Related
Think there will be cool silicone covers and unique cases for the Touch HD similar to the iPhone? One thing about my Touch Pro and Tilt I have is they don't make silicone covers due to the slide out keyboard. On rare occasions I've dropped my Tilt on asphalt and scratched it bad.
Just want a good protector for a 1000 dollar phone when it comes out.
Would appreciate any info or rumors of accessories coming out..
Thanks
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
What about those invisible shields? They are transparent stickers essentially that cover the entire phone. I think it would be better to have that as it protects the phone from scratches and still leaves the cool uncased form factor. I saw one on my friend's iphone. Looked fine.
Seidio case for the HD?
I wonder if there will be a Seidio case for the Touch HD, as I'm very satisfied with the one I have for my TyTn II (it literally saved it's life)
tboy2000 said:
What about those invisible shields? They are transparent stickers essentially that cover the entire phone. I think it would be better to have that as it protects the phone from scratches and still leaves the cool uncased form factor. I saw one on my friend's iphone. Looked fine.
Click to expand...
Click to collapse
I will also buy an invisible shield for my HD when i have it, it's more beautiful than the silicone covers.
Temporary Silicone Solution
galaxys said:
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
Click to expand...
Click to collapse
Here is a temporary silicone solution I've been using. Be careful as its a snug fit.
http://www.target.com/Incase-Protec...49637?ie=UTF8&index=target&rh=k:incase&page=1
galaxys said:
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
Click to expand...
Click to collapse
I'm using a black Belkin silicone case meant for an iPhone 3G. I had to cut a hole for the camera and the headphones. It fits, but not too tight. I think it will hold me over until the official HD models hit the market.
It seems there is one sold here
http://bluetrade.eu/index.php?page=product&id=13413
but they are out of stock !!!
Matterhorn said:
I'm using a black Belkin silicone case meant for an iPhone 3G. I had to cut a hole for the camera and the headphones. It fits, but not too tight. I think it will hold me over until the official HD models hit the market.
Click to expand...
Click to collapse
Sounds Like a good idea any chance of some close up pics so we can see how good it fits?
We r in Luck!!!!!!!!!!
http://cgi.ebay.co.uk/Silicone-Case...14&_trkparms=72:1300|66:2|65:12|39:1|240:1318
Enjoy...........
http://cgi.ebay.co.uk/Crystal-Case-...300|66:2|65:12|39:1|240:1318#ebayphotohosting
Or a hard case?
cheap price...i ordered a silicone case until something better comes along.
yeah I also ordered silicone one, I think it protects the glossy frame well
HD Cases
Check here for cases, cheap prices and fast delivery (to Greece approximately 1 week from Hong Kong)
And now they do have silicone and crystal cases
We r in Luck!!!!!!!!!!
http://cgi.ebay.co.uk/Silicone-Case-...1|240:1318
Enjoy...........
Click to expand...
Click to collapse
What means? There are not especially covers for HD !!!!!!!
Found at NetTask.
Thanks to ktsak
dadeluna said:
What means? There are not especially covers for HD !!!!!!!
Found at NetTask.
Thanks to ktsak
Click to expand...
Click to collapse
It's http://www.netimes.com/shop/htc-dopod-touch-hd-t8282-blackstone-c-80_612.html
Enjoy !!!!!!!!!!
What do you think about the original silicon case from HTC (HTC Touch HD Silicon Case SC S420)?
https://www.htcaccessorystore.com/ee/p_htc_item.aspx?i=176956
You think it would fit together with the leather case I am getting from digitec.ch?
http://www.digitec.ch/ProdukteDetails2.aspx?Reiter=Bilder&Artikel=159942
Ascenca
looks nice, but not available until next year... i don't want to wait; i'd rather protect now with something cheaper an purchase HTC's version later.
My silicon arrived from ebay today. Package contains the case, a replacement screen protector (which I will not use - waiting for invisishield) and a useless neck strap (useless in that there is no strap loop on the case!).
The case itself fits easily, makes the Hd easier to hold in the hand, and makes me much less scared of dropping it.
Of course, now I have introduced a new surface into the equation, the propensity for scratches via this method increases. However, the fit is pretty good and I certainly prefer this to having the paintwork exposed all the time.
thedaddyy said:
http://cgi.ebay.co.uk/Silicone-Case...14&_trkparms=72:1300|66:2|65:12|39:1|240:1318
Enjoy...........
