I'm using the InParisv4 Rom. Is anyone using SetCPU with this? If so, what overclock setting is working for you?
If you want to overclock, you need an overclockable kernel. Paris v4 uses the stock kernel. Flash Pershoot's kernel and you'll be able to overclock to 1.4ghz.
Don't forget the "thanks" button if this helps you.
Thank you! I already flashed Pershoot's kernel over that ROM. Was just afraid to overclock too high and then cause performance issues with my tab. But I will go on ahead and overclock to 1.4. Thanks slack.. will click the 'thanks' button right now! And please.. if anyone is aware of a reason why I should NOT do this, please advise
Please use the Q&A Forum for questions Thanks
Moving to Q&A
My tab runs perfectly stable at 1.4 ghz. If you have trouble just clock back down.
Sent from my DROID2 using XDA App
Thanks FillTheVoid... so just to be sure, do I just set the Min and Max to 1.4ghz?
seanmack said:
Thanks FillTheVoid... so just to be sure, do I just set the Min and Max to 1.4ghz?
Click to expand...
Click to collapse
set the max to 1.4 but leave the min on the lowest setting.
I just installed In Paris v4 ROM into my tab, and flashed pershoot's kernel. However when I go into SetCPU, the max is still only 1.0Mhz. Could I have used the wrong kernel? I used the TW UX one.
mrhazey said:
I just installed In Paris v4 ROM into my tab, and flashed pershoot's kernel. However when I go into SetCPU, the max is still only 1.0Mhz. Could I have used the wrong kernel? I used the TW UX one.
Click to expand...
Click to collapse
Did setcpu ask for SU permissions? If not, go and open up superuser quickly and try again.
Don't forget to click thanks if this helped you!
DaAwesome1 said:
Did setcpu ask for SU permissions? If not, go and open up superuser quickly and try again.
Don't forget to click thanks if this helped you!
Click to expand...
Click to collapse
It was set for permissions. I just reinstalled SetCPU and then it worked right away, weird. Thanks though!
Is setcpu free? If so where can I find it?
its a paid app, but its free for xda members. just search for setcpu 2.2.4 and it should come up.
edit: found it for you:
http://forum.xda-developers.com/showthread.php?t=505419
Thank you for that Jager555
I prefer interactive cpu governor over ondemand.
Related
hi
start off by saying im a noooooob BUT have finally rooted, installed [X.Gbread for 2.1 Official ROM] from SEMPITERNAL, also Junk Apps Clean up + Xrecovery + Jit V2 Optimized.
running very smooth!!!! check quadrant score!!!
I now want to know if i can overclock the cpu to get even higher score and if i can how do i do it????
i cant seem to find any threads containg x10 cpu overclock
thanks
Leon
Don't know if its correct. Wouldn't we need the bootloader cracked to do so? xD
Sighx said:
Don't know if its correct. Wouldn't we need the bootloader cracked to do so? xD
Click to expand...
Click to collapse
i have no idea, like i said im a complete nooob, but thanks!!!
There's a app on the Android Market called SetCPU, that should allow you to overclock your X10.
doesn't work.. at least not for me anyway. overclocking depends on your kernel, and so far I haven't found any custom kernels
cruzin_cruzing said:
There's a app on the Android Market called SetCPU, that should allow you to overclock your X10.
Click to expand...
Click to collapse
That's retarded. SETCPU lets you select you frequency, it doesn't overclock...
Sent from my SAMSUNG-SGH-I897 using XDA App
Its amazing how many people ask this... And you would have your answer if you used your brain and used the search box...
You can not currently overclock the CPU in the X10
Once the bootloader has been cracked and we can flash custom kernels that allow overclocking, then you can
Seansmit17 said:
Its amazing how many people ask this... And you would have your answer if you used your brain and used the search box...
You can not currently overclock the CPU in the X10
Once the bootloader has been cracked and we can flash custom kernels that allow overclocking, then you can
Click to expand...
Click to collapse
thanks looks like i'll have to wait untill then.......
not dev related, moved to q&a
also closed as answered
Hello Everyone,
I just flashed my G-Tablet with CM7 Harmony 7.0.2. I want to overclock this rom. I am currently at 1709 using quadrant scores. Please let me know a step by step on how to overclock this rom. Thank you in advance.- Jerome
Easy.
If I'm not mistaken, CM 7.02 has an earlier version of Pershoot's overclock kernel (though you will want to upgrade to his latest dated 4/30/11).
Hit your menu button, go to Settings, go to Cyanogenmod Settings, go to Performance, click "ok", go to CPU Settings.
Leave Governors alone
Leave Min CPU frequency at 216 Mhz
Set Max CPU Frequency to 1200 Mhz or 1400 Mhz
That's it. Play around, if everything works well, no force closes or lockups, go back in and check Set on boot.
Done.
Hello...thank you for your reply
tcrews said:
Easy.
If I'm not mistaken, CM 7.02 has an earlier version of Pershoot's overclock kernel (though you will want to upgrade to his latest dated 4/30/11).
Hit your menu button, go to Settings, go to Cyanogenmod Settings, go to Performance, click "ok", go to CPU Settings.
Leave Governors alone
Leave Min CPU frequency at 216 Mhz
Set Max CPU Frequency to 1200 Mhz or 1400 Mhz
That's it. Play around, if everything works well, no force closes or lockups, go back in and check Set on boot.
Done.
Click to expand...
Click to collapse
Thank you very much...but how do you upgrade the kernel though?
Easiest way is to use the latest nightly from CM7, it has latest pershoots kernel pre-installed.
