I'm using πCrust rom (3.14) and almost everytime I restart my device, I loss all my widget on my homes screens (not shortcut).
Anyone have an idea how can I fix it?
Notes:
I'm using blur.
It's a bell atrix.
Sent from my MB860 using XDA App
You using faux123's OC kernel? I used his and it made my widgets disappear upon reboot on certain versions. Version 0.13 works for me though.
Try to fix permissions on advanced tab in CWM.
Its fauxs kernel. Flash to stock or a different kernel.
Thx everyone
I will try to install another kernel.
Gabuuzz said:
Thx everyone
I will try to install another kernel.
Click to expand...
Click to collapse
^About that^
I'm running Faux's Kernel and am thus experiencing the same problem...
If I were to install a different kernel, are there any (besides Faux's) that are compatible with Nottach's Darkside ROM?
Kholk's, perhaps, or others?
Or is the only stable option to just flash a different non-widget-killing version of Faux's kernel?
xyrovice said:
^About that^
Or is the only stable option to just flash a different non-widget-killing version of Faux's kernel?
Click to expand...
Click to collapse
Try to intall fauxs 0.1.9.
Problem was solved for me on this version.
moorzel said:
Try to intall fauxs 0.1.9.
Problem was solved for me on this version.
Click to expand...
Click to collapse
0.1.9?
I thought the most recent was .7?
Clarification, por favor?
Thanks for the tip, though.
http://rootzwiki.com/showthread.php...Unified-v0.1.9)OC-1.3GHz-SLQB-BFQ-EXT4-Aug-27
ofek said:
http://rootzwiki.com/showthread.php...Unified-v0.1.9)OC-1.3GHz-SLQB-BFQ-EXT4-Aug-27
Click to expand...
Click to collapse
KIck arse.
Thank you bro.
I've installed the Kholk's OC kernel and its seem to fix the problem.
If I lost my widget again I inform you.
Thank you!
I'm currently using the 1.9 kernel by faux and I lose my widgets on reboot...
Kholk's kernel work fine for me.
Fix permissions through Rom Manager. This is the one which works.
Delete widgets
Open Rom Manager
Fix Permissions
Reboot
Setup widgets
Assimilated via WinBorg 4G
i have done some research on the missing widgets on boot. it seems that if i leave the cpu frequency at 1100 mhz and cold boot the widgets stay but when i move the frequency to 1300 mhz and cold boot they disappearing. not sure why just an observation.
CaelanT said:
Fix permissions through Rom Manager. This is the one which works.
Delete widgets
Open Rom Manager
Fix Permissions
Reboot
Setup widgets
Assimilated via WinBorg 4G
Click to expand...
Click to collapse
I've reinstall faux123's kernel and this method seem to work.
Thank you!
i recently decided to install faux's newest kernel and im getting a slightly different problem. Instead of the widgets just not appearing at all they say problem loading widgets. this is using launcher pro.
Have had this problem a lot. Solved with faux's 0.1.7.
Related
Close thread please.
Has anyone tried this ROM? any comparison should be with LOL v1.4 or Megatron? some screenshots would not?
Wow, custom ROM based on 2.2.2! Nice one, sir, I am actually considering moving on from 2.2.
Please specify the apps you removed or the ones you kept, whatever is shorter.
When I'll back home (23.00 gtm+1) i'll update this post with your requests, ok? I love my rom, eheh! Take patience, please!
And if you don't mind, could you post the differences from 2.2 to 2.2.2?
Magnumutz said:
And if you don't mind, could you post the differences from 2.2 to 2.2.2?
Click to expand...
Click to collapse
Of course!!! Thanks!
any screenshots?
First Post updated!
Good job mate. As soon as I login through pc, I will try it.
DookMatt said:
First Post updated!
Click to expand...
Click to collapse
Sent from my LG-P500 using Tapatalk
Still want to ask to go with this rom use black statusbar as in this post http://www.androidworld.it/forum/modding-e-firmware-lg-optimus-one-114/%5Bmodifiche-rom-lol-1-4%5D-statusbar-e-icone-11534/? statusbar looks better black than white. Today afternoon I try to flash it because it seems that it is a good rom
EDIT:So I flash this rom, looks fast .. I tried to flash blackbar and works up to an hour, not to see :-(. and I miss that little power button is unable to reboot and reboot into recovery. even restore a backup of titanium applications and see how then will work. yet satisfied, and praise your good work on this rom
In future i'll not change theme and keyboard because these are original and stable! All porting having some problems... i think that theme for lol 1.4 (only 1.4) works on nessy. I hope that you like this rom. It's very fast but i must remove adw because it's so slow with zeam (very fast)
LOL Theme 1.4 works but blackbar not see the clock. ADW not use otherwise, I prefer the GO Launcher EX czech. so far it seems fast rom. For me the crucial speed and battery life
More battery life with "ondemand" governor!
the theme does not work because it does not change the file "android-policy.jar" I think... maybe..!
you must flash theme only for froyo 2.2.2!!!
