Ok I got a unlock code. I put a non 3 three sim into my mobile, but its not requesting me to enter anything. Am on the Grifs_07 rom.
OK fixed! For future reference : I had to install orginal stock 2.3.3 firmware, then the code input thingy showed up.
Related
i got cr96 6.5 rom installed and i ran lokiwiz03a and got the sim unlock code . ok so i put my tmobile sim in and it never asks for the unlock code it just acts like its constantly searching for network . what do i need to do ? i was gonna flash back to stock rom but idk where to find it and im scared of bricking the g4
Mine is doing the same. Anyone know the solution?
Ok, I figured it out. I had cid unlocked and then upgraded to cr96. So I ended up flashing the rom to the official windows mobile rom and then running lokiwiz. Lokiwiz provided the sim unlock code and then I entered it into the phone while still running the official rom. I then flashed the cr96 and everything was unlocked. So basically:
1 flash original windows mobile rom
2 run lokiwiz and click sim unlock
3 write down the number it gives you
4 turn phone on with a non official sim in it
5 the phone will tell you the phone is locked and give you a place where you can enter the code that lokiwiz came up with
6 enter the code
7 flash to whatever rom you want
the above assumes you are already cid unlocked
Hello, I have a Mexico Telcel Galaxy Ace 5830L phone that I need to unlock. I purchased a code from cellunlockers.net to later find out that my phone is hardlocked (shows padlock with "dismiss" key under it). What can I do to fix this? I am looking to use it with simple mobile or t-mobile here in the US
Perhaps try boot the phone into firmware mode and wipe cache / factory reset?
Tutorials can be found here http://forum.xda-developers.com/showthread.php?t=1034145
I've tried this but still the same problem. Im trying to flash the latest firmware for this phone and see what happens, will look into rooting after the firmware update.
can someone help me out with what firmware to use?
here is my current device firmware:
PDA: S5830LUBKA2 [R5]
PHONE : S5830LUMKA1
CSC : S5830LTCEKA1
by the way, the current firmware is Telcel Mexico Froyo
Have you tried my bml5 unlock method?
Cheers
tweakradje said:
Have you tried my bml5 unlock method?
Cheers
Click to expand...
Click to collapse
I have not, I will look it up hope it helps
tweakradje said:
Have you tried my bml5 unlock method?
Cheers
Click to expand...
Click to collapse
It seems like the bml5 is a method to get the unlock code, I already have the code what I don't have is the option to insert it to the phone when I enter a invalid sim
Update: I updated the firmware to GB 2.3 with Samsung KIES, I tried again the unlock instruction codes that cellunlockers.net (with original SIM) and this time it gave me a MMI problem, but still no screen to enter unlock code.
I entered a menu with *#*#4636#*#* now trying to see if I can get something working
I have been experimenting with different ROM's. I boot up the phone with SImple Mobile SIM and I get the window to Unlock the phone, I enter the code and it says Carrier unlock successful, but I still cannot call out..
I checked mcc options also set them to 31026(T-mobile) and entered network unlock code again successfully but still did not work. With some ROMS it does not accept the code, can someone give me some advice?
I have a factory locked S3, but my provider gives out the unlocking code for free. I put in a sim from another provider, got asked for the code, entered it and it worked.
I then rooted the phone.
However, after a few days I wanted to remove root and reflashed stock firmware with Odin. I searched out the proper file here at xda and flashed it. I then got an error about messaging stopped everytime I booted and searched some more. The solution was to flash with Odin again, but check upgrade bootloader. After that the phone works fine and everything is in place like it was new.
But, my phone has been locked again and my code does not work anymore. I have called my provider (leaving out the root and flashingpart) and they say that if the unlock is not working I must send it to them so they can unlock it.
So I have these questions:
1. Having done what I have done, will TriangleAway + reflashing stock with Odin remove every trace of my "tampering"?
2. What can they do to the phone that I cannot do myself with som advice from xda?
3. How many attempts are there of entering the unlock code? It still asks for a code. I do not get any message about too many tries. But I have must have punched the code more than three times...
I have read that people get their IMEI changed when reflashing, but mine is still original. I can not understand why the operator lock has come back.
Please help!
1) I believe so yes (not sure, I'm new to this forum just what I've read)
2) They can block the IMEI if the phone was lost/stolen
3) I am not sure with Samsung/Android phones but when I was unlocking my mums Nokia C3 it only allowed me to enter a code three times before displaying an error message.
