[Q] Help about My HTC 7 Mozart. Read inside - 7 Mozart General

I got my device from singapore its from starhub and its 1 yr old already.
from stock rom it already have a problem with sliding the lockscreen and after sliding it hangs. when calling too long when it turn black it hangs need to restart by removing the batery.
last oct 3 i updated my phone via force update and still theres a problem on lock screen but the unresponsive after unlocks is occurring less after the update. i found some problems like the speech command not working. it take me 5-10 slide to unlock the phone.
phone info after the update
OS ver : 7.10.7720.68
firmware revise num: 225.21.40600.728
hardware revise num: 0004
radio software ver : 5.69.09.05a_22.50.50.21U
radio hardware ver: A.102.0.D4
Bootloader ver: 4.6.225.0(129193)
Chip SOC ver: 2.2.5.0
HOPING for ANSWERS FROM PEOPLE here who know or experienced it THX

Hope HTC do something with these issues, via ROM update...maybe.
For now, I use the right side of the screen - slide bottom to top to unlock the screen without fail. If I happen to touch other part of the screen first... it will lag badly.

why mine is on the left side or sometimes i use camera but there possibility to hang after that

Related

[Q] Nexus One Restart Problem

Problem: the nexus one phone which I bought re-starts when used after like 10-20 minutes. Then, it keeps on restarting for 6 times until it hangs at the four colored cross symbol.
I have to take out the battery for half an hour and then restart the phone again
Initial Configuration received was Android 2.2 with build version FRF 91 with radio 5.08
I unlocked the bootloader and then tried to change the OS to Android 2.2.1 FRG 83 with the final configuration:
Baseband Version: 32.41.00.32U_5.08.00.04
Kernel Version: 2.6.32.9-27240-gbca5320android-build
Build Number: FRG83
but nothing changed..
Can somebody help me in getting this phone working?
what to change now? Should i change the radio version and put a lower version of Android 2.2 to make it work?
Thanks
-Chirag

HTC Mozart 7 : Available update: HTC Update for Windows Phone (from 7.0.7392)

I have a HTC Mozart 7, ROM Asia, jailbreak with chevronwp7, and upgraded sd-card to 32 GB, used in Thailand, and updated to the last 7.0.7392. Today, 23/07/2011, when I pluged it into my PC and run the Zune. it's ask me for update from HTC. After, I finished the update, my firmware still be 7.0.7392. I can't see anything different from the previous usage. But, I can notice that the change is concern about version of software for HTC itself in settings->about menu.
Before:
Firmware revision number: 2250.09.12902.707
Radio software version: 5.51.09.06_22.30.50.09U
Bootloader version: 1.26.2250.1(111641)
After:
Firmware revision number: 2250.21.13301.707
Radio software version: 5.65.09.25_22.45.50.21U
Bootloader version: 1.33.2250.1(123643)
** and I still can use Tom XAP, Application Deployment, or XAPDeployX to install any .xap file as normal jailbreak as same as before doing the update.
anyone has noticed another changing?
The 7.0.7392 is the WP7 OS version.
These updates have been rolling to several WP7 phones and updates hardware drivers that communicate with the OS itself, improving several general aspects but it does not include any OS update.
Yep. I think so. The Update from HTC is only for update its software/driver version.
has anyone with T-Mobile Germany HTC Mozart original or flashed HTC Europe recieved this yet?
probelm with my new mozart 7
enyone help me..
i have update my mozrt
but want i update its my pc was shutdown
then my mozart can not open..
can you enter to boot loader menu? by pressing volume down (-) and press the power button. (two button togetter, until it open) if you can see the boot loader screen. (colorfull). I think you can find the Mozart ROM and re-flash it again follow your location.
** my effect that I found on my phone **
ixc said:
** my effect that I found on my phone **
Click to expand...
Click to collapse
tq..how can i flash the phone...this update make my phone touch screen
always hang..sorry for bad english.
were can i get sofware for free..

[Q] Improve Start-Up Experience? Titan

Do you know of a way to decrease the time it takes AT&T's TITAN to start-up?
When powering up, I go through three splash (a.k.a. boot) screens:
1) HTC 2) AT&T rethink possible 3)Windows Phone
I would like to speed up how long each of these screens are displayed (or eliminate one or more of them) to say time going from Off to the Lock Screen.
FYI: I'm not a developer and don't have access to Developer Tools
Thanks for Your Time!
Phone: HTC Titan PI39100
OS: Windows Phone 7.5 v. 7.10.7720.68
Firmware Revision No. 1600.2200.11004.502
Hardware Revision No. 0002
Bootloader v. 1.10.160015.3(132409)
Modifications: NONE
Unfortunately we can't do that without having an unlock (I don't know what level of unlock, but certainly higher than a developer unlock). The HTC logo can be overwritten with a flashing tool (but don't try it yet, I don't think any compatible flashing tool has been made yet).
Sit tight! If/when custom ROMs start popping up, the ability to flash over the HTC logo will soon follow.

