Related
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Update of 4/4
the following t-01d rooting procedures is provided by Magimaster
Hello.
I am sending this pm regarding the translation for flashing the Fujitsu f-05d sold by Docomo in Japan. I cannot reply in the development section due to my low post count.
My phone is an f-05d. I do not have a t-01d but, according to the original rooting guide for the f-05d, the users are reporting success in rooting the t-01d as well.
I will not really translate for you. Rather, I will explain what I did to root my f-05d.
Here is a rough summary of the steps I followed:
For starters, you need to make sure that adb recognizes your phone when connected to the PC via USB. This means that you need to install the Android SDK and the USB driver for your t-01d by Fujitsu.
I had trouble getting adb to recognize my phone, as Window$ insisted in recognizing it as an USB drive. What I did, among other things, was:
In the phone settings, go to Applications > Development and check USB Debigging and Stay awake.
Install the Google USB Driver package, in the extras section of the Android SDK Manager.
With the phone connected to the PC, go to Window$ device manager > Universal Serial Bus Controllers and uninstall (use the delete key from your the keyboard) every mass storage device that appeared when my phone was connected. Disconnect and reconnect the usb cable.
Only until I did this final step was my phone recognized and listed as Android Phone > Android Composite ADB Interface in the device manager. If your device is not recognized, you just cannot continue. Look for help about this, or else you cannot move on with this method of rooting.
Confirm that your phone is recognized as Android Phone > Android Composite ADB Interface in the Window$ device manager. Do not continue until it is.
From the Android SDK manager, install the package android sdk platform-tools.
You need download F05Droot.zip from the original blog page your linked before. I will not link to the file directly, but you should have no problem finding it. Extract the files within into the program directory \Android\android-sdk\platform-tools (this is my path).
You need to download a replacement for the file lsm_disabler.ko that is inside the F05Droot.zip. Get it from here and extract it an replace the one inside the platform-tools directory.
By the way, this platform-tools directory is the one that has the adb executable file. Just a heads up.
You need to download su. I cannot tell you where to get it. I just do not know where I got mine from, but was easy so go for it When you have it, extract it and put it in the platform-tools directory.
Confirm that the platform-tools directory includes these files:
Code:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
su
lsm_disabler.ko
f05dsu.bat
There will be more, but these are the ones needed for this to work.
Now, get ready to root. Connect your phone to the PC.
Go to your phone settings > setting my body > step/activity counter app > pedometer use and confirm it is checked on.
In the platform-tools directory, look for f05dsu.bat and run it. A DOS window will open. This is the funny part. Unless you are doing this from a Japanese version of Window$, or from a Window$ with Japanese locale active, you will see a lot of strange symbols instead of Japanese characters... which would be the same for almost anyone anyway Regardless, you will see a prompt to Press any key to continue . . .. At this point, you do not need to do anything on your phone, other than visually checking that the check mark on the pedometer is set.
On the DOS window press any key, your will see more garbage and another prompt to press any key. This is the important part. See if you can find among all those symbols this pattern: OFF/ON. If you do see it, it means we are on track.
Now that you were able to see the OFF/ON, go to your phone and uncheck the pedometer (OFF) and check it again (ON).
In the DOS window, press any key. Your phone will reboot. The message in the DOS window says that you must wait for the phone to boot up and for Window$ to recognize your usb connection to the phone.
When/if your phone is recognized by Window$, go to the DOS window and press any key.
Again, press any key and your phone will reboot.
The DOS window has a message indicating that you must now install superuser and busybox. When your phone reboots, go to the android market and install from there when you have the time.
You can now close the DOS window because, unless there was any error, you are now rooted, my friend
From the market, install a terminal, or an app that includes a terminal. I use Rom Toolbox because it has a terminal and scripts to mount the /system as rw.
Open whatever terminal you chose and, at the $ prompt type su
If new prompt is #, type soff
You will need to run these commands every time before trying to mount /system as rw.
That is all. I hope you can root your phone.
Just a petition, post this message in the forums, as it may help others who have similar difficulties. It sure could have helped me if someone had done before me.
Have a nice one and please forgive my English.
Click to expand...
Click to collapse
update 15/4
On 13/4 finally i got my phone rooted
I have to run f05droot.bat instead of f05dsu.bat
After I have run the f05dsu.bat, for the steps, no error popout.
then I open the terminal type su, it reply me "permission denied".
I know it is not successful, after several run, the situation still the same.
after that have checked the contents of f05droot.bat and f05dsu.bat.
They are very similar but the f05droot.bat will push the superuser and busybox into the device at the same time.
(so I added those files in the directory \Android\android-sdk\platform-tools )
Therefore, i tried that and its works finally.
I feel really exciting at that moment.
I hope this post can help they T-01d user to root the phone.
personally I really like this phone ^~^
the su file is also important
Anyone try it? Does it work?
I have got the source code from its web
But I dont know how to use that and lead me to root the machine
ttp://spf.fmworld.net/oss/t-01d/data/download.html
Can you post a review of this device?
redcarrot said:
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Click to expand...
Click to collapse
If you have time, can you please post a mini review of the device? I wanted to buy one too and I'm quite excited reading your review!
Thanks and more power!
