Related
How do I remove dual core scripts... Or whatever is enabling them... I tried a couple kernels and still activated. Running eternity 1.4.2
Sent from my PG86100 using xda premium
Check your init.d folder for a file called 98dualcore, delete that. If you don't see anything, then your going to have to flash an unmodified stock kernel. Freeza has an explanation for that in his thread.
ceyo14 said:
How do I remove dual core scripts... Or whatever is enabling them... I tried a couple kernels and still activated. Running eternity 1.4.2
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
DDiaz007 said:
Check your init.d folder for a file called 98dualcore, delete that. If you don't see anything, then your going to have to flash an unmodified stock kernel. Freeza has an explanation for that in his thread.
Click to expand...
Click to collapse
Example: Ziggy's dual core kernel flash .zip file modifies thre system binaries in addition to the init.d script it adds. Kernel .zip files, imo, should not modify system binaries. System binaries should only be modified by ROMs. Of course, there is no official standard and this is just my opinion based on experience.
One main reason would be, majority of other kernel .zip files do not modify those same system binaries. So the only way to "undo" the files changed by Ziggy's kernel flash, would be to reload a ROM which replaces the three system binaries Ziggy changes.
Essentially, if you want to undo the changes made by Ziggy's kernel flash, you'll need to replace all files modified by his kernel flash. Flashing another kernel will not replace those files, but loading another ROM *should*.
Hope that helps!
I think i`ve read all tutorials about v6 supercharger for ics.
I understand that i need some patched services.jar but when i enter on that site I upload there my services.jar and say like this "Could not find classes.dex inside services.jar! Your ROM is most likely odexed (stock?).. Unfortunately the methods of patching an odexed services.jar are complex and require multiple files from your /system/framework/ directory. See zeppelinrox's post here for a guide to modifying your odexed services.jar file." I saw that post , when i apply v6 supercharger STARTER KIT , say that i don`t run root , but my phone is rooted ,and in script manager i check Superuser at v6 supercharger..
And if i try to install it , i get bootloop, i`m running 4.0.4 ICS ,stock ,rooted,
If i try without services.jar ,i`m 25% supercharged.I really want to be 100% because my phone gets laggy, and i want more multi-task.
Does it matter if i upload services.jar from my PC , or i need to upload it from my smartphone ?
I also tried to install Supercharger starter kit, but say thati i`m not rooted and i get segmentation fault in v6 supercharger too.Some screens to prove what i`m saying(Sorry for bad english , i hope you understand)
http://postimage.org/image/px4dp41gf/
http://s18.postimage.org/mnazdjnvt/Screenshot_2012_06_04_11_39_14.png
Callliope said:
I think i`ve read all tutorials about v6 supercharger for ics.
I understand that i need some patched services.jar but when i enter on that site I upload there my services.jar and say like this "Could not find classes.dex inside services.jar! Your ROM is most likely odexed (stock?).. Unfortunately the methods of patching an odexed services.jar are complex and require multiple files from your /system/framework/ directory. See zeppelinrox's post here for a guide to modifying your odexed services.jar file." I saw that post , when i apply v6 supercharger STARTER KIT , say that i don`t run root , but my phone is rooted ,and in script manager i check Superuser at v6 supercharger..
And if i try to install it , i get bootloop, i`m running 4.0.4 ICS ,stock ,rooted,
If i try without services.jar ,i`m 25% supercharged.I really want to be 100% because my phone gets laggy, and i want more multi-task.
Does it matter if i upload services.jar from my PC , or i need to upload it from my smartphone ?
I also tried to install Supercharger starter kit, but say thati i`m not rooted and i get segmentation fault in v6 supercharger too.Some screens to prove what i`m saying(Sorry for bad english , i hope you understand)
http://postimage.org/image/px4dp41gf/
http://s18.postimage.org/mnazdjnvt/Screenshot_2012_06_04_11_39_14.png
Click to expand...
Click to collapse
did you flash this with cwm:
http://www.mediafire.com/?rkpgf935bsb06o7
then try it again
let me know i wanna supercharge to
But i have 4.0.4 ,why i would flash .562 stock services?
Callliope said:
But i have 4.0.4 ,why i would flash .562 stock services?
Click to expand...
