Hi, I've gone through all search engines and am slightly confused whats going on.
I was trying to flash my sg2 today and it was at analyzing part of in my odin and was stuck at do not turn off warning, after waiting for 5 minutes, nothing happened. Googled it up. various places (including this) suggested removing the battery and restart. However I pressed the power button first to power it down.... removed battery, poped everything back in. no response on phone, tried hard reset combo, nothing, removed battery couple of times, just no response. I take the phone is bricked?
However what really makes me doupt is, I plugged phone into charger. phone was hot at that point. So I left it for another half hour, came back. It was still quite hot - i mean the cpu must be working to generate that kind of heat. So I am just wondering, is it still def bricked or since cpu is working there could be a way to it?
P.s. I know its carrier specific, but if I have insurance, will self flashing/upgrading ur phone without official release void the warranty?
small update, I removed battery for 15 minutes, to let it cool down, touched it, it was all cool, put the battery back in - and 5 mins later, the cpu area is all hot.....yet no buttons are working... at least the hard reset is not responding....
jtgizmo said:
Hi, I've gone through all search engines and am slightly confused whats going on.
I was trying to flash my sg2 today and it was at analyzing part of in my odin and was stuck at do not turn off warning, after waiting for 5 minutes, nothing happened.
REFLASH. usual fix .
Recovery Mode
Download mode ???
P.s. I know its carrier specific, but if I have insurance, will self flashing/upgrading ur phone without official release void the warranty?
Flashing stock Samsung rom may void sellers warranty but Not Samsung warranty .
Custom roms or rooting voids all warranty .
Flashing wrong rom may void warranty .
I would presume any flashing voids any insurance .
jje
Click to expand...
Click to collapse
JJEgan said:
jtgizmo said:
Hi, I've gone through all search engines and am slightly confused whats going on.
I was trying to flash my sg2 today and it was at analyzing part of in my odin and was stuck at do not turn off warning, after waiting for 5 minutes, nothing happened.
REFLASH. usual fix .
Recovery Mode
Download mode ???
P.s. I know its carrier specific, but if I have insurance, will self flashing/upgrading ur phone without official release void the warranty?
Flashing stock Samsung rom may void sellers warranty but Not Samsung warranty .
Custom roms or rooting voids all warranty .
Flashing wrong rom may void warranty .
I would presume any flashing voids any insurance .
jje
Click to expand...
Click to collapse
I cant get into download or recovery mode, since its not responding to any button combination nor is it recognized by pc when trying to use usb connection.
Click to expand...
Click to collapse
I should also clarify, it all went fubar after following these instructions for DarkyRom:
Unzip the BASE ROM into one folder. It should have a file PDA. Open ODIN now (I use 1.7), in the PIT file option, select the pit 512 file. This should automatically tick the repartition option in ODIN 1.7 (if not, make sure it's ticked). Select the PDA file in the PDA Box. Connect your phone to the PC, make sure it's connected. Click start, wait for it to finish. Close ODIN, let your phone Reboot.
Click to expand...
Click to collapse
you may need to try using the usb jig which typically forces it into download mode again. search "Samsung USB Jig" on ebay
jtgizmo said:
I should also clarify, it all went fubar after following these instructions for DarkyRom:
Unzip the BASE ROM into one folder. It should have a file PDA. Open ODIN now (I use 1.7), in the PIT file option, select the pit 512 file. This should automatically tick the repartition option in ODIN 1.7 (if not, make sure it's ticked). Select the PDA file in the PDA Box. Connect your phone to the PC, make sure it's connected. Click start, wait for it to finish. Close ODIN, let your phone Reboot.
Click to expand...
Click to collapse
Did you get the above instructions from This Link?
achillies400 said:
Did you get the above instructions from "This Link"?
Click to expand...
Click to collapse
Yes, thats the one
P.S. cant post links as new user, so edited ur quote
jtgizmo said:
Yes, thats the one
P.S. cant post links as new user, so edited ur quote
Click to expand...
Click to collapse
Dude you messed up, that ROM is not for the SGS2 and neither are the instructions, You need a Samsung service center or a de-bricking service
what?
