When I boot up into recovery, I can never get my external sd card to mount properly. I can select it but it just goes back to the internal sd card directory as if there's nothing there. I had this issue on my Infuse as well but that had the stock Samsung 2GB sd card in it, I've got an 8GB card now from Patriot. I've formatted it with SDFormatter with no luck.
Does CWM simply not allow you to load your recovery (nandroid) backup files from the external, or ROM installation files, etc.?
Bump... me neither!
chi641 said:
Bump... me neither!
Click to expand...
Click to collapse
I figured out my issue after the fact and forgot about this thread.
I kept thinking that I needed to mount the /emmc to load a .zip but I found out that when I go to load a file, I needed to pick 'choose zip from internal sdcard' at the bottom which actually is not the internal card, but the external sdcard. Yeah that confused me. I can now get into it that way, hopefully you can too.
Also, make sure you only use the Home and Back Arrow softkeys to navigate CWM as this was causing me some issues using the Power key like I was used to.
Related
as soon as I use power to select "/sd" it flashes me back into the same directory tree like I didn't select it at all. Am I missing something obvious?
try using the back softkey as your select button
/sd is your ext sd card, roms should be installed from /sdcard (internal).
If you have it in the correct place, perhaps you are not scrolling to the very bottom of the list in cw recovery when you are selecting your file to flash.
s15274n said:
/sd is your ext sd card, roms should be installed from /sdcard (internal).
If you have it in the correct place, perhaps you are not scrolling to the very bottom of the list in cw recovery when you are selecting your file to flash.
Click to expand...
Click to collapse
Are you saying I should put the rom in the main memory (lacking proper term here) of my phone instead of the "external" removable sdcard?
move the rom .zip file to the root of sdcard/ (this is the internal memory). If you are putting it at sdcard/sd, this is your external memory and is not correct.
s15274n said:
move the rom .zip file to the root of sdcard/ (this is the internal memory). If you are putting it at sdcard/sd, this is your external memory and is not correct.
Click to expand...
Click to collapse
Yay thanks
So what rom are you running now?
So i seem to have hit a wall here when trying to get a new Whiskey rom... Currently running standard bonix, but looking to get a bit better battery life. Here is the issue.
When I get into clockwork recovery, And I go to install from SD card.... It actually shows the internal memory, and has a folder called "SD" but for some reason it never allows me to select it. It just goes back to the main folder. The log shows its trying to load it from /sdcard/sd... seems like its a mounting issue?
Of course my first attempt trying to install not realizing it was internal had write errors, but luckly I FOLLOWED INSTRUCTIONS and got to restore a backup.
Anybody seen this issue or can advise on how to correct it?
Update: just confirmed the issue is infact that Clockwork is mounting the internal storage as the SD Card. Removed the SD card, still getting the same results. Unmounting SD card only results in error msg.
bump.... still looking for suggestions
I don't follow, is the.zip on the internal sdcard/ root (no folder)?
Not sure why your sd card would be involved. What am I missing?
perhaps I am confusing terminology? Is 'sdcard/ root' not the same as the SD Card?
No, root means not in a folder. If your zip is not pasted to sdcard/ that is likely the problem.
Ahh gotcha. I understood concept of root folder, but I missread sdcard/ to be the Expandable SD Card, which it was in the root folder of.
:O *Facepalm*
So I recently Romed my Viewsonic G Tablet.
I followed this guide.
http://forum.xda-developers.com/showthread.php?t=865245
Everything is fine..except when I put a SD card into the SD slot the Tablet doesn't recognize it. It just tells the the internal Space not the SD card space.
I used ZPad Clean v3.0 for the ROM and I used cwmod_internal.zip instead of cwmod_microsd.zip
I then used my friend's G Tablet and put the SD card in it..It read it just fine.
So I wanted to test it out while it was rooted. (to double check)
I then Rooted my friends GTablet also. I rooted it the same way but the only change I did was have a SD card in the tablet the whole time. Still the same problem.
Is there any way to fix it? DO i need to use cwmod_microsd.zip....instead of cwmod_internal.zip??
I'm really confused if someone can help me that would be amazing!
Is there an APP that tells you the storage of your installed SD Cards?
