hi there, i've searched and searched and cannot for the life of me find any stock roms or anything for the telus fascinate it probably doesn't help that I don't know what the build number is... I flashed a verizon vibrant rom quite a while ago and don't remember my methods of doing so, I've read that it's going to be a huge PITA to get it back to stock, especially because I can't seem to get it into ^&%^*% recovery mode or even get it to connect to my pc.. so any help in that regard will also be MUCH appreciated
THANK YOU in advance.. I hope!
Alright so i managed to find an all in one zip file in a tutorial post obvs i didn't look hard enough lol!
So that just leaves me with the more important predicament. I can't get my phone into recovery mode to flash with odin and my pc won't connect to the pc at all.. I read somewhere that my phone is soft-bricked???? Because of using a vibrant Rom? Any input is greatly appreciated once again
P.s can a mod change the title? Or can i? Because its slightly irrelevant to the post now
Sent from my GT-I9000 using XDA App
Can you link the All in One ODIN you are talking about?
I sure can here it is
http://forum.xda-developers.com/showthread.php?t=923712
coincidentally this is also the exact procedure i followed when I rooted and flashed.
so a little more information for you.
sorry about the reply taking forever i couldn't find the post on my phone and haven't had much time to sit on the computer
AntoineDon said:
So that just leaves me with the more important predicament. I can't get my phone into recovery mode to flash with odin and my pc won't connect to the pc at all.. I read somewhere that my phone is soft-bricked???? Because of using a vibrant Rom? Any input is greatly appreciated once again
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Says your phone model is GT i9000 so you probably flashed a gti9000 rom (Bell Vibrant / international Galaxy S).
Anyway... you need to be in "download mode" to flash via odin. I think you meant phone to pc, but were you able to connect your phone to the pc before? Do you have the correct drivers installed?
You know you're in soft-bricked if when you turn on the phone, you get a picture of a phone to pc with a ! in between. This can be fixed by a USB jig, or for some, just doing the download mode button combination while your battery is out and your usb is plugged into the computer.
What rom did you install exactly?
Yes i realise that i suppose that's what i meant but odin doesn't pick up my phone and my pc won't either. I used to be able to connect yes but now it won't I have the drivers downloaded i havent had the chance to try a different cord but this is the same cord i used to flash, so im pretty sure that's not the problem.
I guess its not soft bricked then i haven't seen anything like what you have described,
The Rom im using is called EXTRAordinary Rom or something like that ill try and find a link for you
Sent from my GT-I9000 using XDA App
Bump? This is a serious issue for me as my Bluetooth is not working and things are constantly force-closing...
Sent from my GT-I9000 using XDA App
If you have gotten your phone into download mode and your pc isn't recognizing it, you should; 1 - try a different pc, 2 - try a different cable or 3 - try both. Are you still able to get it into download mode?
Ughh I've tried every computer in my house, 3 laptops and one desktop...
My personal laptop is the only one it worked on previously, it now doesn't work, and I only have the original cable i did the flashing with originally, but i'll yoink a cable from work tomorrow do test that out, although I am seriously doubting it would work... my widgets have recently stopped working as well, they say "problem loading widget" I'm pretty scared by this point and feel as though my phone is sloooowly hardening into a useless brick. i'll update tomorrow, when I get a new cable.
um also, I've posted this question in a different thread but have yet to be answered, why can't I find the telus usb drivers anywhere? they don't have it on samsung's website,,, i haven't installed any drivers since the original flashing and have no clue as to where to find them... as far as I could remember it was ridiculously easy to find them last time....
Thanks in advance,
Antoine
try installing samsung kies-worked for me once
IM REAL DUMB FOR DOING THIS! i flashed a .tar file in CWM and now i just have blue and green lines across my phone i cant get odin to recognize it and i cant get into download mode should i just quit or is there a fix? Any help would be great THANK YOU!
PLEASE HELP!!
Theres plenty of options but alot of us are tired of writing them all down... there is enough info on this whole forum to fix your issue, its just a matter of time, patience and persistence
Sent from a cell tower to the XDA server to you.
What he said. Search the forum for "UNBRICK MAH VIBRNTZ" or something or other and you'll get a ton of answers, a few of which may involve cheese.
so why dont you point me into the direction to actually help instead of assume ive done nothing but complain on a thread. I have searched the forums and i cant find anything. When i did find something the downloads were dead so i dont know what fixes you are talking about thats why im asking for help
Worst case scenario, you can do the UnBrickable mod... notice there are TWO threads for this in the first few pages of the android dev section..