Damn I cant post links, well I got to it via samsware 2.3.5 leak announcement, there was a link to darkys custom rom, from there there was at top Beta noob guide, I clicked english version, I landed on the page that was called: Beginners/noob friendly guide to flash any BETA release and from there I ended up on the ...Final v10.2 - Official DarkyROM - Gingerbread (JVQ 2.3.4) - Noob-Friendly...
sigh, i didn't see it mentioning not being for sgs2, and since I got there by starting from sgs2 article, I thought they are all linked....
I've sent it to service...
where did I go wrong....
When you go to return it, do not tell them you flashed it. Always worked for me just playing dumb.
Sent from my SGH-T959 using XDA App
yep, did that, I just said it froze and then stopped responding. They didn't ask anything just sent it off
Related
My problem is that I had no idea that i9000 and Fascinate are complete diffrent firmwares. I flashed the 2.2 i9000 onto my Fascinate, I didn't find out this was a huge FUBAR until after the phone wasn't turning on and then I did some extensive searching. So now flashed the CWMRecovery and then the Stock-i500 files. Except for the Recovery file which fails when I try to run it on Odin... I'm completely lost. If anyone knows if it's possible to fix my phone, I would appreciate the help
its bricked. is it still under warranty? tell them it froze and wont turn on. are u stuck in a boot loop?
It was.. it would try to boot up into i9000 then the regular Samsung logo and then I'd get a blue pixelated mess... now when I hit the power buitton there's a cell phone and PC picture with a triangled exclamation mark in the center.
AdventXD said:
It was.. it would try to boot up into i9000 then the regular Samsung logo and then I'd get a blue pixelated mess... now when I hit the power buitton there's a cell phone and PC picture with a triangled exclamation mark in the center.
Click to expand...
Click to collapse
Sounds like it wants to be hooked back up, like it's not out of download mode. That's happened to me when I've unplugged the USB cable when it wasn't expecting me to. Dunno, there is a thread here somewhere about flashing the wrong image, then flashing an intermediary image, then the VZW image and getting things back. Not sure if it applies here, though... Good luck...
Boot in Download mode again
Dont Use Samsung MicroUSB Cable use any Good Quality MicroUSB instead
Flash the Clockwory Kernal and Recovery using ODIN
Copy ClockworkMod Recovery in update.zip format to SDCard
Boot into Recovery in Default Samsung Recovery Apply Update this will take you to clockwork
Flash any Compatible Clean ROM and you are in business,For me this Worked
You see the cable / triangle icon, it means your flash failed to take, and was incomplete. You need to re-flash, start with the kernel. I would use the CWM kernel as mentioned. If that fails let us know.
The only real thing you can do to "brick" this phone is to overwrite bml12 (modem.bin). For example, if you flashed anything with the "phone" box in odin, that will kill your modem. Other than that it will take a little work, but it's all recoverable.
Ok. For one, i have posted warnings all over the place to not do what you did.
And two, if what you flashed an Odin restore file with a modem in it, you will no longer have a working phone. We don't have a way to fix it. Sorry dude, best bet is to take it back to verizon and beg for a warranty replacement. If you are at the phone and computer icon right now, i would just leave it and take it into vzw like that.
namebrandon said:
Other than that it will take a little work, but it's all recoverable.
Click to expand...
Click to collapse
Nope, there are other things you can do to brick it / make it into just a fancy PDA
fallingup said:
Ok. For one, i have posted warnings all over the place to not do what you did.
And two, if what you flashed an Odin restore file with a modem in it, you will no longer have a working phone. We don't have a way to fix it. Sorry dude, best bet is to take it back to verizon and beg for a warranty replacement. If you are at the phone and computer icon right now, i would just leave it and take it into vzw like that.
Click to expand...
Click to collapse
Yeah. Problem is this isn't the first site I went to. There were no warnings in the other guides... Just said "Upgrade Galaxy S to 2.2" It never mentioned it was only for the i9000 model... I've learned my lesson tho. Luckily my buddy works at Verizon and I don't have to jump through rings of fire to get a replacement. Thanks everyone
fallingup said:
Nope, there are other things you can do to brick it / make it into just a fancy PDA
Click to expand...