Here is the mini review
Screen color is perfect except black and accurate. Speed is good in comparing with SGS2. Battery life is similar to SGS2. Form factor is better than SGS2. Camera is outstanding, thanks to the 1.3MP camera. Waterproofing design is what I like. The bad is upgrading is only possible in Japan. Digital TV is useless. Sound level is a bit low.
personally i like this phone very much especially the outlook.
my personal review is the following:
1. same as above the screen is perfect
2. the camera is also excellent
3. while you have a phone call, it change mode automatically depends on the environment
4. if i switch off all the data things, this phone can stand more than one day
(so i wont blame the battery, because I think we use too many network related stuffs)
5. i have to admit that the firmware is not quite stable (fortunately the phone can be upgrade to 4.0 after july)
for the rooting process, it seems like someone has success:
(i think that is temp root)
search "T-01D 軟解, tofu-keitai" in google (that is chinese unfortunately)
redcarrot said:
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Update of 4/4
the following t-01d rooting procedures is provided by Magimaster
Click to expand...
Click to collapse
It really work!~
I rooted my T-01D with this method!
And it's permanent root!!
Many thanks!~
hi HaoyuWen,
i have followed the steps, when i type su in the terminal simulator, it comes out segmentation fault su, do you have any idea.
I use titanium backup to check and it said my t-01d is not rooted.
for the pedometer on/off things, do i need to press the home key and go back to the pedometer to do the switch?
Thank you very much in advance
HaoyuWen said:
It really work!~
I rooted my T-01D with this method!
And it's permanent root!!
Many thanks!~
Click to expand...
Click to collapse
So both F-05D and T-01D can use this ?
yes, but i havnt got that work yet.
just want to know when I get the device rooted, will the device screen shows the device is rooted?
finally i got my phone rooted
you have to run f05droot.bat instead of f05dsu.bat
the su file is also important
redcarrot said:
yes, but i havnt got that work yet.
just want to know when I get the device rooted, will the device screen shows the device is rooted?
Click to expand...
Click to collapse
You can install a root checker to see
^ Please update it on the front page
Gonna get mine soon, so excited to hear this
wth_is_life said:
You can install a root checker to see
^ Please update it on the front page
Gonna get mine soon, so excited to hear this
Click to expand...
Click to collapse
I think I brick my T-01D. Don' know why, I do exactly the same what I have been told here... Now It ends up infinite boot loop
Anybody help me please?
Hey there everyone, sadly this guide isn't working for me. Everything in the guide goes smoothly and I do exactly what is listed but after my phone reboots the final time I still have no root access. I run f05droot.bat instead of f05dsu.bat like the user said but to no avail, I even ran f05dsu.bat and still nothing.
Anyone else have trouble? Maybe it is because I am on a certain FW? I am on 2.3.5
Baseband Version C_L1_M23
Kernel version: 2.6.35.7 [email protected] #1
and Build number is V43R41C
Just wondering as I really want root to disable all of these RAM-hogging default applications.
Bump? Anyone?
As far as I know, this rooting method cannot be done on FW V43R41C.
Sent from my SC-01D using Tapatalk 2
kinchung said:
As far as I know, this rooting method cannot be done on FW V43R41C.
Sent from my SC-01D using Tapatalk 2
Click to expand...
Click to collapse
Aw Thanks for the notice, of course it's my firmware. Any idea about ICS? It was supposed to come out in July but yeah..
I don't know about ICS for t-01d. My sc-01d has been already upgraded to ICS, the performance is improved a lot. sh-01d also gets ICS today.
Sent from my SC-01D using Tapatalk 2
kinchung said:
I don't know about ICS for t-01d. My sc-01d has been already upgraded to ICS, the performance is improved a lot. sh-01d also gets ICS today.
Sent from my SC-01D using Tapatalk 2
Click to expand...
Click to collapse
I see, I read about the T-01D (among many others) getting updated from articles like this: http://forums.hardwarezone.com.sg/e.../docomo-update-ics-4-0-18-models-3662812.html
I'm sure the T-01D would perform pretty awesome and maybe pre-installed software would not be as big a deal as it is now. Maybe since your SH-01D is getting updated, T-01D isn't far behind. The only thing I have to see is if I can update out of Japan.
I don't have sh-01d but galaxy tab 10.1 sc-01d instead. My t-01d also upgraded to V43R41C last month during visiting Japan. Upgrade of t-01d may not be possible outside Japan as Software Update cannot be executed without docomo sim and network.
Sent from my SC-01D using Tapatalk 2
I am trying to find a how to root idea usa 7" tablet from fry's for $77.00. Their is a lot of rooting programs but I have not been able to find anything on this model.
Also what would be a good rom to flash it with? I tried finding out if uberoid or cyanogenmod would work but I could not find any info on this model.
Not to sure what model I have that I would be able to flashing this rom with, either uberoid, cm7/cm9 or miui? Help
Model: MID, sv7206 v1.4, kernel 2.6.35.7-infotm
processor armv6 rev5,
hardware imapx200,
android 2.3.3,
brand infotmic,
display gri40,
release codename REL
bootloader unknown
I don't know if this is the right model IDea USA IUMID-0071 because the spec's are off. Http ://ideausa.us/produects.html but similar. I am looking for rom that is more update/modern. any potters?
Does anyone have the original rom for this or know how to make a backup this rom?
Well I am thinking that is might be this model but not to sure wm8650,SV7206 v1.4 or IDea USA IUMID-0071.
The screen is very slow on this model. Unless you use a pen then is works better.
Also hoping to be able to flash this to ics 4
Just trying to get some clarification.