If youd rather not go there, keep trying to get odin to recognize by: first reinstall drivers on that computer, try different usb cable/port, try gb bootloader key combo and froyo bootloader combos (pull batt and let it sit for a few minutes before each try to make sure its really off).
If you have a diff cable on a diff port on a comp with freshly installed drivers (32bit on a 32bit machine or 64bit on a 64bit machine [or you could try mix and match]) and you try both key combos and it NEVER gets seen by odin, kill yourself.
Kidding... at that point, you can do the unbrickable mod or go to mobiletechvideos dot com (i think thats the ssite) and have them charge you to fix it.
Explicit enough?
Sent from a cell tower to the XDA server to you.
Ok so i was in my flash happy mood earlier today..
I saw that ICS slim was updated and was going to try that, well i had ICZen on my phone at the time and tried to flash Slim, well blah blah, it didnt work.. The op told me to flash from a rom that had cm9 (iczen has glitch) so i flashed Lithium MIUI--went back into recovery and started to wipe.. i wiped everything.. So i went to go flash ics slim, and as soon as i pressed 'Yes, install..' it was installing for a very short bit, then all a sudden a reboot and got stuck on the rainbow screen...
I cannot go back into recovery, but i can go into download mode.. BUT this is where the kicker is......
My computer doesnt recognize my device... ive installed driver after driver to get it to recognize. Well, no avail
Even tried installing the drivers on 6 other friends computers (at my college) and all of them still didnt recognize my device..... SMDH.. been trying to fix this all day and im pissed.
Any ideas what to do? Hate to go out and buy another phone......
And before yall say 'you cant flash miui and then go straight to ics, you have to odin' --- No, i did it all the time.. This time something went wrong and idk what
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
dpaul007 said:
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
Click to expand...
Click to collapse
yes, ive installed the nexus drivers too.. im positive its not a bad cable, ive used it on my computer before hand.. and yea, ive tried another cable as well..
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
matholomus said:
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
Click to expand...
Click to collapse
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
TopShelf10 said:
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
Click to expand...
Click to collapse
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
matholomus said:
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Click to expand...
Click to collapse
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
bfranklin1986 said:
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Did kies as well lol.. didnt work.. when it told me to connect my mobile device, i did. but it didnt register
TopShelf10 said:
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
Click to expand...
Click to collapse
i literally restarted my computer 7-9 times from uninstalling and installing driver after driver.. been doing this all morning.. no class, lol thank god. so im in the dorm getting my nerd on..
tried it again on 2 other computers (installing drivers and what not) didnt work.. Tried 2 other usb cables, didnt work..
Tried ur method of cleaning usb ports, didnt work lol.. (i blew in them/phone too)..
im currently on C.L. lookin for a new phone, I WOULD hate to have to leave the vibrant community.. yall been great with roms/drama LOL..
im slowly losing hope on this .. but im continuing to try and fix this
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Click to expand...
Click to collapse
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Woodrube said:
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Click to expand...
Click to collapse
thanks... but the aio toolbox is not going to the download link for me. the download link is down or something.
i did download the .net files tho, jus cant download the toolbox
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
That is what I am getting at.
If he can get into CWR then he can mount the phone to the computer in Mounts and Storage, put a simple 2.2 ROM on there and get it to boot up so that it works. then figure out the driver thing later on once we can get it to fully boot up.
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
Click to expand...
Click to collapse
cant reboot into the bootloader nor recovery.. the only thing i can do is download mode..
I have the GB bootloader.. im sure of it lol
and yes i installed odin and all the files on all 6 of my friends computer.. none of them worked
davil544 said:
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
if i could get into recovery, i wouldnt be posting something like this LOL.. ive unbricked my phone before (that was when my comp recognized the device, now its not)
My device is not recognized by the computer, so my sd cards dont show on the comp
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
Click to expand...
Click to collapse
oh and i did do the little tricks you said, i found that op..
that person had the same problem as me and everyone tried to help, they gave him/her links and everything.. i followed with the links too, and just like that person, none of them worked for me either
saw the download link that oldecrow posted.. its working.. downloading now
Ok. Keep trying once it is downloaded and let us know how it is going. I am getting ready to leave work soon, so I won't be on until later tonight but there are plenty of others that can help.
There's also the One-Click Vibrant DeBrick from Adam Outler. I've used it on my netbook on phones with your identical problem and its never failed yet.
