Related
Hi guys im new to the forums and couldnt find any bricked fascinate info that could help so here i am. Forgive me if this has been discussed. Anyway my Samsung fascinate is really bricked bad. I cannot go into download mode to flash a stock through odin and i cant get to my nandroid backup in Cwm voodoo. Im stumped. Please help. And once again there's absolutely no way i can go into download mode, and none of my lights come on my buttons either. I fear shes done for. What i did before she bricked was like an idiot i flashed dorians ugjk3 v2? For captivates because i was under the impression it would work. WHAT DO I DO?
first search download mode "jig" in google. This will allow you to jumper certain pins on the usb port of your fascinate. If that dont work than you will have to give this a try.
http://forum.xda-developers.com/showthread.php?t=1288093
Im basing this off of the fact that you have tried every typical method of getting into dm...such as different computer, usb cable, uninstall/reinstall samsung drivers, heimdall instead of odin, etc...
Yea i cant use the jig because no samsung symbol comes up, and that second one I understand but Im not confident with a soldering iron. If thats the only possible way i will try it (after much practice elsewhere.) Ive never tried hiemdall because i read the walkthrough and its based the same as odin in requiring download mode am i correct? And thanx for your assistance
You are in luck my friend. Take a look at this post: http://forum.xda-developers.com/showthread.php?t=1288162. All you need is some soldering skills and vmware or virtual box to install Ubuntu if you don't alright have a computer running linux. Post back with your results if you attempt this, im curious if it works or not.goodluck
I just bought my new Galaxy SII for a penny. Great deal, and spectacular phone. Happens to be my first android phone as well (been waiting for one for years). The only problem i am having is when I put the phone in USB debugging the computer won't pick it up in explorer. If I enable USB mode I can copy files, but I cannot root (Trying the Xperia X10 Easy Rooting Toolkit, spits out crap about "cannot find the path specified", no matter what I do). Kies also seems to not work with the phone... I have tried both my Self Built Windows 7 HP 64 Bit Desktop and Windows 7 HP 32 Bit netbook and both have the same problem. Windows Devices and Printers reads the device but says that the driver has not been installed, when in fact it has...
Any and all help to resolve this problem would be greatly appreciated.
Haha thanks, got it working. Rooted and everything, sorta excited-kid in a candy store .
OK. So if you couldn't tell, I'm a complete newb with android, wanted it for forever, but circumstances didn't allow me to until now, and now I feel a little over my head. Sooo:
1.) Could you (or someone) maybe post links to some threads or sites that would be good to ease me into the world of android?
2.) With my Samsung Galaxy SII, if I am installing ROM's and taking them off, and installing new ones, what are the chances of bricking my device?
3.) Since I rooted it, I went over to CyanogenMod and downloaded the ZIP to the latest stable ROM. I then dropped it into my SD card, and went into a app I downloaded called ROM Manager. When I went to install from SD card, and it rebooted, it gave me an error and popped back out, seemed like I did it wrong. So how do I install ROM's (CM7 in particular).
4.) How would I go about removing that ROM after its been installed and im tired of it ?
I hate feeling like a newb, and would be very thankful for any help people would be willing to give to get me started!
Ok, two more questions .
1.) Is there a good app to backup my current apps before doing a wipe(I have a ton of them...)?
2.) I read that ROM's cannot include google apps, so how would I get them on? Would I download the APK and then sideload them?
Thanks again!
The ROMs that I downloaded were all in ZIP folders and I couldn't figure out what I should link to odin as ZIP folders aren't compatable to flash . And then my phone wont reboot into recovery or download mode (can't remember which one I need to be in for Odin). I tried with debugging on and off and it just boots right back into android. This is very frustrating, as I know I must be doing something wrong...
Thanks for all your help
Sent from my SAMSUNG-SGH-I777 using XDA App
bencozzy said:
Download mode-power phone off hold to buttons vol up and vol down power is still off and connect usb cable from computer. Download mode menu will pop up.
CWM or recovery-vol up + vol down plus power from phone being off until you see forst boot animation samsung.