Click to collapse
Yeah, like put it in a microwave. Which I'm going to do with you shortly if you keep it up. I can always cancel that $97 during my free trial, you know..
Hey,, I recently got my galaxy s2 and im new in the android thing,, i want to flash my phone to litening rom but im worried that i might brick it,, what are the chances that i may brick my phone? tnx and more power
The risk is very small as long as you follow the instructions to the letter. Read from start to finish a few times before doing anything and double check everything. It's actually all very easy and straightforward
Edit: and have a look at the thread about backing up your EFS folder before flashing (you'll need root) it's in the dev section somewhere.
Sent from my GT-I9100 using XDA Premium App
99% chance of no problem rising to 100% chance of a brick if not following instructions .
Recover from a bricked phone = 99% success rate .
jje
JJEgan said:
99% chance of no problem rising to 100% chance of a brick if not following instructions .
Recover from a bricked phone = 99% success rate .
jje
Click to expand...
Click to collapse
^^^^^^^^^^^^^^^^^^^^^^^^ THIS
But how hard is it to really brick a SGS2 ?
I think i read about 1 person who couldnt get his phone up and running again .
SGS2 i belive is really hard to brick.
Sorry for my bad english
There are enough who totally brick a phone in the course of a year . But its hard to do plenty of oh hell moments but recovered flashing stock rom .
Brick tends to be a misused term SGS brick means it should work after flashing stock rom via odin . Other phones brick means dead phone return to factory no hope .
jje
As long as you never tick "Re-Partition" and insert the PIT in Odin its almost imposable to brick unless you somehow nuke the bootloader(which you shouldn't be able todo via flashing custom roms).
I dont even think theres much of a chance of radio bricks, worst that happens is that you have to re-flash.
veyka said:
As long as you never tick "Re-Partition" and insert the PIT in Odin its almost imposable to brick unless you somehow nuke the bootloader(which you shouldn't be able todo via flashing custom roms).
I dont even think theres much of a chance of radio bricks, worst that happens is that you have to re-flash.
Click to expand...
Click to collapse
I think once the radio is corrupted a new flash is impossible, well it is on HTC devices
[email protected]
Sent from my Samsung Galactic Crusader S II
tnx guys for the reply,, will follow the instruction carefully,, hope everything will be ok,,
Is it possible to recover from a bricked phone?
svj1187 said:
Is it possible to recover from a bricked phone?
Click to expand...
Click to collapse
As long as one of the (secondary) bootloaders is still intact and you can get into download-mode (maybe by using the USB jig), then yes.
JupiterdroidXDA said:
I think once the radio is corrupted a new flash is impossible, well it is on HTC devices
[email protected]
Sent from my Samsung Galactic Crusader S II
Click to expand...
Click to collapse
Nah, just flash the modem and all is good.
sadly,am new to android !! I read a forum in d web tat asked to load a file in pit for lightening rom and i bricked d device. Now its in service centre,hope it comes back alive
santhoshkcsk said:
sadly,am new to android !! I read a forum in d web tat asked to load a file in pit for lightening rom and i bricked d device. Now its in service centre,hope it comes back alive
Click to expand...
Click to collapse
If the service centre can't fix (when I sent mine to one they told me it was beyond economic repair) don't lose hope as this guy will probably be able to repair it for you: http://forum.xda-developers.com/member.php?u=1602851
Ended up being cheaper than if my local service centre had been able to repair it too.
Being new to flashing I was also very scared at the start. I was pulling my hair out when the first time I flashed a new rom and got stuck in a boot loop. Luckily I backed up the entire system and I was able to restore.
Make sure you do a back up of your system first.
The first time its scary, I had no nails after the first flash lol. But after that its fun, just make sure to read everything and follow the instructions to the letter.
Good Luck!!
Sim card not recognized
I have rooted by galaxy s2 and my phone fails to recognize the sim card and unfortunately I didn't backup my original rom to restore the previous settings
I tried various things: hard reset, install alternative (custom) roms all seem to have no effect on the sim card.
I am getting quite frustrtated with this, is there an original ROM for my location (GREECE, VODAFONE) to try with odin ? I should note that my mobile seems not to connect with the PC when I try to connect it via kies (odin works instead)
Is there a possibility that the phone's card sensors are physically damaged, thus return it for repairs ?