Try running the superoneclick batches. Shortfuse.org
Sent from my HTC Sensation Z710e using XDA App
Thanks, I am download it right now.
Also can you use airdroid to do a backup or has anyone tried this yet and maybe upload a rom that way? any thoughts?
Thanks
Never heard of airdroid
Sent from my HTC Sensation Z710e using XDA App
AirDroid is a fast, free app that lets you wirelessly manage & control your Android device from a web browser Over-The-Air. Just for anyone that wants to know.
I don't know if airdroid can copy all of your file to the desktop from your browser. But I don't know how the file system works for the android. So I wouldn't know if it can or is there a good place to read about the android file system? Wait I know I will google that. google is my friend. But I was hoping for a more advance person that could answer on this topic than me.
Thanks
U have to have a custom recovery to do nandroid backups
Sent from my HTC Sensation Z710e using XDA App
I have not been able to connect this device to the computer. Nothing is being recognize. It does not show up under linux os either. I am not sure what drivers will work for this thing. USB debugging is also enabled.
Any ideas?
Thanks
Rooting Idea USA Tablet
Oh my, what a mess...
This post is in regards to the Idea USA Tablet (Unable to Root)
My specs:
- Idea USA Tablet (Made in China)
- Model Number: MID (Unknown)
- Android Version: 2.3
- Kernel Version: 2.6.35.7
- Build Number: MID-userdebug 2.3 GRH55 (ENG)
Issues:
Whelp, I have tried the basics and I can't get this thing to root for anything. I was able to get it to hook into the PC through USB. There are 2 usb slots on the side of the tablet. I believe one is for HOST and the other usb is for OTG (Charging). Once I figured out the host port, then I had to download the drivers for this poorly made tablet...But, what drivers? You go to the Idea US website and you get no helpful information. So, there are no drivers made specifically for this $100 dollar generic tablet from FRY's. Ok... No big deal... So, I download the default "Android USB Drivers".
Peachy, it worked! Now, I can transfer files back and forth between the card(s). Wonderful, first step down, next step was to root. So, I read up on how to root with Super One Click.
Ok, so now, I set the tablet to "USB Storage" and "Host"...Then I download and run Super One Click.
Ok, I run the "Super One Click v.2.3.3"; by clicking the root button and then all I get is a frozen screen that reads:
Code:
Killing ADB Server.... Kill Server 0.11s
Starting ADB Server.... StartServer 4.09s * daemon not running. starting it now on port 5037* *daemon started successfully*
And then it just freezes the program. So, now I'm completely stuck. I mean I learned a great deal, that I can hook up a keyboard, mouse, etc to this thing, but, obviously Super One Click was not designed for these generic tablets. I have read other articles which have suggested that the .inf driver for the default "Android USB Drivers" needs to be edited for your specific tablet model and you must enter the specific CODE# for it to recognize for rooting with Super One Click... But, god forbid, I haven't found any useful information on where that might be. Also, someone suggested to install the Android SDK and edit those files along with the .inf files to make this work. But, that didn't work either. I did everything right. I turned off USB debugging and then I would wait for super one click to come up with waiting for device...but that never happened. I even tried it with USB debugging on... still nothing.
Has anyone created a generic batch program to root these types of devices? What am I doing wrong here?
Since every tablet is different with different boot mangment. Makes it hard to make a generic root kit.. and being a frys computer salesman I try very hard to talk people out of those things unless. They swear they are only us8ing it for facebook
Sent from my SPH-D700 using xda premium
Rooting Idea USA Tablet
Well, this took me all night to read and learn about how to root this basic tablet from Fry's.
First off, I tried many different things and it just didn't work. Using super one click is definitely out of the question for this particular tablet.
I read all night and thankfully found the forum article on how to solve this issue on xdadevelopers own forum.
As per quoted quotes below:
.....You can use gingerbreak to root this. Run it once and let it reboot, then use supermanager free from market to rename the su symlink from /bin/ to "old" or something, and reboot again.
You should now have root ........ It might take a couple of trys but it works.
You need to download supermanager from the market. Enable root in supermanager settings and click yes when superuser pops up.
Then use the file explorer within supermanager to navigate to the /bin/ directory and you will find a sysmlink called su
You need to rename this su symlink to old - completely take out the name su.
Just to be safe run gingerbreak again and then you can install busybox from market.
pablo11
Click to expand...
Click to collapse
Thank you so much Pablo11. The idea is to download the APK for GingerBreak from online onto your IDEA USA tablet directly. The trick here is that the brand name is IDEA "USA", but the real workings behind the "MID" is "ViMicro". You will notice that displayed as you turn on your tablet. So, in order to find real information about your MID device, you have to search articles for vimicro.
Once you run gingerbreak, your tablet will go completely nuts. Nothing will run right. Things will break and it will be a complete mess. It will however, install superuser apk. However, it will not work. You can download the Root Checker from the market and you will notice it is NOT rooted. So...thanks to pablo11, you will want to download supermanager from the google play market. Install it.
Next go into the supermanager settings and click on ROOT. Make sure root is enabled and checked marked in the settings. When you enable root in the settings, it will prompt you with "allow root?" Click on Yes. This will give you the access you need.
But, your not done, once again as per Pablo11, go to the super managers file manager section. Get to the root directory by clicking up, and then find the folder "bin". Look for the file "SU" and rename this to "old".
Now, you will be able install busybox and any thing else thats root.
