Related
I have an LG-P509 from T-Mobile. Recently, I flashed the Megatron ROM, but was not able to unlock my "new P500". (Calls and sms worked fine, but no 3G and the phone was no longer listed as a T-Mobile device.) I cannot be without 3G service, so I reflashed the Nand backup from my original stock setup without wiping anything. Expecting the LG splash I was surprised that my phone is still running Megatron and is still listed as "P500".
What specific files are responsible for identifying a phone to a specific 3G carrier? It seems that my phone is now a "mash" of two different ROM's. I am OC'd and running just fine even though I may not be running as efficiently as possible. Any ideas or suggestions would be greatly appreciated. I would like to isolate the files needed for my phone to stay on T-Mobile and copy them into custom ROMs for convenience (and the challenge).
Thank you!
Brian
I have the same phone as you, but Im running mik's cyanogen port and ive never had the problems your having. I've never ran megatron, but I've ran several others as well and always had 3g. Your carrier and stuff like that comes from your sim card, not any files on the phone. You should give miks cyanogen mod a shot.. just make sure to follow his instructions, and wipe everything first.
Sent from my LG-P500 using XDA Premium App
That is what I thought, but when I loaded Megaton my phone was locked. I'm going to try a few T-mobile Roms & see what happens. As long as I can learn without making a brick...
Sent from my LG-P500 using XDA App
Yes you can root with z4 root http://forum.xda-developers.com/showthread.php?t=833953 and i also suggest you install a custom recovery and ROM here http://tablet-crunch.blogspot.com/20...overy-rom.html I am overclocked using Setcpu at 806mhz on megatron ROM it is a safe way to root and put in custom ROM i dont know about your phone but even rooted with setcpu it wouldnt overclock past 600 the best kernal to use is this one http://forum.xda-developers.com/showthread.php?t=929941 its very fast and fixes the touch screen bug
I posted this for someone else but it will work for you I sugest using milsos Cyogen Mod 7 for your Rom here is the link please be sure to read all instructions and its not my fault if you **** your phone up http://forum.xda-developers.com/showthread.php?t=946354
My complete phone history is as follows:
Z4Root - Successful
Thundurg Recovery v1.2.1 - Successful
Nand Backup + .android secure - got the .img to prove it
Complete wipe & SDCard format
Flashed Megaton - Successful
Opening the T-mobile My Device app results in a locked phone message. Browser will not connect to the internet. Phone & SMS work correctly.
Restored the original Nand backup from adb shell.
Phone is still running Megaton & is listed as a P500. I can overclock to 806 with no problems.
There has to be a certain file or set of files that makes the words T-mobile display at the top of the notifications.
I'm going to flash a different Rom this afternoon to see what happens.
Sent from my LG-P500 using XDA App
Hi,
I am currently using a Vibrant USA and I am running Bi-Winning v3 with the bullet kernel1.48ghz but i keep it at 1.27 max when I'm using it for most applications. I have been getting about a full 12 hour day out of a single charge while using Juice Defender ultimate.
First and Foremost I apologize if this question has been answered already, I did use all of the search tools described in the noob video
I have no complaints about Bi-Winning, I came from project-V and I have found both roms great and beautifully designed (with the trigger theme)
For my computer I am using a 27" Imac 2010 (osx 10.6.5 with current update) model with 8 gigs of ram and a core i7 processor. I recently found a program called the Winebottler. I was able to use this program to turn Odin into an Application that Mac osx can run. I am very intriuged by MIUI and CM7 as well as other roms such as Revolution rc1 however without knowing that odin will run properly I cannot try them. If odin messes up my phone install because Im not on windows then I could have corupt files that I could for that same reson not fix via Odin.
I was wondering if anyone has both operating systems or is a mac user with expierience in this issue. I have tried everything I have seen in other XDA formums telling me to use something like bootcamp or a disk partition (on my mac for dual os) but after several attempts I have not been able to get it to work at all. I would really appreciate any replies that might help me.
I was also wondering if the advantages in 2.3 would be noticable to someone who uses the phone for calls,sms,web browsing,video playback, verry little gaming(ocassional basic game like paper toss). I was also wondering if any of the 2.3 roms were fully working for everything but gps as I have a garmin for that.
One more thing, I once tried using rom manager to download and run miui 1.6.10 from project v but it gave me a hardware lock/rebootcycle wouldnt pass the vibrant samsung screen and no recovery or download mode was available. I know that It was totally my bad but that is my one expierience with flashing non edt roms.
have you tried heimdall it is a less buggy odin and it is for mac too...here is the link http://forum.xda-developers.com/showthread.php?t=755265
thanks button if i helped
Yes, try Heimdall. I think it's the only native app that will work on OSX. I use it when I'm booted into Linux too.
Thank you
Thank you for the very quick response, I am installing Heimdall as we speak Hopefully i'll be on gingerbread by morning
just be sure to follow all the instructions properly on any 2.3.4 install and you should have no need for heim/odin. of course theres always a chance of a random error. but once you get the cm7 initial kernel flashed youcan factory reset reflash from that. haven't had to odin back to stock and i've flashed cm7/miui and even tried the honeycomb 3.0 alpha rom. that was interesting. just take your time play it safe and go slow
as far as benefits go the aethetics alone to Me are worth the update to gingerbread. though i'm a pretty devout Miui fan the theming engine is gorgeous and the styles are slick.