Odin uses .tar or .tar.md5 files do lots of reading i think zedomax has a youtube video for rooting the i777 and how to get cwm.
Click to expand...
Click to collapse
thats the method i used for rooting and it worked flawlessly and was quick and easy
Wow you need to slow before you do something stupid. Take the time to read and just as important, if not more important, take the time to search the internet for your questions.
Learning what steps needed to do something to your phone is not the goal. Learning what you are doing and why, should be the goal, and learning how to do each step is a sidepoint that you learn as a by-product.
Most important thing to learn why and how to check for is to make sure what you're flashing does not contain bootloaders. If you mess with bootloaders and the smallest thing goes wrong, you end up owning an extremely expensive paper weight, i.e. a brick.
In general flashing what the majority flash here on xda is safe. But that's not a guarantee as any garbage can be uploaded. So read the entire thread. Some are long. If you can't be bothered to read the longer ones, at the minimum use the search tool to look for particular words to your question. Search before you post. It will be evident by what you ask that you've spent the time researching, and will attract a higher level of help.
I'm not trying to be mean or come down on you. You're already starting to do what's right by asking when you're not sure.
A NOTE TO YOU AND EVERY NOOB ON XDA:
One of the biggest reasons people's questions receive no response for a day or more, is because their question could be easily solved by using the search tool in xda or one google search.
In the wise words of tom cruise, "Help me, help you. Help me, help you!"
And yeah, he can fly.
Sent from my páhhōniē
Yea. I goofed and I flashed an international ROM onto it. I was able to find a unrooted stack tar to flash. I plan to do a lot of reading before I do this again . If anyone has any ideas on where to start that would be great.
And no problem, I understand as I am a heavy user of tomshardware forums. It frustrates me when people ask for advice a two second search would pull up.
Again thanks everyone! XDA is awesome!
Sent from my SAMSUNG-SGH-I777 using XDA App
I know it's been a couple days since you asked, so hopefully you've already found what you're looking for, but I always recommend people read all of creepncrawly's write ups. They cover near every question and are up to date on everything.
Sent from my páhhōniē
Hello everyone,
I recently bought a "second hand" GT 10.1v, for which the previous owner tried to root it and install a custom firmware. He told me he had a problem during the processus and now the Tab is runs in an infinite bootloop.
I though I would be able to fix it (I have a GSII which I customed a lot so...), but I guess I was wrong... I've been looking for some answers for the last 2 days but can't do nothing. Here's the problem :
* I tried to do the method to root the device one more time. I make the button procedure to arrive to the screen with the usb plug and the android working in a triangle.
*When I choose the usb plug, I have these informations written :
fastboot usb download protocol
bootloader version : p7100BUKC8
baseband version : P7100BUKDF
serial number : the serial is written
lock state : unlocked
*When I choose the triangle, I have these :
reason : force key
secure mode : secure
check signature : check
oem lock : unlock
waiting usb cable...
Regardless of my choice, I can't have any communication with my computers (running under windows 7 x64 or windows vista x86)
*I tried with Odin (after choosing the triangle), the device is not recognized in odin.
*I tried with fastboot mode, following step by step different tutorials (this one was the first) with installing usb drivers via google sdk, modifying the android_winusb, moving adb to "tool" folder, adding the fastboot nvidia to this folder.
When I type fastboot devices in cmd, nothing is written. When I try fastboot oem unlock, it shows "waiting for device".
When I type adb devices, I have a blank list of devices.
The problem is that when I plug the usb cable to the computer, windows doesn't try to install drivers and I don't see Android phone nor ADB device or something like that in the device manager of win7???
I'm totally desperated, could someone help me to fix my problem??
Sorry for the length of the post but I prefer write as many informations as I can so you don't waste time by trying to help me on something already done.
Many thanks to you all!!
Using windows7 I'd reinstall the usb drivers as a first step. If it says the drivers are already installed, install them anyways, and see if that gets you any further. Hopefully it will.
Plus hopefully someone with more experience with 10.1v will come help also.