By the way, restart your tablet again, and I "personally" recommend that you go into your settings> Privacy> Check mark both (Backup my data and Automatic Restore) and then click on Factory data reset. Start the tablet from like it was brand new. Don't worry it will keep the root that you did intact. You will just have to re-register the tablet with your existing gmail that you originally used with that tablet.
Lastly, use the root checker from the market and you will see that it is successfully rooted.
Okay... Now, my next step. To crack open this tablet and put in a bigger SD Card as the 2G SDCARD is way too small, especially if you want to use new roms and install a linux operating system onto it....
@njbsuperman story telling of Pablo11's method worked for me. I have a generic android 2.2 7 in. "MID" white box, picture of the tablet on each side all of that and it worked for me. Had to restart and run ginger break a couple times but I followed the directions and it worked.
Thanks for posting this, got this for my 6 yr old for his b-day and of course I gotta ****in tim allen it and I happened to stumble across your findings and your post you put up 2 days before the unwrap. Thanks...smoke blunts.
Using Unlock Root to Root IDeaUSA Tablet
I know that this thread is a few months old, but I thought that I'd share what I used to root my 7" IDeaUSA YG A777 Android Tablet. I used Unlock Root. It's a simple program that rooted my tablet in minutes with one click. This site won't let me insert links in posts (I'm new to this site), but you can find the program by typing "Unlock Root" into Google. It should be the first site that comes up.
Same here
Yes i used unlock root also and it worked for me/....
Rooting IdeaUSA CT-702
kokomelala said:
Yes i used unlock root also and it worked for me/....
Click to expand...
Click to collapse
I have the CT-702 with Android 4.0.3 and can't get past the USB connecting to the storage devices. I can manipulate the files on the internal and external cards but any attempts to use the unlockroot package (from unlockroot.com which is full of adware) or other packages (z4root, ICS Root Unlocker 1.0) do not detect the device. There is a payware unlockroot package at unlockroot.org. Is this the package that works? Is there a no computer apk like gingerbreak (which fails) available or a procedure to get past the USB business.
is there a way to root the idea USA ct-705
I've recently purchased the CT-705 and been trying to find any information on rooting this device but all if have found are other people with the same problem can anyone help
specs
Model:
CT705
Android version:
4.1.1
Kernel version:
3.0.8+
[email protected] #877
SMP PREEMPT Fri Jan 11 10:12:03 CST 2013
Firmware version:
([email protected])_([email protected])_N2.59_V411.01_TL12
Build number:
RK30_ANDROID4.1.1-SDK-V1.00.00
rk30sdk-eng4.1.1 JRO03H 20130111.093246 release-keys
any and all info is appreciated thanks
Another CT-705
@captinmudslide,
I'm in the same boat as you, in fact we must have bought them about the same time. I'm hoping that you are following this thread, and that you found something that works to root this beast. I 've been digging and trying any and everything I can find that works on other android devices. I was hoping that holding the power button and vol+ or vol- would get me somewhere. Vol+ at least gives me the dead robot, but can't do anything with it. Was hoping that if the adb server was running it would connect. Nope.
Anybody monitoring this thread, feel free to offer something that hasn't already been covered previously.
Thanks.
njbsuperman said:
The idea is to download the APK for GingerBreak from online onto your IDEA USA tablet directly. The trick here is that the brand name is IDEA "USA", but the real workings behind the "MID" is "ViMicro". You will notice that displayed as you turn on your tablet. So, in order to find real information about your MID device, you have to search articles for vimicro.
Once you run gingerbreak, your tablet will go completely nuts.
Click to expand...
Click to collapse
Holy crap, I rooted the device.
If anyone needs this later, here's what I did:
Fist I pulled down SRS Root, Unlock Root, Gingerbreak and the generic Google USB drivers.
I went into the properties of the missing driver CT1006 and checked the hardware ID. I opened android_winusb.inf and added the lines:
;ProScan plt-7035
%SingleAdbInterface% = USB_Install, USB\VID_2207&PID_0010
%CompositeAdbInterface% = USB_Install, USB\VID_2207&PID_0010&REV_0222&MI_01
under the headings of [Google.NTx86] and [Google.NTamd64].
I ran Gingerbreak a few times, per a thread I read, but the app would hang. I tried it 3 times.
Then, I went back to Device Manager and selected "Update Driver" and pointed to the .inf I edited earlier. I detached and reattached the device via USB to my PC and ran SRS Root, which still reported an error. Then I ran Unlock Root and the first time it said my device was already rooted, but I told it to root again. It did and my device rooted. I then looked in my apps and found SuperSU installed and was able to run Sixaxis Controller, which requires root to run, which confirmed root worked.
I don't know which step actually solved the issue, but hopefully if anyone has this issue in the future, they can figure that part out.
iDeaUSA CT705 (RK3066) Rooted
... CT-705 ... [email protected])_([email protected])_N2.59_V411.01_TL12 ...
RK30_ANDROID4.1.1-SDK-V1.00.00 rk30sdk-eng4.1.1 JRO03H 20130111.093246 release-keys...
any and all info is appreciated thanks
Click to expand...
Click to collapse
I've been able to root this tablet using Kingo ROOT, with the "latest_usb_driver" from Google (1/27/2014).
I have set:
c:\users\{USERNAME}\.android\adb_usb.ini
with the value: 0x2207
And have used the RK_DriverAssitant available online
It takes a lllllllloooooooooonnnnnnnnggggggg time for my Windows 8.1 x64 to recognize it, but eventually it will show with:
c:\adt\sdk\platform-tools>adb devices
List of devices attached
0123456789ABCDEF device
Then run Kingo ROOT.