Stability wise miui is good.
CM7 is... getting better
the Sgs II clone roms all feel solid and fast
and simply Honey is one many would swear by though i personally have yet to try it (really stuck on miui lol)
my recommendation get a few, try miui, simply honey and the sgs II clone (CM7 while awesome is still far from an excellent daily driver IMO) just flash one give it a whirl, titanium backup all your apps (not data) enter recovery factory reset, format system, cache, data, and datadata and flash the next one (fix permissions), rinse repeat till you find the one for you. No need to odin inbetween flashes. also rom manager when you enter it before using it to fix permissions set it up as 3.x to follow with teh version of clockwork recovery your using.
Simply Honey
http://forum.xda-developers.com/showthread.php?t=1021383
Miui
OC - http://forum.xda-developers.com/showthread.php?t=1099533
Standard - http://forum.xda-developers.com/showthread.php?t=1123922
SGS II Clones (take your pick both have excellent ratings)
Hybrid - http://forum.xda-developers.com/showthread.php?t=1124734
Revolution - http://forum.xda-developers.com/showthread.php?t=1131782
Bootloaders (careful with these read ALL fine print)
http://forum.xda-developers.com/showthread.php?t=1117990
So I flashed the stock JB ROM for the AT&T variant. Now, whenever I try to do pretty much anything I get a popup saying "Unfortunately, the process android.process.media has stopped." I was going to flash back to stock using the stock ROM that's posted in the development forum but the phone also won't go into media sync mode when connected to my computer (it did before flashing).
Any help would be greatly appreciated.
80ninjas said:
So I flashed the stock JB ROM for the AT&T variant. Now, whenever I try to do pretty much anything I get a popup saying "Unfortunately, the process android.process.media has stopped." I was going to flash back to stock using the stock ROM that's posted in the development forum but the phone also won't go into media sync mode when connected to my computer (it did before flashing).
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Which ROM specifically? There were some that had this issue (one of the Korean and one of the Canadian (e973 based) that were changed for the AT&T version had this issue. When you restored your apps did you restore data too? Several of the ROM's have this issue when data is included. If you restored data, then reflash the ROM and restore the apps without data.
The SnowJB ROM is the most stable 4.x rom that has all critical features (camera, GPS, etc). If you didn't flash it, you may want to give it a try.
Edit: regarding media sync, do you mean MTP? If you can't connect MTP can you connect PC software or Camera (PTP)? If those don't work then download the ROM via wifi. If nothing else, go to original development and download the CM or CFX (SR 14 or 15) roms. They are much smaller than the 4.1.2 ROM's (just under 200MB), so they'll transfer quickly via wifi (or your data plan and won't kill you plan limits, should you go the data plan root). They JB 4.2.2 and work great, but don't have working camera or GPS, so many people can't use them as DD's. They should allow you to connect MTP so you can copy a different 4.1.2 ROM to you device.
dbgeek said:
Which ROM specifically? There were some that had this issue (one of the Korean and one of the Canadian (e973 based) that were changed for the AT&T version had this issue. When you restored your apps did you restore data too? Several of the ROM's have this issue when data is included. If you restored data, then reflash the ROM and restore the apps without data.
The SnowJB ROM is the most stable 4.x rom that has all critical features (camera, GPS, etc). If you didn't flash it, you may want to give it a try.
Edit: regarding media sync, do you mean MTP? If you can't connect MTP can you connect PC software or Camera (PTP)? If those don't work then download the ROM via wifi. If nothing else, go to original development and download the CM or CFX (SR 14 or 15) roms. They are much smaller than the 4.1.2 ROM's (just under 200MB), so they'll transfer quickly via wifi (or your data plan and won't kill you plan limits, should you go the data plan root). They JB 4.2.2 and work great, but don't have working camera or GPS, so many people can't use them as DD's. They should allow you to connect MTP so you can copy a different 4.1.2 ROM to you device.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2127346
"debloated AT&T" is what I'm using (sorry I didn't make that clear, I've been fighting this all day).
Yes, I do mean MTP. I actually just tried to use PC software and camera with no luck. I tried wiping everything, reflashing the ROM and applying the permission fixes in CWM but the errors still occur.
I'm trying to grab CFX via wifi now. Thanks for the help!
80ninjas said:
http://forum.xda-developers.com/showthread.php?t=2127346
"debloated AT&T" is what I'm using (sorry I didn't make that clear, I've been fighting this all day).
Yes, I do mean MTP. I actually just tried to use PC software and camera with no luck. I tried wiping everything, reflashing the ROM and applying the permission fixes in CWM but the errors still occur.
I'm trying to grab CFX via wifi now. Thanks for the help!
Click to expand...
Click to collapse
Format /system in cwm? Just curious...