LOL 1.4 is 2.2.2.enough flash original status bar and then it black bar and all is well . I can flash the kernel : Kernel Optimizations Touchscreen v1.1 http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237 ???? it should work better than Mik_os in the 1.1 kernel?
mitsuu84 said:
LOL 1.4 is 2.2.2.enough flash original status bar and then it black bar and all is well . I can flash the kernel : Kernel Optimizations Touchscreen v1.1 http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237 ???? it should work better than Mik_os in the 1.1 kernel?
Click to expand...
Click to collapse
yes you can flash sippolo's kernel without any problems
mitsuu84 said:
LOL 1.4 is 2.2.2.enough flash original status bar and then it black bar and all is well . I can flash the kernel : Kernel Optimizations Touchscreen v1.1 http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237 ???? it should work better than Mik_os in the 1.1 kernel?
Click to expand...
Click to collapse
Yes, you can flash it but I prefer Mik_os kernel!
and who do you think is better? Mik_os the kernel in the 1.1 kernel or sippolo? thanks for the advice
mitsuu84 said:
and who do you think is better? Mik_os the kernel in the 1.1 kernel or sippolo? thanks for the advice
Click to expand...
Click to collapse
sippolo's kernel fix also axis inversion and implement mik_os fix ...
mitsuu84 said:
and who do you think is better? Mik_os the kernel in the 1.1 kernel or sippolo? thanks for the advice
Click to expand...
Click to collapse
Because I like his kernel and I have never had problems. Anyway, if you want to use sippolo kernel, you can!
EDIT: Now i flash sippolo kernel and test it. Maybe in next release I'll integrate it, ok?
DookMatt said:
Of course!!! Thanks!
Click to expand...
Click to collapse
Ok, where are they?
Sent from my LG Optimus One
Hi guys,
i installed Megatron and franco's kernel and I have an annoying problem. My CPU usage is very high, always at about 80 % and I don't know why. My launcher is always freezing after I unlock my phone. I tried Launcher Pro, ADW Launcher and GO Launcher. Does anyone have a solution for me?
The problem might be franco's kernel. did you have this problem before flashing the kernel? Franco has always maintained that the kernel is for his devoid.franco rom, and to try it on another rom at your own risk.
Sent from my LG-P500 using XDA App
Yeah reflash your ROM again.. without Kernel. Franco's Kernel work's on other ROM some don't..
Flash cavermans v3 kernel
its franco's kernel... i CONFIRM this i switched back to sippolo's
I can't find sippolo's kernel. Does anyone have the link for it?
Chun-kun said:
I can't find sippolo's kernel. Does anyone have the link for it?
Click to expand...
Click to collapse
1) version 1.0 http://forum.xda-developers.com/showpost.php?p=11256797&postcount=198
2) version 1.1 http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237
Hello,
I have the same problem and I have 2.6.32.39-franco.Kernel.v13
and devoid.franco.v5 ROM. When I switch off and switch on my Optimus, for a few minutes it's working perfect, but after a few minutes of using phone I have the problem with Launcher freezing. I tried use default Zeam Launcher, GO Launcher, Launcher Pro but I'm affraid, that it doesn't depend's on launcher.
Can somebody help me?
Thank a lot for any suggestion!
EDIT:
I have installed kernel from blackz1982's post and it's absolutly perfect!!
So I'm using devoid.franco.v5 ROM and Sippolo's Touchscreen Optimizations Kernel v1.1 and everything seem's to be OK.
Today a tried ogo2's beta3 ROM. In SetCPU I can't change the frequency. There are min 480-max 600 Mhz, if I change the value, nothing happens. That's wrong because it drains my battery.
Yeah, same problem here... such a pity because other than that its a great ROM!
Not really an 'issue' - the kernel isn't set up to allow overclocking, so why would it?
Not just overclocking. I can't go under 480 Mhz. That's a bigger problem for me.
cserepg said:
Not just overclocking. I can't go under 480 Mhz. That's a bigger problem for me.
Click to expand...
Click to collapse
I don't think the kernel allows you to change clock speeds from the MAX600 MIN480 HTC set as the default. Not an issue, but that feature will be added sometime (ogo2 said it would eventually I think)
OK, I thought that the default min clock speed is 245 Mhz.
Oh ok, didn't know it depended on the kernel, thanks.. This may be a totally noob question, but this is the Q&A section so, can I not just flash another kernel that does enable overclocking...?
Guys, cannot start neither beta3 nor beta4. When flash beta3 (through Clockworkmod 3), the system doesn't load, green 'HTC' letters tend to reboot. After beta4 installation the same screen, but static - without any reboots. I have S-ON. Wiping doesn't help.
