 first? I think that's my last main doubt ?
ctomgee said:
*sigh*... I'm understanding. It's pretty clear you are not.
Please read the "Edit" portion of my post above again. You don't need to install the kernel at all. That kernel is the stock kernel. It is already in the ROM. The only reason it is linked separately is if you flashed a different, non-stock kernel, and later wanted to flash back to a stock kernel.
If you DO want to flash a custom kernel, then you will ALWAYS have to flash it AFTER you flash a ROM. Because the kernel that is included with the ROM will overwrite whatever kernel is on the phone.
Savvy?
EDIT: We must've been posting at the same time.
Yes.
Click to expand...
Click to collapse
diogogomes11 said:
Thanks man. Now I think I'm understanding too The other colleague said "You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM." So, if I want to install XWLA4 ROM I have to install another 2.3.6 first? I think that's my last main doubt ?
Click to expand...
Click to collapse
Not if it's stock. Depends on what he was talking about. Some custom ROMs require you to be on the same base version (i.e. 2.3.6) before flashing them.
You should be able to flash the stock XWLA4 ROM right now, if you've not updated your phone at all yet.
The Frankenstein XWLA4 ROM too?
ctomgee said:
Not if it's stock. Depends on what he was talking about. Some custom ROMs require you to be on the same base version (i.e. 2.3.6) before flashing them.
You should be able to flash the stock XWLA4 ROM right now, if you've not updated your phone at all yet.
Click to expand...
Click to collapse
diogogomes11 said:
The Frankenstein XWLA4 ROM too?
Click to expand...
Click to collapse
Yes. As stated, the only difference on Intratech's official firmware thread between the fully stock ROMs and the Frankenstein ones is he mixed and matched CSC and modems with PDAs on the Frankenstein ones. While this doesn't necessarily affect the operation of the phone, it will keep Kies from recognizing it as an updateable phone.
OK. Thanks and sorry for sending a private message at some seconds ago about this theme but I wanted to flash my new ROM
If I can help you on another thing, I'm available.
Thanks all xda good useres like you guys.
ctomgee said:
Yes. As stated, the only difference on Intratech's official firmware thread between the fully stock ROMs and the Frankenstein ones is he mixed and matched CSC and modems with PDAs on the Frankenstein ones. While this doesn't necessarily affect the operation of the phone, it will keep Kies from recognizing it as an updateable phone.
Click to expand...
Click to collapse
diogogomes11 said:
OK. Thanks and sorry for sending a private message at some seconds ago about this theme but I wanted to flash my new ROM
If I can help you on another thing, I'm available.
Thanks all xda good useres like you guys.
Click to expand...
Click to collapse
PM ignored, then. Good luck.
I've already installed the firmware and have made root. All OK except that I do *#272*Device IMEI# with my IMEI in order to install my CSC and it always says ATL and doesn't let me write TPH and if I click on install with ATL letters it says it needs only 3 letters!
Can you help me on this situation?
Thanks again.
ctomgee said:
PM ignored, then. Good luck.
Click to expand...
Click to collapse
diogogomes11 said:
I've already installed the firmware and have made root. All OK except that I do *#272*Device IMEI# with my IMEI in order to install my CSC and it always says ATL and doesn't let me write TPH and if I click on install with ATL letters it says it needs only 3 letters!
Can you help me on this situation?
Thanks again.
Click to expand...
Click to collapse
I have no clue what you're talking about. So I can't help you, sorry.
EDIT: what are you trying to do, exactly?
Look at this topic: http://forum.xda-developers.com/showthread.php?t=1075278
On Frankenstein Firmware's it says:
"For MultiCSC packages you can change between csc by typing *#272*Device IMEI# into the dial pad and selecting the csc of your choice and press install. It will reset the device."
So I installed a Frankenstein firmware and to install my country CSC - Portugal - I have to do something else right? So I've done *#272*Device IMEI# in order to install my CSC and it always shows "ATL" and doesn't let me write "TPH" - the letters for my country - and if I click on install with "ATL" letters it says it needs only 3 letters!