Sent from my LG-E970 using xda app-developers app
80ninjas said:
http://forum.xda-developers.com/showthread.php?t=2127346
"debloated AT&T" is what I'm using (sorry I didn't make that clear, I've been fighting this all day).
Yes, I do mean MTP. I actually just tried to use PC software and camera with no luck. I tried wiping everything, reflashing the ROM and applying the permission fixes in CWM but the errors still occur.
I'm trying to grab CFX via wifi now. Thanks for the help!
Click to expand...
Click to collapse
Some other tricks that fixed similar issues for others:
1) use a different USB port
2) use a different USB to micro cable
3) reboot PC/Laptop (standard windows fix is to reboot 3 times, to see if it fixes the prob, before calling their helpless desk). I had to do this when I disconnected the phone without switching to charge only. I seem to recall that it took 2 reboots to finally get everything reset, so Windows would recognize the device was connected.
Jank4AU said:
Format /system in cwm? Just curious...
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the input. I actually tried that when I reflashed the ROM but it didn't help.
dbgeek said:
Some other tricks that fixed similar issues for others:
1) use a different USB port
2) use a different USB to micro cable
3) reboot PC/Laptop (standard windows fix is to reboot 3 times, to see if it fixes the prob, before calling their helpless desk). I had to do this when I disconnected the phone without switching to charge only. I seem to recall that it took 2 reboots to finally get everything reset, so Windows would recognize the device was connected.
Click to expand...
Click to collapse
I actually tried three different cables and two different machines in completely separate locations but the problem persisted throughout all. I did try rebooting twice last night. Didn't go for a third.
I finally got CFX on it this morning and the phone was recognized by the computer immediately. I'm going to flash SnowJB onto it to see if the same thing happens.
Thanks for the help!
The phone has been working great on Android 4.1.2 as I describe in the thread ( Optimizing [Rom][I605VRAMC3][4.1.2])
Found Here: http://forum.xda-developers.com/note-2-verizon/help/rom-optimizing-t2817294
EXCEPT NOW, every time I boot the phone, I get a message that says All the APPS are upgrading automatically . I think the problem is related to me Using Titanium Backup to Freeze SDM 1.0 . The reason I froze SDM 1.0 was to stop the Nag from Verizon for a firmware update .
Anyone know what I need to freeze to stop the auto upgrading on every boot? It really slows down the boot time.
Thanks in advance
You probably did this already, but double check to make sure Play Store is not set to Auto Update apps. Can. be found in Play Store. settings. I don't believe that freezing SDM would play a role here, but I've been wrong before.
Sent from my SCH-I605 using XDA Premium 4 mobile app
mattnmag said:
You probably did this already, but double check to make sure Play Store is not set to Auto Update apps. Can. be found in Play Store. settings. I don't believe that freezing SDM would play a role here, but I've been wrong before.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks , Play Store was set to auto update so I changed it , I just tried your suggestion and I rebooted . I'm still getting the same message while booting: Android is updating.............................................................................
doctor-cool said:
Thanks , Play Store was set to auto update so I changed it , I just tried your suggestion and I rebooted . I'm still getting the same message while booting: Android is updating.............................................................................
Click to expand...
Click to collapse
Hmmmm.... It's probably still working on updating apps that it started working on previous to disabling the auto update.
This might work..... Toggle off your wifi and data, then try going to phone Settings, Application manager, All Apps... then force close the Play Store and wipe the app data. Then open the Play Store again and it should go straight to settings area. Set it to " Do not Auto Update apps " and then back out of Play Store, turn wifi/data back on, and go back into Play Store and sign into the app again/change any other settings back to how you like them . I hope that will stop the auto update.
Sent from my SCH-I605 using XDA Premium 4 mobile app
mattnmag said:
Hmmmm.... It's probably still working on updating apps that it started working on previous to disabling the auto update.
This might work..... Toggle off your wifi and data, then try going to phone Settings, Application manager, All Apps... then force close the Play Store and wipe the app data. Then open the Play Store again and it should go straight to settings area. Set it to " Do not Auto Update apps " and then back out of Play Store, turn wifi/data back on, and go back into Play Store and sign into the app again/change any other settings back to how you like them . I hope that will stop the auto update.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Everything worked just like you predicted except when I reboot the phone it says "Android is updating 1,2,3..........................................88 ...................................
doctor-cool said:
Everything worked just like you predicted except when I reboot the phone it says "Android is updating 1,2,3..........................................88 ...................................
Click to expand...
Click to collapse
For a test,
I cleared data and disabled the Play Store, Turned off data and wifi . REBOOTED I'm still getting the same message while booting: Android is updating.......................................... ...................................
Now I'm thinking the problem is due to me flashing Gapps.
I flashed (HDPI / MDPI / TINY: gapps-jb-20121011-signed.zip) for Android 4.1.1 – 4.1.2 – Jelly Bean, from http://www.teamandroid.COM/gapps/
I probably shouldn't have flashed it on top of the official stock 4.1.2 Verizon ROM. I probably have two version of Gapps on my phone competing with each other. The quickest thing would probable be to re-flash to the OEM [Rom][I605VRAMC3][4.1.2]
doctor-cool said:
Everything worked just like you predicted except when I reboot the phone it says "Android is updating 1,2,3..........................................88 ...................................
