Hi,
I'm going to keep it as short as I can, just bought a vibrant and rooted in a nice way, then I tried to use odin to update from 2.1 to 2.2, it did it but then the screen goes black and it doesn't shows anything and when i say anything I really mean it, no battery when I plug it, and no brick message. Then I discovered that I used the wrong image to try and update it the one for the i9000
note:
i tried to put it on download mode, but as i said before it doesn't do anything is literally dead it, i think I'm going out of options i got no idea what to do anymore, PLZ SOMEONE GIVE ME SOME HOPE!!!
Two options
1) Go to radio shack, spend a few bucks and build a custom USB jig that will get you into download mode. The thread is here somewhere in the forums, search for it.
2) http://forum.xda-developers.com/showthread.php?t=1277056
UnBrickable Mod is awesome! It's easier to upload download mode with a click then to hold buttons.
SamsungVibrant said:
Two options
1) Go to radio shack, spend a few bucks and build a custom USB jig that will get you into download mode. The thread is here somewhere in the forums, search for it.
2) http://forum.xda-developers.com/showthread.php?t=1277056
Click to expand...
Click to collapse
I did one myself, and tested on a friend captivate, but my vibrant still the same NOTHING!, i mean wtf! the only thing it could have is a software/firmware problem but it seems he completely died on me!! :/
I had a bad cable once and had a odin flash go wrong..
Started out with download mode, but with no luck connecting to pc via 2 diff computers (not realizing it was the cable at the time) I kept messing around with it, sometimes connecting, then Odin screwing up again and eventually got to your point...nothing whatsoever, DEAD
After a while...called TMO and ordered a replacement...but didn't give up, I kept on with cable to phone, then pc...vice versa...battery in/out..and eventually out of nowhere it came back on..no idea how..one thing I do remember is reading to use vol up+down, but for me there was some weird combo where I think i started with up+down, then let go of up(kept holding down, or just used vol down)..can't quite remember...but don't give up..again mine was dead dead dead...somehow she came back...keep trying different things no JIG...
EDIT: Take your micro sd out of the phone and sim card too...that much i do remember...
accordex said:
I had a bad cable once and had a odin flash go wrong..
Started out with download mode, but with no luck connecting to pc via 2 diff computers (not realizing it was the cable at the time) I kept messing around with it, sometimes connecting, then Odin screwing up again and eventually got to your point...nothing whatsoever, DEAD
After a while...called TMO and ordered a replacement...but didn't give up, I kept on with cable to phone, then pc...vice versa...battery in/out..and eventually out of nowhere it came back on..no idea how..one thing I do remember is reading to use vol up+down, but for me there was some weird combo where I think i started with up+down, then let go of up(kept holding down, or just used vol down)..can't quite remember...but don't give up..again mine was dead dead dead...somehow she came back...keep trying different things no JIG...
EDIT: Take your micro sd out of the phone and sim card too...that much i do remember...
Click to expand...
Click to collapse
thx for the ray of hope pal but I think i'll just sell ir or something anyway doesn't hurt to keep trying until it happens, i have seen mostly 2 kind of options on internet the buttons combo and the jig tried them both nothing seems to work, I just think i have no luck, i bought the cell and 48h later it was already dead.....anyways thx to the people who bothered to answer me
Options:
1.you can call TMO for replacement.
2. Let the technician open it maybe there's something wrong wid d digitizer
3.Have you heard about the JTAG? It can resurrect your phone!
Djhemz07 said:
Options:
1.you can call TMO for replacement.
2. Let the technician open it maybe there's something wrong wid d digitizer
3.Have you heard about the JTAG? It can resurrect your phone!
Click to expand...
Click to collapse
UnBrickable mod is way better than JTAG. You should check it out. JTAG works once. UnBrickable mod allows software based recovery always and works on a dead brick with no special tools once its applied.
There two videos on the portal now which mention it. I'd like to think people are using it.. after all, this mod doesn't just happen. It takes someone to put in the work to research it... ahem...
option 1
--------
1. remove the sim-card and the memory card
2. remove the battery
3. connect the USB cable to the computer and to the cellphone (still no battery).