I want to install my CSC so I can browse the Web and receive MMS on my Samsung Galaxy S2.
Thanks again.
ctomgee said:
I have no clue what you're talking about. So I can't help you, sorry.
EDIT: what are you trying to do, exactly?
Click to expand...
Click to collapse
That will work if you have a multi CSC pack and the Firmware that you have installed does not.You cant type in your CSC,you have to select it from the list.Not all Frankenstein Firmwares have multi-CSC packs thats why at the bottom of the page there is a list of other CSCs to flash at your own choice.If you look at the Firmware you have flashed to your phone (XWLA4) it clearly states "CSC: XEUKH2" which is for the Great Britian region.At the moment the links are down so you cant download any CSC packs so the only way to get your countries correct CSC is to flash a custom ROM that has a multi-CSC pack built in like I did.As for the ATL question...you said that you had an S2 from spain,correct?!..well ATL is the product code for Vodafone Spain.
EDIT:you can browse the web on another countries CSC although it may not be as good and MMS settings are provider set.You could flash XWKK(2.3.6) which has a CSC pack for the Netherlands but normally also a KOR one too.The KOR(KOREA) CSC works fine for Spain and Portugal.I would suggest a custom ROM to get the best out of your phone.There are a lot around.
Hello,
I recently got a gift from a friend in the form of a Samsung Galaxy S2.
Last time I've owned a samsung phone was before the smartphone era, however I am familiar with other smartphones running android.
This phone, has the following info:
Android Version: 2.3.5.
Baseband Version: I9100XXKI4
Kernel Version: 2.6.35.7-I9100XWKI8-CL616395 [email protected] #2
Build Number: GINGERBREAD.XWKI8
Kies Info --> PDA:KI8 / PHONE:KI4 / CSC:KI2 (ODK)
If I try to update with Kies it says that my device's current firmware is not supported to update via Kies.
From what I've researched, the region code at the end (ODK) means that the phone was originally purchased in Sweden. Will that be a problem?
As far as I know the phone was not locked when I got it since I'm using a different carrier in a different country.
I tried to look up codes for Galaxy S2 that can tell me if the phone has a locked bootloader, if it can be unlocked, etc, but without any success.
So my questions are the following:
1. How can I update the phone to the most recent samsung firmware?
2. I know that official firmware comes with a lot of bloatware and I wish to get rid of it, and for that I need root, how do you do it on a samsung?
(i have no idea where to begin since my last phone's software/steps followed seem to be completely different)
3. Is there a way to change the firmware/region code or whatever to the country I'm currently residing in?
and last but not least, any suggestions on what I should do?
Cheers and thanks.
justinhd said:
1. How can I update the phone to the most recent samsung firmware?
2. I know that official firmware comes with a lot of bloatware and I wish to get rid of it, and for that I need root, how do you do it on a samsung?
(i have no idea where to begin since my last phone's software/steps followed seem to be completely different)
3. Is there a way to change the firmware/region code or whatever to the country I'm currently residing in?
and last but not least, any suggestions on what I should do?
Cheers and thanks.
Click to expand...
Click to collapse
1. Afaik Kies will only update if you are using the stock firmware from the country you are connecting from. Custom firmwares will not work. The easiest way to flash the latest stock firmware is via Odin.
2. Install a kernel that roots your phone like Siyah or Dorimanx.
3. Search for threads in XDA about how to change your CRC.
Hello Megaritis,
Thank you for your reply.
Regarding the CRC, I need to change it to the country i'm residing in only if I plan on updating my phone via Kies, right?
I'm not planning on flashin JB just yet because i think it still needs some polishing. I want to flash an official ICS ROM on Siyah's Kernel.
My current to do is:
1. Get Odin, and flash the new kernel.
2. Get an official ICS ROM and flash it.
3. Get Titanium Backup and remove the bloatware if any.
4. Use the phone.
Anything else I should do / know?