Click to expand...
Click to collapse
Ok.... I just realized that this has nothing to do with the Play Store App or updating your apps.... Your actual phone system is optimizing at boot screen.... like this pic, right?
Sent from my SCH-I605 using XDA Premium 4 mobile app
I'm not in any way a developer or expert.... this stuff is just a hobby for me...so please understand these are just my thoughts to hopefully help and not make things worse for you. With that said, I suspect you have an app or script (or something) that is doing something like wiping the Dalvik cache with each reboot, which is triggering your phone to run through the optimization process each time you boot. I am pretty confident this has nothing to do with SDM being frozen. I'm not sure about gapps with stock. Why do you need that if your running stock?
Sent from my SCH-I605 using XDA Premium 4 mobile app
Anyhow, What ROM do you recommend ? I'm using my phone to do Wave Accounting and Pay Pal transactions so I cant have down time.
doctor-cool said:
Anyhow, What ROM do you recommend ? I'm using my phone to do Wave Accounting and Pay Pal transactions so I cant have down time.
Click to expand...
Click to collapse
Sorry for being off base with my initial thought on your above post... It's been a long week at work and I'm tired.... so that's my excuse...
I hope you get it sorted out with what's causing your phone to upgrade/optimize apps at each reboot. I did a Google search just now and apparently, this is common issue asked on XDA. I found several comments from people saying they think something causes the Dalvik/Cache to get wiped on reboot. I also read where someone reported that flashing Gapps did the same thing to them. If you're going to flash a new ROM, that should take care of the problem when you wipe things for the new flash.
On the XDA forums, it's generally frowned upon to ask for ROM recommendations. But for me personally, I have decided to settle (for now) on Beanstown106's JellyBeans ROM Build 22 which is based off of 4.1.2. I think this was the last 4.1.2 based Rom (for our SCH-I605's) that he did for his JellyBeans ROM before he moved on to developing for 4.3 MJ9, so I think a lot of the bugs were worked out of it.
I love the ROM and I've tried out several others. I always end up coming back to it because it's really stable and (pretty much) everything works. And with Xposed Modules and his built in options, I can tweak everything to how I like it.
You can still grab his older JellyBeans ROM build 22 by going to the current Alliance Rom Thread here: ( http://forum.xda-developers.com/showthread.php?t=2032447 ), and then going to the "Downloads" area right above the thread title. The ROM Filename is: note2_JellyBeans_B22.zip.
There's tons of great ROM's for our phone and there's so many talented developers..... so I truly think you have to read through the threads on each of the ROM's to make a decision for your personal needs... but I know that JellyBeans Build 22 is very stable if that's what you're wanting. If you decide to try out JellyBeans Build 22, let me know if you need help with instructions for flashing it. I saved the install instructions for future reference when I flashed it the first time last year, but I don't see those old install instructions any place now that he's moved on to developing for the updated 4.3 build.
mattnmag said:
Sorry for being off base with my initial thought on your above post... It's been a long week at work and I'm tired.... so that's my excuse...
I hope you get it sorted out with what's causing your phone to upgrade/optimize apps at each reboot. I did a Google search just now and apparently, this is common issue asked on XDA. I found several comments from people saying they think something causes the Dalvik/Cache to get wiped on reboot. I also read where someone reported that flashing Gapps did the same thing to them. If you're going to flash a new ROM, that should take care of the problem when you wipe things for the new flash.
On the XDA forums, it's generally frowned upon to ask for ROM recommendations. But for me personally, I have decided to settle (for now) on Beanstown106's JellyBeans ROM Build 22 which is based off of 4.1.2. I think this was the last 4.1.2 based Rom (for our SCH-I605's) that he did for his JellyBeans ROM before he moved on to developing for 4.3 MJ9, so I think a lot of the bugs were worked out of it.
I love the ROM and I've tried out several others. I always end up coming back to it because it's really stable and (pretty much) everything works. And with Xposed Modules and his built in options, I can tweak everything to how I like it.
You can still grab his older JellyBeans ROM build 22 by going to the current Alliance Rom Thread here: ( http://forum.xda-developers.com/showthread.php?t=2032447 ), and then going to the "Downloads" area right above the thread title. The ROM Filename is: note2_JellyBeans_B22.zip.
There's tons of great ROM's for our phone and there's so many talented developers..... so I truly think you have to read through the threads on each of the ROM's to make a decision for your personal needs... but I know that JellyBeans Build 22 is very stable if that's what your wanting. If you decide to try out JellyBeans Build 22, let me know if you need instructions for flashing it. I saved the install instructions for future reference when I flashed the first time last year, but I don't see those old install instructions any place now that he's moved on to developing for the updated 4.3 build.
Click to expand...
Click to collapse
Thanks and right on time, After I did my return to stock I thought I needed to wipe both caches' and the system to be able to do a Titanium backup.
I lost my operating system and Odin didn't recognize my phone, I was looking for a 4.1.2 zip file at the time I found your post. THANKS!