4. press on both volume buttons (volume up+volume down)
5.while you press on the buttons enter the battery into the cellphone.
option 2
--------
1. connect the USB cable to the computer and to the cellphone
2. press on both volume buttons (volume up+volume down)
3. press and hold the power button
4. the screen will dim - keep pressing on the buttons (3 of them)
5. the screen will show up the cellphone-computer picture - keep pressing...
6. the screen will dimm again - keep pressing
7. the screen will show up with the vibrant logo
8. leave the buttons - now the cellphone should enter to download mode
AdamOutler said:
UnBrickable mod is way better than JTAG. You should check it out. JTAG works once. UnBrickable mod allows software based recovery always and works on a dead brick with no special tools once its applied.
There two videos on the portal now which mention it. I'd like to think people are using it.. after all, this mod doesn't just happen. It takes someone to put in the work to research it... ahem...
Click to expand...
Click to collapse
sounds interesting i'll try those method anyone mind sending me the links?? btw how am i supposed to connect my phone onto the PC if it doesn't start which means it doesn't get recognized???? and a friend told me that i ****ed the Boot load does it fix that too??
vicmelgen said:
sounds interesting i'll try those method anyone mind sending me the links?? btw how am i supposed to connect my phone onto the PC if it doesn't start which means it doesn't get recognized????
Click to expand...
Click to collapse
Just connect it to the pc even if it doesn't recognized
Sent from my GT-I9000 using XDA App
did you try this?
battery out...
battery in--> hold only vol UP and power? for a few seconds
Related
I've tried every possible combination ... literally tried everything and this quote from this thread http://forum.xda-developers.com/showthread.php?t=771247 just comfirmed it to me
METHOD 4: STUCK AT PHONE ! COMPUTER:
(and are not able to use vol+ vol- methods to access downloader/recovery)
CALL TMOBILE AND BEG FOR THEM TO REPLACE UR PHONE..
i cant believe its that easy to mess up your vibrant, my g1 never gave me a problem
did you try:
1. Phone starts OFF
2. Hold volume up + volume down buttons
3. Plug in USB cable
That is how I get into download mode. You don't ever hit the power button and you plug in the USB cable WHILE holding down the volume buttons.
El Cipitio said:
I've tried every possible combination ... literally tried everything and this quote from this thread http://forum.xda-developers.com/showthread.php?t=771247 just comfirmed it to me
METHOD 4: STUCK AT PHONE ! COMPUTER:
(and are not able to use vol+ vol- methods to access downloader/recovery)
CALL TMOBILE AND BEG FOR THEM TO REPLACE UR PHONE..
i cant believe its that easy to mess up your vibrant, my g1 never gave me a problem
Click to expand...
Click to collapse
El Cipitio!!!!!!!
[do you eat ashes?] j/k
anyway... I'm sure there's a fix.
I *think* there's a fix.
ndhr3d said:
did you try:
1. Phone starts OFF
2. Hold volume up + volume down buttons
3. Plug in USB cable
That is how I get into download mode. You don't ever hit the power button and you plug in the USB cable WHILE holding down the volume buttons.
Click to expand...
Click to collapse
This is the way, no power just volume up an volume down, or just volume down with the same method. Be sure you remove your sd and sim cards also.
Sent from my Vibrant running Bionix Final w/Jacs and Voodoo using XDA App
What has always worked for me is:
1. Power off the phone
2. Plug it in via USB
3. Wait for the green battery symbol to pop up
4. Hold vol. down and the power button until the Download screen pops up.
MrDragomir said:
What has always worked for me is:
1. Power off the phone
2. Plug it in via USB
3. Wait for the green battery symbol to pop up
4. Hold vol. down and the power button until the Download screen pops up.
Click to expand...
Click to collapse
I have a hardware locked phone and have been stuck at the phone to computer link screen (a rather nervous place to be, I might say). First you need to take the battery out (to turn the phone off). Then you plug in the USB with the battery out. Then you put the battery in. You need to get the battery charging indicator, and I can't remember if you need to unplug/replug USB for that or not. Then you hold down both volume buttons and the power button. The *second* time you see Vibrant (phone reboots twice) let go the power button. You should end up in download mode.