[Q] 7.10.8112.7 failure. Continually Rebooting. Phone not working

I had a reliable debranded Mozart which has been unlocked by Orange in the UK and was running the ansar rom. It has accepted many updates in the post (post debranding) via Zune.
Unfortunately the 7.10.8112.7 update was problematic with error codes C1010007 and then C101002E.
I am left with a useless phone. I have done a factory reset to no avail.
The phone will boot into wp7.5 and sometimes holds for a few minutes before rebooting. Other times it gets into a loop while booting and ends up vibrating 7 times.
Any ideas anyone?
Is a fresh rom likely to help and if so which one?
I am currently showing:
OS 7.10.8107.79
Firmware 2250.21.51201.401
HW Rev 0004
SPL 5.12.2250.1
Thanks in advance
An Update
I have now dne a successful factory reset. Achieved this by leaving the battery out over night. I have been here before and am pretty sure that I will struggle to apply the above update.
Any suggestions would be appreciated.
desmo992 said:
I had a reliable debranded Mozart which has been unlocked by Orange in the UK and was running the ansar rom. It has accepted many updates in the post (post debranding) via Zune.
Unfortunately the 7.10.8112.7 update was problematic with error codes C1010007 and then C101002E.
I am left with a useless phone. I have done a factory reset to no avail.
The phone will boot into wp7.5 and sometimes holds for a few minutes before rebooting. Other times it gets into a loop while booting and ends up vibrating 7 times.
Any ideas anyone?
Is a fresh rom likely to help and if so which one?
I am currently showing:
OS 7.10.8107.79
Firmware 2250.21.51201.401
HW Rev 0004
SPL 5.12.2250.1
Thanks in advance
Click to expand...
Click to collapse
Like many other Users of that fu**ed Phone !
Iv got 2 of that Mozarts, one with the reboot and second without.
Its a Hardware Problem. Both Phones have the same ROM , changing Batteries ,changing SDCard, no Matter
it stays; the first reboots , the second never...
Update on Rebooting
Here is an update of my rebooting issue:
Following a factory reset (battery left out overnight) the phone is not longer rebooting PROVIDED THAT ID DO NOT CONNECT TO A WIRELESS NETWORK OR ATTEMPT TO APPLY AN UPDATE VAI ZUNE.
I am also able to get into the bootloader (spl5.12.2250.1) and establish a USB connection.
I do not want to mess with rolling back the bootloader as that seems to be a very high risk undertaking.
My suspicion is that a fresh rom installation may sort the problem as it only appeared after applying an update.
So can anyone suggest options for updating to a new reliable rom which will not consume excessive battery life - or at least point me in the right direction for one which is compatible with my current spl.
Thanks in advance.
Mike
desmo992 said:
Here is an update of my rebooting issue:
Following a factory reset (battery left out overnight) the phone is not longer rebooting PROVIDED THAT ID DO NOT CONNECT TO A WIRELESS NETWORK OR ATTEMPT TO APPLY AN UPDATE VAI ZUNE.
I am also able to get into the bootloader (spl5.12.2250.1) and establish a USB connection.
I do not want to mess with rolling back the bootloader as that seems to be a very high risk undertaking.
My suspicion is that a fresh rom installation may sort the problem as it only appeared after applying an update.
So can anyone suggest options for updating to a new reliable rom which will not consume excessive battery life - or at least point me in the right direction for one which is compatible with my current spl.
Thanks in advance.
Mike
Click to expand...
Click to collapse
Dear,
It seems that during update you phone might have low battery or update is interrupted.
You can install offical rom containing 201 search in file factory.
Otherwise go with the below, but you will need to downgrade your spl which is a lengthy process.
http://forum.xda-developers.com/showthread.php?t=1837393
Update to my last update
Thanks for your reply adeebulrehman
1. In your opinion, what are the merits of each of the two roms you suggest?
2. Can you suggest where I download the official rom safely?
3. Can you point me in the right direction for some safe and reliable spl downgrade instructions?
Many thanks
Mike
Karlitos
HI am new to this site and pls i want an advice on what to do on my htc hd7 WM 7.5 (upgraded yesterday)
well since i add the phone had problem with an error msg dat says (couldnt connect with my phone) when ever i sign in into my window live account.
secondly i was able to use same account id to sign in on my computer to download games and application but dnt know how to transfer dem to my phone...............
lastly i wish to switch to install android on my HTC hd7 as i did to my htc hd2..............but seems der is no hack to that.
below is the spec of my phone
name: karlitos
model: HTC HD T9292
software: win 7.5
total storage 14.64gb
available: 13.56gb
os version: 7.10.7740.16
firmware version no.: 2250.21.51004.401
hardware version no.: 0002
radio software version: 5.71.09.02a_22.51.50.21U
radio hardware version: A.102.0.D4
bootloader version: 5.10.2250.0(132968)
chip Soc version: 2.2.5.0
thanks ...................
desmo992 said:
Thanks for your reply adeebulrehman
1. In your opinion, what are the merits of each of the two roms you suggest?
2. Can you suggest where I download the official rom safely?
3. Can you point me in the right direction for some safe and reliable spl downgrade instructions?
Many thanks
Mike
Click to expand...
Click to collapse
Dear,
Just Search Mozart Shipped Rom That matches your firmware revision number last 3 number of third section.
2250.21.40600.061
For downgrading SPL there are details post of our Forum Moderators kindly read. All these are safe method unless you make a mistake