Also, Heimdall on Ubuntu will flash it no problem, it does NOT need drivers like Windows does...
http://www.glassechidna.com.au/products/heimdall/
Sent from my SGH-T959 using XDA App
Up and running!!!!!!!!!!!!!!!1
NEVER WOULD HAVE THPOUGHT!! (well i did but...) anyways im up and running now!!!! Wow, idk what happened... it just started working.. i plugged it in and odin recognized it!!..
im on 2.1 again lol.. so all i need to do is go back into recovery and reinstall packages right?
Did i lose root? i forgot
So, I was thinking about giving a try the "serial console" way. Any instructions or directions on how to do it? Do I need the 623K resistor between pins 4-5 or in that state the player automatically allow the debug console?
Thanks in advance.
so wait, you flashed the wrong bootloader and now it's not working?
if so, try the ultimate resurrector thread in the dev section
I just used the guides found in the Dev section to resurrect a fully dead player... go there before you really break your player...
Actually, I accidentally flashed the wrong bootloaders & rom. I was dealing with a Galaxy S phone, at the same time. My bad. The problem is that the player is not recognized by my computer. Not even as a "S5PC110 Kit". It's like a real brick.
I think that the only way, is to go through serial console, upload the correct bootloaders and put it into download mode.
Maybe I can boot it by the SD card?! If so, anyone know how I can do it or what image I can use?
Thanks.
I don't think it allows SD card booting, but I could be wrong. When I've used the unbrickable resurrector before the device wasn't being recognized at all.. so if you haven't tried it yet it might be worth giving it a go.
If that doesn't work, you probably have to make or buy something to bring it back from the dead.
p34c3m4k3r said:
Actually, I accidentally flashed the wrong bootloaders & rom. I was dealing with a Galaxy S phone, at the same time. My bad. The problem is that the player is not recognized by my computer. Not even as a "S5PC110 Kit". It's like a real brick.
I think that the only way, is to go through serial console, upload the correct bootloaders and put it into download mode.
Maybe I can boot it by the SD card?! If so, anyone know how I can do it or what image I can use?
Thanks.
Click to expand...
Click to collapse
Have you tried this on a Linux box? The resurrector works in Linux.
If you are saying that your device is not even being shown as a SEC-S5PC110 when you plug into a usb port, I am not sure what you can do. If you flashed a wrong bootloader, I think you can still bring it back. Do a search and follow the directions found in the resurrector thread. I recovered a SEC-S5PC110 bricked device back from the dead using the method.
Good luck
Anyone with the jtag/uart diagram/pinout, at least?
Thanks.
So I have a Samsung Galaxy S2 i777 and it was stuck on a screen telling me to plug it in to a computer, which did nothing so I bought a USB Jig and it goes in to Download Mode, but now what? The phone was given to me by my brother in law who bricked it putting a ROM on it. Having jailbroken iPhone since the possibility to do so without having to manually ssh the phone or open it up has been possible, I figured, how hard can it be. I downloaded ODIN and Keis but once I get the thing in to Download mode, what do I do next? I know I am a noob and I am okay with that. I plan to learn how to do this so that I can try out different ROMS while I essentially have a spare device to do so on and not worry about bricking my HTC One X, which I got on release day long before I knew about the GS3. Help?
You're going to want to flash back to a stock ROM using Odin and start over.
Read the stickies, one of them has the information you need to do this.
Well you start by plugging it in....
Yamahar6riding said:
So I have a Samsung Galaxy S2 i777 and it was stuck on a screen telling me to plug it in to a computer, which did nothing so I bought a USB Jig and it goes in to Download Mode, but now what? The phone was given to me by my brother in law who bricked it putting a ROM on it. Having jailbroken iPhone since the possibility to do so without having to manually ssh the phone or open it up has been possible, I figured, how hard can it be. I downloaded ODIN and Keis but once I get the thing in to Download mode, what do I do next? I know I am a noob and I am okay with that. I plan to learn how to do this so that I can try out different ROMS while I essentially have a spare device to do so on and not worry about bricking my HTC One X, which I got on release day long before I knew about the GS3. Help?
Click to expand...
Click to collapse
Like stated above I would return to stock through odin or heimdall than start all over here is a good thread to get you started
http://forum.xda-developers.com/showthread.php?t=1286432
Always make sure to read and search to find answers before posting chances are someone has already posted your issue