If you see this it was sent using my GT-P7510.
Hi Benzoman,
Thank you for your prompt reply, but as I said, the problem is that windows doesn't even detect it. How can I install the driver if I have no device in the windows device manager?
download the driver from Samsung or wherever you want and run the download. I'll post a link in a minute.
If you see this it was sent using my GT-P7510.
EDIT: Just noticed your posting for the 10.1v No experience with this version myself personally but try the following links.
Post for unlocking which includes USB Drivers http://forum.xda-developers.com/showthread.php?t=1064793
Thread referred to in first post for Windows Users http://forum.xda-developers.com/showthread.php?t=1083517
Like I said I haven't messed with the 10.1v myself so I would follow the original thread instruction first and see what they do for you. Else ask for help with the problem somewhere appropriate for the 10.1v there unless you already did.
Thank you for your help, but I still don't understand, and this is for every type of device, how can I install driver if the device is undetected by windows?? In the device manager, I don't see any unknown device or something equivalent...
You have the same issue as i do, The COM ports won't be able to be read until the device itself has loaded/opened it's COM ports to be able to communicate. Your best bet would be attempting to get it to detect via APX mode. Once that works, your only solution to getting it to boot/flash firmware normally? would be to drain the thing dry
PS- I posted a guide on here on how to get it out of the "Endless boot" or Sleep of death. I won't say your case is unique, but no reason not to give it a go, right?
I had a similar issue with my 10.1v and the 10.1 3G , I ended up bricking my 3G and getting the 10.1v at a second hand price due to the very same reason. After draining them completely I had flashed both of them successfully and now like cancer free patients, they're both alive and kicking.
Edit: I forgot to add, this is normal, the device won't even pop up on Device Manager or the "Installing drivers" list until and unless you drop it to APX mode. If you did it right, You'll hear the USB sound.
Thank you for your post Misledz, it seems that someone has a new method which might work (I hoooooope so lol).
But could you explain me what you mean by APX mode and how to get into it? I don't really understand.
Plus I don't understand what you mean about drying the thing dry. Could you explain me that too?
Many many thanks ;-)
Edit : Ok, I finally found your tutorial and will test it, hoping this will work ;-) I keep informed.
juxci said:
Thank you for your post Misledz, it seems that someone has a new method which might work (I hoooooope so lol).
But could you explain me what you mean by APX mode and how to get into it? I don't really understand.
Plus I don't understand what you mean about drying the thing dry. Could you explain me that too?
Many many thanks ;-)
Edit : Ok, I finally found your tutorial and will test it, hoping this will work ;-) I keep informed.
Click to expand...
Click to collapse
Well glad you found your way to it :] The guide talks about how to drain it dry and get it to work :] In hopes it works!
??? I don't understand why but now I'm unable to turn on the Tab unless I plug the usb in??? (maybe she's feeling i'm about to fix it?lol)
It will be hard to drain it if I can't turn on and off without plugin' it. Any idea??
Edit : important thing : when I plug the usb, I have the battery charged to 100% and the Tab vibrates, so no, it's not because the battery is empty lol
Edit II : I'm not sure I fully understood the tutorial. My though is the following:
1, I drain the tab by holding the power button down.
2, I hold the power and vol+ buttons, plug the USB and maintain both buttons for 15s (could it be more?).
After that normally I should have a loop of pop up in the device manager for APX device, I release the vol+ button but keep power button hold and wait the end of the loop to install the nvflash driver?
Correct? 'cause if it is, it don't work for me :-S I can't have the pop up loop (I remember I had this loop once, but I released the power button and the loop cut and the "unknown device" disappeared from device manager. But since, I can't get this again)
juxci said:
??? I don't understand why but now I'm unable to turn on the Tab unless I plug the usb in??? (maybe she's feeling i'm about to fix it?lol)
It will be hard to drain it if I can't turn on and off without plugin' it. Any idea??
Edit : important thing : when I plug the usb, I have the battery charged to 100% and the Tab vibrates, so no, it's not because the battery is empty lol
Click to expand...