I have the same issue, and when i try to do this:
JJMT said:
I have a hardware locked phone and have been stuck at the phone to computer link screen (a rather nervous place to be, I might say). First you need to take the battery out (to turn the phone off). Then you plug in the USB with the battery out. Then you put the battery in. You need to get the battery charging indicator, and I can't remember if you need to unplug/replug USB for that or not. Then you hold down both volume buttons and the power button. The *second* time you see Vibrant (phone reboots twice) let go the power button. You should end up in download mode.
Click to expand...
Click to collapse
it resets back to the battery icon.
Basically, im in the exact same situation as El Cipitio. i tried EVERYTHING!!! no luck at all...
Can adb still see your phone? I'm guessing no, but if it can just use "adb reboot downlaod".
Then again.... you guys are aware that the "hardware locked" issue was fixed almost two months ago right? One of the members posted a thread with a zip and the JI6 update also fixed this. There fore if you didn't flash either you should call Tmo, but if you have, then you're just doing it wrong... GL either way.
ahbad said:
I have the same issue, and when i try to do this:
it resets back to the battery icon.
Basically, im in the exact same situation as El Cipitio. i tried EVERYTHING!!! no luck at all...
Click to expand...
Click to collapse
One other thing to try is to remove the sim and external sd card and try the instructions I posted again. Really, if you get the pc to phone connection icon, you can get it into download mode and use odin to flash.
Dont waste your time fellas with trying to get,into recovery/download mode. If its anything like my hardware locked vibrant there isn't a key combo that will work. Probably thinking that your doing something wrong,YOUR NOT.
Im using my vibrant on att so I didn't consider calling tmobile. I actually called samsung, and after 5min on the phone they agreed to repair/replace for free. They recieved my phone on saturday amd I got it back that following thursday.
Save yourself a headache and sending
Sent from my SGH-T959 using XDA App
Might be a fix????
intruda119 said:
Dont waste your time fellas with trying to get,into recovery/download mode. If its anything like my hardware locked vibrant there isn't a key combo that will work. Probably thinking that your doing something wrong,YOUR NOT.
Im using my vibrant on att so I didn't consider calling tmobile. I actually called samsung, and after 5min on the phone they agreed to repair/replace for free. They recieved my phone on saturday amd I got it back that following thursday.
Save yourself a headache and sending
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Some one posted this in another thread. My brick got sent back before I could try this.
http://forum.xda-developers.com/showthread.php?p=8822843
This is how I got it to work....
1. Take out the battery
2. Plug the USB into the phone
3. Plug USB into the PC
4. Hold down the Volume up/down + Power button with one hand
5. Put the battery back in with the other hand
6. Wait for the phone2pc icon to flash 2 times and on the second time when the screen goes black release only the POWER BUTTON
7. When you see the digging Android you can let go of the Volume buttons
That is the only way I could get it to work
No, I can't get it into adb mode. The phone bootup screen comes (vibrant, the pink tmobile thing, then galaxy s), but then it goes black. The computer doesn't find anything during this time.
I don't really have time to do the soldering, so i'll try calling samsung. Problem is i live in toronto and bought this thing for cash, so i have no clue what to tell samsung lol. If that doesnt work, i guess soldering it is...
Try this:
unplug, remove battery, remove sim/sd cards
hold down volume control buttons
plug into wall adapter (usb charger - not to computer but to outlet)
pop battery in
Took me a couple tries, but I got my Vibrant into dl mode from nothing but a black screen (I could not register charging, or "phone ! pc" error)
intruda119 said:
Dont waste your time fellas with trying to get,into recovery/download mode. If its anything like my hardware locked vibrant there isn't a key combo that will work. Probably thinking that your doing something wrong,YOUR NOT.
Im using my vibrant on att so I didn't consider calling tmobile. I actually called samsung, and after 5min on the phone they agreed to repair/replace for free. They recieved my phone on saturday amd I got it back that following thursday.
Save yourself a headache and sending
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I'm am referencing more to the fact that these phones are not "hardware" locked. Hardware would refer to the volume & power keys not working... When your phone is on they work right?
Like stated before, IF, your phone is "hardware locked" look to either use the script or flash JI6. This way you re-gain functionality of the recovery & dl mode before flashing anything!
Ditto.. i got mine back after flashing without removing the lag fix.. never again... i will wait for froyo.. if that ever happens...