Thank you
You mean flashed the rom when you say romed. Have you checked to make sure the sdcard is getting mounted? If there is no data on it you might try reformatting it in either of the g tabs. If you can get to a shell you might reboot, and look at the last 20 lines or so of dmesg. Insert the card and take another look at dmesg and see if the kernel is picking up the insert at all. If so it is likely just a mounting issue.
muqali said:
You mean flashed the rom when you say romed. Have you checked to make sure the sdcard is getting mounted? If there is no data on it you might try reformatting it in either of the g tabs. If you can get to a shell you might reboot, and look at the last 20 lines or so of dmesg. Insert the card and take another look at dmesg and see if the kernel is picking up the insert at all. If so it is likely just a mounting issue.
Click to expand...
Click to collapse
Well I reformatted it and I mounted it. Still nothing..How can I check if the kernel is picking up the SD card at all?
Would changing Kernel's fix the problem? I'm just using the Stock Kernel that the ROM came with.
Thanks
You were able to reformat and mount it via the g tablet with the zpad software on it? And even having done that it doesn't list it as having any free space?
muqali said:
You were able to reformat and mount it via the g tablet with the zpad software on it? And even having done that it doesn't list it as having any free space?
Click to expand...
Click to collapse
Not yet. So should I go to Storage and devices and unmount and format the SD card via the tab?
Try it on the tablet.
If I reformat the SD card wouldn't I loose the root? or no right because I did external
My understanding of root is that it modifies files on your tab/phone, not an external sd card. Worst case you lose root and reroot the device.
muqali said:
Try it on the tablet.
Click to expand...
Click to collapse
steveojp said:
Not yet. So should I go to Storage and devices and unmount and format the SD card via the tab?
Click to expand...
Click to collapse
When I tap click mount it says 11.3 gigs available.
when i unmount it says unavailable.
The card is only 8GB.
It should be internal storage 16GB.
SD card like 8gb.
Not sure what's going on.
If I format I think I'll wipe it all.
Ok, there is an internal 16GB, yes. Of which you have 11GB free. The SD card you're having the issue with is a separate uSD 8GB, right?
I'm meaning for you to try to mount/unmount or possibly format the 8GB SD card. If it isn't showing at all then the issue is something beyond it simply not being mounted.
muqali said:
Ok, there is an internal 16GB, yes. Of which you have 11GB free. The SD card you're having the issue with is a separate uSD 8GB, right?
I'm meaning for you to try to mount/unmount or possibly format the 8GB SD card. If it isn't showing at all then the issue is something beyond it simply not being mounted.
Click to expand...
Click to collapse
Yeah. It's a separate card that I plugged into it.
Was there ever a fix/resolution for this? I am having the same issue.
Everyone,
I've written this a bunch of times -- but here's one more:
/sdcard -- internal memory of the tablet
/sdcard2 -- miniSD card in the external slot
/usbdisk -- USB key slot
Put your recovery folder and update.zip on /sdcard, turn off the tablet, the press power
and volume + to initiate standard recovery.
Second, put your recovery folder and update.zip on a miniSD card. Edit the command file
in the recovery folder with Notepad to change the location from /sdcard to /sdcard2 and
save it with the name "command" (NO .txt or other file extension). Then boot
recovery with power/volume + and the OS will use the sdcard (assuming you don't
have a live recovery/update.zip file in /sdcard).
Third, if you can boot recovery to CWM but can get your ROM to work, go in recovery to
the mount menu and go down to the mount USB memory option and choose it.
Then plug your connector cable from the miniSB port to your PC. When you plug into
your PC an Explorer window should open and you should have a drive letter representing
the G-Tablet (it's G: on mine) on you menu. You now can select that
letter and you have access to your tablet memory (/sdcard). I've even had a time or two
when not a single file showed!!! I added update.zip and recovery and loaded
a ROM!
The tablet boot process apparently checks /SDCARD. If it doesn't find a recovery files there
it does the same check if you have a miniSD external card installed. The large USB slot is not
useable for booting or recovery so far as I have determined or read.
I hope this helps you.