I'm downloading now
doctor-cool said:
Thanks and right on time, After I did my return to stock I thought I needed to wipe both caches' and the system to be able to do a Titanium backup.
I lost my operating system and Odin didn't recognize my phone, I was looking for a 4.1.2 zip file at the time I found your post. THANKS!
I'm downloading now
Click to expand...
Click to collapse
When you say you returned to stock, I'm hoping you didn't ODIN flash a full stock version of 4.1.2, because that would have relocked your bootloader and removed the custom recovery and root. If you were able to use Advance wiping features, you must still have some sort of custom recovery on your phone.
Hopefully, you do so you can flash a zipped ROM back onto it. If you've still got an unlocked bootloader and have a custom recovery, you may want to try to flash this root/modified version of "stock" 4.1.2:
( http://forum.xda-developers.com/showthread.php?t=2261478 ). It was also made by Beanstown106 and the thread still has instructions.
Also, you may do some Google searching to find tips on how to get your computer/ODIN to recognize your phone in download mode again... the most common tips I've seen are to try to uninstall and reinstall the Samsung drivers on your computer...and to try different USB cables and different USB ports on the computer.
I'm exhausted and I'm going to bed, but here are the original install instructions posted by Beanstown106 for JellyBeans ROM Build 22 if needed.
------------------------
"(INSTRUCTIONS) YOU MUST BE UNLOCKED
Step 1-
Make sure u are unlocked
Step 2-
Wipe all(factory reset and davlick wipe) if coming from an old build
Step 3-
Install the Rom (flash it in your custom recovery)
Step 4-
Reboot and Enjoy!"
-------------------------------------
Hope that helps. (Also, if Beanstown's stuff helps you... I'd encourage you hitting the thanks button for all his hard work )
mattnmag said:
When you say you returned to stock, I'm hoping you didn't ODIN flash a full stock version of 4.1.2, because that would have relocked your bootloader and removed the custom recovery and root. If you were able to use Advance wiping features, you must still have some sort of custom recovery on your phone.
Hopefully, you do so you can flash a zipped ROM back onto it. If you've still got an unlocked bootloader and have a custom recovery, you may want to try to flash this root/modified version of "stock" 4.1.2:
( http://forum.xda-developers.com/showthread.php?t=2261478 ). It was also made by Beanstown106 and the thread still has instructions.
Also, you may do some Google searching to find tips on how to get your computer/ODIN to recognize your phone in download mode again... the most common tips I've seen are to try to uninstall and reinstall the Samsung drivers on your computer...and to try different USB cables and different USB ports on the computer.
I'm exhausted and I'm going to bed, but here are the original install instructions posted by Beanstown106 for JellyBeans ROM Build 22 if needed.
------------------------
"(INSTRUCTIONS) YOU MUST BE UNLOCKED
Step 1-
Make sure u are unlocked
Step 2-
Wipe all(factory reset and davlick wipe) if coming from an old build
Step 3-
Install the Rom (flash it in your custom recovery)
Step 4-
Reboot and Enjoy!"
-------------------------------------
Hope that helps. (Also, if Beanstown's stuff helps you... I'd encourage you hitting the thanks button for all his hard work )
Click to expand...
Click to collapse
Thanks I used JellyBeans ROM build 22 just to have a system so that I could get to Odin. Then I did flash the full stock version of 4.1.2 then I used the Casual method to unlocked the boot-loader and reinstall WIN recovery and root. As explained here http://forum.xda-developers.com/note-2-verizon/help/rom-optimizing-t2817294. ( I ran into some driver issues between Casual and Odin but they were resolved)
Actually I have three Samsung i605's.
I have one that has got all the Verizon OTA updates, never tampered with it's on 4,4,2.
I have the one we have been talking about I have restored it to the fully stock version of 4.1.2 with Root.
And the last one I am experimenting with DN3 (Ditto Note 3) for fun and knowledge.
doctor-cool,
That's great. Glad you got it fixed.
And that's pretty cool to have extra devices to work with. Must be nice.
Sent from my SCH-I605 using XDA Premium 4 mobile app
help guys i know you can
Sent from my SM-N900P using XDA Premium 4 mobile app
R1000 said:
help guys i know you can
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You will need to give a little more information to get some help.
Please include:
model of your phone
modem/baseband currently on your phone (settings, general,about phone)
firmware version (same location)
recovery installed (if you're currently rooted) or recovery attempting to use
root method being used
flashing steps taken
ROM or ROMs flashed
I know its a long list but it will go a long way towards getting the help you need.
Good luck
Note 3 sm900p lean kernel now I flashed Cm 11
Sent from my SM-N900P using XDA Premium 4 mobile app
R1000 said:
Note 3 sm900p lean kernel now I flashed Cm 11
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What exactly is your question? I don't actually see what you were trying to do and what went wrong.
One of the biggest problems that people have when trying to flash a 4.4.4-based ROM is that their bootloader is still based on NC5, not NH7. If you want to flash anything newer, you'll have to update your phone to NH7 before flashing a 4.4.4 ROM.