[Q] Xperia X10 Mini Pro nearly dead

Hi,
I have got a broken U20i which i want to repair, if possible.
Do not know anything about the history of the phone and what has caused the damage.
The led does not work, when it is started it comes a short vibration and afterwards for several seconds the backlight of the display.
The backlight returns every 20 seconds, and it seems that the accu is charged - that is all it does.
With SEUS and PC Companion updates are possible without any problems.
S1 Tool lists:
27.05.2013 16:46:31 RUNNING S1_EROM VER "R8A029"
27.05.2013 16:46:31 SOFTWARE AID: 0001
27.05.2013 16:46:31 LOADER AID: 0001
27.05.2013 16:46:33 FLASH ID: "002C/00BC"
27.05.2013 16:46:33 LOADER VERSION: "R4A045"
27.05.2013 16:46:33
27.05.2013 16:46:33 MODEL (from GDFS): U20i
27.05.2013 16:46:33 SOFTWARE VERSION: 1235-3411_2.1.1.A.0.28
27.05.2013 16:46:33 CUSTOM VERSION: 1245-6257_R9B
27.05.2013 16:46:33 FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.28
27.05.2013 16:46:33 SERIAL NO: CB*******B
27.05.2013 16:46:33
27.05.2013 16:46:33 SEMC SIMLOCK CERTIFICATE
It was possible to unlock the bootloader and to flash the kernel with Flashtool and to set it back to fabricmode with SEUS.
After each procedure the phone does not start.
I tested the touchscreen and the display - both are working.
Is there anything to do exept jtag?
kadodo said:
Hi,
I have got a broken U20i which i want to repair, if possible.
Do not know anything about the history of the phone and what has caused the damage.
The led does not work, when it is started it comes a short vibration and afterwards for several seconds the backlight of the display.
The backlight returns every 20 seconds, and it seems that the accu is charged - that is all it does.
...
It was possible to unlock the bootloader and to flash the kernel with Flashtool and to set it back to fabricmode with SEUS.
After each procedure the phone does not start.
I tested the touchscreen and the display - both are working.
Is there anything to do exept jtag?
Click to expand...
Click to collapse
I don't think a jtag will do you any good since flashing kernels and firmware seems to work fine, and all a JTAG does is force the phone to accept factory firmware, something you have already done with seus.
The little vibration is the standard indicator that the phone is turning on and you can release the power-button, so that's normal too.
I guess there is a hardware fault somewhere. It may be something very simple like the flex that connects the screen to the rest of the phone (the motherboard and battery etc. is all underneath the keyboard on the u20) and it is the most common cause of failure on that phone. If you can see visible damage to that then that would be my first port of call.
But I can't guarantee that that will fix the problems the phone has. I wish you good luck with it though, I love these little phones and there's nothing else like it on the market.
Thanks for your answer.
The flexcable is broken.
Now I have changed the flexcable and the u20i nearly works fine.
During the repair I disabled the wlan-antenna.
Can anybody tell me (or even better show me) where I can find this antenna?

Categories

Resources