Click to collapse
I don't think your actually getting it The whole idea is to drain it or find an alternative way to get it to fastboot mode to bring it to Download Mode where you can flash an HC rom of choice to save it 140%. 100%..Wow that's not going to be easy to drain..
In fact, I don't know why, it seems it was kind of a bug because after that I unplugged and plugged the socket charger again and I had a battery icon why a exclamation mark and charging.
However, it seems you answered when I was posting "edit II" in my previous message. Did you read it?
Anyone having an idea?
Good luck with helping this one Misledz.
They don't know how to reinstall drivers in a windows machine if the device the drivers are for are not found
So this is might just be a fun endeavor. :screwy:
I think there are other issues needed resolved before this person roots or mods anything. Like understanding their Windows machine and how to install/reinstall drivers.
Always has just been running the install from the drivers file and accepting yes I want to install the drivers even though the are already installed. I could be missing something about this part as it pertains to this problem. But sure I'm not mistaken about how to install/reinstall drivers on a windows machine. Windows can't be expected to recognize every thing first, and then download and install the drivers for it. Maybe its me but that's what I'd call a fantasy world. I know thats what plug and play says it does. I also know that it often fails. So, needing to learn, I even know how to completely uninstall the possibly offending drivers before reinstalling said drivers, sorry I don't have the patience to help with this one, but when you goto the10.1v I can use that as my excuse since I don't own one.
Plus I don't want to follow you into the rabbit hole.
A sincere Best of luck to both of you. Misledz and the person with the problem. :thumbup:
If you can read this it was sent using my GT-P7510.
Benzoman said:
Good luck with helping this one Misledz.
They don't know how to reinstall drivers in a windows machine if the device the driver are for are not found
So this is might just be a fun endeavor. :screwy:
I think there are other issues needed resolved before this person roots or mods anything. Like understanding their Windows machine and how to install/reinstall drivers. Always has just been running the install from the drivers file and accepting yes I want to install the drivers even though the are already installed. I could be missing something about this part as it pertains to this problem. But sure I'm not mistaken about how to install/reinstall drivers on a windows machine. I even know how to completely uninstall the possibly offending drivers before reinstalling the drivers, sorry I don't have the patience to help with this one, but when you goto the10.1v I can use that as my excuse since I don't own one.
Best of luck to both of you. Misledz and the person with the problem. :thumbup:
If you can read this it was sent using my GT-P7510.
Click to expand...
Click to collapse
sure, Just abandon me Q.Q
But anyways the driver for the device is in the samsung website, it's device specific.
In order for the device to be recognized you need to have the appropriate driver for it.
Another would be making sure that the tablet get's read on the computer via fastboot mode/adb. You need to use the Volume Down+Power option till the logo boots up.
Then again, what do you see when you boot up the tablet? / Can you even boot it? That would be a good start and more detailed info would be appreciated
PS- I just read your Edit II, turns out to get unknown device it's Power+Volume Down, which is the left button on the volume keys. You hold it down when it's plugged via USB to the PC for 15 secs, 20 seconds doesn't matter just it needs to cross the 15sec benchmark. Once you get past it forces itself into APX mode. This is where you need the APX driver for it. Seeing as to your tablet is unlocked you may be able to save it.
I edited my post after you quoted to try to explain my potition and reasoning reasons a little better. Good luck mate!
If you can read this it was sent using my GT-P7510.
Misledz :
The problem is that I don't find (after several researches) the drivers on samsung site, but I found another one.
The tablet is not recognized in ADB nor in fastboot (as told in my first message)
When I boot the tablet, I see the samsung logo with open padlock and then the boot animation with the android bot and then I'm stuck there.
When I hold power and left volume button, the device turns on and I see a screen with the usb and the droid in the triangle (downloading mode)
I think (by reading the very interesting post of benzoman) that it might have a confusion about "the device isn't recognized by the computer". What I mean is :
When i plug it via usb, turn it on normally, or put it in downloading mode or fastboot mode, the computer doesn't even react (any sound like when i plug a usb key nor pop up saying "new device detected" in the right bottom corner of the screen)
I hope these informations added to my first post are enough for you to have a clear vision of my problem.