Click to collapse
Just try mate and look what it does
But maka a back up 1st with cwm
@Pandemic: can you test it? since you also want to supercharge it?
Madfysh said:
@Pandemic: can you test it? since you also want to supercharge it?
Click to expand...
Click to collapse
Yes today later mate
---------- Post added at 04:01 PM ---------- Previous post was at 03:17 PM ----------
i have test it, but no luck end in a bootloop and want to restore but he said md5 sum mis or something for f*ck sake, it throw my phone out the window &*( !!
what to do now :S start all over agian ??
Seems like no one know ...
Anyway , thanks for your help Pandemic
@Pandemic: create CWM zip with files you changed, boot into CWM mount USB storage and copy that zip to you sd card, after that simply flash it.
did you maybe change name of folder in backup folder?
Madfysh said:
@Pandemic: create CWM zip with files you changed, boot into CWM mount USB storage and copy that zip to you sd card, after that simply flash it.
did you maybe change name of folder in backup folder?
Click to expand...
Click to collapse
to late but i ry and no bro i didn`t change nothing
well im on unlock BL, 4.0.4 custom ROM (KA 20.1) and supercharger works just fine, i got %100. I've done supercharging before .431 fw and when i upgraded, the script recognized the services.jar as already supercharged and just kept on tweaking other setting such as OOm and such.
Is this info helpful for anyone? sorry if not...
I hope someone who know will post here, because this ICS is very hungry about resources
And i want to feel my phone working flawlessly ,With no wait time to enter programs ..
Segmentation fault in Neo L
I am using Sony Neo L rooted. I recently got this unusual problem. I was trying to force move certain apps to SD card (using apps like link2sd and droidsail app2sd) and it wouldn't move. I kept getting the error called "segmentation fault". I've been trying to find a fix for this for sometime without success. I tried completely un-rooting the phone and re-rooting it, formatting system, formatting SD card. But nothing seems to be working. Is there a way to fix this problem or is it permanent??
hey guys so i installed cm7
and then used DJNoXD.
i was wondering how can i go back to the original kernel?
how can i extract the kernel from the rom?
or do you guys have any other suggestions for which kernel should be used?
please help
Ramis93 said:
hey guys so i installed cm7
and then used DJNoXD.
i was wondering how can i go back to the original kernel?
how can i extract the kernel from the rom?
or do you guys have any other suggestions for which kernel should be used?
please help
Click to expand...
Click to collapse
You can use Roq's latest Kernel from Here.
Ramis93 said:
hey guys so i installed cm7
and then used DJNoXD.
i was wondering how can i go back to the original kernel?
how can i extract the kernel from the rom?
or do you guys have any other suggestions for which kernel should be used?
please help
Click to expand...
Click to collapse
Just flash cm7 again (without wiping anything).
After that you will have the original kernel again.
DJNoXD said:
Just flash cm7 again (without wiping anything).
After that you will have the original kernel again.
Click to expand...
Click to collapse
but that would reset all all my settings.
isnt there a way to extract the kernel?
No, if you flash a new version (or the same version) of cm you won't loose all your settings. Important is that you only wipe dalivik cache and cache, nothing else.
Than the only thing you loose are changes you have done to "system"-folder. But less people do this.
The normal configurations like wlan, ... are not touched / lost.
If you are scared to loose your rom data, create a backup (clockwork recovery) before.
Only extracting is not easily possible.
If you got the kernel "zImage" file and the "wireless.ko" module, you have to create the signed zip file before you can flash it.
source cyanogenmod
Code:
Option 1: Koush's AnyKernel zip file Koush's AnyKernel repacks the kernel in the package with the ramdisk currently flashed to the device. Therefore, we need to change the boot.img --base address so the boot.img will boot on the 32A device. This change needs to be made in mkbootimg.sh in the package. Koush has a 32A branch of AnyKernel here: http://github.com/koush/AnyKernel Clone the AnyKernel repo
git clone git://github.com/koush/AnyKernel.git -b 32A
This will make a folder called AnyKernel in your working directory. Keep this and just copy it to your packaging directory.
Copy the AnyKernel folder to a working directory. In the AnyKernel folder you have three folders:
kernel
Put the zImage in this folder. Leave it named zImage
META-INF
system
Put the wlan.ko in system/lib/modules. Replace the placeholder wlan.ko file.
