Hello there,
I Have an old phone which i want to use as a media player.
I tried to install a few VNC Servers for WM5, but that wasn't workable.
I Wonder if there is an application which i can run on my old phone, and then control the playing streams or MP3 files via a web-interface or something.
Something like VLC has, but there isn't a VLC for WM5 with an HTTP interface as far as i know.
Thx in advance.
You can try Pocket Player from Conduits (www.conduits.com). Their SW acts as UPNP Server or Agent, i.e. you can either stream SW from the device elsewhere or receive streams from other servers. I think that there were also programs to remote control WMP, but I have never used them.
You need to define for your purpose what shall be done where:
- control the playback
- Audio output
- media data
Related
I am about to purchase a NAS device to act as a home media server.
So far my short list includes:
Synology Disk Station DS210j
QNAP TS-210 Turbo NAS
Some of them support iTunes server and can stream music to an iPhone. Surely there is a way to do this on the Eris! Is there an iTunes client for Android 1.5 or perhaps a better way to do this?
Any help appreciated!
dont know anything about android, but my nas drive packed in and i got a new one from pc world. i thought it was a nas drive but wasnt it was a network media storage, my ameo couldnt pick it up at all because it wasnt a nas drive, pc seen it fine and could map. hope this is of some help. make sure its nas.
Not sure if your NAS device supports Upnp, but if it does like windowns 7 and can share media as Pictures Music and Videos, I found a program on the market that I could access the files on the computer over my network, the music would work but I couldn't get the videos to play. Search for UPNP on the market, I'll post the program later when the gf brings her phone around. There was a similar program on the Ipod touch, although it was able to play the video files, probably missing a codec in android.
The program was Andromote... if you have windows 7 set up sharing all the media on your nas you would be able to access it.
if a mod reads this, can you pull the restriction.. I don't post much but have used the site for quite a while. Thanks.
It's not exactly graceful, but I use MPD (Music Player Daemon), PMix (an Android client for MPD), and A Online Radio to stream my music collection to my Droid Eris (via Icecast). Unfortunately, the native Droid media player doesn't support the usual streaming protocols, but the above combo works. When I'm outside my home network, I use a web based client for MPD and have my Icecast port forwarded on my router. If the NAS device you pick up supports Linux, you should be able to install MPD and Icecast (both are available in most distros); the Market has both PMix and AOR for free.
The protocol iTunes uses for streaming audio is called DAAP, but I'm unaware of any DAAP clients on the Android platform yet. Searching google for "Android DAAP" led me to a site which offers a client application to control iTunes from Android, but not client. Again, if the NAS system runs Linux but doesn't provide a DAAP server, you can possibly install Firefly Media Server (formerly mt-daap) to mimic the fuctionality. However until there's a client, there is little point.
Only been playing with it for a little bit, but there's a new VLC compatible streaming client available on the Market called VLC Stream & Convert.
It allows you to run VLC on a client on your lan (be sure to add the Web control interface from VIEW/ADD INTERFACE) and connect to it. You can either remote control VLC from the phone....or..you can stream video to your phone from the client side app with a simple filesystem browser.
Though the realtime conversion and streaming isn't the best quality it's most definitely handy and orders of magnitude more seamless than dealing with DLNA.
Maybe everyone else isn't a hardcore media geek with terabytes of video spread about a home lan like me. But this addition to the market makes me happy!
Thought I'd share.
Scott
This looks really cool. Will definitely try this tomorrow after work!
Sent from my SGH-T959 using XDA App
masterotaku said:
Only been playing with it for a little bit, but there's a new VLC compatible streaming client available on the Market called VLC Stream & Convert.
It allows you to run VLC on a client on your lan (be sure to add the Web control interface from VIEW/ADD INTERFACE) and connect to it. You can either remote control VLC from the phone....or..you can stream video to your phone from the client side app with a simple filesystem browser.
Though the realtime conversion and streaming isn't the best quality it's most definitely handy and orders of magnitude more seamless than dealing with DLNA.
Maybe everyone else isn't a hardcore media geek with terabytes of video spread about a home lan like me. But this addition to the market makes me happy!
Thought I'd share.
Scott
Click to expand...
Click to collapse
You may have just solved a problem for me... I am having some issues though.
I have it installed and working. I find my VLC player through the app and can start videos no problem, but there is no audio.