I put together this post when helping another person out on another thread. I think it'll work as a step-by-step guide for you:
I'll explain how to install a custom ROM and some common things to think about/check prior to installing anything:
Installing a Custom ROM
Step 1 - Gather Information
First off, you need to know what version of Android your phone currently is running. This is easily done by looking in the Settings Menu -> General -> About Device.
The Main things we are looking at on this screen are Software Version, Model Number, Android Version, and Baseband Version. I'll explain these (to the best of my knowledge) below:
Software Version:
This is the "type" of Android that you're running. Rather than quoting the entire name, we typically only refer to the last 3 characters (MJ4, NAB, NC5, etc.). Stock Note 3 devices will (most-likely) be running one of 3 different versions of TouchWiz (TW):
MJ4 - This is the last Jellybean version of TW for the Sprint Note 3NAB - This is the first KitKat TW version for the Sprint Note 3NC5 - This is the second KitKat TW version for the Sprint Note 3NH7 - This is the latest KitKat TW version for the Sprint Note 3
The reason that we are concerned with the Software Version is that between the MJ4 and NAB versions, there were major changes. So if you're running MJ4, you will have to do additional steps before flashing a custom ROM based on a newer version. And if you're on NAB or NC5, you will not be able to go back to MJ4, so beware what you're flashing.
For the most part, if you're on NH7, you can flash either a NH7 or NC5 custom ROM, but just read the ROM's FAQ to see if there are any issues with doing so.
Model Number:
Most people don't worry about this, but I always do when looking at a new ROM. The Sprint Note 3 is different from the Verizon Note 3, which is also different from the International Note 3. It's always best to double-check that the ROM you're trying to install is truly meant for your device. This simple check will prevent a LOT of potential issues you'll get when installing a ROM.
Android Version:
This is just an additional check to the Software Version. Always best to know.
Baseband Version:
The Baseband is, unless I'm mistaken, the "kernal" for the phone's cellular and 4G radios. Sometimes upgrading (or downgrading) the Baseband can help with signal strength and reception. Some users have noted that they got better reception on older Baseband versions. I haven't personally looked into it and the reports from other users seem somewhat anecdotal, but it's good to know which Baseband you're on.
The Baseband is independent from the ROM version, so you can run an older Baseband (MJ4 or NAB) on a newer ROM (NC5), and vice-versa.
The last bit of information you need to know is the Bootloader Version. The way to find this information is to reboot your device. When you see the text on the screen, you should look for the Bootloader Version. It'll be a long string of characters, but you're only looking for the last 3 (MJ4, NAB, or NC5).
Once you have all the above information, you should be ready to start the fun process of preparing your phone to flash your first ROM.
Step 2 - Backup your Media
First thing: Backup all of your media to your computer. If there's pictures/music/videos/recordings you don't want to lose, back them up. It's just good practice. Don't lose all your cat pictures because you flashed something and it somehow erased your internal storage. I tend to keep everything of importance on the External Storage, but there are times where even external storage can be wiped, so it's best to back up everything to a PC.
Step 3 - Upgrade your Phone to the latest Stock ROM (NH7)
This only is a MUST applies if you're running an older version and want to install a NH7 ROM. Most continually-developed ROMs are either NC5 or NH7 now, so the first things first: Update your phone to NH7.
Go over to micmar's thread and download the One-Click File. It will remove Root, but don't worry, because when you install a new ROM, it will automatically include root access.
Follow the instructions in his thread and your phone will now be fully upgraded.
At this point, your "About Device" should show the following:
Software Version: N900PVPUCNH7
Android Version: 4.4.4
Baseband Version: N900PVPUCNH7
Reboot your phone and let it sit for a minute so it can get it's bearings.
Step 4 - Install a Custom Recovery
So far, we've been flashing everything in ODIN. Now, we're going to use ODIN one last time to flash a custom recovery, so that you can flash custom ROMs without the need of a computer.
The most-commonly used Custom Recovery is TWRP (XDA Link). You'll want to use the latest version, 2.8.0.
Flash this in ODIN. You should use the "PDA" or the "AP" Slot.
Reboot your phone to make sure it works correctly.
Step 5 - Make a Nandroid Backup of your device
If you don't know what a Nandroid backup is, don't worry. It's basically just taking your phone as is and making a backup of it. In case you make a mistake or flash a bad download of a ROM, this allows you to restore your system. I always keep my backups on the External Storage (microSD Card), so in case I have to wipe my internal storage, it's not a big deal. You can also copy the files over to your PC, just to be more paranoind about your nandroid backups (rhyming is fun!).
You do this by restarting into Recovery (power down device, hold down home button and volume up while powering on phone).
Once in TWRP, go to "backup." Make sure the storage selected is "external storage." This screen will have various options of what to backup. I typically choose everything except external storage. Typically, backups range from 1-2 Gigs.
For me, backups typically take 5-10 minutes to do. In my opinion, this is totally worth it, since I can always restore a backup with no issues.
Step 6 - Install a Custom ROM
Once you choose your custom ROM from the Development Section, follow the instructions on the original post to install it. I'll give a general outline of what I do whenever installing a new ROM, but sometimes a custom ROM will have specific instructions, so you want to make sure to read the posts carefully.