Now you can zip the 3 folders together and sign them
zip -r port.zip *
java -classpath <path to SDK/tools>testsign.jar testsign port.zip signed-port.zip
for example:
java -jar ../SignApp/signapk.jar ../SignApp/testkey.x509.pem ../SignApp/testkey.pk8 port.zip update_signed.zip
This creates a signed zip file called port.zip and can be flashed. :) You are done.
DJNoXD said:
No, if you flash a new version (or the same version) of cm you won't loose all your settings. Important is that you only wipe dalivik cache and cache, nothing else.
Than the only thing you loose are changes you have done to "system"-folder. But less people do this.
The normal configurations like wlan, ... are not touched / lost.
If you are scared to loose your rom data, create a backup (clockwork recovery) before.
Only extracting is not easily possible.
If you got the kernel "zImage" file and the "wireless.ko" module, you have to create the signed zip file before you can flash it.
Click to expand...
Click to collapse
oh ok then, thanks
p.s would you recommend Roq's kernel or the default cm7 one?
(i won't be gaming on my phone. just want performance and battery life)
I haven't tried roqs latest kernel.
Just try it. Only you will know what you are searching for.
All custom kernels are good. But not every kernel is good for everyone.
Edit: What kind of performance are you searching for?
ok then,
thanks for the help
Here you can get the stock kernel for CM7
http://forum.xda-developers.com/showthread.php?t=1564203
Sent from my LG-P500 using XDA
yuripg1 said:
Here you can get the stock kernel for CM7
http://forum.xda-developers.com/showthread.php?t=1564203
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
awesome thanks
yuripg1 said:
Here you can get the stock kernel for CM7
http://forum.xda-developers.com/showthread.php?t=1564203
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
Haven't seen that you have updated your kernel to latest sources.
> you can use kitchen to extract zimage.. and copy modules from system>lib>modules folder.. I dont know how to repack it as a zip? may be by the link given above for stock kernel with outdated source.. just replace zimage and modules content on the zip.
I get the zImage using a flashable ZIP that I made.
http://db.tt/0WKE2o8w
What I did was simply modify a kernel installer (by Koush) to make it extract the boot.img of the ROM currently installed to the SD card.
After flashing it, I copy and rename the zImage in /sdcard, copy the modules in /system/lib/modules and make the flashable ZIP as any other kernel.
Sent from my LG-P500 using XDA
So I'm back from funeral, It was awful but death is a natural process of our daily lives.
This is a ROM for GT-I8190N
I need someone to test it.
Tweaks:
Code:
- many build.prop tweaks
- Battery tweak
- sqlite_optimize
- Darky ziaplign
- V6 120MB LMK Addon
- Adrenaline v3 Booster
- Bravia Engine
- xLoud Engine
Everything in leather.face's script is in this ROM
Mods:
Code:
Added: A custom power menu with Download and Recovery options.
Added: AOSP Lockscreen
Added: Long press back button to kill an app
Fixed: S-Beam not showing in the Settings menu (hopefully)
Fixed: NFC Service Force Close
Instructions
1. download the zip file
2. put the zip file onto your sd card
3. reboot into recovery
4. flash I8190NDXALL5-BenzROM-signed.zip file from your sd card
6. reboot
ROM is wipe for better compatibility. Backup your data before proceeding
Download Link - ROM <<< Click.
Thanks to Chainfire for his root.
Thanks to leather.face for his script.
Thanks to my country neighbour dariolob for his build.prop tweaks. They work great.
Benzonat0r said:
So I'm back from funeral, It was awful but death is a natural process of our daily lives.
This is a ROM for GT-I8190N
I need someone to test it.
Tweaks:
Code:
- many build.prop tweaks
- Battery tweak
- sqlite_optimize
- Darky ziaplign
- V6 120MB LMK Addon
- Adrenaline v3 Booster
- Bravia Engine
- xLoud Engine
Mods:
Code:
Added: A custom power menu with Download and Recovery options.