What AAC encoder are you using on your system? Im running on Win7 and cant seem to get it working.
ritalin said:
You may have just solved a problem for me... I am having some issues though.
I have it installed and working. I find my VLC player through the app and can start videos no problem, but there is no audio.
What AAC encoder are you using on your system? Im running on Win7 and cant seem to get it working.
Click to expand...
Click to collapse
On all the PC's on the home lan I now only ever install VLC, Media Player Classic Home Cinema, and FFDSHOW. VLC's built in AAC decoder generally handles things fine, but if it gets confused (in the case of some encodes with weird FOURCC headers) FFDSHOW usually picks up the slack externally.
I'll run through my collection (it's well over 3 terabytes now so it might take a bit) and see if I run across anything with AAC that this stumbles over. I'm running Win7 x64 on this laptop, so it'll be my guinea pig.
I have a good idea of a few known encodes I have with weird AAC audio header info, primarily because they also won't play natively correctly in the phone's built in video player or rock player. I'll let you know what I find out.
EDIT: Well that didn't take long. It seems that the same encodes with .AAC audio that give the built in player grief (as well as Rockplayer) also refuse to have their audio play correctly in this streaming app. Even more interesting, these all play natively within VLC on the desktop. However, VLC, FFDSHOW, and my universal backup plan when encountering weird stuff that won't play (KMPlayer) all use LIBFAAD for .AAC decoding. Upon further investigation it appears that some .AAC profiles (there are actually six baseline types of .AAC audio...go figure) aren't properly supported by Android's native .aac parser (found this info on DoubleTwists support forums).
Looks like this is a native flaw in Android itself at this point. Going to investigate further. Thank god that there are literally only a handful of encodes in my collection that have this problem or I'd be pulling my hair out.
Can someone show me how to use this to stream over 3G??
I opened ports on my router and got my WAN IP entered but it won't let me connect.
Did you enable the Web Interface in VLC on the client PC? It is not on by defaut.
Start VLC on a PC on your lan, go to the VIEW menu....ADD INTERFACE...WEB INTERFACE. With that selected the android client should automatically find the VLC instance running on your lan connected PC. This assumes no additional firewall is blocking the app on the PC.
I got it working pretty good using wifi inside my network, so I think VLC is setup properly.
What I'm trying to do is to stream through t-mobile 3G.
I did the port forwarding in my router, but couldn't get the app to connect my home PC via 3G.
I've been able to get it to connect via 3G here, though only HTTP audio streaming seems to work. RTSP video streaming seems to be broken via 3g, and again this appears to be an Android issue from what I'm reading.
vcxzfdsa said:
I got it working pretty good using wifi inside my network, so I think VLC is setup properly.
What I'm trying to do is to stream through t-mobile 3G.
I did the port forwarding in my router, but couldn't get the app to connect my home PC via 3G.
Click to expand...
Click to collapse
masterotaku said:
I've been able to get it to connect via 3G here, though only HTTP audio streaming seems to work. RTSP video streaming seems to be broken via 3g, and again this appears to be an Android issue from what I'm reading.
Click to expand...
Click to collapse
From the dev's site, found here
"Why does rtsp streaming not work over 3G?
Some operators don't allow rtsp on their network. Http streaming should work instead but for videos you can only stream the audio track."
If its true that t-mobile is blocking RTSP then that sucks. Im going to play with it tomorrow and see for myself.
If this doesnt work then Im back to square one. I really wanted to find a way to use the Twonky media server I already have setup and streaming. I have been streaming videos to friends and family for about half a year now. My Fios 30mb up 30mb down even allows me to stream 720p content over UPNP without so much as a hiccup.
First person that can manage to remove the wifi only option in AllShare gets access to my collection. . I have been trying to find it but im not really sure what im looking for in the code.
When in bed at night I use my SGS2 as a DLNA server by hooking it up to my TV via the MHL cable and then streaming video from my PC (which is in another room). It's a bit of a pain though to constantly get up out of bed to change the program. My wife also has a SGS2 and I was wondering if there was any way that her device could be used as a remote for my device? Is this possible? Any help appreciated.
This is possible. I hope the following explanation is sufficient.
Get PlugPlayer from the Android Market. Install it on at least the SGS2 connected to the TV.