Rev
I own a visio tablet which I rooted with vegan and clockwork. I have a 32GB SD card but when I check the storage is says 12GB on SD and 2GB on internal. The tablet should have 16GB + my 32GB. Anyone have an idea why it wont come up?
Is the fix above the best way to take care of this issue?
Can anyone kindly help? I've read through a lot of the links and can't find anything. I have rooted my device with clockworm v8, Vegan, got the market place to work and now I just need to figure out what is going on with my 32GB SD card. Should I format it with FAT32? How can I get it to be recognized?
Thanks in advance!
Formatting to Fat32 would be a good start ;-)
SD Card Dilemma
I have the VEGAn-TAB-v1.0.0B5.1 installed in my G-Tab and, with the exception of the SD card issue, things are just peachy! I've read the entire thread but, even with butchconners description, I seem to still be missing something. Let me try to structure this a bit differently...
1. The sdcard2 DOES show up in ifilemanager (with only one file, LOST.DIR) but NOT in SETTINGS. Since it does not appear in SETTINGS, there is no way to mount or dismount it (although if it shows up in the file manager and I can see the file on it, one might infer that it is already mounted.)
2. Even though I can see it in ifilemanager, I'm not so sure how I can actually USE it. It seems to me that the system would need to know (via SETTINGS) that it is there and I would have to tell the system where to put my files (i.e., sdcard or sdcard2).
3. When I connect my G-Tab to my Win7 PC, I only have access to sdcard AND NOT sdcard2. This seems a bit unusual since I have always had access to the removable sd card AND NOT the system memory on all my other devices (EVO, Blackberry, etc.)
My goal is to be able to set applications (some or all) to use the sdcard2 (at least for data) and be able to access it via the usb connection to my PC. Does anyone know how to accomplish this?...Has a solution for this already been posted somewhere?
Many thanks.
I am not an expert but the pc sees(?) only sdcard(internal) but no sdcard2(microsd).
Right, Guys?
I am now able to see both sdcard1 and sdcard2 using pershoots latest oc kernal released 4/25 when hooking up gtab via usb to computer. I am using Vegan tab gingeredition.
where does one find that kernel and how do i install it? Im running vegan ginger right nowand have the same sd card issue.
thanks!
I am trying to create an sd-ext partiton so I can move applications and backup to that partition on my 4GB external SD card.
I've got ROM Manager 4.8.0.8 but when I select Partiton SD card it reboots and tries to reformat but I don't see anything on the Card just a LOST.DIR folder. I can't read the system messages when in Recovery mode cos it all happens so fast.
I tried via ADB and booted into recovery and selected the option to partition manually but still nothing. I reformatted the card with FAT32. Nothing.
Am I doing something wrong?
Just throwing something out there. Try rebooting into Clockwork Recovery. In CWR, go to Advanced -> Partition SD Card -> Select the size. If it doesn't work, it shouldn't reboot your device (If I remember correctly). Take a look at the log (Advanced -> Show log).
Hopefully this helps a bit.
Hmmm he's right,you have to flash cwm first.
If your device is not listed in rom manager,find cwm for your device on xda and connect your device to the pc in fastboot mode,extract the zip and copy recovery.zip to the folder where fastboot on your pc is and give the command:
fastboot flash recovery recovery.img
after flashing cwm,do as suggested
Also,you can partition it by downloading Easeus partition manager on your pc and choose the ext2 partition as the second one and a size of 512 mb is enough in most cases
go into CWM and select advanced thn move onto partition SD card
it would ask u how much space to partition after that select swap size as 642 or above and wait for few minutes.... remember tot ake a backup of ur SD card as all the data would be cleared while partitioning
Thanks. The first problem was that the latest version of ClockworkMod Recovery 4.2 doesn't see my external SD card. No idea why. I used the 3.2 version which does see the external card and formatted the card first (after backing up!!). Then Advanced Partition SD card but I get a message saying : "Too many people have bricked their devices by doing this. Therefore this feature has been disabled."
I tried another Recovery Manager - Rogue Recovery and that showed messages saying it was formatting. I rebooted but when I looked at the SD card - nothing. However, I downloaded Easeus partition manager (looks good) and it showed that there is an sd-ext with a lost+found folder in it.