Thanks for your time
Hi,
I have a Galaxy S2 i9100.
I was using ODIN to update de OS but I left checked the RE-PARTITION
box and now it´s dead.
I think that I erased the main memory so I can´t turn it on, no
charge, no nothing.
I couldn´t even enter in Download mode.
So I think it needs a hard reset... can you help me?
same problem if some one can answer this i will be happy
rocholaroca said:
Hi,
I have a Galaxy S2 i9100.
I was using ODIN to update de OS but I left checked the RE-PARTITION
box and now it´s dead.
I think that I erased the main memory so I can´t turn it on, no
charge, no nothing.
I couldn´t even enter in Download mode.
So I think it needs a hard reset... can you help me?
Click to expand...
Click to collapse
was using odin with checked re-partition and now its dead
is there any way to fix it?
the phone is 2 days old i dont think the store will take it back becasue of the rooting and rom changing
A JTAG repair is the only thing that can fix it I believe.
SGS2 - Download mode but no recovery
Hi!
I have a bit of a problem here as well when i was trying to flash back to the stock firmware. Now when I try to get to the clockwork recovery mod, I get the famous dead screen with symbols of mobile phone, exclamation point and a pc. I have been searching solution to this problem for hours now, and still I don't want to quit.
My previous custom rom was installed in with no problems. Litening rom 3.0.
Now, with usb jig i can get into the download mode, no problem there. It just seems that the traffic is just jammed.
Download mode works but Odin doesn't transfer anything. Gets stuck on the factoryfs.img while i'm trying to flash. Kies doesn't recognize the phone but pc recognizes the USB device with no problem. Original stock firmware doesn't load on the phone. Odin just stops transferring.
Things I've tried so far.
-Reflash (both litening rom again and stock firmware) with odin (Kies is not on while I do this, I checked)
-Kies (doesn't work)
-Download mode does work but it seems that phone doesn't accept any files.
-I tried the one-click unbrick which seemed to do something god but failed at the end.
What could I still try? I'm running out of options now.
I apologize for my bad english.
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Robbey said:
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Click to expand...
Click to collapse
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
well... if you've tried "every" (its not like there are a lot) button combination... then just go buy a jig from ebay and force it into download mode...
Matriak31 said:
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
Click to expand...
Click to collapse
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
anyone else seeing an increase in the "i bricked my phone" threads?
dont think its coincidence they are increasing after the american variants have been released. People need to check what model they have before flashing things.
OP: not saying thats what has happened to you as you dont say if you have the i9100 or not, hopefully you do.
bruflot said:
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Matriak31 said:
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Click to expand...
Click to collapse
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
bruflot said:
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
its ok and same goes by my post as well buddy..we all been in his position one way or the other
1st - Your phone is not bricked if it show an image. Whatever image it is. The only real software way to brick your phone is to flash bad bootloader or stop a bootloader while they are being flashed. However, Bootloader are flashed first. So if your phone stoped half way, you should not have trouble too much.
Remove the battery from your phone for like a minute, then reboot your phone in download mode (vol- + home + power and when the phone light up, release power.) Then flash another rom from odin.
Also, what rom did you used ? If you flashed a rom for another phone, then you might have flashed bootloader for that phone on yours, which is bad. In this case you will surely need a JIG.
sorry im new to this whole rooting/flashing thing. i downloaded the lightning rom: http://forum.xda-developers.com/showthread.php?t=1095274
i have never rooted or doneanthing to my s2 before. all i did was follow the instructions on the page and thought it would be all good? it froze about a quarter of the way there in odin so i just took my phone out.
I usually find from this state I can get back to bootloader or download states
push and hold vol+ and home then power for bootloader
push and hold vol- and home then power for download
sometimes the phone can seem to freeze a little or even die (this happened to me loads on the galaxy s and once already on the s2) and removing battery sim etc or attaching the charger can jog it
however as other have said a JIG is your friend if for no other reason that even if you recover without it, custom roms up the rom count which some twitchy carriers might invalidate your warranty for, the jig will reset this
you can get them from ebay for less than £3 delivered, or there are instructions on this site for making them yourself if you are so inclined.
simply search 'galaxy s2 jig' on ebay mine was delivered today from portugal as I am way too lazy to make one and only wanted a counter reset anyway
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Can you get into download mode (power/home/volume down) ?
technotika said:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Click to expand...