Benzoman :
You don't have time to give the informations you "know", but enough to waste by writing this type of s**t?!
Can you tell me how does a cyclotron works? How we modulate the power of the exiting ray of particles? When you will be, just come back to waste your time here and show that you think you're smarter than others. Everyone has his own job, I'm not into computer science so yes, I recognize I'm far to know every thing, and I think that's the purpose of this type of forum : share knowledge and help others when needed.
I think you should open a new type of forum, if your entertainment is to waste your time by laughing at other's problem.
You wrote about 10 lines to say nothing...but don't have time to give a hand? How many lines would have been necessary to give a useful information? By seeing how strong you're saying you are, surely less!
At least, if you don't want to help, don't foul the topic, it will be easier for the ones who really want to help to follow!
juxci said:
Misledz :
The problem is that I don't find (after several researches) the drivers on samsung site, but I found another one.
The tablet is not recognized in ADB nor in fastboot (as told in my first message)
When I boot the tablet, I see the samsung logo with open padlock and then the boot animation with the android bot and then I'm stuck there.
When I hold power and left volume button, the device turns on and I see a screen with the usb and the droid in the triangle (downloading mode)
I think (by reading the very interesting post of benzoman) that it might have a confusion about "the device isn't recognized by the computer". What I mean is :
When i plug it via usb, turn it on normally, or put it in downloading mode or fastboot mode, the computer doesn't even react (any sound like when i plug a usb key nor pop up saying "new device detected" in the right bottom corner of the screen)
I hope these informations added to my first post are enough for you to have a clear vision of my problem.
Benzoman :
You don't have time to give the informations you "know", but enough to waste by writing this type of s**t?!
Can you tell me how does a cyclotron works? How we modulate the power of the exiting ray of particles? When you will be, just come back to waste your time here and show that you think you're smarter than others. Everyone has his own job, I'm not into computer science so yes, I recognize I'm far to know every thing, and I think that's the purpose of this type of forum : share knowledge and help others when needed.
I think you should open a new type of forum, if your entertainment is to waste your time by laughing at other's problem.
You wrote about 10 lines to say nothing...but don't have time to give a hand? How many lines would have been necessary to give a useful information? By seeing how strong you're saying you are, surely less!
At least, if you don't want to help, don't foul the topic, it will be easier for the ones who really want to help to follow!
Click to expand...
Click to collapse
Please do not quote this post as it is being edited constantly to futher help juxci and explain any misunderstandings and quoting it before completion will only cause more issues. Thanks for understanding.
First, I was trying to be polite by stepping back and letting Misledz help you. Having both of us suggesting conflicting ideas would have of been little help.
Second, if I did't understand the very basics of say, oh idk, maybe a cyclotron why would I mess with something that relies upon on it? I still would because there are others that can help, should something go wrong. Albeit, I would not DEMAND their help and would even understand if they chose not to help if I acted an a$$.
Then b!tch because someone tries to help me, and my response comes across like I know what I'm doing, but is really only being a rude reply of, "Can't do that." When the person trying to help knows it can be done, confirming I know not even the basics of the cyclotron and should be open to any and all help. Not act an a$$ by just saying, "That can't be done." When it can be done, and easily, if the person who knows about the cyclotron would tell me. But, since I want to be an a$$ and act like I know what can and can't be done on the cyclotron. The person who could have helped with it says, if I'm not going to listen, then they'd rather not be directly rude themselves, and get aggravated, notices another who has the knowledge is present, wishes them both an HONEST WISH OF LUCK and leaves.
This is basically what I myself was trying to do. I know the drivers can be completely be removed and reinstalled on the PC, but you acted an a$$ and said, that can't be done, sounding like you knew, what you were doing, and wasn't going to be open to accepting my help, without causing me great frustration in the process. So knowing that the very knowledgeable Misledz, was here to help, I thought it best to leave it up to him. My wish of luck was sincere, even if it was indirectly sarcastic.