Is that normal? If yes then why didn't someone say that it would be invisible?!! If not, what happened?
Seems there are problems with the SD card. When I try to point TitaniumBackup to my SD card it sees the folders as Read Only. http://code.google.com/p/android/issues/detail?id=18559 and http://code.google.com/p/android/issues/detail?id=18501. It was obviously a bit silly to call internal storage the same name as an external SD card. HD as in hard drive (I know its not) would be better. Or just Storage or whatever. NO doubt people have been accidentally formatting their internal memory instead of the card and that's why it was disabled in Clockwork Recovery. And by the way I'm using the hacked Android 4 - so the problem is still there even in 4 (Ice Cream)
The easiest way to get sd card partitioned is using Mini Partition Tool on PC.
Dikirim dari WT19i gue pake xda premium
Now does cwm also do the ext partition? and if not what program would work well I have a 2gb sd card for my samsung admire and I want to make a ext partition so i can move some more files to it.And later get larger card up to 16gb and do the same.
Thanks,
Doug
Hi. Noob Android user here
So. I turned on usb storage and formatted the sd card from windows. I copied some files onto it and after i turned off usb storage it said "SD card is safe to remove" and i don't seem to be able to mount it back.
Thank you.
BobbyLoblaw said:
Hi. Noob Android user here
So. I turned on usb storage and formatted the sd card from windows. I copied some files onto it and after i turned off usb storage it said "SD card is safe to remove" and i don't seem to be able to mount it back.
Thank you.
Click to expand...
Click to collapse
try to format it thru phone
Tried that a couple of time and it didn't work. After a couple of reboots it worked now. Thanks.
Still got a question though.
What are the correct settings for formatting the sd card from windows?
Is it necessary to partition it from CWM? What are the correct setting for this?
LE: Ok. I got myself deeper in trouble. I managed to format the sd card from CWM. I mounted the sd card and copied update-cm-7.2.0-RC1-p500-signed.zip over. I wiped the phone's memory and tried to install CM7 and got the following error: "E: Can't open /sdcard/update-cm-7.2.0-RC1-p500-signed.zip (bad)". I also tried with update-oxygen-2.3.2-LGP500-KANG-signed_v2.6.zip but doesn't work either.
I was thinking of trying to partition the sd card from CWM but i'm afraid i will make it unable to mount back again and this time i got no android to format it from.
Also it seems that formatting the sd card from cwm doesn't really work. The files are still there though it says that it completed.
LE2: I managed to mount sd card from cwm and copied over a cwm backup folder i had in my computer. Takes a while to copy it like it really does something. But after i try to restore or remount usb storage the files aren't there anymore.
can you tell me why do you want to patition your sd card? do you want to create second partition (sd-ext) or what?
BobbyLoblaw said:
Tried that a couple of time and it didn't work. After a couple of reboots it worked now. Thanks.
Still got a question though.
What are the correct settings for formatting the sd card from windows?
Is it necessary to partition it from CWM? What are the correct setting for this?
LE: Ok. I got myself deeper in trouble. I managed to format the sd card from CWM. I mounted the sd card and copied update-cm-7.2.0-RC1-p500-signed.zip over. I wiped the phone's memory and tried to install CM7 and got the following error: "E: Can't open /sdcard/update-cm-7.2.0-RC1-p500-signed.zip (bad)". I also tried with update-oxygen-2.3.2-LGP500-KANG-signed_v2.6.zip but doesn't work either.
I was thinking of trying to partition the sd card from CWM but i'm afraid i will make it unable to mount back again and this time i got no android to format it from.
Also it seems that formatting the sd card from cwm doesn't really work. The files are still there though it says that it completed.
LE2: I managed to mount sd card from cwm and copied over a cwm backup folder i had in my computer. Takes a while to copy it like it really does something. But after i try to restore or remount usb storage the files aren't there anymore.
Click to expand...
Click to collapse
Just format your SDCARD from SETTINGS - STORAGE, after that proceed with the instalation of CM7 or whatever you want. Don't partition your SDCARD if you don't know how to do that and if you don't need partitioned SDCARD. It is not necessary to do that if you don't use an APPS2SD app, so don't waste your time with that.