I think i`ve read all tutorials about v6 supercharger for ics.
I understand that i need some patched services.jar but when i enter on that site I upload there my services.jar and say like this "Could not find classes.dex inside services.jar! Your ROM is most likely odexed (stock?).. Unfortunately the methods of patching an odexed services.jar are complex and require multiple files from your /system/framework/ directory. See zeppelinrox's post here for a guide to modifying your odexed services.jar file." I saw that post , when i apply v6 supercharger STARTER KIT , say that i don`t run root , but my phone is rooted ,and in script manager i check Superuser at v6 supercharger..
And if i try to install it , i get bootloop, i`m running 4.0.4 ICS ,stock ,rooted,
If i try without services.jar ,i`m 25% supercharged.I really want to be 100% because my phone gets laggy, and i want more multi-task.
Does it matter if i upload services.jar from my PC , or i need to upload it from my smartphone ?
I also tried to install Supercharger starter kit, but say thati i`m not rooted and i get segmentation fault in v6 supercharger too.Some screens to prove what i`m saying(Sorry for bad english , i hope you understand)
http://postimage.org/image/px4dp41gf/
http://s18.postimage.org/mnazdjnvt/Screenshot_2012_06_04_11_39_14.png
Callliope said:
I think i`ve read all tutorials about v6 supercharger for ics.
I understand that i need some patched services.jar but when i enter on that site I upload there my services.jar and say like this "Could not find classes.dex inside services.jar! Your ROM is most likely odexed (stock?).. Unfortunately the methods of patching an odexed services.jar are complex and require multiple files from your /system/framework/ directory. See zeppelinrox's post here for a guide to modifying your odexed services.jar file." I saw that post , when i apply v6 supercharger STARTER KIT , say that i don`t run root , but my phone is rooted ,and in script manager i check Superuser at v6 supercharger..
And if i try to install it , i get bootloop, i`m running 4.0.4 ICS ,stock ,rooted,
If i try without services.jar ,i`m 25% supercharged.I really want to be 100% because my phone gets laggy, and i want more multi-task.
Does it matter if i upload services.jar from my PC , or i need to upload it from my smartphone ?
I also tried to install Supercharger starter kit, but say thati i`m not rooted and i get segmentation fault in v6 supercharger too.Some screens to prove what i`m saying(Sorry for bad english , i hope you understand)
http://postimage.org/image/px4dp41gf/
http://s18.postimage.org/mnazdjnvt/Screenshot_2012_06_04_11_39_14.png
Click to expand...
Click to collapse
did you flash this with cwm:
http://www.mediafire.com/?rkpgf935bsb06o7
then try it again
let me know i wanna supercharge to
But i have 4.0.4 ,why i would flash .562 stock services?
Callliope said:
But i have 4.0.4 ,why i would flash .562 stock services?
Click to expand...
Click to collapse
Just try mate and look what it does
But maka a back up 1st with cwm
@Pandemic: can you test it? since you also want to supercharge it?
Madfysh said:
@Pandemic: can you test it? since you also want to supercharge it?
Click to expand...
Click to collapse
Yes today later mate
---------- Post added at 04:01 PM ---------- Previous post was at 03:17 PM ----------
i have test it, but no luck end in a bootloop and want to restore but he said md5 sum mis or something for f*ck sake, it throw my phone out the window &*( !!
what to do now :S start all over agian ??
Seems like no one know ...
Anyway , thanks for your help Pandemic
@Pandemic: create CWM zip with files you changed, boot into CWM mount USB storage and copy that zip to you sd card, after that simply flash it.
did you maybe change name of folder in backup folder?
Madfysh said:
@Pandemic: create CWM zip with files you changed, boot into CWM mount USB storage and copy that zip to you sd card, after that simply flash it.
did you maybe change name of folder in backup folder?
Click to expand...
Click to collapse
to late but i ry and no bro i didn`t change nothing
well im on unlock BL, 4.0.4 custom ROM (KA 20.1) and supercharger works just fine, i got %100. I've done supercharging before .431 fw and when i upgraded, the script recognized the services.jar as already supercharged and just kept on tweaking other setting such as OOm and such.
Is this info helpful for anyone? sorry if not...
I hope someone who know will post here, because this ICS is very hungry about resources
And i want to feel my phone working flawlessly ,With no wait time to enter programs ..
Segmentation fault in Neo L
I am using Sony Neo L rooted. I recently got this unusual problem. I was trying to force move certain apps to SD card (using apps like link2sd and droidsail app2sd) and it wouldn't move. I kept getting the error called "segmentation fault". I've been trying to find a fix for this for sometime without success. I tried completely un-rooting the phone and re-rooting it, formatting system, formatting SD card. But nothing seems to be working. Is there a way to fix this problem or is it permanent??