I should stop here and not look back at the thread, but I have always tried to help where I can.
If you really would like my help personally. Here you go, I'll start again. Although it's repeating things Misledz has already said.
You need to get legitimate Samsung drivers which are specifically for YOUR device to install. Ones found elsewhere may cause more problems than they fix.
If installing the drivers over the top of the others doesn't help you need to uninstall the old drivers fully. Then install the official drivers. This has helped others and even myself once or twice. Widows is a finicky little [email protected] sometimes.
Uninstalling the old drivers completely may be considered complicated and without having another reference handy to help me guide you to a program, I can't do it correctly. I will have to get to my PC where I have access to use references for me to look at so I can help you best. I will be back to to check on the progress of your issue. ASAP
I think some of the problem may have initially been from my personal misunderstanding of your grammar. Believing you were stating things in a way you did not mean. If that is the case, I apologize.
Edit: http://www.nirsoft.net has a program called USBDeview. It is what I use to completely uninstall all Samsung drivers. I use it to find and remove all the drivers found referencing Samsung. CAUTION...this could cause even more issues than it solves if you remove the wrong drivers or you don't have the drivers specific to your device. I cannot say any specific driver is safe to remove without being able to see and know what they are there for.
Being that you're using a 10.1v Device and I only have personal experience with the 10.1 (no v after 10.1) I may lead you in the wrong direction. One of the reasons I was not going to help, as I stated in a previous post you took as offensive.
But if you wish to continue with my personal advice just post your progress and I'll post help when I can.
I honestly think Misledz would be of more help to you and I'm only going to get in the way trying to help. We're both saying basically the same things using different words.
Whatever the case, keep us updated.
D:...I was wondering what the fuss was about...and then the mega paragraph came Let's relax on this firstly, Jux , Benzo is just trying to help I do agree I end up suggesting the less problematic solution to drain but ofcourse there are other methods to "tame" this wild beast of a tablet. I've only been on the Galaxy Tab scene for less than a week so I'm just giving information based on experience , I hope you don't take to heart what he said, as this is a Q&A thread and almost 70~80% of the threads go unanswered that people purposely post in the development area for quick attention..only to be booted here by the mods (Which I agree they are doing a good job, Kudos), atleast on the positive side, there has been interaction in this.
Moving on to the main deal.
I know you have mentioned the droid and the triangle, but it confuses me as to do you stay in that screen or do you select an option. If memory serves me right, the left, being the droid logo (You select it with the (+) key, which is the right volume key, and navigate with the (-) and select the droid logo) I know you haven't been into download mode because you didn't mention the warning that it gives before you actually get into download mode.
Warning goes somewhere along the lines of proceeding at your own risk with a huge ass triangle telling you the following. In which you need to press the plus key again to confirm. If you did this right, no matter what, lack of driver or such, the PC will recognize the newly open port. Normally Odin won't recognize the tablet despite being in the fastboot menu, but adb will.
I would however suggest trying a different USB port? or another laptop? Normally this RARELY happens but some HP based desktops come with a built in MMC reader which consumes a port of it's own and conflicts with the port Odin requests. You don't really need a high end PC to get this done, just the required files.
And just for reference could you kindly state what OS are you on, Windows __? Seeing as to how you said you aren't that tech savy I would assume it's either Vista (Which has some HORRIBLE USB port management) , If it's XP , XP tends to reserve USB port's for previously plugged devices to avoid the recache or reinstallation of drivers.
I know the vast questions may sound silly, but trust me on this, the least expected situations are what causes the most frustrations
Note: I haven't worked in any Service Center's if ever you're wondering -.- so I do apologise if I sound like one of those Dell service reps.
My sentence was :
"Thank you for your help, but I still don't understand, and this is for every type of device, how can I install driver if the device is undetected by windows?? In the device manager, I don't see any unknown device or something equivalent"
I don't see what's not clear or what let you think that I meant "that can't be done"... Whatever, you made apologizes, I make mine too for the eventual misunderstanding between you and me and yes of course, your help is still welcome if you want to.