Added: AOSP Lockscreen
Added: RippleEffect Lockcsreen
Added: Long press back button to kill an app
Everything in leather.face's script is in this ROM
Instructions
1. download the zip file
2. put the zip file onto your sd card
3. reboot into recovery
4. flash I8190NDXALL5-BenzROM-signed.zip file from your sd card
6. reboot
ROM is wipe for better compatibility. Backup your data before proceeding
Download Link - ROM <<< Click.
Thanks to Chainfire for his root.
Thanks to leather.face for his script.
Thanks to my country neighbour dariolob for his build.prop tweaks. They work great.
Click to expand...
Click to collapse
i'll try this and report back later....basically just install from cwm recovery right? need to wipe cache and dalvic?
benz, i've installed the rom...unfortunately, the nfc failed to load....dialog box keep popping up with message "unfortunately nfc service had stopped"....had to restore nandroid backup.....hopefully this can be resolved..
Go to root explorer, navigate to /system/app or /system/framework and delete any .odex files you can find in there, but first give me the names of all .odex files in there.
Edit: I think I've found a solution.
Flash Odex-remove_I8190N.zip attached below and report back.
Benzonat0r said:
Go to root explorer, navigate to /system/app or /system/framework and delete any .odex files you can find in there, but first give me the names of all .odex files in there.
Edit: I think I've found a solution.
Flash Odex-remove_I8190N.zip attached below and report back.
Click to expand...
Click to collapse
so far so good....will report back after 3-4 days usage....thanks benz...:good:
You're welcome. It seems we've figured it out.
Benzonat0r said:
You're welcome. It seems we've figured it out.
Click to expand...
Click to collapse
one thing missing....the s-beam from the setting menu....roms seems smoother...
Thanks. I accidentally removed the string for S-Beam in res/values/strings.xml.
It'll be added again soon.
Edit:
Flash it via CWM/TWRP
http://www.4shared.com/zip/YMJIJtKg/CWM-Settings.html?
ROM updated, first post updated.
Benzonat0r said:
ROM updated, first post updated.
Click to expand...
Click to collapse
greatts benz....:good: guess this is the first custom roms for the N version.....the free space is hugeee...stock rom occupied around 500mb....this one around 200mb....the s-beam function not able to test right now,but the setting is there where it should be....
Flashed it without an issue, but for some reason it gets stuck on first page of setup wizard. Every time I click next it crashes and restarts.
Any advice for that?
Agyar said:
Flashed it without an issue, but for some reason it gets stuck on first page of setup wizard. Every time I click next it crashes and restarts.
Any advice for that?
Click to expand...
Click to collapse
try follow this sequence :
1-install the rom from cwm
2-install the odex zip file
3-reboot and set up phone
4-reboot recovery flash the cwm setting....
mine got stuck several time in the samsung initial setting.....the select language to be exact....
You don't have to flash Odex-remove anymore because the script now deletes /system/app and /system/framework directories.
Wait I'll update the ROM again
nazri5363 said:
try follow this sequence :
1-install the rom from cwm
2-install the odex zip file
3-reboot and set up phone
4-reboot recovery flash the cwm setting....
mine got stuck several time in the samsung initial setting.....the select language to be exact....
Click to expand...
Click to collapse
Thanks
Will try this. Got stucked on select language part also. When clicking next there it stucks.
Can you just give few more sentances of explanations for step 4?
Thanks again
ROM updated, download link updated.
Try it now.
Benzonat0r said:
ROM updated, download link updated.
Try it now.
Click to expand...
Click to collapse
benz,i apply the cwm cm10 black notification here http://forum.xda-developers.com/showthread.php?t=2119219 and the battery tweaks is missing, (the monitor battery usage function) can u look into it if u have the time...thanks.
---------- Post added at 10:46 AM ---------- Previous post was at 10:44 AM ----------
Agyar said:
Thanks
Will try this. Got stucked on select language part also. When clicking next there it stucks.
Can you just give few more sentances of explanations for step 4?
Thanks again
Click to expand...
Click to collapse
op updated first page....just flash it...should be ok now....seems like only 2 people here owned the N version....huhu....
Flashed latest updae and now everything works!
Nice and smooth so far
Thnx for doing something for two of us
nazri5363 said:
benz,i apply the cwm cm10 black notification here http://forum.xda-developers.com/showthread.php?t=2119219 and the battery tweaks is missing, (the monitor battery usage function) can u look into it if u have the time...thanks.