It is not stolen or lost. I have bought it from my operator myself. I talked to them today and there is no block on this phone. It does work with my operators sim, but no other sims.
My question was that they can do to unlock ut that I cannot do myself?
jadajada said:
It is not stolen or lost. I have bought it from my operator myself. I talked to them today and there is no block on this phone. It does work with my operators sim, but no other sims.
My question was that they can do to unlock ut that I cannot do myself?
Click to expand...
Click to collapse
Everything, they are your carrier.
None of us can generate unlock codes for the phone, they can get the unlock codes and make sure it's 100% unlocked
UrbanDesigns said:
Everything, they are your carrier.
None of us can generate unlock codes for the phone, they can get the unlock codes and make sure it's 100% unlocked
Click to expand...
Click to collapse
What about the Voodoo sim unlock app ? You'll need root access though. the app has also been removed from the Play Store
The dev's site, you can download and sideload the app from here:
http://project-voodoo.org/android-apps
TheLegendaryJay said:
What about the Voodoo sim unlock app ? You'll need root access though. the app has also been removed from the Play Store
The dev's site, you can download and sideload the app from here:
http://project-voodoo.org/android-apps
Click to expand...
Click to collapse
That's not an unlock code though it's just temporary. A factory unlock is permanent (or so it should be)
UrbanDesigns said:
Everything, they are your carrier.
None of us can generate unlock codes for the phone, they can get the unlock codes and make sure it's 100% unlocked
Click to expand...
Click to collapse
I spoke to my carrier and they said that there was only one valid code for my IMEI, and that does not work anymore. It did work once, but after reflashing the firmware with Odin, the lock came back and now the code does not work.
Perhaps they just replace the phone with a swap unit? Therefore I ask again, will TriangleAway and reflashing stock remove all traces of rooting/tampering? If not I will get the phone back and be forced to pay for the service as well.
+1 for this problem.
I unlocked mine with the voodoo unlocker and was fine for a couple of months. Flashed a newer version of cm10 and was asked to enter Sim unlock code. This time I got the pin from my carrier but with that number it says Sim unlock unsuccessful.
Anyone else had this problem? Anyone know of a solution?
At the moment I just have a fancy mp3 player/camera :silly:
Voodoo sim doesn't work properly with then latest firmwarea but theres a new app 'Galaxsim-unlock' that I can recommend. Your'llshare find it over in the themes and apps section
jadajada said:
I have a factory locked S3, but my provider gives out the unlocking code for free. I put in a sim from another provider, got asked for the code, entered it and it worked.
I then rooted the phone.
However, after a few days I wanted to remove root and reflashed stock firmware with Odin. I searched out the proper file here at xda and flashed it. I then got an error about messaging stopped everytime I booted and searched some more. The solution was to flash with Odin again, but check upgrade bootloader. After that the phone works fine and everything is in place like it was new.
But, my phone has been locked again and my code does not work anymore. I have called my provider (leaving out the root and flashingpart) and they say that if the unlock is not working I must send it to them so they can unlock it.
So I have these questions:
1. Having done what I have done, will TriangleAway + reflashing stock with Odin remove every trace of my "tampering"?
2. What can they do to the phone that I cannot do myself with som advice from xda?
3. How many attempts are there of entering the unlock code? It still asks for a code. I do not get any message about too many tries. But I have must have punched the code more than three times...
I have read that people get their IMEI changed when reflashing, but mine is still original. I can not understand why the operator lock has come back.
Please help!
Click to expand...
Click to collapse
You can try to use Valhalla ( Voodoo has disappeared from the Play Store ) :
http://donmacsblog.blogspot.co.uk/2012_06_01_archive.html?m=1
I've managed to get mine back to unlocked.
I was on cm10 and then when flashing a newer version the lock came back. I was originally using voodoo sim unlock but that wouldnt work this time so rang my carrier and got an official code which would not work either.
Flashed back to stock using odin making sure to use the network branded ROM i was originally on and not just a stock ROM, then enter the code the carrier gave me and this time it worked!
Guessing you must be running a stock carrier branded ROM for the code to register properly and unlock.
Hope this works for anyone else!
Hello
I purchased a brand new Samsung Galaxy Alpha Direct from Vodafone UK. My sim is under Orange/EE.