So, back to the main problem, I used usbdeview to uninstall all samsung drivers.
After that, I followed this tutorial to enter in fastboot : http://forum.xda-developers.com/showthread.php?t=1064793
That means I :
- Downloaded and install the JAVA SDK
- Downloaded the Android SDK
- Downloaded the USB drivers
- Edited the “<PATH TO ANDROID SDK>\extras\google\usb_driver\android_winusb.inf”
And then :
1) Power off your tablet
2) Hold the VOLUME DOWN button and press the POWER button (your tablet will power on and you will see the BACKUP and USB icons)
3) Use VOLUME DOWN to select the USB icon, and then press VOLUME UP to confirm the selection.
4) You should now be in fastboot mode (the word FASTBOOT should appear somewhere in the top left corner)
5) If Windows doesn’t automatically detect the device, go to device manager and find the ‘Fastboot’ device. Right-click and select update driver, choose to manually install and browse to the “<PATH TO ANDROID SDK>\extras\google\usb_driver\” folder.
And there is the problem : any sound when I plug the tablet, windows doesn't detect automatically, so I go to the device manager to look for the "fastboot device" (or another type of device that is not from the computer) and I don't see nothing...so I can't update drivers.
So that is why I asked the question : How can i install drivers if the computer doesn't see the device?
After that, I tried all the things you can read in my first post because I wanted to be as complete as I could in my description so you can have all in your hand to give your advice.
*Cough* before It goes un-noticed my suggestion got blocked by your reply
Ok so i was in my flash happy mood earlier today..
I saw that ICS slim was updated and was going to try that, well i had ICZen on my phone at the time and tried to flash Slim, well blah blah, it didnt work.. The op told me to flash from a rom that had cm9 (iczen has glitch) so i flashed Lithium MIUI--went back into recovery and started to wipe.. i wiped everything.. So i went to go flash ics slim, and as soon as i pressed 'Yes, install..' it was installing for a very short bit, then all a sudden a reboot and got stuck on the rainbow screen...
I cannot go back into recovery, but i can go into download mode.. BUT this is where the kicker is......
My computer doesnt recognize my device... ive installed driver after driver to get it to recognize. Well, no avail
Even tried installing the drivers on 6 other friends computers (at my college) and all of them still didnt recognize my device..... SMDH.. been trying to fix this all day and im pissed.
Any ideas what to do? Hate to go out and buy another phone......
And before yall say 'you cant flash miui and then go straight to ics, you have to odin' --- No, i did it all the time.. This time something went wrong and idk what
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
dpaul007 said:
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
Click to expand...
Click to collapse
yes, ive installed the nexus drivers too.. im positive its not a bad cable, ive used it on my computer before hand.. and yea, ive tried another cable as well..
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
matholomus said:
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
Click to expand...
Click to collapse
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
TopShelf10 said:
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
Click to expand...
Click to collapse
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
matholomus said:
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Click to expand...
Click to collapse
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
bfranklin1986 said:
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Did kies as well lol.. didnt work.. when it told me to connect my mobile device, i did. but it didnt register
TopShelf10 said:
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
Click to expand...
Click to collapse
i literally restarted my computer 7-9 times from uninstalling and installing driver after driver.. been doing this all morning.. no class, lol thank god. so im in the dorm getting my nerd on..
tried it again on 2 other computers (installing drivers and what not) didnt work.. Tried 2 other usb cables, didnt work..
Tried ur method of cleaning usb ports, didnt work lol.. (i blew in them/phone too)..
im currently on C.L. lookin for a new phone, I WOULD hate to have to leave the vibrant community.. yall been great with roms/drama LOL..
im slowly losing hope on this .. but im continuing to try and fix this
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Click to expand...
Click to collapse
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Woodrube said:
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Click to expand...
Click to collapse
thanks... but the aio toolbox is not going to the download link for me. the download link is down or something.
i did download the .net files tho, jus cant download the toolbox
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
That is what I am getting at.