C.U.tech
You can root with:
POOT: This app is a one click root app. No computer needed
Framaroot: Framaroot is a oneclick root app . No computer needed
This is the most popular one!
Z4Root: Z4Root is an oneclick root app . No computer needed
Towelroot: Towelroot is an oneclick root app. No computer needed
Baidu: No information
Vroot: No information
Gingerbreak: This app can root almost all gingerbread devices
Downloads:
Poot - Download the app >>here<<
Framaroot - Download the app inside this XDA Thread - >> CLICK HERE <<
Z4ROOT - Download the app inside this XDA Thread - >> CLICK HERE <<
Towelroot - Download the app inside this XDA Thread - >> CLICK HERE <<
Baidu ROOT - Download the app >> HERE <<
vROOT - Download the app >> HERE <<
Gingerbreak - Download the app inside this XDA Thread - >> CLICK HERE <<
Flash a SU ZIP - Download the ZIP >> HERE << and flash it on your unlocked bootloader phone !
Hit thanks if you liked this post or this post has helped you out !
How do you calibrate the touchscreen in ics?
the calibration.ini trick does not seem to work
(I can't even find the TSCalibration program anywhere ...)
albright said:
How do you calibrate the touchscreen in ics?
the calibration.ini trick does not seem to work
(I can't even find the TSCalibration program anywhere ...)
Click to expand...
Click to collapse
Do the calibration through CWM. Run the "echo ..." command here after an "adb shell".
no such directory as /sys/devices/platform/tegra_touch on ics
albright said:
no such directory as /sys/devices/platform/tegra_touch on ics
Click to expand...
Click to collapse
I know. Which is why I suggested doing it using CWM. See post #2, above, again.
I *did* read that - but I have only the faintest conception
of what an adb shell is. I don't particularly want to go to
the trouble of installing the sdk for which I have no need.
That's why I *hoped* the simpler way in the original post
might work.
albright said:
I don't particularly want to go to
the trouble of installing the sdk for which I have no need.
Click to expand...
Click to collapse
FYI: I don't think you need to install the entire SDK just to run ADB. The adb executable (and, its libraries) alone should suffice--it does on Linux.
That's why I *hoped* the simpler way in the original post
might work.
Click to expand...
Click to collapse
There is a simpler method now. Go through that post again. I've got a zip file there which you can flash using CWM.
There is a simpler method now. Go through that post again. I've got a zip file there which you can flash using CWM.
Click to expand...
Click to collapse
that's great. There's a warning about which kernels work but
I assume that the kernel in ics is OK, right?
Edit: sorry, you meant the CWM kernel so that's OK
Edit2: and it works fine - many thanks
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
coby 1125 ics touch screen calibrate
Could any of you please help. I upgraded the coby from gb to ics using the various techniques listed. I was eventually successful, however, I can't really use it because the touchscreen seems to be backwards, and mirrored. If I'm not mistaken, it seems calibrated for the 8127, where mine is 1127 10" widescreen. the "about" displays it as Model# mid8127, o.s. ver 4.0.3. I can't use any aps to correct since no file manager is present, and it is next to impossible to type through get jar. I couldn't follow the directions on this thread keenly, so please explain step by step. Though I got ics to work, somehow, I'm a rookie, and don't understand tech stuff that much. I have access to ubuntu 12.04, and windows, so I can connect the tablet, which I have done, but I don't understand how to use abd, nor cwmmanger. I tried, but got confused, though I was on windows 7. Please give me the steps in plain terms how I may use ts_calibrate, or any other method to c orrect the touch issue. If there were a way to access the start menu or file responsible and edit that. Such was the case on another tablet of mine the wm mid8650, where a similair issue occured installing uberoid. I had to edit for the 8" screen vs the primary 7"
Thanks!
xyphoid said:
Could any of you please help. I upgraded the coby from gb to ics using the various techniques listed. I was eventually successful, however, I can't really use it because the touchscreen seems to be backwards, and mirrored.
Click to expand...
Click to collapse
You should talk to the guys who created the ICS for your tablet. They're the ones who'll be able to help you.
I couldn't follow the directions on this thread keenly, so please explain step by step.
Click to expand...
Click to collapse
The steps in this thread are specific to a) the Tegra 2 Harmony-based tablets manufactured by Malata (eg. the ViewSonic gTablet) and b) to the stock or stock-derived kernels for those tablets.
rajeevvp said:
You should talk to the guys who created the ICS for your tablet. They're the ones who'll be able to help you.
The steps in this thread are specific to a) the tablets manufactured by Malata (eg. the ViewSonic gTablet) and b) to stock, or stock-derived, kernels for those tablets.
Click to expand...
Click to collapse
I see, missed that. Thanks anyway, but the version is initially from coby germany i presume, but I may have picked mine up from a thread link, and since I've visited many souces, I'm not sure. I could contact coby germany, but not sure how forthcoming they would be. Thanks anyway! I think this needs to be done on sd card some how.
Thank you, rajeevvp!!!! Flashing the zip file through CWM has definitely made touch sensitivity miles better. Working great now!!!
I recently recieved a Double Power M975 9" tablet as a gift. I have been unable to find any information regarding rooting this tablet.
