Hi,
Kinda need help where currently my Galaxy Tab P1000 is stuck at Galaxy Tab/Samsung logo.
Before this I'm on v2.3.3, rooted. Then I try to flash MIUI ROM where resulting my tab to stuck at boot screen. Try to restore nandroid backup, still stuck at samsung logo plus now cannot reboot into recovery. Download mode still can access.
Hope someone can guide to solve this.
Sent from my HTC Desire using XDA App
im having the same issue.
BDR456 said:
im having the same issue.
Click to expand...
Click to collapse
I solve the problem already.
I flash back gtab firmware from samfirmware.com using Odin.
hi
sil3nthunt3r said:
I solve the problem already.
I flash back gtab firmware from samfirmware.com using Odin.
Click to expand...
Click to collapse
can you teach me how to do that please please please, I really need to repair my galaxy tab, it's my only device
Related
Hello
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/2012/06/install-new-android-236-xxjw4-value.html
Now i am trying to flash my phone through odin but when its finshed it my phone shows some erorrs in red coloures i also wipe factory and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?
Go to the bootloader and try to install the CM10.1 again. Then see if it boots. If it does, good.. Check the forums for the correct method to install a factory image. Oh and make sure you are flashing the correct kernel too.
Rash732 said:
Hello
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/2012/06/install-new-android-236-xxjw4-value.html
Now i am trying to flash my phone through odin but when its finshed it my phone shows some erorrs in red coloures i also wipe factory and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?
Click to expand...
Click to collapse
first flashed a karnel then try
Sent from my Micromax A68 using xda premium
country
premsrj said:
Go to the bootloader and try to install the CM10.1 again. Then see if it boots. If it does, good.. Check the forums for the correct method to install a factory image. Oh and make sure you are flashing the correct kernel too.
Click to expand...
Click to collapse
THANKS
yh i installed cm10 again n its booting up well n working again
i wana make sure can i download any stock rom of this device countries doesn,t matter for example i am in united kindom can i choose india or etc it will works ?
And one more question , can i flash my device through odin to direct with gingerbread 2.3.6 or should flash with lower rom like 2,21 etc ...
hi
Sent from my GT-I9000 using xda app-developers app
thank you man
.
zach101a2z said:
I tried to flash the stock firmware onto my Samsung Galaxy S4 with Odin in download mode and now it is stuck at that screen! I've waited and nothing happened. Please tell me what to do.
Click to expand...
Click to collapse
You will get more help here:
http://forum.xda-developers.com/forumdisplay.php?f=2162
i friends i need nand rom for my cloned samsung galaxy s4 i9500
i failed to backup with droidtools
please help me now..
i have attached all my phone description
please check and provide suitable rom.
i tired with one rom which i found on internet..it got flashed successfully but it comes it boot log but does not go further..
my mobile full info is given in the image
please help me with suitable rom..
thanks
urgent plz
hey friends any one found rom for this??
please post i need badly plz plz
amruthdada said:
hey friends any one found rom for this??
please post i need badly plz plz
Click to expand...
Click to collapse
try go to http://forum.xda-developers.com/showthread.php?t=2570772
i have backup from cwm but the problem is i can't upload because my bandwitdh
droidinterest said:
try go to http://forum.xda-developers.com/showthread.php?t=2570772
i have backup from cwm but the problem is i can't upload because my bandwitdh
Click to expand...
Click to collapse
i tried everything... with differnt roms...errors like dram file error..sp tool error..am getting..
i tried with one rom it got upgraded and when i switch on the phone it gets on but only till boot screen it will come..but further it doesnot go..
any help plzzz
try use cwm to flash. i prefer use cwm then flashtool to flash new roms. easy.
Sent from my Galaxy S4 using XDA Premium 4 mobile app
cDie said:
try use cwm to flash. i prefer use cwm then flashtool to flash new roms. easy.