Please, advise what to do.
Cheers!
cserepg said:
Today a tried ogo2's beta3 ROM. In SetCPU I can't change the frequency. There are min 480-max 600 Mhz, if I change the value, nothing happens. That's wrong because it drains my battery.
Click to expand...
Click to collapse
I eventually answered my own question.. You can just flash another kernel.. Look under the Overclocking tutorial in the Dev section...
It's ok now, I am using B-ROM. In this I've got too much reboot, battery drain, GPS issues, etc. Maybe beta 5-6-7 will get a chance...
cserepg said:
It's ok now, I am using B-ROM. In this I've got too much reboot, battery drain, GPS issues, etc. Maybe beta 5-6-7 will get a chance...
Click to expand...
Click to collapse
I'm using Blay0's ROM as well, haven't had any issues so far... are u doing a full wipe before you flash the ROM...?
If I installing a different ROM I always do a full wipe sure. I did not do full wipe, if I installing a newer version of a same ROM. Btw the most stable ROM is Blayo's, next Cyanogen, but there are no new sense...
A 'Team Highly Medicated' Release:
Hello everyone,
As highly anticipated, here is my port of dumfuq's overclocking patches ported to 2.6.35.10.
If you test it and Android either doesn't boot or is very slow, then you are experiencing an incompatibility that cannot and will not be fixed. Please note, I do not know if this kernel is compatible with Android versions below Gingerbread (2.3) because the Interprocess Communication (IPC) agent version differs.
http://www.multiupload.com/CNKQEWXIUH
Notice (added 7/20/2011): It has been made apparent by users and myself that as your battery gets lower, the slower your phone will become despite it showing it is overclocked. This is most likely because 787MHz requires the max voltage and the phone is unable to maintain that voltage as the phone loses charge. While batteries are measured in mAH (milliamps), the voltage exerted from the battery progressively decreases with the loss of mAH. The reason it requires this voltage is because of FSB and CPU multipliers... it is otherwise impossible to obtain that clock-rate with lower voltages. I will investigate possible workarounds.
No need to disable perflock. Remember to use SetCPU to actually overclock! Interactive governor enabled by default - it's a beauty!
Version 3, UPDATE 6/22/2011 @ 8:18pm CST:
- dumfuq was very helpful and I have (hopefully) now fixed the instability issues present in version 2.
- Due to complications with how frequencies are stepped I am limiting the max frequency to 787MHz.
- Please note, this is a TEST version and I am seeking any feedback regarding stability.
Version 2, UPDATE 5/27/2011 @ 11:24pm CST:
- Fix wifi.
- Actually enable Interactive governor by default.
Like it? Click the "Thanks" button - or even better "Donate"!
Peace out.
Is this the kernel that was mentioned to be added to the Salsa Slide ROM?
Although I suppose that's more of a question for Ohgami.
Can I just use this with it anyways? Thanks nbetcher!
SefEXE said:
Is this the kernel that was mentioned to be added to the Salsa Slide ROM?
Although I suppose that's more of a question for Ohgami.
Can I just use this with it anyways? Thanks nbetcher!
Click to expand...
Click to collapse
Ohgami wanted to have me release it separately. So yes, you most certainly can use it with it anyways.
Thanks nbetcher
Sent from my T-Mobile myTouch 3G Slide using XDA App
Ah yes what we've been waiting for. I agree though this kernel is Damn snappy without oc. But I have to try it out right. I'm curious to know though, if you said this works with ext2/3/4, will darktremor a2sd work with this and salsa port?
Sent from my fingertips using Android.
I got stuck on splash screen for 20 minutes. No luck. I did a clean install of salsa 2.0.1 and flashed this update. Could it be that I didn't let the Rom boot then flash the updated kernel?
Sent from my fingertips using Android.
Wagedroid said:
I got stuck on splash screen for 20 minutes. No luck. I did a clean install of salsa 2.0.1 and flashed this update. Could it be that I didn't let the Rom boot then flash the updated kernel?
Sent from my fingertips using Android.
Click to expand...
Click to collapse
retry i was stuck for a little bit but it came around
EDIT: the kernel keeps freezing my phone on salsa rom
Force Close City. Running CM Nightly 76. Fixed permissions and I still get a bunch of FC popups.
Hi, great job!
Just want to ask you what do you mean by "Apps2SD included"?
Is this meaning that you have included ext2,3,4 support directly in the kernel (not as module)?
Thanks.
ogo2 said:
Hi, great job!
Just want to ask you what do you mean by "Apps2SD included"?
Is this meaning that you have included ext2,3,4 support directly in the kernel (not as module)?
Thanks.
Click to expand...
Click to collapse
From the O.P.
Apps2SD included: http://www.multiupload.com/9EVC6CL8FP (your ROM needs Apps2SD support though!)