I am not a total n00b, but rooting is not my forte. I can follow instructions and make logical connections well enough to do a root, but I am honestly at a loss for how to root this thing.
I don't know what all information is required for someone smarter than I to figure it out and relay the steps, but here's the basic info of the Tablet.
Double Power M975 (aka DOPO)
Android Version 4.04
Kernel 3.08+ (also says [email protected] #99, dunno if that's important)
Build Number A9 v01b
Internal Storage is 0.98Gb, with NAND Flash of 5.27Gb, and I have a 32Gb Micro SD card in it.
9" Screen
If anyone knows how to root this thing, or if you need more info, please let me know below.
Thanks in advance.
Im having the same problem man
No123abc said:
Im having the same problem man
Click to expand...
Click to collapse
I'm actually surprised there isn't more info or already a guide for this specific tablet, as it's available at Walmart and online, it's cheap and is the best option in its price range for size and the fact that is has Google Play pre installed. It's not a powerhouse, to be sure, but it has been around long enough that I thought someone would know how to root it already. I just wish I knew enough about rooting Android to figure it out myself.
bump
I'm still not having any luck finding any info on rooting this specific device, or even generic root for 4.04.
blackholepcs said:
bump
I'm still not having any luck finding any info on rooting this specific device, or even generic root for 4.04.
Click to expand...
Click to collapse
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
coldpint said:
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
Click to expand...
Click to collapse
DUDE!!! Thank you so much! It totally worked!
For anyone who reads this, know that the linked .pdf is out of date. The majority of it is still valid, however the adb_usb.ini file does not exist. You will have to manually create it in the listed location (make sure to remove the .txt extension and make it an .ini) and the sdk manager file does not exist. You can access the sdk manager through eclipse.exe in the Eclipse folder.
coldpint said:
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
Click to expand...
Click to collapse
This worked great! Thank you!! Now I have to figure out how to make a custom rom...
---------- Post added at 10:13 PM ---------- Previous post was at 10:08 PM ----------
blackholepcs said:
DUDE!!! Thank you so much! It totally worked!
For anyone who reads this, know that the linked .pdf is out of date. The majority of it is still valid, however the adb_usb.ini file does not exist. You will have to manually create it in the listed location (make sure to remove the .txt extension and make it an .ini) and the sdk manager file does not exist. You can access the sdk manager through eclipse.exe in the Eclipse folder.
Click to expand...
Click to collapse
You must have downloaded the ADT Bundle. I did too the first time.
On the Android SDK website if you click "Download for other platforms" then under "SDK tools only" select the zip file for windows you will get the package referred to in the pdf.
I also had to go into device manager and manually update the driver via the method described in the pdf.
The more you know...
Okay so how come I'm the only one not having any luck with this? I'm new to the whole rooting thing BTW...
DanaDizane said:
Okay so how come I'm the only one not having any luck with this? I'm new to the whole rooting thing BTW...
Click to expand...
Click to collapse
What exactly are you having issues with? Are you getting errors? Can't download something? Be specific. The more information you give the better we can help you. Write a story if you need to.
Sent from my SPH-D710 using xda app-developers app
Anyone Know how to get CWM?
Thanks a bunch!
coldpint said:
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
Click to expand...
Click to collapse
Thanks so much for sharing this information! I just got my tablet today and I'm about to try this. My daughter has the 7" inch tablet by dopo and I'd like to find info. on how to root hers too. I've looked for months for this info. since we got hers.
Whew hoo! One thing's for sure, I can always come here to get the best android resources!
for ADB USB drivers for your computer, download: pdanet+
I was having problems with loading Android ADB USB drivers on my computer by way of methods found for this post but found that USB drivers loaded correctly when I installed PDAnet+ for the computer. So if you are having problems installing Android ADB USB drivers give pdanet+ a try
dopo M975 Root!!!!
root unlock software free from web i used it took me about 30 secs to root still having prob with custom rom so if anybody has any ideas that would be great. download free run plug tablet in and hit root. unlockroot.com
another option for root
root rk29 tab toolkit 1.3 google it already on xda
Problem with .ini file
coldpint said:
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
Click to expand...
Click to collapse
Hi, I know u posted a while back. I tried this on my M975, but my PC doesn't install the driver; it says incorrect line on INI file . Would u be willing to post your INI so I can see if we got the same format? Also, could u please explain how u used the root kit to actually root? Thnx.
Hey all.
I have a DOPO EM63 7" tab, and I'd like to share how I rooted it. I figure most of the DOPO devices will be the same.
1.) Install JDK, Android SDK (the zip file {choose download for other platforms}) and do everything else in steps 1-12 from the pdf in this thread.
2.) Go here (xda link) and do steps 2-11
3.) Laugh about how easy it was.
If anyone can't look at the pdf and other thread, I can post full steps.
It works. Out of every method I've tried, this one worked.
I have to add, some steps are outdated (ie. Step 7 from the link: just click "Root" on the pc screen)
And yes, the program is in Chinese - but it is easily understood (everything you need is in English)
Also, I don't know if the Moborobo program is necessary (seeing as we have drivers already) but it doesn't hurt to use it anyway.
orangeisnon said:
Hey all.
I have a DOPO EM63 7" tab, and I'd like to share how I rooted it. I figure most of the DOPO devices will be the same.
1.) Install JDK, Android SDK (the zip file {choose download for other platforms}) and do everything else in steps 1-12 from the pdf in this thread.
2.) Go here (xda link) and do steps 2-11
3.) Laugh about how easy it was.