Generic Instructions for Installing a ROM:
Download ROM and check the md5
Internet being spotty in my area, I always check the md5 to make sure that the file downloaded correctly. You can check the md5 using this windows program or using a file explorer on your phone like ES File Explorer. I always copy the ROM zip file to my external SDcard.
Reboot to Recovery
Wipe Data, System, Cache, and Dalvik Cache
This is called a "Clean Wipe," meaning it will wipe out your installed Apps and the data associated with them. Some people will claim that "Dirty Flashing" (i.e. not wiping the above) is OK, but I've seen too many apps Force Closing (FC-ing) when dirty flashing. Also, if you dirty-flash and encounter an issue with a ROM, the first piece of advice is to do a clean install. Might as well do that initially and hopefully not run into any issues.
Install the Custom ROM
Pretty straight-forward on how to do this... just click "Install" and then browse to the place your copied the ROM zip file.
Reboot your phone and run through the typical initial start-up information (google account, etc).
Once you get your phone set up the way you like (apps, accounts, wifi passwords, etc), I'd make another Nandroid backup, just so you have one where it's setup with everything you need. This will make any issues less painful, since you'd restore a backup that's already setup.
Step 7 - Further Considerations
If you ever want to try a new ROM, all you have to do is repeat step 6. Beware, though, people easily become flashaholics when they first figure this stuff out.
If you were paying attention to my "Generic Instructions" when installing a ROM, you'd notice that every time you do a Clean Install of a ROM, you lose all your apps... All of your Angry Birds 3-Star levels are gone!
Well, there are ways to get prevent losing that data... One is by "Dirty Flashing" (Not wiping the "system" or "data" partitions before flashing a ROM in TWRP). This is common practice among users here on XDA, but is typically frowned upon by ROM devs. I've noticed that a good number of issues on ROM threads stem from people Dirty Flashing. It typically causes more problems than it solves.
The other way of backup up and restoring app data (prior to wiping) is by using Titanium Backup. I could write up a long post on how to use Titanium Backup (TiBu), but the main things to remember are the following:
White line items are fine to be restored (both Data and Apps).
Restoring Yellow line items is typically OK (Data only).
Restoring system apps or data (red line items in TiBu) is typically a bad idea.
I've been using TiBu for the past 2-3 years and it's typically worked like a charm. Sometimes, when there's a major Android Update (like from JellyBean to KitKat), it can become broken, but the Developer is really responsive and gets it to work within a few weeks. If you upgrade to PRO, you can schedule automatic app backups (I backup all my user apps every night at 3am). You can also restore apps/data from Nandroid Backups (which is great if you do a Nandroid backup but had forgotten to update your TiBu backups).
In Summary
Whew, that was a lot to write... I'm a Structural Engineer, not a Software Engineer, so I don't know the technical side of things like bootloaders or basebands, but hopefully none of the information I provided was false.
Anyways, let me know if you have any problems with the install. I appreciate any feedback!
Click to expand...
Click to collapse
I hope this helps, but please, in the future, write out your question clearly and provide as much information as possible, that way we can help you quickly and efficiently.
Cheers!
-Topher
OK I noticed that thanks again I finally found a 4.4.4 Cm Rom working awesome very little glitch but can deal with I have no way to update without pc
Sent from my SM-N900P using XDA Premium 4 mobile app
Why does titanium backup not save from deletion says no external backup detected
Sent from my SM-N900P using XDA Premium 4 mobile app
No data sorry
Sent from my SM-N900P using XDA Premium 4 mobile app
Running pac man rom Cm no data
Sent from my SM-N900P using XDA Premium 4 mobile app
Thanks
Sent from my SM-N900P using XDA Premium 4 mobile app
R1000 said:
Running pac man rom Cm no data
Click to expand...
Click to collapse
Ok, you haven't fully answered the questions myself and @jdelano asked you. If you cannot answer these questions, we will be unable to help you.
Phone Model: Note 3 sm900p
Phone Modem/Baseband: Unanswered
Firmware version: Unanswered
Recovery installed: Unanswered
Root Method: Unanswered
Flashing Steps: Unanswered
ROM flashed: CM11, pac man rom (no build number/date given, please provide a link to the thread you flashed from)
Are you a Sprint Customer, or have you flashed your phone to another carrier?
What is the issue you're having: No data when on CM 4.4.4 ROMs.
I am in the process of downloading/installing the PacMan ROM in this thread. The file I will be flashing is the pac_hltespr__20141110-124721.zip and the Gapps modular package from this thread, filename: pa_gapps-modular-full-4.4.4-20141121-signed.zip.
EDIT: By following the steps in my previous post, I was able to install the PacMan ROM with Gapps and all worked well. I had data, root access, and was able to wifi tether... Please answer the questions I asked before, especially what version is your baseband, as I suspect that's the main issue that you have.