If he can get into CWR then he can mount the phone to the computer in Mounts and Storage, put a simple 2.2 ROM on there and get it to boot up so that it works. then figure out the driver thing later on once we can get it to fully boot up.
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
Click to expand...
Click to collapse
cant reboot into the bootloader nor recovery.. the only thing i can do is download mode..
I have the GB bootloader.. im sure of it lol
and yes i installed odin and all the files on all 6 of my friends computer.. none of them worked
davil544 said:
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
if i could get into recovery, i wouldnt be posting something like this LOL.. ive unbricked my phone before (that was when my comp recognized the device, now its not)
My device is not recognized by the computer, so my sd cards dont show on the comp
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
Click to expand...
Click to collapse
oh and i did do the little tricks you said, i found that op..
that person had the same problem as me and everyone tried to help, they gave him/her links and everything.. i followed with the links too, and just like that person, none of them worked for me either
saw the download link that oldecrow posted.. its working.. downloading now
Ok. Keep trying once it is downloaded and let us know how it is going. I am getting ready to leave work soon, so I won't be on until later tonight but there are plenty of others that can help.
There's also the One-Click Vibrant DeBrick from Adam Outler. I've used it on my netbook on phones with your identical problem and its never failed yet.
Also, Heimdall on Ubuntu will flash it no problem, it does NOT need drivers like Windows does...
http://www.glassechidna.com.au/products/heimdall/
Sent from my SGH-T959 using XDA App
Up and running!!!!!!!!!!!!!!!1
NEVER WOULD HAVE THPOUGHT!! (well i did but...) anyways im up and running now!!!! Wow, idk what happened... it just started working.. i plugged it in and odin recognized it!!..
im on 2.1 again lol.. so all i need to do is go back into recovery and reinstall packages right?
Did i lose root? i forgot
1. My phone wont boot .. gets stuck at The S2 GT-I9100 logo stuff.
2. When trying to get in to recovery it says: "E:Can't mount /cache/recovery/command"
3. I can get in to download mode though
4. My computer wont recognise the phone in either recovery or download mode. It says its a "Universal Serial Bus (USB) Controller" in device manager.
5. Yes, i've installed the Samsung USB drivers. Uninstalled/reinstalled them 100 times. Not running Kies. Tried rebooting computer.
6. Tried shifting cables, ports and so on.
Any other suggestion? I think its bricked ... or?
Try another PC maybe?
Sounds like a driver's conflict.
Sent from the little guy
gastonw said:
Try another PC maybe?
Sounds like a driver's conflict.
Sent from the little guy
Click to expand...
Click to collapse
Will try later, too tired now .. been fiddling with it for 12 hours now. I think i'm getting ready to go to a mental instutition. I need my phone! I got a retarded old LG as a backup now.
Pop up a Valium, it'll help you thru.
Sent from the little guy
It could connect fine on another computer. But i couldnt find a stock rom that ODIN would write to it. It always said something about write failure.
Any suggestions?
Keep trying. In a lot of these cases, you'll try 9 Odin flashes (as an example) & they all fail, and for one reason or another the 10th works.
Look for Hopper8's 'Odin won't work' thread. There will be stuff in that thread you haven't tried yet. Basically it's a case of perseverance unless you want to take it to a service centre.
MistahBungle said:
Keep trying. In a lot of these cases, you'll try 9 Odin flashes (as an example) & they all fail, and for one reason or another the 10th works.
Look for Hopper8's 'Odin won't work' thread. There will be stuff in that thread you haven't tried yet. Basically it's a case of perseverance unless you want to take it to a service centre.
Click to expand...
Click to collapse
I'll keep trying. No way im gonna pay for it when i know i can do it myself (warranty expired) But thats gonna be tomorrow .. thinking about reinstalling windows on my own computer to get the Samsung Drivers working on my own, so i dont have to go to some one else each time i feel like trying
You wouldn't have the link to the thread? There are like a million odin threads
Nevermind i found it