May I ask what bricked you?
nomadrider123 said:
Some one posted this in another thread. My brick got sent back before I could try this.
http://forum.xda-developers.com/showthread.php?p=8822843
Click to expand...
Click to collapse
The brick, in atleast my case, was from untimely removal of the phone from USB during Download mode of flashing stock kernal via Odin. This method described in the link above worked for me in getting the phone to boot into download mode without the use of the hardware keys (aka hardware locked phones). I also contacted Samsung directly through their Galaxy tech line, and they said I could send it in for free with their shipping label and if they couldn't flash back I could get a replacement, but there was a about a 2 week window I would be looking at without a phone, so I tried the homemade download-boot circuit and it worked perfectly.
THIS IS YOUR FIX!!!
I just did this the other day. If you are still stuck with the phone/!/computer screen do the following:
1.Hold the volume up/down + power button simultaneously
2.The screen will go black / reappear/ then go black again...when this happens, release the power button and continue holding the volume up/down button
3.Welcome back to download mode!
Please Mods, please lock this thread
Please stop waisting everyones time with stupid instructions.
When a phone is "hardware locked" (that is, bad flash/missing the sbin file.....)
YOU CANNOT GET INTO DOWNLOAD MODE OR RECOVERY WITH ANY KEY COMBINATION.
Stop waisting your time trying anything cause its not going to work. And thats a Fact.
Final fix and summary to this thread,
Either call T-mobile or Samsung.
Finish.
I tried to upgrade to froyo using the odin method from this thread http://forum.xda-developers.com/showthread.php?t=853950. After everything was successfully done my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
First, Get the Shipping rom (pit and tar files) so you can ODIN back to stock
Be sure you have the newest version of ODIN
Then remove the battery, plug the USB to the PC.
Now put the battery back.
Press both vol keys (up and down) and hold.
That should get you in Download Mode.
If it does not work, take battery out, unmplug USB.
Put battery back and try again to go into download mode.
Now you put the wrong version of froyo, if your keys maps are changed you may be screwed
If so, good luck! You are gonna need a lot of research to see if you can save it
i think i'm screwed.....nothing is working
If anyone else could help me with this, it would be great. I'm in between a rock and a wall right now with my phone.
you flashed the wrong rom. You didn't know that, did you?
iynfynity said:
you flashed the wrong rom. You didn't know that, did you?
Click to expand...
Click to collapse
No I didn't know that sadly. Is there anyway I can save my phone?
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
jmcghee1973 said:
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
Click to expand...
Click to collapse
Well right now I'm simply trying to get the phone to turn on which it won't, I was not asking for help to odin or recover. I was trying to ask if anyone else had this problem and if my phone is totally killed or if there's a possibility that i can save it. But thanks for your 2 cents.
Me too
I had ordered Samsung Vibrant Unlocked from T-Mobile USA around a month back. I am well past the 30 day replacement now.
I Rooted it updated to Axura 2.2.5.9
After all the procedure got completed, I rebooted the phone and now it just won't start at all.
My piece is Hardware Locked wherein I can't get into the Recovery Mode, but can get into the Download Mode. But I am not even able to get into the Download mode now.
It just won't freaking turn on.
If I send it over for repair, as the phone is a rooted one, will I void the warranty ?
Please reply quickly. I am starting to freak out.
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
lol you must be very happy after that, good to great that.
Sent from my SGH-T959 using XDA App
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Different Situation
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
IClassStriker said:
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
Click to expand...
Click to collapse
If your phone powers on at all, you should be able to get into DL mode. Follow the instructions on how to revert to stock via ODIN.
In reply to the OP, if you tried the download mode method:
connect phone to usb
pull out battery
hold both volume sticks
put in batttery
and the phone still does not turn on even after multiple tries , well you're a bit screwed. But, Samsung cannot detect if the phone has been rooted if it cannot even turn on. Just tell them the Kies Mini update bricked the phone.
omg leave ur phone on charger for 10 min, pull battery out when hooked up to charger put battery back in , let sit for few min pull battery out hook up phone to computer hold vol up vol down pop battery in , helped ? np this has been answered gazilion times in other threads
btw it takes few try this way to get it back up running so dont stop on first , hey .