Non-Apps2SD: http://www.multiupload.com/8N1JPBM4N0
(By "Apps2SD", I mean the old-school Ext2/3/4 separate partition on your SD card. Either of these zips support the crappy Froyo (or higher) "Move to SD" function.)
I removed Perflock from the kernel entirely, so no need to disable Perflock.
koolkidjay1321 said:
retry i was stuck for a little bit but it came around
EDIT: the kernel keeps freezing my phone on salsa rom
Click to expand...
Click to collapse
I'm sorry to hear it's freezing. It's most likely clocked too high. Please make sure to clock it down.
ogo2 said:
Just want to ask you what do you mean by "Apps2SD included"?
Is this meaning that you have included ext2,3,4 support directly in the kernel (not as module)?
Click to expand...
Click to collapse
No, it's been included by Kitchen via the init.rc. Kitchen batches the init.rc to add Apps2SD support.
Wagedroid said:
I got stuck on splash screen for 20 minutes. No luck. I did a clean install of salsa 2.0.1 and flashed this update. Could it be that I didn't let the Rom boot then flash the updated kernel?
Sent from my fingertips using Android.
Click to expand...
Click to collapse
Same here, using latest CM nightly.
this kernel freezes my legend
ogo2 said:
this kernel freezes my legend
Click to expand...
Click to collapse
Overclocking or at boot?... Try lowering your speed and don't set it to start at boot.
Sent from my fingertips using Android.
I have not set anything connected to overclocking.
The system just hangs on boot (after entering the pin code and before the sense is loaded).
ogo2 said:
I have not set anything connected to overclocking.
The system just hangs on boot (after entering the pin code and before the sense is loaded).
Click to expand...
Click to collapse
I don't know if the Legend has the same frequency/voltage/bus speeds as Latte, so I can't promise that this would work on another device like the Legend. I'm learning that although the Legend is similar to Latte, they do have some very different parts.
nbetcher said:
I don't know if the Legend has the same frequency/voltage/bus speeds as Latte, so I can't promise that this would work on another device like the Legend. I'm learning that although the Legend is similar to Latte, they do have some very different parts.
Click to expand...
Click to collapse
They are both based on the MSM7227 SoC, so there shouldn't be any dramatical difference between them.
i had to load the rom before loading the kernel
koolkidjay1321 said:
i had to load the rom before loading the kernel
Click to expand...
Click to collapse
Tried this, thank cwm for backups. Fail, stuck on splash.
Sent from my fingertips using Android.
I'm using the InParisv4 Rom. Is anyone using SetCPU with this? If so, what overclock setting is working for you?
If you want to overclock, you need an overclockable kernel. Paris v4 uses the stock kernel. Flash Pershoot's kernel and you'll be able to overclock to 1.4ghz.
Don't forget the "thanks" button if this helps you.
Thank you! I already flashed Pershoot's kernel over that ROM. Was just afraid to overclock too high and then cause performance issues with my tab. But I will go on ahead and overclock to 1.4. Thanks slack.. will click the 'thanks' button right now! And please.. if anyone is aware of a reason why I should NOT do this, please advise
Please use the Q&A Forum for questions Thanks
Moving to Q&A
My tab runs perfectly stable at 1.4 ghz. If you have trouble just clock back down.
Sent from my DROID2 using XDA App
Thanks FillTheVoid... so just to be sure, do I just set the Min and Max to 1.4ghz?
seanmack said:
Thanks FillTheVoid... so just to be sure, do I just set the Min and Max to 1.4ghz?
Click to expand...
Click to collapse
set the max to 1.4 but leave the min on the lowest setting.
I just installed In Paris v4 ROM into my tab, and flashed pershoot's kernel. However when I go into SetCPU, the max is still only 1.0Mhz. Could I have used the wrong kernel? I used the TW UX one.
mrhazey said:
I just installed In Paris v4 ROM into my tab, and flashed pershoot's kernel. However when I go into SetCPU, the max is still only 1.0Mhz. Could I have used the wrong kernel? I used the TW UX one.
Click to expand...
Click to collapse
Did setcpu ask for SU permissions? If not, go and open up superuser quickly and try again.
Don't forget to click thanks if this helped you!
DaAwesome1 said:
Did setcpu ask for SU permissions? If not, go and open up superuser quickly and try again.
Don't forget to click thanks if this helped you!
Click to expand...
Click to collapse
It was set for permissions. I just reinstalled SetCPU and then it worked right away, weird. Thanks though!
Is setcpu free? If so where can I find it?
its a paid app, but its free for xda members. just search for setcpu 2.2.4 and it should come up.
edit: found it for you:
http://forum.xda-developers.com/showthread.php?t=505419
Thank you for that Jager555
I prefer interactive cpu governor over ondemand.