If anyone can't look at the pdf and other thread, I can post full steps.
It works. Out of every method I've tried, this one worked.
I have to add, some steps are outdated (ie. Step 7 from the link: just click "Root" on the pc screen)
And yes, the program is in Chinese - but it is easily understood (everything you need is in English)
Also, I don't know if the Moborobo program is necessary (seeing as we have drivers already) but it doesn't hurt to use it anyway.
Click to expand...
Click to collapse
Has anyone found a customs recovery for these dopo tablets or Roms? The 7" I got my Lil one last yr from walmart was rooted out of the box.
i got a m980 model and for some reason every time i turn off and on start with Chinese letter and need be configured again any idea?
orangeisnon said:
Hey all.
I have a DOPO EM63 7" tab, and I'd like to share how I rooted it. I figure most of the DOPO devices will be the same.
1.) Install JDK, Android SDK (the zip file {choose download for other platforms}) and do everything else in steps 1-12 from the pdf in this thread.
2.) Go here (xda link) and do steps 2-11
3.) Laugh about how easy it was.
If anyone can't look at the pdf and other thread, I can post full steps.
It works. Out of every method I've tried, this one worked.
I have to add, some steps are outdated (ie. Step 7 from the link: just click "Root" on the pc screen)
And yes, the program is in Chinese - but it is easily understood (everything you need is in English)
Also, I don't know if the Moborobo program is necessary (seeing as we have drivers already) but it doesn't hurt to use it anyway.
Click to expand...
Click to collapse
I get to the step where I press root on the comp while it's open on my computer, an the program crashes and I fail to get root.....any clue?
EDIT: For those of you with a DOPO em63. It took a lot of research and digging, but I found an app called RootGenius. Very simple program, I ran it and it worked.
Here is the post, it's here on xda http://forum.xda-developers.com/gen...uble-power-em63-7-4-2-2-t2811412/post54045765.
Oh happy day!
cstryon said:
EDIT: For those of you with a DOPO em63. It took a lot of research and digging, but I found an app called RootGenius. Very simple program, I ran it and it worked.
Here is the post, it's here on xda http://forum.xda-developers.com/gen...uble-power-em63-7-4-2-2-t2811412/post54045765.
Oh happy day!
Click to expand...
Click to collapse
That's awesome! I actually cracked mine (a single tear rolls down my cheek) but a relative gave me hers, which is an identical model (tear dries up instantly), so I'll try this as soon as I can. Will let you all know what happens.
I'll check my build, too.
Thanks for the info!
EDIT: Please make that your signature ("Oh happy day!"). That would make me very happy.
A friend of mine picked up a Proscan PLT7044k. Great cheap tablet from BigLots they wanted to gift me as a late birthday present. Sure it's cheap, but cheap can be good right? Especially if it's a backup device or something to tinker with.
Trouble is we're running into some issues. Fine. Great it's a cheap Chinese tablet. We both get that we're not expecting nexus or ipad mini or even kindle fire quality. However GetJar is, apparently, not working correctly, Amazon Marketplace (which it was linked to in the device) will not let you change settings, and My friend isn't wanting to try rooting to get google play working just yet because we're not sure if the Thread found on the matter has all the bugs worked out.
This Thread seems to be closest to what 'we' want but the model number is different (it's supposed t obe the same device save for the one we're working with included a hardware keyboard/case, but one never knows.)
Of Note when queried my friend only saw a one gig internal storage device instead of the four gig advertised and described the external media slot as a SD slot instead of a micro-sd.
So, since I am, for the moment, treating this device as different and not wanting to risk bricking before info can be gained on if it's worht keeping or taken back, trying to figure out the following:
Very minimum how does one get google play on this gizmo.
Is there anything that can be done about the touch screen lag?
Is there a CyanogenMod port that will work or other custom rom that might help with the issues of lag?
Any advice would be welcome/useful. Even 'RTFM' with links to other threads.
Edit: Be Aware my 'primary' computer is running linux (peppermint OS3, ubuntu 12.04 based distro.)
I just got this tablet. You have root accesses out of the box. There are 2 ways I have installed play store. Through root explorer and through adb push. google gapps for jellybean. here is the manual and firmware proscanvideo.com/item.asp?itemnmbr=PLT7044K . I can make a tute anyone needs.
I ended up taking mine back and getting a Nook Touch. Sure I'll still need to root the thing to get much use out of it beyond being an e-reader but even with it not-rooted it's still actually a pretty good experiance.
Sorry Icouldn't be a trailblazer to anyone getting a proscan and wanting to improve on it.
a noob, but I honestly have tried...
Tearran said:
I just got this tablet. You have root accesses out of the box. There are 2 ways I have installed play store. Through root explorer and through adb push. google gapps for jellybean. here is the manual and firmware proscanvideo.com/item.asp?itemnmbr=PLT7044K . I can make a tute anyone needs.
Click to expand...
Click to collapse
ok, I have tried very VERY hard to find out how to root my proscan plt7044k. I've tried following the few links that I have found, and have found them to be broken. Or the items just won't download onto my computer or just flat don't work. It appears that what I have to do is to find a driver for this thing so that my computer can recognize it, and the Curtis website doesn't give any driver information. Yes, I did download their manuals and tech material, and they DON'T WORK. All they provide is a powerpoint thing that says to "find program x, do y, etc", without providing that program. I cannot find a driver for this p.o.s. ANYWHERE, nor any that would work for an earlier model and then also "might" work for mine.