---------- Post added at 10:46 AM ---------- Previous post was at 10:44 AM ----------
op updated first page....just flash it...should be ok now....seems like only 2 people here owned the N version....huhu....
Click to expand...
Click to collapse
You can flash the one from there, files are the same.
Agyar said:
Flashed latest updae and now everything works!
Nice and smooth so far
Thnx for doing something for two of us
Click to expand...
Click to collapse
You're welcome.
Hey benz My S3 mini turned out to be the N version so I'm going to flash this right now
I am trying to go back to stock ROM and use the Bares' Init.d Scripts Using Stock Kernel (V3).
I reflashed the stock GB ROM using flashtool, rooted and installed xrecovery 0.3. After that, I installed Bares' INIT-D-RUNNER-TWEAKS-V3.zip using xrecovery and rebooted. When ever I try to use wifi I get "Error" just below the toggle to turn it on and i does not work.
It seems like someone else had this problem, but Bares says tha wifi errors shouldn't happen, see:
http://forum.xda-developers.com/showthread.php?t=2174564&highlight=wifi
I tried reinstalling three times (install original ROM and after that apply the Init.d scripts) in an unlocked bootloader X10. I then relocked the boot loader and tried again and I still get wifi problems.
Anyone else having problems like this? Is there a work around?
Obs: I could not post in the original threas as I am a newbie here and I am not allowed to post in the development section.
pjssilva said:
I am trying to go back to stock ROM and use the Bares' Init.d Scripts Using Stock Kernel (V3).
I reflashed the stock GB ROM using flashtool, rooted and installed xrecovery 0.3. After that, I installed Bares' INIT-D-RUNNER-TWEAKS-V3.zip using xrecovery and rebooted. When ever I try to use wifi I get "Error" just below the toggle to turn it on and i does not work.
It seems like someone else had this problem, but Bares says tha wifi errors shouldn't happen, see:
http://forum.xda-developers.com/showthread.php?t=2174564&highlight=wifi
I tried reinstalling three times (install original ROM and after that apply the Init.d scripts) in an unlocked bootloader X10. I then relocked the boot loader and tried again and I still get wifi problems.
Anyone else having problems like this? Is there a work around?
Obs: I could not post in the original threas as I am a newbie here and I am not allowed to post in the development section.
Click to expand...
Click to collapse
Hi bro, we need to edit install-recovery.sh script inside zip to include wifi module, please refer to HERE.
So, please use this zip, just flash it through Xrecovery, then it should be fine.
FYI
Regards
It didn't work out
Bares said:
Hi bro, we need to edit install-recovery.sh script inside zip to include wifi module, please refer to HERE.
So, please use this zip, just flash it through Xrecovery, then it should be fine.
FYI
Regards
Click to expand...
Click to collapse
First, thanks Bares for ansewring fast. But I am sorry to say that I did not succeed. First, I tried to simply add the line
insmod /system/lib/modules/wifi.ko
in the middle of install-recovery.sh and it didn't work out. I thought the reason was that I did not add the wiki.ko file to /system/lib/modules in the generated zip and started to look for it. I found the following the stock wifi modules from here. I got the modules from the x10_gb_stock_wifi_modules.zip file and added them to my tweaked INIT.D zip but it didn't work out. Anything that I am missing?
pjssilva said:
First, thanks Bares for ansewring fast. But I am sorry to say that I did not succeed. First, I tried to simply add the line
insmod /system/lib/modules/wifi.ko
in the middle of install-recovery.sh and it didn't work out. I thought the reason was that I did not add the wiki.ko file to /system/lib/modules in the generated zip and started to look for it. I found the following the stock wifi modules from here. I got the modules from the x10_gb_stock_wifi_modules.zip file and added them to my tweaked INIT.D zip but it didn't work out. Anything that I am missing?
Click to expand...
Click to collapse
Hmmm..., this problem could be happened if the rom wasn't settled properly too.
So, please try these steps (exactly) :
- Revert back to stock and setup the phone.
- Root it with the latest Flashtool and choose SuperSU !!!
- Install Xrecovery and let the rom settled first !!!
- Check an everything including wifi !!!.