I purchased a NUC code from an unlocking vendor online. I entered the correct IMEI number as requested and received the code a few days later. I entered the code and received a message saying "Network request unlock unsuccessful."
Went through troubleshooting with the vendor and could not get it working. A refund was given.
I decided to Vodafone UK to have the phone unlocked direct through them as I thought maybe a dodgy code was given. I received my code yesterday, followed the instructions and again the same message appears.
I was growing tired with this so decided to take it to an independent experienced phone unlocker/repairer and explained the situation to him. I give him the code and he tried various different things and was baffled as this should be an easy process.
The phone is running android 4.4.4
Any help would be greatly appreciated as I have a phone here I cannot use :crying:
Thanks in advance!
dear same thing happened to me I post a thread on this then I get no answer , but u can use this website to unlock your phone be sure will be unlocked but try to fill information that where you already purchased your phone not where you want to use OK ?
www.unlockunit.com
wish that will help you
I just unlocked note 4 from Vodafone. I got 4 unlock codes. One is for sim and the other 3 for aomesthing more deeper in the sistem Just worked with the sim unlock code. My question for you is: if you tryed 2 different ( online and Vodafone) YOU SHOULD GOT THE SAME CODE FOR SIM UNLOCK because is strictly related to your IMEI. Is that the case?
P.S. 1.On Google play is a program Note 4 unlock. I got my unlock code in 50 minutes in the day of international launch of note 4. You should try that.
2. Write with Odin a stock firmware and try again your unlock code after that
3. To enter your unlock code you have to insert an non accepted sim in your phone, power up your phone and enter the code when you are asked. Did you do that?
Try this
Arteta said:
Hello
I purchased a brand new Samsung Galaxy Alpha Direct from Vodafone UK. My sim is under Orange/EE.
I purchased a NUC code from an unlocking vendor online. I entered the correct IMEI number as requested and received the code a few days later. I entered the code and received a message saying "Network request unlock unsuccessful."
Went through troubleshooting with the vendor and could not get it working. A refund was given.
I decided to Vodafone UK to have the phone unlocked direct through them as I thought maybe a dodgy code was given. I received my code yesterday, followed the instructions and again the same message appears.
I was growing tired with this so decided to take it to an independent experienced phone unlocker/repairer and explained the situation to him. I give him the code and he tried various different things and was baffled as this should be an easy process.
The phone is running android 4.4.4
Any help would be greatly appreciated as I have a phone here I cannot use :crying:
Thanks in advance!
Click to expand...
Click to collapse
If your phone does not ask for the unlock code:
1. Turn on the phone with original Sim card or without Sim card
2. Enter #7465625*638*NCK/Network#
The phone is now unlocked.
If your phone does not ask for the unlock code:
1. Turn on the phone with a foreign (Unaccepted) Sim card
2. Then enter the following sequence:
#0199*Unfreeze/Defreeze#
#0111*NCK/Network#
#0121*SCK/Subprovider#
#0133*SPCK/Provider#
The phone is now unlocked.
thekrisho said:
If your phone does not ask for the unlock code:
1. Turn on the phone with original Sim card or without Sim card
2. Enter #7465625*638*NCK/Network#
The phone is now unlocked.
If your phone does not ask for the unlock code:
1. Turn on the phone with a foreign (Unaccepted) Sim card
2. Then enter the following sequence:
#0199*Unfreeze/Defreeze#
#0111*NCK/Network#
#0121*SCK/Subprovider#
#0133*SPCK/Provider#
The phone is now unlocked.
Click to expand...
Click to collapse
where to type this following codes?
freedom_john said:
where to type this following codes?
Click to expand...
Click to collapse
Yes where to enter these codes and letters? I tried entering the numbers and nothing happens, if I try to press call it says Mobile network not available.
So I installed a custom rom on my phone after unlocking BL and all that a while ago.
I recently got the unlock code from my service provider and was trying to sim unlock the L9. I get an error saying I have an invalid code (which it isn't). A quick google told me that custom roms sometimes won't let you use unlock codes.
I tried using the guide from @cmahendra to reset back to the original kdz/ROM for the phone but it stops at 15% and says phone not connected (even through all the drivers install/are installed correctly).
Does anyone know best way to unlock the phone with the unlock pin provided? Or at least how to reset it back to normal?