Related
Hey
Is there any rom fro E10a, 'cause all I've seen is ROMs for E10i, or maybe anyone can point me in the right direction for making a ROM for E10a?
Thanx
here you go
go to my post on 3g/wcdma issue
http://forum.xda-developers.com/showthread.php?t=895105
i uploaded an e10a rooted x.x.x.x.24 firmware; the system is for xrecovery and the other files for bin4ry flash tools on the second post
PS: maybe i should re-do my post and make a tutorial since many members have confirmed it works
yes, please!
i too have e10a and would like to have a step-by-step to get a pre-rooted rom installed....
i can't seem to get app2sd of jit working on my mini... maybe a pre-rooted rom will solve my probs... any way to add app2sd and jit to the rom??
e10 xrecovery on its way...
hello,
i have followed the xrecovery method for making a pre-rooted e10a compatible update.zip with xrecovery pre-loaded. many thanks to the users who have provided this forum with the tools necessary for me to do so. i can confirm that i am tethering from it with barnacle as you are reading this!
the bad/good news (depends on how you look at it): since the 2.0.2.A.0.24 e10a update method's data connection icons would show up but would *not* allow me to have a functioning data connection, i decided that i needed to make a system image native to the e10a, so i used my own firmware's 2.0.1.A.0.47 system.sin. this means that canadian users will soon have a pre-rooted version of the latest (at least my SEUS says it is) firmware for their region.
the good news: e10a users will finally have a means to root their phones after updating to the latest firmware (2.0.1.A.0.47), on which z4root no longer works.
just give me either 1 or 2 hours to get a howto up on another thread or (it's getting late here) 24h to 36h to sleep / perform my daily non-computer tasks and then i'll update this post with a link to my thread / guide.
cheers,
uriah
ok try this
@watchyourbreath
for flashing a custom rom you'll need an already rooted firmware on your phone since you'll be needing xrecovery, if you have already xrecovery just download the update.zip from the thread i linked to in the previous post (second post on that thread), in xrecovery use the option wipe all data (factory reset) then use the option install update.zip from sd card
IMPORTANT: you should have the kernel that eclair uses 2.6.29 since my rom is 2.1 itself
that is for the pre-rooted rom
if you don't have xrecovery yet and don't have root, flash a 2.0.A.0.504 firmware (eclair) doesn't matter if it's not e10a ( read the thread i posted) then root it with z4root ( it's around the forums)
now for the jit an apps2sd part,
for jit you have to modify build.prop on the following parts
dalvik.vm.heapsize=30m
kernel.log=default
debug.sf.hw=1
and at the end of the file add this
dalvik.vm.execution-mode=int:jit
then extract the jit carpet from the atachements and place it on your sd card
then open a terminal and write the following
su
(give root permitions to terminal)
cd sdcard
cd jit
sh enable_jit.sh
then the phone should reboot and have jit enabled
on the apps2sd i can't help you because i havent tried it myself, because what i
do is remove the dop.iso file from the data folder with root explorer, that
gives arround 130 mb of free space also dop.iso is the option when you connect
your phone to install pc companion on the pc so if you already have it installed
there is no need for it on your phone
hope this helps
...as promised
http://forum.xda-developers.com/showthread.php?p=10371590
@uriah
thanks so much! I'm going to try it out later today...
thanks! this is just what i needed!
Thanx, that was exactly what I was looking for!!
kurotany said:
@watchyourbreath
for flashing a custom rom you'll need an already rooted firmware on your phone since you'll be needing xrecovery, if you have already xrecovery just download the update.zip from the thread i linked to in the previous post (second post on that thread), in xrecovery use the option wipe all data (factory reset) then use the option install update.zip from sd card
IMPORTANT: you should have the kernel that eclair uses 2.6.29 since my rom is 2.1 itself
that is for the pre-rooted rom
if you don't have xrecovery yet and don't have root, flash a 2.0.A.0.504 firmware (eclair) doesn't matter if it's not e10a ( read the thread i posted) then root it with z4root ( it's around the forums)
now for the jit an apps2sd part,
for jit you have to modify build.prop on the following parts
dalvik.vm.heapsize=30m
kernel.log=default
debug.sf.hw=1
and at the end of the file add this
dalvik.vm.execution-mode=int:jit
then extract the jit carpet from the atachements and place it on your sd card
then open a terminal and write the following
su
(give root permitions to terminal)
cd sdcard
cd jit
sh enable_jit.sh
then the phone should reboot and have jit enabled
on the apps2sd i can't help you because i havent tried it myself, because what i
do is remove the dop.iso file from the data folder with root explorer, that
gives arround 130 mb of free space also dop.iso is the option when you connect
your phone to install pc companion on the pc so if you already have it installed
there is no need for it on your phone
hope this helps
Click to expand...