If you need to do it manually, follow his thread on the dev section, you can't miss it.
RE: Dev Section
aasoror said:
Easiest way is to use the latest nightly from CM7, it has latest pershoots kernel pre-installed.
If you need to do it manually, follow his thread on the dev section, you can't miss it.
Click to expand...
Click to collapse
Ok great thanks...wow such quick responses...happy to be here with the helpful people...now if only the whole world works like this...we'd be living in harmony!!! - Jerome
I'm using πCrust rom (3.14) and almost everytime I restart my device, I loss all my widget on my homes screens (not shortcut).
Anyone have an idea how can I fix it?
Notes:
I'm using blur.
It's a bell atrix.
Sent from my MB860 using XDA App
You using faux123's OC kernel? I used his and it made my widgets disappear upon reboot on certain versions. Version 0.13 works for me though.
Try to fix permissions on advanced tab in CWM.
Its fauxs kernel. Flash to stock or a different kernel.
Thx everyone
I will try to install another kernel.
Gabuuzz said:
Thx everyone
I will try to install another kernel.
Click to expand...
Click to collapse
^About that^
I'm running Faux's Kernel and am thus experiencing the same problem...
If I were to install a different kernel, are there any (besides Faux's) that are compatible with Nottach's Darkside ROM?
Kholk's, perhaps, or others?
Or is the only stable option to just flash a different non-widget-killing version of Faux's kernel?
xyrovice said:
^About that^
Or is the only stable option to just flash a different non-widget-killing version of Faux's kernel?
Click to expand...
Click to collapse
Try to intall fauxs 0.1.9.
Problem was solved for me on this version.
moorzel said:
Try to intall fauxs 0.1.9.
Problem was solved for me on this version.
Click to expand...
Click to collapse
0.1.9?
I thought the most recent was .7?
Clarification, por favor?
Thanks for the tip, though.
http://rootzwiki.com/showthread.php...Unified-v0.1.9)OC-1.3GHz-SLQB-BFQ-EXT4-Aug-27
ofek said:
http://rootzwiki.com/showthread.php...Unified-v0.1.9)OC-1.3GHz-SLQB-BFQ-EXT4-Aug-27
Click to expand...
Click to collapse
KIck arse.
Thank you bro.
I've installed the Kholk's OC kernel and its seem to fix the problem.
If I lost my widget again I inform you.
Thank you!
I'm currently using the 1.9 kernel by faux and I lose my widgets on reboot...
Kholk's kernel work fine for me.
Fix permissions through Rom Manager. This is the one which works.
Delete widgets
Open Rom Manager
Fix Permissions
Reboot
Setup widgets
Assimilated via WinBorg 4G
i have done some research on the missing widgets on boot. it seems that if i leave the cpu frequency at 1100 mhz and cold boot the widgets stay but when i move the frequency to 1300 mhz and cold boot they disappearing. not sure why just an observation.
CaelanT said:
Fix permissions through Rom Manager. This is the one which works.
Delete widgets
Open Rom Manager
Fix Permissions
Reboot
Setup widgets
Assimilated via WinBorg 4G
Click to expand...
Click to collapse
I've reinstall faux123's kernel and this method seem to work.
Thank you!
i recently decided to install faux's newest kernel and im getting a slightly different problem. Instead of the widgets just not appearing at all they say problem loading widgets. this is using launcher pro.
Have had this problem a lot. Solved with faux's 0.1.7.
Hi
Have a rooted and would like to use the CPU app to tweak for better phone life.....remember someone put some instructions on setting up but can't find that posting.
Thanks in advance
sr
steve16 said:
Hi
Have a rooted and would like to use the CPU app to tweak for better phone life.....remember someone put some instructions on setting up but can't find that posting.
Thanks in advance
sr
Click to expand...
Click to collapse
Just rooting is not enough if you want to use SetCPU app. You need a kernel that supports overclocking/undervolting, something like this: http://forum.xda-developers.com/showthread.php?t=1252301
this can overclock with a stock kernel with root
http://forum.xda-developers.com/showthread.php?t=1101355
Would these do ?
Hi
Have a rooted and would like to use the CPU app to tweak for better phone life.....remember someone put some instructions on setting up but can't find that posting.
Thanks in advance
sr
Thanks, running on Kernal Version speedmod s2-k1-t39
Rom CriskeloRom version 18
So, I've upgraded my Siyah Kernel to the latest version and set the CPU UNDERVOLTING to -100mV(default is -No Undervolting), governor to lulzactiveq, max frequency to 1.6(default is 1.4) and voltage control to 1325000 uV (default is 1350000)
Is this safe ? No crashes so far.
Yes there is no problem..,..
Read siyah kernels information its very helpful to you.....
If you face some sort of problems go to siyah setting and hit on default setting.....
Sent from my GT-I9300
Here is screenshots for you.....
Reset setting for default.......
Sent from my GT-I9300
rockondudu said:
Yes there is no problem..,...
If you face some sort of problems go to siyah setting and hit on default setting.....
Sent from my GT-I9300
Click to expand...
Click to collapse
I just had a freezae and needed to remove the battery to reboot it again. Advice of going one step lower to 1.5 ? or increase a few voltage @ 1.6?
is 1400000 good for 1.6?
rockondudu said:
Here is screenshots for you.....
Reset setting for default.......
Sent from my GT-I9300
Click to expand...
Click to collapse
Thanks for the screenshot
P.S : I think the problem is my rom, because its freezing, except for 1.5(stable). Rom is OMEGA 33.3
Well i rebooted my s3 , 1.6 oc and voltage control to default and uv @ -100mV. Its stable. Stay with this?