PlugPlayer is a complete DLNA solution - it does all three functions: Media server, Media renderer, and Media controller. Skifta and Samsung's AllShare don't implement all functions IIRC.
Here's the breakdown of what this all means:
Media server is the source of your content.
Media renderer is the device with a display/speaker where the media is played.
Media controller controls what media is played from the Media server to the Media renderer.
One device can do all three at the same time.
Here's our setup:
SGS2 connected to TV acting as media renderer - let's call it DMR.
SGS2 in your hand acting as remote/controller - let's call it DMC.
Media source, wherever it is; it may be DMR, DMC, or another DLNA server - let's call this DMS.
Open PlugPlayer on DMR and leave it running. On DMC, in AllShare, Skifta or PlugPlayer, select the DMS that is hosting the media file you want to play, then select the DMR where you want to output the media file. Then, all that's left to do is to select the media file you want to play.
I do this all the time at home. I use a Buffalo NAS as the DMS, a Logitech Revue running PlugPlayer as the DMR, and my SGS2 as the DMC.
I hope you don't get lost in the sea of acronyms.
TWiTCommander said:
This is possible. I hope the following explanation is sufficient.
Get PlugPlayer from the Android Market. Install it on at least the SGS2 connected to the TV.
PlugPlayer is a complete DLNA solution - it does all three functions: Media server, Media renderer, and Media controller. Skifta and Samsung's AllShare don't implement all functions IIRC.
Here's the breakdown of what this all means:
Media server is the source of your content.
Media renderer is the device with a display/speaker where the media is played.
Media controller controls what media is played from the Media server to the Media renderer.
One device can do all three at the same time.
Here's our setup:
SGS2 connected to TV acting as media renderer - let's call it DMR.
SGS2 in your hand acting as remote/controller - let's call it DMC.
Media source, wherever it is; it may be DMR, DMC, for another DLNA server - let's call this DMS.
Open PlugPlayer on DMR and leave it running. On DMC, in AllShare, Skifta or PlugPlayer, select the DMS that is hosting the media file you want to play, then select the DMR where you want to output the media file. Then, all that's left to do is to select the media file you want to play.
I do this all the time at home. I use a Buffalo NAS as the DMS, a Logitech Revue running PlugPlayer as the DMR, and my SGS2 as the DMC.
I hope you don't get lost in the sea of acronyms.
Click to expand...
Click to collapse
Even if I don't need it, and I don't have a mhl, neither a second s2, I understood everything, and it was really well explained. You deserve a thanks.
Envoyé depuis mon GT-I9100 avec Tapatalk
I need some DLNA player to my phone and maybe DLNA server to Windows.
- What I want from a DLNA player to my phone: gets subtitles from server, and play avi/mkv/mp4 files, with subtitles.
- What I want from a DLNA server to Windows: stream avi/mkv/mp4+subs without needing to encode.
If possible, a explanation about CIFS, can it be useful to share my stuff and play on the phone with subtitles?
[To DLNA server I'm using Samsung PC Share Manager 4.2, I won't upgrade to AllShare, it's worse. And I use PC Share Manager with my Samsung TV, and it's working good]
And yes, I've tested a lot of servers and players, and no luck. The closest I got was BubbleUPnP+PC Share Manager, but it was without subtitles.
Thank you.
Hello everyone,
I need some help with an issue I have while using Android on my Xperia U (Rooted, CM 9.1). I have a very big music collection on two different Windows 7 computers, consisted of mp3, mpc, flac, ape, alac files - in many cases with a CUE sheet (flac/ape + cue). Structure is always Artist/Album/(CDXX)/Files. I have a high-res folder.jpg within every separate folder. Using Foobar2000 to play everything while on the PC.
I am looking for a way to play my music on Android. At the moment, I am using ES File Explorer to connect to the LAN share, and then play the music with the integrated ES player. But - no album art, no cue sheet support etc. I also use BubbleUPnP to stream video/audio from Universal Media Server installed on both computers. But I would like to use plain network sharing if possible, not DLNA.
I see that PowerAMP for example has all the file support I need, but I am not sure if it can read network shares. Is this possible? I also installed andLess as a player with lossless and cue support, but only for local files.
I am opened to any solution that will allow me to play my music with the format support same or similar to what Foobar2000 offers on Windows.
Please provide your insights/solutions to this problem.
Thank you and all best.