Click to collapse
Have you tried booting into download mode (as stated above), or using a jig? They cost a few dollars from Ebay, but they're a life saver in these such situations.
Have you tried to flash a different ROM? Maybe the cache.img is a dud or possibly corrupted?
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
I think a JTAG repair will probably be cheaper for you than paying Samsung to fix it. Do a search on here/Google to find a JTAG repairer close to you. If you can't find one near you, there's at least one that I know of you can post your phone to, have them repair it & they'll post it back.
technotika said:
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
Click to expand...
Click to collapse
Since the phone already is in "has to be sent in anyways" state, I think this quallifies for the "last resort", only do this as last step before packing it in for sending to service.
Try an Odin flash with a .PIT file and "[X] Repartition" checked.
But be very carefull with that, double check and tripplecheck everything is perfectly set up (correct stock ROM for your model, USB connection could sustain an earthquake, PC will not crash or loose power.... all that stuff) because this could totally kill it when something goes wrong.
Well, once the preflight is done, hit the mighty "Start" button and start to pray.
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
technotika said:
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
Click to expand...
Click to collapse
Are you using a single file when your trying to flash? I had an issue where it was stuck on the nand part, then I flashed using three files, PDA, Modem, Csc, and it was successful.
But seeing that you've tried repartition and that didn't work, you may be screwed.
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
Yeah, I tried to use a data cable that came with an HTC once. For some odd reason, it didn't work.
I've had Odin flashes go.wrong before and almost always fixed it by rebooting or restarting Odin. Maybe even try on a different PC. For me a 3 part file with pit + repartition has always done the trick.
However it does seem like your problem may be hardware related.
Sent from my GT-I9100T
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
HellcatDroid said:
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Click to expand...
Click to collapse
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
If they check that you might be in a bit of trouble warranty-wise. Or you might be lucky. If you can wait a few days or however long it takes to get a jig, might be worth getting one.
technotika said:
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
Click to expand...
Click to collapse
technotika said:
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
Click to expand...
Click to collapse
Regardless, please try the original cable, you have nothing to lose.
For the first few months, I was flashing ROM's fine with an el cheapo usb cable from ebay then suddenly, Odin would always hang. Reverted to original cable and everything has been fine ever since. I have also noticed that the file transfers and Kies Backups are noticeably quicker on the original cable.
Given you can access download mode, I'm crossing my fingers for you that its only a soft brick. Also, try plugging in the usb cable to a port directly on the motherboard (ie not one of those front panel extensions), also try different computers.
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Depends on what version firmware you have on your phone/what you tried to flash. Do you remember either/both of those ?
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
They don't work the new bootloader, but if you got your ROMs from Intratech's thread, most of them have the bootloaders replaced with the old one.
You could also try to flash the old-bootloader-only .tar that is also in Intratech's thread if the jig doesn't work, maybe it at least manages to flash that one so you can reset the counter.
well it's officially knackered
tried original samsung cable - same problem
different computer - pit and 3 files plus single files , same problem
cant even flash any old bootloaders to reset the jig!
so gutted it ran my life for me schedules, to do, all sorts, oh well
goosed - thanks anyway
Hi.
Please read all of what I tried before suggesting something.
I have a S3 GT-I9300 international version. It's from Orange Israel and its warranty recently ended.
All of what I tried below has been done with the phone in the Download mode by turning it while holding the power, volume down and the home key, there is absolutely nothing else this phone can do, if I just normally power it on it'll get stuck on the Samsung Galaxy S3 screen, I can't even get to the animated Samsung logo. Kies is uninstalled completely and I have no AV.
Now here is what I tried so far:
1. Most forums said that I could try a regular flash via Odin by inserting the firmware.md5 file into the PDA section and flashing it, but that just makes Odin get stuck on the process (Setup Connection...) or give me this error [1st screenshot from the left]
2. I also tried attaching the .pit file for my 16GB S3 named (GT-I9300_mx_20120220.pit) alone but that makes Odin get stuck on this process as well [2nd screenshot from the left]
3. I tried attaching both .md5 and .pit files at the same time but it just also gets stuck on the (Setup Connection...) forever. And when I say stuck I don't mean Odin stops responding, I mean it just hangs on that process.