Sent from my Galaxy S4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i tried many ways...i got a rom where everything is fine but the problem is with the system file in the rom..as its not correct... when i download rom to mobile through sp tool..it gets loaded but when i switch on the phone..only till boot screen phone works...but after boot screen it gets stucks and no further procedings..
i need system .zip or image file for mtk6572 i9500 cloned s4... nand rom....
its stuck here...its taking charge also...but not going further after this...check the image and plzz help me
amruthdada said:
i tried many ways...i got a rom where everything is fine but the problem is with the system file in the rom..as its not correct... when i download rom to mobile through sp tool..it gets loaded but when i switch on the phone..only till boot screen phone works...but after boot screen it gets stucks and no further procedings..
i need system .zip or image file for mtk6572 i9500 cloned s4... nand rom....
Click to expand...
Click to collapse
buddy . . now you're on the half way to "brick your phone". better you ask from the experts about this.
next time, when you want to flash ROMs. better use CWM to flash. if you not a good mod, don't use flashtool.
i am sorry. i can't help you on with you already go through before that . .
cDie said:
buddy . . now you're on the half way to "brick your phone". better you ask from the experts about this.
next time, when you want to flash ROMs. better use CWM to flash. if you not a good mod, don't use flashtool.
i am sorry. i can't help you on with you already go through before that . .
Click to expand...
Click to collapse
i think he has ubifs phone thats why he cant go to cwm...cmiiw
you need to find roms who built with nand, not emmc, you could tell most by looking at scater file, if it has emmc in it then it most likely not gonna work for you...one think to keep in mind is lcd driver, you have to know your lcd driver, and match it..my internet kindda error but if you could try download from needroms.com find roms that posted by ghiray, its a nand roms with 480x854 lcd(fwvga) sadly its for 4,7" phone
mine was 5" so its kindda crop for me and im still trying to get my roms also, but for now its work for me
Hello,
My galaxy wont start.... :crying:
I have bootloop in galaxy s3 screen and CWM screen (it says CMW recovery 6.0.4.6 and then crashed back to Galaxy S3 logo)
I cant startup the phone anymore. CWM does not work as well. I cant get anywhere right now!?
Anyone know what the problem is?
Flahs Original ROM
It isn't a big problem. Download the latest Samsung Firmware from Sammobile and your Country. Than go to download mode and flash the Version. I hope you know how odin work
Tkkg1994 said:
It isn't a big problem. Download the latest Samsung Firmware from Sammobile and your Country. Than go to download mode and flash the Version. I hope you know how odin work
Click to expand...
Click to collapse
Thanks, will look there!
Now I have to look for Odin!
Link
want to have a link for it?
HTML:
http://www.chip.de/downloads/Odin3_12992520.html
Problem is solved with odin and original firmware.
Topic can be closed, thanks for the messages!
Sleehond said:
Problem is solved with odin and original firmware.
Topic can be closed, thanks for the messages!
Click to expand...
Click to collapse
Very good. Your welcome mate Please hit thanks if I helped you!!
Tkkg1994 said:
Very good. Your welcome mate Please hit thanks if I helped you!!
Click to expand...
Click to collapse
Well, I am afraid but i think you may need to flash your device with the appropriate Stock ROM. Try heading over the sammobile/firmware section and download the stock ROM and flash it over to your device with the help of ODIN it will start working fine ! :highfive:
I just got a samsing galaxy s2 i9100. It does not connect to my pc (device descriptor failed) and it has been soft bricked i have tried to install another firmware but it gives me error singnature verification fail. Please help me My android recovery system is 3e. Thank u.
Did you already have a custom firmware on? I managed to get around my soft brick by loading on the stock rom
redukdaz said:
Did you already have a custom firmware on? I managed to get around my soft brick by loading on the stock rom
Click to expand...
Click to collapse
no I had the original 4.4.2 plus how did you connect your s2 to pc
Look at my posts here - https://forum.xda-developers.com/galaxy-s2/help/sgsii-bootloader-t3686898
Thanks guys, I updated the operator firmware to the latest one I could find, it now boots up thankfully
I'm trying to install the custom recovery trwp on it via odin, but for some reason it doesn't work, could you point me in the right direction? I've looked at so many posts I'm googly eyed now :cyclops:
Thankyou :good:
098765 said:
no I had the original 4.4.2 plus how did you connect your s2 to pc
Click to expand...
Click to collapse
toy_story said:
Look at my posts here - https://forum.xda-developers.com/galaxy-s2/help/sgsii-bootloader-t3686898
Click to expand...
Click to collapse