- If its all working good then flash my script (see the thread for the latest one) through xrecovery and dont get rush on the first 2~3 reboot.
- And check the result.
Regards
It still does not work
Bares said:
Hmmm..., this problem could be happened if the rom wasn't settled properly too.
So, please try these steps (exactly) :
- Revert back to stock and setup the phone.
- Root it with the latest Flashtool and choose SuperSU !!!
- Install Xrecovery and let the rom settled first !!!
- Check an everything including wifi !!!.
- If its all working good then flash my script (see the thread for the latest one) through xrecovery and dont get rush on the first 2~3 reboot.
- And check the result.
Regards
Click to expand...
Click to collapse
I tried as you suggested and it didn't work. I tried both with your V4 scripts and with my modified version to include the "insmod /system/lib/modules/wiki.ko". Both did not work after some time to settle the original ROM (with 3 reboots) and some time to settle the modified ROM (3 more reboots).
I have also tried your new STOCK-GB-MOD-RELOAD.zip update file, but it didn't work either.
One thing I noticed is that your original update files delete the wifi.ko module from the /system/lib/modules directory that exists in the stock ROM. I even copied wifi.ko to my computer and cried an small zip that can be flashed by xrecovery to restore that file, but it is not enough to get it working. I tried to read your INIT-D-RUNNER-TWEAKS-V4 to see what it was doing but I did not understand how it changes wifi (I could not even find out where wiki.ko wasw being deleted).
It is a really shame, as your new STOCK-GB-MOD-RELOAD.zip looks exactly as what I wanted.
Anything else I should try?
pjssilva said:
I tried as you suggested and it didn't work. I tried both with your V4 scripts and with my modified version to include the "insmod /system/lib/modules/wiki.ko". Both did not work after some time to settle the original ROM (with 3 reboots) and some time to settle the modified ROM (3 more reboots).
I have also tried your new STOCK-GB-MOD-RELOAD.zip update file, but it didn't work either.
One thing I noticed is that your original update files delete the wifi.ko module from the /system/lib/modules directory that exists in the stock ROM. I even copied wifi.ko to my computer and cried an small zip that can be flashed by xrecovery to restore that file, but it is not enough to get it working. I tried to read your INIT-D-RUNNER-TWEAKS-V4 to see what it was doing but I did not understand how it changes wifi (I could not even find out where wiki.ko wasw being deleted).
It is a really shame, as your new STOCK-GB-MOD-RELOAD.zip looks exactly as what I wanted.
Anything else I should try?
Click to expand...
Click to collapse
Hi bro,
The last options is by remove these 2 lines below from instal-recovery.sh script inside zip provided (STOCK-GB-MOD-RELOAD.zip) :
HTML:
#init.d runner
busybox run-parts /system/etc/init.d/
BUT, ... the problem is : you will lost init.d runner for Stock Kernel, and it cause all tweaks will not run for sure.
The result is the rom will feel a bit slower than it should be.
Note : To be honest, i'm little bit confusing here, because everything should be fine.
OR : Use custom kernel for Locked Bootloader ( Doomkernel V6 for Locked Bootloader).
OR :
Just simply unlock the bootloader (it's really safe, but you have to follow the proper procedure on this), the simply procedure is :
- Revert back to Stock Rom using PC Companion or SEUS or Flashtool (Download the latest Flashtool Version (see the thread about how to unlock for more detail info, read it carefully!!!)., and then unlock your bootloader using this Flashtool.
Note :
Don't assume if got doubt about this.
- Flash custom kernel using above Flashtool (DoomKernel V6 integrated Bootmanager V2 Auto Rooted by Championswimmer is my recommendation) , because it's using Original Sony's boot splash logo.
- Flash above zip (STOCK-GB-MOD-RELOAD.zip) through Xrecovery.
- Finally you have to flash wifi modul for above kernel (find it on DoomLord's Thread).
Hope this help
Regards
Intalling another kernel does not work...
Hi,
I had a version with a prestine Stock + STOCK-GB-MOD-RELOAD.zip[/B] through Xrecovery. And I installed championswimmer kernel on top of it (thinking it would restore wi-fi) and it didn't work. That is realluy strange. I am starting to fear that the problem is with my X10 (it has some odd behaviors, like it always become slow when using a Ferakernel).