Click to expand...
Click to collapse
One of these came today. It is specifically for the THD. The fit is good the cut outs in the right place and the buttons sound and off operable through the rubber.
At £3.49 It will do for now.
Has anyone tried the new Rearth Slim cases? I am considering buying it. I can't post links because i don't have enough posts, but just search Rearth
http://www.rearthusa.com/Galaxy-S-2-ATT-Ringke-Slim-_p_279.html
there's the link for anyone else who wants to take a look.
I haven't tried this one so I can't help you but I figured i would post the link for you.
ive had it since mid october...it was the closest to incipio because they didnt have a case out yet...its all i need...slim..one rubber piece..easy on and off...does the job for me...id go for incipio though..theres comes with screen protectors
I've had the rearth case for about 2 months, I like it except when I got it it was slightly loose not enough for me to care but now its loosened to the point where the case is starting to cover the camera and if I push it up the mic and lower speakers are halfway covered
Sent from my SAMSUNG-SGH-I777
@nizda1:
Are you talking about the Ringke or the Ringke Slim? I have both. The Ringke is soft and pliable. I can see it loosening up. The Slim is quite rigid and snaps onto the corners of the phone. The top and bottom are covered, along with the corners, but the sides are exposed down to the controls. This is quite a slim case!
Yea I was, just checked out the slim looks nice, how do you like it?
Sent from my SAMSUNG-SGH-I777
Ooo, I kinda like this one! Can make our black units, pretty much white and it covers the whole back! But $25...
I've had it on since since day 1. Love it.
I like it better than anything I've tried to date. It's about the "least" amount of case that I've seen. About the only thing that I would change is that being glossy, the back is beginning to show some very minor scratching from being set down on hard surfaces. If Rearth offered it in a matte finish I'd be all over it.
Just bought that case in Noble Black. Will review it upon arrival.
i have used this case and the SGP Neo.
This case is excellent. It's as minimal as can be, fits well, and looks good.
Good case!
Good to hear fellas.
It'll be here tomorrow, according the tracking from the shipping. Anything I ever ordered that goes through the post service always arrives the day after it goes through this one center.
Is it a little sad that I'm mildly excited for this to come?
Guys just to let you know after three months of having this case with my Atrix it was stretching out also the texture came off the case kind of like a clear coat coming off on a car
Sent from my SAMSUNG-SGH-I777
This is a hard plastic case. Its not going to stretch.
Sent from my SAMSUNG-SGH-I777 using XDA App
33t said:
This is a hard plastic case. Its not going to stretch.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
your right i was think of there silicon one
Nice find!
Just a quick question to anyone who actually has the case -- does it cover the top mic next to the headphone jack, or is the cutout correct for our version?
pinoymutt said:
Nice find!
Just a quick question to anyone who actually has the case -- does it cover the top mic next to the headphone jack, or is the cutout correct for our version?
Click to expand...
Click to collapse
This, along with their newer silicone case for the i777 are supposed to have the correct placement for the noise cancelling microphone.
Just got mine in. It does have the mic cut out next to the headphone jack.
Just got mine. Overall I'm digging it. Case is thin and probably doesn't offer much in the way of protection buy that's the price to pay for looks. It being black shiny hard plastic I already see two scratches. Just got to make sure not have the case in the same pocket as my keys and ill be good.
I want to buy case for Nexus 6. I am in dilemma, which cover to buy.. Spigen one or Ringke?? ?? and which mnodel.. I want th cover to be transparent, sturdy and should show my Nexus. It should protect from scratches and drops.
anuragvivek93 said:
I want to buy case for Nexus 6. I am in dilemma, which cover to buy.. Spigen one or Ringke?? ?? and which mnodel.. I want th cover to be transparent, sturdy and should show my Nexus. It should protect from scratches and drops.
Click to expand...
Click to collapse
http://www.amazon.com/Nexus-Case-Pr...+6+Case+-+Ringke+SLIM+Case&pebp=1416943494337
If you're looking for a transparent case then look into Spigen Ultra Hybrid or Ringke Fusion.
Ringke Fusion is not shipping until next week though. I'm using the Ultra Hybrid, I like the colors and its a nice case. Although I think I'd like the buttons to be separated so it'd be easier to see which key is what.
I have decided on the spigen slim armor in gunmetal. Sadly I dont have my nexus 6 yet but the case looks and feels awesome. I just fear that the vertical stand will break after a while but thats just a guess...
Ringke by far is my favorite just because the buttons are made a little better then the spigen.
I have been quite happy with the spigen slim armor. Mine has none of the QC issues the Amazon reviews have mentioned. My kickstand has never fallen out and I don't know how it ever could with the phone in the case. I think most of the overly negative reviews on the kickstand were from people who reviewed it before they even had the phone. The phone fits perfectly and is easy to get out. The one issue I do have with it is the flat buttons. It is virtually impossible to know which button you are about to press without looking which is kind of annoying. If they modify that I will buy a new one. I'd be happy if the Slim Armor had the button of the neo hybrid.
I used one of those slim Ringke cases on my nexus 5 and it scratched the corners of my phone when I removed it so I'll never use that brand again. I know this phone is different so maybe that's no longer an issue but once is enough for me.
Edit - I see you said you want a transparent case. That means my comments can be disregarded, lol...
Alaris said:
Ringke by far is my favorite just because the buttons are made a little better then the spigen.
Click to expand...
Click to collapse
Agreed and the buttons on the N6 are separated which prevents miss taps, its still not available for sale yet though. Using the Ultra Hybrid for the time being. Not sure how I feel about the caps on the N6 ports for the Fusion, they didnt use to have them.
Ringke for cases definitely. I have both for the N5 and for the N4 and Ringke does feel slimmer and very well made.
Spigen for Screen Protectors.
I ordered the Ringke Fusion Crystal
Pics of Spigen Ultra Hybrid with Spigen Ultra Crystal Screen Protector
I'm sure by now you've already obtained your case, though I thought I'd post some pictures of the Spigen (Crystal Clear) Ultra Hybrid along with a Spigen Ultra Crystal Screen Protector.
As you can see, it shows off the device, but still achieves maximum protection. The Case is a hard shell on the back, and soft rubber along the sides. Both are clear.
I haven't had any issues with the buttons on the case. If anything, the button placement on the actual phone will take some getting used to, though they are situated halfway down for a reason.
Enjoy!
P.S. These pics were taken from my iPhone 5S. Unfortunately.....
how is he mic hole placement. i have been thinking about buying one of these. it just all the reviews don't talk about making calls with the case on. it almost looked like the case covered up some of the mics.
Sent from my T-Mobile Samsung Galaxy Note 10.1 2014
Ordered the Spigen neo-hybrid earlier today
http://www.amazon.com/Nexus-Case-Sp...8&qid=1417442016&sr=1-4&keywords=nexus+6+case
Anyone have this case? I like the minimal approach and lack of bulk. We'll see when I get it though
Uncle Irish said:
Ordered the Spigen neo-hybrid earlier today
http://www.amazon.com/Nexus-Case-Sp...8&qid=1417442016&sr=1-4&keywords=nexus+6+case
Anyone have this case? I like the minimal approach and lack of bulk. We'll see when I get it though
Click to expand...
Click to collapse
I am using this case right now and really enjoy it. No issues with QI, NFC and it offers great protection for the minimalistic design. Case is very sturdy and fits like a glove. The only small gripe I have with it is the buttons. While they are very tactile it is very difficult to distinguish power from volume. Other than that its great.
I did order the ringke fusion, which is the basically the same case. The biggest differences between the spigden and the ringke I saw were plugs where the cutouts are, it comes with a screen protector AND the power button and volume rocker are much more pronounced (easier to distinguish) in my opinion. Both cases are great and if your curious about the other, here's a link.
http://www.amazon.com/gp/product/B00O153MUK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Sent from my Nexus 6
Android1126 said:
I'm sure by now you've already obtained your case, though I thought I'd post some pictures of the Spigen (Crystal Clear) Ultra Hybrid along with a Spigen Ultra Crystal Screen Protector.
As you can see, it shows off the device, but still achieves maximum protection. The Case is a hard shell on the back, and soft rubber along the sides. Both are clear.
I haven't had any issues with the buttons on the case. If anything, the button placement on the actual phone will take some getting used to, though they are situated halfway down for a reason.
Enjoy!
P.S. These pics were taken from my iPhone 5S. Unfortunately.....
Click to expand...
Click to collapse
Are those button cutouts or are they flush with the case (built in buttons)
Prod1702 said:
how is he mic hole placement. i have been thinking about buying one of these. it just all the reviews don't talk about making calls with the case on. it almost looked like the case covered up some of the mics.
Sent from my T-Mobile Samsung Galaxy Note 10.1 2014
Click to expand...
Click to collapse
Mic hole placement is aligned perfectly. Nothing is covered, not sure if the picture shows that.
---------- Post added at 10:46 PM ---------- Previous post was at 10:43 PM ----------
Pilz said:
Are those button cutouts or are they flush with the case (built in buttons)
Click to expand...
Click to collapse
They are flush, and built into the soft rubber material. I know many people are having issues with the button placement, but it hasn't been a problem for me. It's quite simple really, top is power, bottom is volume down, that leaves the middle for.... You guessed it! Haha
Prod1702 said:
how is he mic hole placement. i have been thinking about buying one of these. it just all the reviews don't talk about making calls with the case on. it almost looked like the case covered up some of the mics.
Click to expand...
Click to collapse
Android1126 said:
Mic hole placement is aligned perfectly. Nothing is covered, not sure if the picture shows that.
Click to expand...
Click to collapse
Cut out is practically perfect, yes. See attached or full gallery here.
Android1126 said:
P.S. These pics were taken from my iPhone 5S. Unfortunately.....
Click to expand...
Click to collapse
That's ok, we still welcome you
Andromjb said:
Cut out is practically perfect, yes. See attached or full gallery here.
Click to expand...
Click to collapse
That looks like a very well made case.
jj14 said:
That's ok, we still welcome you
Click to expand...
Click to collapse
Haha, thanks. I've been an Android user since the G1. The iPhone is for work. FIgured since ALLLL of my personal devices have been Android, might as well try somethign different.
To be honest, I barely even touch my iPhone other than for responding to e-mails on the go, and emergency work calls. It was cool and interesting for about 2 days, though I will probably upgrade to the iPhone 6S plus when it becomes available (for work of course).
Spigen Perfect/Thin Fit VS Ringke SLIM
I have both the Spigen Perfect/Thin Fit and the Ringke SLIM cases in black. I started with the Spigen but didn't like the way the Motorola logo was the centerpiece of the back of the phone and also the case kept 'unclicking' out of position on the phone when it was in my pocket (so far in only 3 days this has happened around 5 times)... so I looked for an alternative and found the Ringke SLIM. I have to say I much prefer the Ringke, it's simple, it has very subtle branding (no cutcouts for motorola logo on the back either) and the cutouts for the inputs are nicer. It also has cut outs at the stress points that make it a bit more durable (less chance of the plastic breaking or the case stressing in general). Also, so far the Ringke has been rock solid and hasn't moved an inch on my Nexus 6. The only thing I miss from the Spigen is the soft touch black coating... but considering the other issues I had, this is perfectly acceptable.
I got the spigen neo hybrid, it's OK but makes the phone feel bulky and makes the screen bezel look huge. Also the buttons could be better designed, the nexus 6 has a smaller textured button and a longer volume button, spigen went for 3 buttons all the same size with no texture and in my coat pocket it's hard to get the right button to change volume when listening to music.
As the tile asks.
Was going for the Neo Hybrid, but saw on YouTube videos that it adds a significant amount of bulk to the phone, also in dimensions, and it's not that sturdy anyway!
So I need a lightweight case, which will protect the phone, should have a decent amount of lip at front to protect the screen, and the case itself should not be fragile. I find it meaningless when a case requires not to be dropped. I am scared about dropping the phone, that's why I need a case at first place
I personally love UAG cases, but I don't like the hardcore industrialist look on them any more, I need something very simple yet elegant looking, like the Neo Hybrid.
Thanks.
Look at the UAG. Its pretty lightweight but may be more bulky than what you are looking for
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
1slow4G said:
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
Click to expand...
Click to collapse
This is not available in my location.
SilentJ20 said:
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
Click to expand...
Click to collapse
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
devilsdouble said:
This is not available in my location.
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
Click to expand...
Click to collapse
I also have the bearmotion bumper. Really love that bumper.
1slow4G said:
I also have the bearmotion bumper. Really love that bumper.
Click to expand...
Click to collapse
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
devilsdouble said:
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
Click to expand...