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
Sent from Bionix V powered Vibrant
my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
yes u do that it makes sense lol
gmoney007 said:
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Click to expand...
Click to collapse
You're talking about a DIY Jig. A JTAG is completely different. They cost $150-300. You can pay to have a local repair shop jtag it for around $50 or send it to Samsung to repair/replace. I'm still trying to find out how much Samsung would charge for the repair if it's deemed out of warranty.
If your phone refuses to turn on no matter what you do and it gets warm or hot if you leave the battery in it, read on:
I hope my suggestion is not too late. I was in the situation before. I tried everything everyone said here and somewhere else. None of them works.
The reason that those methods don't work because you cannot get to download or recovery mode or even the pc-phone screen since your phone won't turn on. The reason that your phone doesn't turn on because the bootloader has been messed up. A jig will work only if your phone can be turned on somehow.
Three possible solutions:
1. Repair or replace it with T-mobile, or
2. Get someone to repair it with a riff box or other similar tool, or
3. Get the box and fix it yourself (not recommended if you are not familiar with electronic stuff.)
This is the link for the same problem you have; this guy bought the box and has his phone fixed himself. If you live in US, he may do it for you if you have no place to go. It does hurt to ask.
http://forum.xda-developers.com/showthread.php?t=974862&page=6
Hi all, i am running the latest version of Bionix i went to hit the reboot option and accidentally selected the download mode button. I pulled the battery out before it fully shutdown, me being impatient. When i put the battery back in the phone immodestly turned on and tried to boot, and stays on the vibrant screen for about 2-3 seconds then shuts off and try's to boot back up again on its own. Also when plugged in it continues to boot loop, it never shows that it is charging, only the battery with the loading circle, then ****s off and repeats.
I am not new to modding, and i am not new to getting my phone into recovery or download mode. The problem is the phone does not respond to the hardware keys, and i am positive that it used to be able to reach download mode via keys, i do not have a hardware locked vibrant.
I guess my question lies in the realm of another way to reset the phone, maybe via shorting pins or something? Does anyone know of an alternate method that does not rely on keys or software to reset the phone?
Thanks in advanced!
A jig
Sent from my SGH-T959 using XDA App
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
You might have to have odin up and running before you do the battery pull
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Good point !!!
daddysays said:
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
Click to expand...
Click to collapse
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
duboi97 said:
A jig
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Please explain.
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
almyz125 said:
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
Click to expand...
Click to collapse
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
dougstoner said:
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
Click to expand...
Click to collapse
Thanks for the info, i may look into getting/making a jig. I would be nice to have around.
daddysays said:
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Click to expand...
Click to collapse
Thanks again.
LovellKid said:
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
Click to expand...
Click to collapse
I've tried that method, it used to work for me. This soft brick is different than any other I've encountered. The phone has never automatically tried to boot when i put the battery into it, it makes things harder. But thanks and ill give it ago again.
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
almyz125 said:
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
Click to expand...
Click to collapse
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Also try different combos of being plugged in and not. And recovery or download mode. Recovery will be just as useful as dl mode.
Sent from my SGH-T959 using XDA App
daddysays said:
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
A jig is THIS, it shorts out pins in the micro usb port forcing it to download mode. I am positive i have the correct drivers and the sdk installed right. This isn't the first time I've been soft bricked and i am very familiar with DL mode and Recovery, and how to reach them traditionally. This soft brick is different though for what ever reason. I am going to have to try this jig, and if that doesn't work, i think ill have to read up about the jtag pins on it, if anyone has more information on jtaging a Galaxy S please post!
Did you ever end up trying the jig? I'm having the exact same problem you were. Thanks
I hard bricked a vibrant by trying to flash a rom on a low battery. Battery died in the middle of rebooting thus killing my vibrant with no way of recovery (seriously, charged the battery and the phone still wouldn't turn on... at all). Anyway, while trying to fix it, I actually made a jig. It's a lot easier than it sounds. You basically cut the plug that goes into your phone off of the cord down to where you can see all of the wires. Once you do that you break off the plastic shell that covers the plug. You then use a 301k resistor (I couldn't find that exact one so I bought 3 x 100k resistors and a 1k resistor then twisted them together).. plug the usb side into your phone then touch the opposing ends of the resistor onto wires 4 and 5 and it should go into download mode. You don't necessarily have to solder the resistor to the wires but you can. It makes it a bit easier considering you can't touch the wire part of the resistor or the static will mess up the voltage. Otherwise, Amazon sells jigs for a few bucks.