Nc5
Sent from my SM-N900P using XDA Premium 4 mobile app
Y'all packing works great little glitchy phone turns on an off but all good all Cm roms I end up with no data I have Phil's recovery beast kernal average gapps had to update su binary any time I flash cm and it changes my recovery sometimes I cannot format SD card or I will loose all files I have no PC even if I use drop box titanium doesn't work the way it use to can save apps from deleting with confirmation so what's a stable cm Rom or slim rom and gapps or do you have knew updated tw rom rooted I have update my boot loader so
Sent from my SM-N900P using XDA Premium 4 mobile app
R1000 said:
Nc5
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Phone Model: Note 3 sm900p
Phone Modem/Baseband: NC5
Firmware version: Unanswered
Recovery installed: Unanswered
Root Method: Unanswered
Flashing Steps: Unanswered
ROM flashed: CM11, pac man rom (no build number/date given, please provide a link to the thread you flashed from)
Are you a Sprint Customer, or have you flashed your phone to another carrier?
What is the issue you're having: No data when on CM 4.4.4 ROMs.
Click to expand...
Click to collapse
As I stated in my first reply to you, the issue is that your phone is still on the NC5 bootloader. In order for 4.4.4 ROMs to play nicely on your phone, you'll need to update it to NH7. This is also stated in my previous post. You need to follow those instructions to the letter (particularly Step 3) in order to update it. You must use a computer to flash the update file, as Mobile ODIN is not able to update the bootloader. You need to get access to a computer (work, library, friend who owes you $20, someone at Starbucks).
Until you follow those steps, I doubt any 4.4.4 ROM will work correctly on your device.
Exposed frame work not compatible with roms only tw anyone have zip for NH7 u date with root
Sent from my SM-N900P using XDA Premium 4 mobile app
R1000 said:
Exposed frame work not compatible with roms only tw anyone have zip for NH7 u date with root
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is the first you've mentioned XPosed Framework... What exactly are you trying to do with it?
I don't know where you've gotten your information from, but I know for a fact that XPosed is compatible with all 4.4.4 AOSP ROMs as well as all TW ROMs. XPosed is NOT compatible with 5.0+ Roms. I'm currently using it on my "daily-driver" ROM, which is based on 4.4.4 AOSP.
R1000 said:
Y'all packing works great little glitchy phone turns on an off but all good all Cm roms I end up with no data I have Phil's recovery beast kernal average gapps had to update su binary any time I flash cm and it changes my recovery sometimes I cannot format SD card or I will loose all files I have no PC even if I use drop box titanium doesn't work the way it use to can save apps from deleting with confirmation so what's a stable cm Rom or slim rom and gapps or do you have knew updated tw rom rooted I have update my boot loader so
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, lets get you to a known platform with your phone so you can use 4.4.4 TW or AOSP ROMs.
#1. Load latest stock firmware and software
[Stock ROM] Odin flashable N900PSPTDNH7Follow the instructions EXACTLY
Now make sure you boot stock NH7, let it get data and update your profile and PRL by doing:
go to Settings -> General -> System Update, then select Update PRL (wait for it to do its thing), then Update Profile (again wait for it.)
Now we know you're on the most current stock software available and we've updated your profile and PRL (preferred roaming list)
#2. Root stock NH7 acquired in step #1
Go here Download philz_touch_6.48.4-hlte.tar.md5 (save it in the same folder you have Odin in from Step #1)Go Download SuperSU-v2.37.zipCopy the zip to your phone's sd cardUse Odin to put philz_touch_6.48.4-hlte.tar.md5 on your phone (same basic steps you used to Odin NH7) - Make sure you UNCHECK rebootOnce odin is finished and you see PASSED on the screen, unplug your phone from your computer then press Volume UP + HOME + POWER and hold all 3 until the phone reboots and you see blue words "Recovery Booting ..." at the top of the screen - Philz recovery will startnow select install zip -> choose zip from /sdcard -> scroll all the way to the bottom and select the SuperSU-v2.37.zip file -> select Yesonce finished press back until you get to the main recovery menu and select Reboot to System
#3. Update SuperSU binaries
Once your rebooted, Open Apps drawer, open SuperSU, say no to disable knox, it will ask about updating binaries, select yes, select normal, wait until it says its finished.Now you are Rooted Stock NH7You can now flash any 4.4.4 TW-NH7 or AOSP hltespr ROM - make sure to follow each Post #1 instructions on the ROM you choose and of course backup before flashing anything new
I hope this gets you to where you want to be, good luck.
Theres a lot of patience being displayed here. One should never start messing with their phone unless they have even the slightest clue what they are doing from the start
piaa_nissan said:
Theres a lot of patience being displayed here. One should never start messing with their phone unless they have even the slightest clue what they are doing from the start
Click to expand...
Click to collapse
The amount of patience I am seeing is mind blowing! To the OP...Just some words of advice. I have been a member of XDA for alot of years now and I can tell you that you will get a tremendous amount of help from this community. My only suggestions would be,when looking for help:
1) Be very clear as to the question you are asking.
2) If someone is willing to help you, Give them all of the information that they are asking you for.
3) Punctuation goes a very long way when someone is trying to understand what you are asking. Try using a period to avoid run on sentences.
Please do not take this as anything other then what I have learned over the years to get the best and quickest help!
I hope these guys are able to help you with your issues! :fingers-crossed: