[Q] Hard reset with power button - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Alright, I just bought my Dad a tab 10.1 yesturday since I found a really good deal on one. My problem is that when the tab freezes the only way to get it working is to hold the power button (about 10 seconds) from what I understand is that it should soft reset the device, but in our case it's being completely reset to factory settings. So is there another way to restart the tab? (On my Xoom it's Power and Vol Up) and is there anyone else having this issue? (pretty much, is this normal behavour?)
Now I'm not afraid to root and do all the goodness that is out there as I have done that on my Xoom and my Nexus One both of which were rooted within hours of recieving them, but since this is my Dads I would prefer not to.
The Tab is running 3.1, Kernal is 2.6.36.3 and the build is HMJ37.XXKG6 P7510XXKG6
Thanks for any insights

In order to reboot it, shut it down by holding the power button for 2 seconds until it shows the pop up menu - choose Power Off. When it is off, press the power button for 2 seconds again and it will start up.

baha that's a good one. As if I didn't try that already. The issue is that it was completely unresponsive to everything except a forced reboot. Too late regardless, it was returned yesturday.

Related

Can't get a shutdown menu on my CM7 touchpad.

For some reason I can't shut my touchpad down. If I hold the power button down, not much happens until I release the button. Then the screen turns off. Tap it again and it's back.
Any ideas?
thats strange try a hard reset, hold the power button and the home button down for literally a minute or so or until it resets. it will reboot into moboot hopefully. you might have to do that and go back into webos to completely shut down. good luck
Thanks for the reply, I was just trying it when the battery ran out!
But I'll give it a go if the problem returns, thanks.
Ran into the same problem today. The power menu, along with various power/reboot widgets wouldn't work, but after about 20 seconds of holding home+power it worked and booted to moboot.
I had this happen to a coworker, after I had recently upgraded her to alpha3. I tried everything to repair it before deciding to start from scratch. The best thing to do is restart using the power and home buttons (hold them until reboot).
Then think about reinstalling.
Good luck!
Sent from my Touchpad using Tapatalk
I had this same issue today. I downloaded Quick Boot from the app store and it allowed me to restart. Worked great
just happened me too, it MAY have something to do with low battery, i noticed someone above had the problem with low battery. mine happens to be low too
also, i turned off lockscreen earlier, maybe that was related.

[Q] Screen not working out of the box

Hi,
i recently bought 2 Galaxy S wifi 5.0 as there was a deal going. first one worked fine but a few days later and i've opened up the second one to find the screen isnt working.
its stuck at the 'select locale' screen from the initial setup with me unable to scroll and select any options. the back and menu keys don't work either although the home button seems to be doing something as the keys light up when pressed and it also works in recovery mode.
The volume key works as i can see the media volume going up and down when its pressed, it also worked when i booted into recovery mode to try a factory reset.
i can see the media scanning running after bootup and when i plug in the usb to a computer it appears with the USB connected (but ofc i cant press the button) so i think the system is running fine?
the power button seems a bit stickier than the one thats working fine and also when i hold the power button in to shut down the device (unable to press power off) it comes straight back on. is there way to force a shutdown rather than reboot?
just wandering if theres anything i can do to hard reset? im a bit reluctant to flash a stock rom / gingerbread as i have on the other one if the screen is just dead but thought id see if anyone had any ideas of anything i can try?
cheers,
Well, I would return it since it is still under 30 days (where did you get it?).
comet was £99.
yeh ill probs take it in tomorrow just wandered if there was anything i could do to double check the screen was definitely goosed

Power button broken? Wont boot up, wake up or sleep properly.

I am sorry for the noob post, I think that this is my first post.
My Transformer prime has a serious issue. I bought it in March and everything was wonderful until suddenly one day it refused to start up completely
It would vibrate, show the splash screen and then "asus" and the litle waiting icon, then the screen would go black and it would start over and do that over and over and over.
I read about the pin hole reset and it didnt change anything no mater how long I held it. I held the power and volume buttons to get to the built in recovery and it would still only work for about 10s before turning it self off and starting over.
After about 3hrs of trying everything I could think of I found a work around:
It will only boot if I hold the power button down the entire time that it is booting.
However, the power button doesnt do anything anymore. If I hit it the tablet wont go to sleep, I cant shut down the tablet with the power button, and it wont wake up with the power button.
In addition, at random intervals, my tablet will interrupt me and ask me if I want to shut it down.
If it does shut down, the only way to get it to turn on again is to plug it in and then hold down the power button until it boots completly.
I am fully stock, I dont know if I am rooted or unlocked. (sorry, Im a noob)
Please help.
I have the keyboard dock which is the only way I am able to resume from and put to sleep.
This problem occured under .21. I have since updated to .28 and no change. Factory reset and full wipe, no change.
xdreamerx said:
I am fully stock, I dont know if I am rooted or unlocked. (sorry, Im a noob)
Click to expand...
Click to collapse
when you start up the tablet, does it say unlock on the screen anywhere? *i believe it does....) if it is, you cannot use the asus OTA updates or it will break your device
i think your best bet is to do a RMA...

[Q] i777 Power button broken - Stuck in Recovery

Pretty sure I overheated the phone last night, and now the power button doesn't work. I fell asleep with it in my pocket, I got a call from my wife early in the AM, after the call I found the screen wouldn't turn off. So today, I've tried an app or two to replace the power button, tried a 3 hour battery pull, and in a brief instance of idiocy, decided to reboot into recovery to try and wipe everything and see if that would do anything - now I am stuck in CWM Recovery w/out any working power button so I cannot even exit. I've tried pulling the battery again and it just reboots into recovery.
Any tips on how to get it out? I want to pull my pictures and info, wipe the phone then sell it on ebay - What would I need to do?
if it is a custom recovery you can use ADB while booted into recovery.
adb pull /sdcard
Has anyone had a problem with just the power button not working at all anymore?
My SII had the problem recently that the power button just does not work, so I can no longer wake the phone up after the screen has shut off. I'm guessing it is a hardware problem because I even restored it all the way back to stock.
Does anyone know how hard it is to replace the button if it is bad?
I had my power button fail for several days on me (it has since started workign fine again tho). I was in a similar place but when pulling battery, my phone would reboot normally so i could at least use my phone while on the charger. I know that pulling battery, holding volume up/down and reinserting will boot you into recovery so i'm wondering if your volume button is messed up too? can you navigate up and down in recovery with the volume keys?
I had to get my button working to position myself to avoid the issue but I'm now pretty much power button free and running siyah kernel (touch recovery) and i use the Stweaks swipe to unlock feature, rootbox rom with a power menu toggle, and a lock screen widget so i don't have to use my power button at all. Again, i had to get my power button working to flash the kernel though maybe you can push the kernel with odin then you'll have the touch recovery to try wipes and resets with?
edit: here is a link of tearing down a 9100. I think our power button is the same- unfortunately it looks like you have to solder the new one in.
I couldn't find the part# for the i777 (or confirm if it's the same as the 9100) but the power button for the 9100 is KEY FPCB-POWER KEY(GT_9100) GH59-10916A and is about $5 online
here's a vid of the breakdown, he's replacing the screen but browses over the power/volume keys too.
http://www.youtube.com/watch?v=65pvAINg2ME

[Q] xoom power button

My Motorola Xoom WiFi's power button has stopped working properly. I believe that the button does work as I can use it to perform soft reset(pwr+vol up). But, it does not put the device to sleep or wake it. Not sure what happened... I took the device off of the charging dock four days ago and it has not worked since. Also does not remember my WiFi password if the screen times out. Once this happens I have to use power+ volume up to turn it on again. Waiting for reboot each time sucks. I would appreciate any help as I am somewhat of a noob. Thank you.

Categories

Resources