I wanted to post the url for the site that I found useful in making a jig but because I'm a "junior user" I can't. So if you search for "usb jig" on amazon there are a few; if you want to make one google "how to unbrick samsung vibrant" there is an article on factoidz called "How to unbrick your samsung vibrant/galaxy s" which I found to be the most useful.
Hope this helps!
I bought a jig off ebay and it worked like a charm! Worth its weight in gold! I now have a working phone again after being phoneless for 5 days.
Failed to replace stock recovery now get only there.
Hi, similar situation please help.
From stock 2.1 I rooted with King root Chinese zip then to go for a new ROM I renamed a cwm zip in update.zip and I read replacing stock recovery..... and saw this cwm just a couples of times, as it revert to stock recovery and doesn't switch on anymore, show grey battery logo fixed when charging, and now after removing the battery for long it goes in stock recovery se2 , cleaned cache and data but nothing change.
Is there please a solution without PC?
Thanks
So I had gone to Odin back to stock and made the mistake of putting the .tar in the "phone" section instead of the "PDA" Section and now it will not turn on. Ummmm I would appreciate any solutions. I'm thinking I may take it to a T-Mobile corporate store and see if I can sell them on replacing it.
Thanks
email one of the devs on this, sounds like you will need some advice from one of them
Email Whitehawkx or jellette they might be able to help or go to edt website and ask there
Thanks I went ahead and sent off a pm to see if I can get some help!
No life at all? USB plugged in and nothing still?........
http://www.youtube.com/watch?v=lzh7cbND-lo
Good luck!
You might need to try the jig method to kick off dl mode, but hopefully the bootloaders aren't jacked, and the following might work. If not, try the jig.
-Remove sim and sd cards
-Put the battery back in
-Hold down the volume rocker, both up and down.
-Plug in your phone, usb to pc, it must be to your computer, wall charger won't kick off dl mode
It should launch download mode so you can flash Odin with your files in the correct blocks.
If it doesn't work the first time, pull battery, and try it again. Sometimes it takes a few to get the buttons held down properly. Do not let yourself get frustrated, if you do, walk away for a minute. If that just isn't going to work at all, I do know there is a user on the EDT site selling nice looking jigs he makes, and they are very inexpensive. That might be your last hope to trigger dl mode and reflash if all else fails.
Br1cK'd said:
You might need to try the jig method to kick off dl mode, but hopefully the bootloaders aren't jacked, and the following might work. If not, try the jig.
-Remove sim and sd cards
-Put the battery back in
-Hold down the volume rocker, both up and down.
-Plug in your phone, usb to pc, it must be to your computer, wall charger won't kick off dl mode
It should launch download mode so you can flash Odin with your files in the correct blocks.
If it doesn't work the first time, pull battery, and try it again. Sometimes it takes a few to get the buttons held down properly. Do not let yourself get frustrated, if you do, walk away for a minute. If that just isn't going to work at all, I do know there is a user on the EDT site selling nice looking jigs he makes, and they are very inexpensive. That might be your last hope to trigger dl mode and reflash if all else fails.
Click to expand...
Click to collapse
Oh my gosh this actually worked, so the thing I was clearly doing wrong was holding the power button as well when I plugged it in then? Whatever it was thank you so much
I think everyone needs a JIG. Its soo hit or miss for people to push multiple buttons cuz we're all human. A USB JIG takes out the human element. Plus if you purchase one from EDT or TW ur supporting someone from those/these threads which is also a good thing. Glad you got it werking! thanx to @Br1cK'd
I've heard of a "Magic Dragon hack" that includes multiple button pushes/holds
ababypanda said:
Oh my gosh this actually worked, so the thing I was clearly doing wrong was holding the power button as well when I plugged it in then? Whatever it was thank you so much
Click to expand...
Click to collapse
Great news! Yep, dl mode is the volume rocker only. Its so easy, we just all panic that first time. I've been there. Believe me that was a sleepless night with brand new Vibrant that wouldn't boot.