I really want to get rid of the "getjar" crap, as well as all of the bloatware that google puts into these things!
Tearran said:
I just got this tablet. You have root accesses out of the box. There are 2 ways I have installed play store. Through root explorer and through adb push. google gapps for jellybean. here is the manual and firmware proscanvideo.com/item.asp?itemnmbr=PLT7044K . I can make a tute anyone needs.
Click to expand...
Click to collapse
I have checked device for root it is not rooted out of the box. If you have a tutorial to actually get root it would be appreciated.
Sent from my SGH-T889 using xda premium
musicafe said:
I have checked device for root it is not rooted out of the box. If you have a tutorial to actually get root it would be appreciated.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
The tablet is semi rooted out of the box it only needs supersu (http://forum.xda-developers.com/showthread.php?t=1538053). You need to adb push this file.
[HOW-TO] Install & Use ADB tool (http://forum.xda-developers.com/showthread.php?t=1474956)
How to push files through ADB (http://forum.xda-developers.com/showthread.php?t=642437)
Basic adb/shell commands for noobs (http://forum.xda-developers.com/showthread.php?p=3820215)
Tearran said:
The tablet is semi rooted out of the box it only needs supersu (http://forum.xda-developers.com/showthread.php?t=1538053). You need to adb push this file.
[HOW-TO] Install & Use ADB tool (http://forum.xda-developers.com/showthread.php?t=1474956)
How to push files through ADB (http://forum.xda-developers.com/showthread.php?t=642437)
Basic adb/shell commands for noobs (http://forum.xda-developers.com/showthread.php?p=3820215)
Click to expand...
Click to collapse
I've looked everywhere including the links you provided, and adb don't find this device, oh well, bout to give up on this
side load
Goggles2114 said:
A friend of mine picked up a Proscan PLT7044k. Great cheap tablet from BigLots they wanted to gift me as a late birthday present. Sure it's cheap, but cheap can be good right? Especially if it's a backup device or something to tinker with.
Trouble is we're running into some issues. Fine. Great it's a cheap Chinese tablet. We both get that we're not expecting nexus or ipad mini or even kindle fire quality. However GetJar is, apparently, not working correctly, Amazon Marketplace (which it was linked to in the device) will not let you change settings, and My friend isn't wanting to try rooting to get google play working just yet because we're not sure if the Thread found on the matter has all the bugs worked out.
This Thread seems to be closest to what 'we' want but the model number is different (it's supposed t obe the same device save for the one we're working with included a hardware keyboard/case, but one never knows.)
Of Note when queried my friend only saw a one gig internal storage device instead of the four gig advertised and described the external media slot as a SD slot instead of a micro-sd.
So, since I am, for the moment, treating this device as different and not wanting to risk bricking before info can be gained on if it's worht keeping or taken back, trying to figure out the following:
Very minimum how does one get google play on this gizmo.
Is there anything that can be done about the touch screen lag?
Is there a CyanogenMod port that will work or other custom rom that might help with the issues of lag?
Any advice would be welcome/useful. Even 'RTFM' with links to other threads.
Edit: Be Aware my 'primary' computer is running linux (peppermint OS3, ubuntu 12.04 based distro.)
Click to expand...
Click to collapse
You can side load the Play Store, also, what version of Android is the tablet running?
IRIE4IPIER said:
I've looked everywhere including the links you provided, and adb don't find this device, oh well, bout to give up on this
Click to expand...
Click to collapse
You probably have a driver problem. I use ADB Konnect (wireless ADB) To push over wifi.
Is there any possible way to flash a custom ROM to it the factory ROM has too much crap on it memory wise?
JayMax03 said:
Is there any possible way to flash a custom ROM to it the factory ROM has too much crap on it memory wise?
Click to expand...
Click to collapse
I Titanium backup to uninstall the bloat. You also can use Root explorer or adb to rename the apk extension of the bloat to get rid of the eyesore
Sent from my Nexus 7 using Tapatalk
proscan 7" tablet.
you kngoo root, make sure your using windows...anything past vista.
i used wkindows 7 or 8 from an internet cafe and my proscan is plt7602g and it worked fine...i even reset from the android service menu (green dead dude) and it worked but make sure most of all that you have the verify apps off so you can root it. because it will still be a danger to ur tablet. there is always a bricking chance, one you instakll kingoo root and run the program plug in ur tablet press root and the app takes care of it all. and if you google kingoo app or kingoo root it will show a main website and go from there
i got my proscan PLT1077G and i haven't found a **** yet i want to change my tablet android OS but don't have a developer who can help us with this one i think proscan is not that popular
Tearran said:
The tablet is semi rooted out of the box it only needs supersu (http://forum.xda-developers.com/showthread.php?t=1538053). You need to adb push this file.
[HOW-TO] Install & Use ADB tool (http://forum.xda-developers.com/showthread.php?t=1474956)
How to push files through ADB (http://forum.xda-developers.com/showthread.php?t=642437)
Basic adb/shell commands for noobs (http://forum.xda-developers.com/showthread.php?p=3820215)
Click to expand...
Click to collapse
Going to try this on the PLT7650G
Need firmware file for plt7223g
prepaidguy9081 said:
Going to try this on the PLT7650G
Click to expand...
Click to collapse
so much for this method - I used kingo root for windows, slow but works. just go grab a beer and come back in ten.