4. I looked in forums even more and they suggested I try different USB ports or cables and I did, still nothing.
5. I tried different Odin versions for all of the things I already tried.
6. I tried flashing different firmware versions for all of the things I already tried.
7.1. I downloaded Heimdall Suite and I tried to use it since a guy mentioned it helped him immensely by him just installing the drivers using the "zadig.exe" file and choosing his S3 from the All Devices list and installing the driver, however I encounter something different because the program has Replace Driver option that gives me this error [3rd screenshot from the left]
7.2. I later discovered that I can install the driver anyway by clicking the arrow next to the button and choosing Install WCID driver, that worked successfully, however it hasn't solved my problem like the guy on the forum, for him, the S3 started to get recognized by Odin and it flashed his device successfully, for me, it still gave me that error.
8. After I installed the driver from Zadig I launched Heimdall Suite in hopes of finally flashing my device but it gave me this error when trying to load up the .md5.gz [4th screenshot from the left]
9. I then proceeded to add the .pit file I downloaded earlier into the Flash tab in Heimdall tool and adding the boot.img because I think that should be enough to get it going, plus I don't know what else to put. It gave me this error [5th screenshot from the left]
I'll keep updating this post when I try new stuff, however I would like you guys to suggest things I haven't tried before or supply me with files I haven't found already (.pit files, firmwares I'm not aware of, etc.). Would appreciate any little help of sorting this problem out, the warranty ended so I don't know what am I gonna do if I don't get it fixed :/
Thanks.
=/
Yep sounds bricked. If that's the case, send for repair. Your NAND is probably borked.
Out of interest, what does all the info on the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Yep sounds bricked. If that's the case, send for repair. Your NAND is probably borked.
Out of interest, what does all the info on the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YEes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Does that give you any idea of what I should try next?
I really want to put repairing the phone to the absolute last option.
Remove Kies = remove USB drivers Odin may not work .
PIT can kill your phone .
I don't think its SDS more like your flashing PIT has bricked the phone .
jje
XYMan28 said:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YEes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Does that give you any idea of what I should try next?
I really want to put repairing the phone to the absolute last option.
Click to expand...
Click to collapse
The problem with the S3 is that there really aren't many options before the last option. From what I can see, you have already tried them all.
It tells me you haven't got SDS, but we already knew you had a NAND issue, regardless of that. It was just a matter of interest.
JJEgan said:
Remove Kies = remove USB drivers Odin may not work .
PIT can kill your phone .
I don't think its SDS more like your flashing PIT has bricked the phone .
jje
Click to expand...
Click to collapse
I didn't mention that I also tried all of what I tried with Kies installed.
And it is SDS, I was just browsing through photos and the phone just locked up and restarted and couldn't get passed the GALAXY S3 flash screen, which is why I started trying all this crap, including flashing PIT. And the symptoms and behavior of the phone hasn't changed since the first time it restarted on me. So I definitely didn't change ANYTHING to the phone whatsoever.
XYMan28 said:
I didn't mention that I also tried all of what I tried with Kies installed.
And it is SDS, I was just browsing through photos and the phone just locked up and restarted and couldn't get passed the GALAXY S3 flash screen, which is why I started trying all this crap, including flashing PIT. And the symptoms and behavior of the phone hasn't changed since the first time it restarted on me. So I definitely didn't change ANYTHING to the phone whatsoever.
Click to expand...
Click to collapse
It could be SDS. We've seen a few failures like this where download mode doesn't show SDS symptoms. It doesn't mean the result is not SDS. Its uncomfirmable.
SDS possible , Nand damaged itself possible but 90% of problems are user error .
That error is often in trying to smash their way out of trouble avoiding the simple correct method and throwing everything at the phone .Following stuff from multiple forums then asking help on XDA at the end when it is to late .
Whatever you have done in the past right or wrong does not matter it is now a service centre job .
Samsung generally offer 24 months limited warranty but would be likely to reject due to custom rom count .
jje