Happy Flashing!
Huh Thats interesting and good to know if I ever run into that..... I always hold all 3 (Volume up + down + power) just like to get into recovery. Only with it plugged into PC I get DL mode and not plugged into PC I get recovery. Thats odd, I guess its just different phones
I'm not tech saavy - I'll try to remember what all I did as best I can.
I rooted my s3 a few months ago based on some detailed instructions found online - no issues. The method used involved clockwork mod or some such.
Fastforward to today - I was following these
http://www.androidpolice.com/2010/0...d-phone-with-rom-manager-full-backup-restore/
instructions to attempt to install liquidsmooth (http://forum.xda-developers.com/showthread.php?t=2108013) rom. Prior to doing anything, I had backed up everything on titanium backup and using the back up in rom manager. In step 3.1, "flash a recovery image," I didn't think I needed to do this, as I thought it was a part of rom manager.
At any rate, I proceeded onward, and after the phone finished making a back up, immediately after it started to install the new rom, the screen went black (I assume the phone turned off).
I'm currently unable to get it to turn on at all, taking the battery out didn't do anything, and when I plug it into the comp via USB, it doesn't seem to recognize the device.
So I'm quite sure I'm bricked.... But if anyone could provide any advice (or confirm I'm bricked), I'd very much appreciate it. I'm a broke med student on loans, and a new phone is going to hurt the bank account a lot
Thank you in advance
P.S. It's 3:40 am here now.. I need to get to sleep, but I'll check on the thread first thing tomorrow
Sorry to say...
I am sorry to say but if your phone does not turn on at all or does not get in to recovery , It is hard bricked and there is nothing you can do about it.. try getting into download mode. If you can then something can be done. if not then......
To get into download mode simultaneously press the volume down key , home key and power button. Tell me if the download mode screen comes..
When the phone is plugged into the computer via USB and I hold the power button (or any other reset combo of buttons), the computer makes the sound like it realizes I detached the device, but then it makes a triple short 'bum bum bum' when the power comes back on (all of this with no apparent changes from the phone)
If it's helpful, a friend realized I downloaded an international ROM on an ATT phone
njbartel said:
When the phone is plugged into the computer via USB and I hold the power button (or any other reset combo of buttons), the computer makes the sound like it realizes I detached the device, but then it makes a triple short 'bum bum bum' when the power comes back on (all of this with no apparent changes from the phone)
If it's helpful, a friend realized I downloaded an international ROM on an ATT phone
Click to expand...
Click to collapse
the "bum bum bum" noise is the usb device malfunction error so chances are is that its definately hard bricked. there not really anything else you can do at this point.
Sent from my U8160 using xda premium
Sending it in for JTAG. Thank you all for the help
njbartel said:
When the phone is plugged into the computer via USB and I hold the power button (or any other reset combo of buttons), the computer makes the sound like it realizes I detached the device, but then it makes a triple short 'bum bum bum' when the power comes back on (all of this with no apparent changes from the phone)
If it's helpful, a friend realized I downloaded an international ROM on an ATT phone
Click to expand...
Click to collapse
I think its hard bricked .... Just to make sure without plugging the usb , try to get into download mode... (simultaneously press the volume down key , home key and power button) if you can then your fone can be saved otherwise... try it and inform us if your phone got into download mode or not..
njbartel said:
Sending it in for JTAG. Thank you all for the help
Click to expand...
Click to collapse
Try get into download mode before you send it off. Hold volume down +power + home button. Do it without a USB cable inserted.
Sent from my GT-I9000 using xda premium
Thank you both for the replies, my apologies for just noticing them and responding. My phone was definitely hard bricked (no combination of button pushing with or without the USB in would get the screen to change off black).
I sent the phone here
(I tried to do a URL, but my post count prohibits it. If you google search "brickedmyphone", it's the 1st hit)
for JTAG, and I feel the need to give the guy running it a plug. Very prompt replies prior to placing the order, and updates given throughout. The same day he received the phone, it was fixed and mailed back out. Total turnaround time, including shipping, was 5 days (received it today, phone was packaged securely and in perfect /working/ condition). Just need to reactivate the sim tomorrow (activated an old iphone with another sim on my number).
Thank you all again for the help!