Click to collapse
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
1slow4G said:
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
Click to expand...
Click to collapse
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
devilsdouble said:
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
Click to expand...
Click to collapse
Yes it does. That's the temperature/humidity sensor btw
Have you looked at Otterbox?
ShadowLea said:
Have you looked at Otterbox?
Click to expand...
Click to collapse
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Right now the only option for me is to get a bumper, and in bumpers I can only have two, that Bear Motion one as suggested on previous page or some Amzer one, called Border Case or something, but I have no idea if that case has that cutout for the temperature sensor! Has anyone ever heard of this brand Amzer before? I certainly haven't! This is the case I am taking about,
http://www.amzer.co.in/Amzer-Border-Case-Black-P97313.htm
If that case doesn't have the cutout then my only option is to go for the Bear Motion one, but I don't think paying 2X price than what it's worth is reasonable by any means.
Lets see.
devilsdouble said:
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Click to expand...
Click to collapse
I've got the Commuter. It's a lot more elegant in reality than it looks in the pictures. (At least the black one is). But yes, it's a but bulky. It doubles the thickness if you count the rim on the front as well.
But if you want protection, something slim and sleek will not do much good. I've looked for those options, but they're all more for show than actual protection.
The diztronic tpu might be what you're looking for. Uag, spigen or especially otterbox are far from lightweight. I own the uag and I can drop the phone on any kind of surface without blinking, that case has serious protection. Otterbox is a tank, for construction people.
Yeah thanks guys.
@ShadowLea: Yeah I know that a bumper will not protect the device like an Otterbox would do or a UAG, but I am not looking for that much protection, just protecting the corners will do fine in my case, I think.
@lvnatic: Thanks. I know about UAG and Otterbox. I have used the Maverick on my S4 for a good four/five months, and it can protect the device in a lot of situations, but then I got tired of its look, too rugged, and that too when S4's backside was all glossy cheap type of plastic. For Note 3 and its backside material I can't think slapping a case on it, I just love touching that fake plastic It feels too good. If it were Note 2 or S4, I would not think a second before putting a case on it, because they felt that gross, to me.
Anyway, thanks all for the suggestions. For the time being I am going with a bumper, if I change my mind and consider a more protective case later then I will surely consider the suggested cases in this topic.
Does anybody know of a case that'll work with Samsung's wireless charging battery panel?
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
djak272 said:
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
Click to expand...
Click to collapse
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
1slow4G said:
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
Click to expand...
Click to collapse
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
djak272 said:
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
Click to expand...
Click to collapse
Figured that was the case (see what I did there ?)
I'll give it a try then, the looks are deceiving lol
What color you have? I'm stuck between slate and sliver
So I've tried in excess of 10 cases for my S8. The fact that I bought them on Amazon made the process long and tedious. I've tried 4 from Spigen and several no name brands. The latest one I've tried is the official sillicone case. It's great but too sticky and any dust or lint sticks to it solidly.
When I had an S7 I had a case I absolutely loved, this one:
https://www.amazon.ca/gp/product/B0...ge_o01_s00?ie=UTF8&psc=1&tag=androidcent08-20
Unfortunately, they don't make it for the S8 (yet they do for the Note 8 which is frustrating).
Anyhow, does anyone which case can be the equivalent of the one above? I want a hard-ish case, with at least the bottom uncovered but ideally the buttons as well, rubberized back and dark if not black. That's it.
Thanks!
https://www.amazon.com/gp/product/B06Y98H8C7
joe3681 said:
https://www.amazon.com/gp/product/B06Y98H8C7
Click to expand...
Click to collapse
Oh that does look like a good one. Have you used it? If that point design is not rubbery but rather plastic it's going to be annoying to hold. Plus that lack of a slight lip on front worries me.
Prosis said:
Oh that does look like a good one. Have you used it? If that point design is not rubbery but rather plastic it's going to be annoying to hold. Plus that lack of a slight lip on front worries me.
Click to expand...
Click to collapse
I use that one. It's got a rubber coating to it. Slim cases like that aren't meant for protection. No lip doesn't bother me as I have a glass protector.
joe3681 said:
I use that one. It's got a rubber coating to it. Slim cases like that aren't meant for protection. No lip doesn't bother me as I have a glass protector.
Click to expand...
Click to collapse
Oh I thought that being hard it would protect. OK then thanks!