Click to collapse
I cant find such file
Sent from my E10i
can't find it either... still leaning towards getting app2sd going.... i am hovering around 39 mb of free space but i would love to not feel so restricted!
gonna try the tuts posted above this weekend....
@kurotany, uriah
is it possible to use azuzu's newest rom (smalldevil) with this method of converting it to e10a 3g specs?
smalldevil: http://forum.xda-developers.com/showthread.php?t=903323
@ watchyourbreath,
I believe that would depend on whether the SmallDevil firmware is based on an E10i or an E10a firmware. However, you could try replacing my update.zip with his and using my guide for downgrading, etc.
If your data connection doesn't work when trying his update.zip, you might have a bit more luck using the .sin files from the guide posted earlier in this thread (the link posted before mine).
Good luck!
uriah
yep, its safe
@ watchyourbreath
yes, there is no problem using e10i roms, tried it myself while testing my tutorial for 3g/wcdma problems, since i belive most roms only replace the files that come in system.sin you shouldn't loose 3g, but if by any reason you do lose it you can do the flashing method in my first post link to get it back
PS: @ijama also, the file is located in /data, it should be there if when you plug your phone you get the option to instal the pc companion, if you only get conect phone and charge phone options then yep it's deleted, try searching with root explorer, it's in /data folder root
rom for a...
well upload some where your system.img...
and i can make one..
i don't understand, but i will do as i'm told once i do! do i need to get small tools installed and convert something? i'm kinda not a complete noob so you don't need to start from scratch...
and to clarify, if i can upload a system.img file for you, you can make a smalldevil rom for e10a?
clarification...
it would be possible.. so upload somewhere system.sin from your seus directory and i will do it..
is that ok?
sure is! i'm not home right now but i'll do it when i get home...
amazing! can't wait to be able to load a rom with root, xrecov, app2sd and jit already in place!!!
thanks so much in advance.... upload coming later on.....
aZuZu said:
it would be possible.. so upload somewhere system.sin from your seus directory and i will do it..
is that ok?
Click to expand...
Click to collapse
I will be waiting for your work with e10a aZuZu!
no system.img..
i still don't see link... of system.img nowhere..
but as far as i can see.. only diff between e10i and e10a is in build.prop, logcat and few libs...
so putting buid.prop and replacing logcat + libs should give working e10a rom...
Hi guys,
This is my very first post on XDA.
I've spent a lot of time parsing and looking for answers (too much if you ask my wife ) I'm no more feeling "alone" when I read all this people going mad for their phones
I managed to unlock my mini pro and install GingerDX v17 without any problem. Now I'd like to use a custom kernel (zombie), but as I installed the modules, I suppose I have to remove them before flashing the new kernel.
I'm looking for some hints and advices to be sure I do not brick my phone and follow all the good steps.
What I'm planning to do:
Delete the modules and files present in the zip I flashed (through command line of SDK, right ?)
Download the new kernel and place it in SD (well, follow the zombie thread instructions...)
Reboot in recovery (and do full wipe ?)
Flash the new kernel
Reboot
My phone specs:
X10 mini pro
Stock kernel
GingerDX v17
CMparts fix flashed
GingerDX modules flashed
Thank you for your help and suggestions.
Tim
PS:
I'm not sorry for my bad English as it's written we don't have to write it, right
your going somewhat right but follow these steps:
1) Delete the modules u flashed from the ginger-dx_module pack(for stock) from /system/lib/modules with root explorer
modules present :
cy8ctma300_ser.ko
ext3.ko
ext4.ko
jbd2.ko
jbd.ko
smartass.ko
x8mddi.ko
x8oc.ko OR U can directly flash the ROM zip which u downloaded without the modules but do not make factory reset or any wipe..
2)Download kernel on PC.. Open using Winrar or any zip.. you will find X10 Mini Pro_Zombie Panic Kernel v1.6.3_slade87.ftf file.. place the it in the /firmwares folder in flashtool..
3)turn off ur phone
4)Run the flashtool from PC select the kernel [ zombie panik] from list. it will ask you to connect phone in flash mode
5)so press the back button on phone and then connect using USB.. then the kernel will be flashed and u will be said to disconnect and reboot your phone..
6)your done
hope it helps..
Hey,
It took me more time to find a good root file explorer than flashing the new kernel. Finally ES Explorer did the work (after ticking root option in settings).
My phone is sooooooooooooo more reactiv ! Impressive.
Thank you faiyyaz for your help.
Tim
TimMayle said:
Hey,
It took me more time to find a good root file explorer than flashing the new kernel. Finally ES Explorer did the work (after ticking root option in settings).
My phone is sooooooooooooo more reactiv ! Impressive.
Thank you faiyyaz for your help.
Tim
Click to expand...