Soo...here is where I am so far:
1. Downloaded SiyahKernel v5.0.1.
2. Downloaded PDA and CSC firmware for the country I reside in (from SamMobile.com).
Whats next? Stick them all into Odin and hope for the best?
PDA -> PDA
CSC -> CSC
PHONE -> SiyahKernel
???
justinhd said:
Soo...here is where I am so far:
1. Downloaded SiyahKernel v5.0.1.
2. Downloaded PDA and CSC firmware for the country I reside in (from SamMobile.com).
Whats next? Stick them all into Odin and hope for the best?
PDA -> PDA
CSC -> CSC
PHONE -> SiyahKernel
???
Click to expand...
Click to collapse
Instead of doing all this together I suggest you just flash neat rom Lite (ics version, the latest v4 is JB) its the stock firmware with every bloatware removed and it is pre-rooted. Even v4 is pretty much stable and cool too as it is based on the leaked stock JB.
And several flashable addon are also available for it.
And If you are going to proceed with what you downloaded, flash Siyah after flashing the stock firmware.
Also before you proceed I suggest you check for brick bug, which can potentially superbrick your phone, Stock ICS 4.0.4 Kernel contains the problematic command, if you are effected, never perform any wipe or erase or reset with the stock kernel, just flash Siyah before doing all that.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Could you post a small walkthrough on how I do that?
EDIT: My current android version is 2.3.5. and I plan to flash 4.0.3. stock and then remove bloatware.
This is the link to the post with detailed instructions
http://forum.xda-developers.com/showthread.php?t=1569686
Remember "neat rom Lite" is suggested not just "neat rom" , and read the forum and instructions carefully.
NeatROM v3 is ICS I guess. And it contains v3 Siyah just flash the newest (which you downloaded) one if you feel like it(it's pretty much better)
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
This is the link to the post with detailed instructions
http://forum.xda-developers.com/showthread.php?t=1569686
Remember "neat rom Lite" is suggested not just "neat rom" , and read the forum and instructions carefully.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 07:51 AM ---------- Previous post was at 07:50 AM ----------
NeatROM v3 is ICS I guess.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
And how do i check for that brick bug?
justinhd said:
And how do i check for that brick bug?
Click to expand...
Click to collapse
There is an app called eMMc check in play store, but you don't need to worry if you're flashing a custom rom only the stock 4.0.4 has it.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
There is an app called eMMc check in play store, but you don't need to worry if you're flashing a custom rom only the stock 4.0.4 has it.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
Right.
I flashed CF-Root in order to root the current os.
Now, I wanna flash to 4.0.3. first. I downloaded an archive with a tar from sammobile.com from a carrier in my country.
How do I aproach this?
I put the .tar i downloaded in PDA in ODIN, and flash that first, and then put the Siyah tar in the PHONE field in ODIN and flash that second?
So long story short if you want to perform a factory reset,wipe do it from a kernel that is deemed safe like Siyah latest (v5.0.1 I guess).
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:07 AM ---------- Previous post was at 08:03 AM ----------
justinhd said:
Right.
I flashed CF-Root in order to root the current os.
Now, I wanna flash to 4.0.3. first. I downloaded an archive with a tar from sammobile.com from a carrier in my country.
How do I aproach this?
I put the .tar i downloaded in PDA in ODIN, and flash that first, and then put the Siyah tar in the PHONE field in ODIN and flash that second?
Click to expand...
Click to collapse
Siyah must be flashed later again via PDA.
Edit : Don't flash it via phone, it should be done via PDA.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
So long story short if you want to perform a factory reset,wipe do it from a kernel that is deemed safe like Siyah latest (v5.0.1 I guess).
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:07 AM ---------- Previous post was at 08:03 AM ----------
Siyah must be flashed later again via PDA.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
I get what you're saying, both files go into PDA and they get flashed separatly, Siyah being the second in line.
But I have the following problem, or do i?