I'll try your first suggestion (turn off init.d scripts) and let you know how it went here.
Anyhow, great thanks!
Improvement
pjssilva said:
Hi,
I had a version with a prestine Stock + STOCK-GB-MOD-RELOAD.zip[/B] through Xrecovery. And I installed championswimmer kernel on top of it (thinking it would restore wi-fi) and it didn't work. That is realluy strange. I am starting to fear that the problem is with my X10 (it has some odd behaviors, like it always become slow when using a Ferakernel).
I'll try your first suggestion (turn off init.d scripts) and let you know how it went here.
Anyhow, great thanks!
Click to expand...
Click to collapse
I tried to turn off init.d scripts and it didn't work!
It was getting into my nerves. So I decided to look inside your INIT-D-RUNNER-TWEAKS-V4.zip file to see if something was weird to me. I am an old Linux desktop user and it looked very strange a line in the update-script script inside META-INF/com/google/android:
delete_recursive SYSTEM:etc/init.d
This woudl delete the whole /etc/init.d directory, somthing that looks very dangerous from a desktop user. So I just commented it and created a new zip file (allowing the copy of your custom init.d scripts, just avoid the full deletion before hand). I was sure it would not work, but it did... Wifi is working after I install this new zip.
I plan now to take a close look at exactly what files are being deleted to find out what should remain in order to keep wifi working in my phone. I'll let you know when I get it right. Now I have to leave as real life is calling me!
I found a solution
I found the problem an the solution.
Just after installing the stock rom, rooting, and installing xrecovery, there is a single file in /system/etc/init.d. It is called 00modules (see attachment). It looks like it create symlinks from the currect kernel modules to /system/lib/modules. This file is essential to get wifi working in my X10.
Since Bare's mods, like STOCK-GB-MOD-RELOAD.zip, delete all the files in there I end up without wifi after installing them.
The solution is simple. Just add this file to STOCK-GB-MOD-RELOAD.zip in "system/etc/init.d". It will them be copied back after being erased. Wifi works and I get Bare's mod fully functional.
Thanks Bares fo your mod!
pjssilva said:
I found the problem an the solution.
Just after installing the stock rom, rooting, and installing xrecovery, there is a single file in /system/etc/init.d. It is called 00modules (see attachment). It looks like it create symlinks from the currect kernel modules to /system/lib/modules. This file is essential to get wifi working in my X10.
Since Bare's mods, like STOCK-GB-MOD-RELOAD.zip, delete all the files in there I end up without wifi after installing them.
The solution is simple. Just add this file to STOCK-GB-MOD-RELOAD.zip in "system/etc/init.d". It will them be copied back after being erased. Wifi works and I get Bare's mod fully functional.
Thanks Bares fo your mod!
Click to expand...
Click to collapse
Oooops, OMG i really really... forgot to include it, i though i was .
Really sorry, will update my script immediately, thanks you so much bro :good:.
Best Regards
[email protected]
---------- Post added at 07:49 AM ---------- Previous post was at 07:38 AM ----------
pjssilva said:
I tried to turn off init.d scripts and it didn't work!
It was getting into my nerves. So I decided to look inside your INIT-D-RUNNER-TWEAKS-V4.zip file to see if something was weird to me. I am an old Linux desktop user and it looked very strange a line in the update-script script inside META-INF/com/google/android:
delete_recursive SYSTEM:etc/init.d
This woudl delete the whole /etc/init.d directory, somthing that looks very dangerous from a desktop user. So I just commented it and created a new zip file (allowing the copy of your custom init.d scripts, just avoid the full deletion before hand). I was sure it would not work, but it did... Wifi is working after I install this new zip.
I plan now to take a close look at exactly what files are being deleted to find out what should remain in order to keep wifi working in my phone. I'll let you know when I get it right. Now I have to leave as real life is calling me!
Click to expand...
Click to collapse
I create this line below :
delete_recursive SYSTEM:etc/init.d
Just to make sure no additional tweaks on init.d (and this is for users that don't want to fresh install the rom) , so the rom will 100% run with my files, just is't.
BTW, thanks a lot for the finding bro :good:. I have update my script to the FINAL one (see my thread), and it seem will be no more update after this one.
FYI
Best Regards