My current kernel is XWKI8 and as far as I know you can't flash different CSC/FIRMWARE if its not compatible with the kernel.
justinhd said:
I get what you're saying, both files go into PDA and they get flashed separatly, Siyah being the second in line.
But I have the following problem, or do i?
My current kernel is XWKI8 and as far as I know you can't flash different CSC/FIRMWARE if its not compatible with the kernel.
Click to expand...
Click to collapse
Yes, so flash Siyah first, then the rest.
When I was referring to flashing Siyah I meant updating it, but if you have an incompatible kernel you must flash siyah first.
But if you are flashing a stock firmware (not tampered with) the kernel doesn't matter as the PDA file contains it and will overwrite the existing one with a compatible one.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
Yes, so flash Siyah first, then the rest.
When I was referring to flashing Siyah I meant updating it, but if you have an incompatible kernel you must flash siyah first.
But if you are flashing a stock firmware (not tampered with) the kernel doesn't matter as the PDA file contains it and will overwrite the existing one with a compatible one.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
Agreed, I raised the problem only because sammobile.com's info on the file i downloaded doesn't list a kernel and I assumed that it only contains the PDA and CSC.
So if you are flashing with tar files you most probably don't need to worry about kernel, for example in neat rom Lite v3 it includes Siyah v3, but in case of flashing zip files you need a compatible kernel before hand.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:22 AM ---------- Previous post was at 08:20 AM ----------
In some cases PDA file won't contain kernel in such a package the kernel will be given separately, like the CSC file.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:30 AM ---------- Previous post was at 08:22 AM ----------
Bro just make sure what kind of file do you have? A zip or a tar? Flashing a zip(it's done via CWM) - - >compatible kernel required
Flashing a tar(via Odin) - - >if kernel included nothing to worry just flash.
peace
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Hmm, I think the .tar file does contain everything needed, even though i flashed siyah first....
I guess i'll have to re-flash it after its done.
By the way, any idea how I remove those flash counts?
justinhd said:
Hmm, I think the .tar file does contain everything needed, even though i flashed siyah first....
I guess i'll have to re-flash it after its done.
By the way, any idea how I remove those flash counts?
Click to expand...
Click to collapse
Usb jig is your hardware and easiest option you can get it from eBay, or since you are using ICS, triangle away by chainfire will do the trick you can get it for free from his forum or you can buy him a beer and buy it from the play store.
Triangle Away is pretty easy too... Lol
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Okay so its done. For some reason the android version is indeed 4.0.4 but the phone is okay, i downloaded that app and it states that the chip is ok and again, for some other reason, its still rooted, i don't know if the tar i had contained a kernel or not, but its all good now. I HOPE.
EDIT: Wops....spoke too soon, i saw the superuser app on my home screen and I assumed its rooted, but its not. Gotta re-flash siyah's kernel now.
justinhd said:
Okay so its done. For some reason the android version is indeed 4.0.4 but the phone is okay, i downloaded that app and it states that the chip is ok and again, for some other reason, its still rooted, i don't know if the tar i had contained a kernel or not, but its all good now. I HOPE.
EDIT: Wops....spoke too soon, i saw the superuser app on my home screen and I assumed its rooted, but its not. Gotta re-flash siyah's kernel now.
Click to expand...
Click to collapse
Good work.. And lol.. Many has done that mistake and the cry about it in the forums.. Lol..
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
Good work.. And lol.. Many has done that mistake and the cry about it in the forums.. Lol..
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
Well, I flashed the kernel but now titanium backup is stuck at Searching Application Data, but it did prompt me for root priviledges... :|
EDIT: Meh...it was probably stuck because it was trying to access the SD card but my cable was still plugged in....fixed.
Now, i have one last question for the night: now i have 2 "root" apps in my homescreen, one is superuser and the other is supersu, judging by the fact that the "superuser" one was there when I first booted, I suspect that its useless and the supersu is the one with the root. How do I remove it?