Click to collapse
no probs mate.. incase u want a good root explorer [which i prefer] here's the link in market
https://market.android.com/details?id=com.speedsoftware.rootexplorer&hl=en
quite useful and user friendly..
I've installed Jelly Vanilla Z 6.1 on FXP213 cm10 20130329 UNOFFICIAL smultron and WiFi won't turn on. Just screen ''Turning Wi-Fi on...''. What can I do to fix that?
Instal Wifi modules for you kernel a reboot (twice)
SalyczeQ said:
Instal Wifi modules for you kernel a reboot (twice)
Click to expand...
Click to collapse
How, can you explane me step by step, because I don't want to do something wrong?
Thank you soooo much! :fingers-crossed:
Melanija said:
How, can you explane me step by step, because I don't want to do something wrong?
Thank you soooo much! :fingers-crossed:
Click to expand...
Click to collapse
Goto the page from where you've downloaded the kernel, there must be a link for downloading wifi modules, download them, place them on ur sdcard and install them through recovery.
If theres no wifi modules, u can install another kernel, lyk 'Lupus JB'.
Sorry for my bad English.
Hit 'thanks' if i helped you.
Sent from public phone using coins.
pankaj.gaikar said:
Goto the page from where you've downloaded the kernel, there must be a link for downloading wifi modules, download them, place them on ur sdcard and install them through recovery.
If theres no wifi modules, u can install another kernel, lyk 'Lupus JB'.
Sorry for my bad English.
Hit 'thanks' if i helped you.
Sent from public phone using coins.
Click to expand...
Click to collapse
Problem is still there. I've installed same kernel again and sd card was damaged, after that I make backup and formatting and install cm10xtended by Hikari and flash modules. An my card again damaged and Wi-Fi won't work and I don't konw what else to do. I think if I flash another kernel ( like Lupus) again the problem will still exist. Do you think that the problem is in the JV Z? Please help me! :crying:
Melanija said:
Problem is still there. I've installed same kernel again and sd card was damaged, after that I make backup and formatting and install cm10xtended by Hikari and flash modules. An my card again damaged and Wi-Fi won't work and I don't konw what else to do. I think if I flash another kernel ( like Lupus) again the problem will still exist. Do you think that the problem is in the JV Z? Please help me! :crying:
Click to expand...
Click to collapse
hi, i got a similar problem with my smultron so i would be interested if you found a solution.
i figured out that in stock based rom (and kernel) the wifi works, in different cm builds it doesnt. i tried different kernels (even some i already got the wifi working) but nothing helped. For this kernels i didn't have to flash any modules ( the description said that i don't have to...(already included!?)).
I have to admit, that i don't know much about all this stuff, so i would really appreciate if someone could give me a hint about what to do
thanks allot!
Hmmmm...do this step....
1.using any file explorer with ROOT excess, go and delete....
a. /data/local/tmp
2.Then copy and paste all files from roms that you're using right now (flashable zip)....
a./system/lib/modules (flashable zip) to your phone /system/lib/modules (replaced all files with proper permission rwxr-xr-x)
3.delete other files that is not been replaced (can be identified by look at the date of the files/delete files that have old date)
4.exit the file explorer, turn of your phone and boot into fastboot....
5.flash any kernel you desire....
6.your wifi will fixed after that....
ah... i'm really sorry i didn't see your reply till now
didn't try your solution, but it the end i got it working again. don't remember how
anyway, thanks allot for your help!!!
iPusak Gaoq™ said:
Hmmmm...do this step....
1.using any file explorer with ROOT excess, go and delete....
a. /data/local/tmp
2.Then copy and paste all files from roms that you're using right now (flashable zip)....
a./system/lib/modules (flashable zip) to your phone /system/lib/modules (replaced all files with proper permission rwxr-xr-x)
3.delete other files that is not been replaced (can be identified by look at the date of the files/delete files that have old date)
4.exit the file explorer, turn of your phone and boot into fastboot....
5.flash any kernel you desire....
6.your wifi will fixed after that....
Click to expand...
Click to collapse
I am trying to go back to stock ROM and use the Bares' Init.d Scripts Using Stock Kernel (V3).
I reflashed the stock GB ROM using flashtool, rooted and installed xrecovery 0.3. After that, I installed Bares' INIT-D-RUNNER-TWEAKS-V3.zip using xrecovery and rebooted. When ever I try to use wifi I get "Error" just below the toggle to turn it on and i does not work.
It seems like someone else had this problem, but Bares says tha wifi errors shouldn't happen, see:
http://forum.xda-developers.com/showthread.php?t=2174564&highlight=wifi
I tried reinstalling three times (install original ROM and after that apply the Init.d scripts) in an unlocked bootloader X10. I then relocked the boot loader and tried again and I still get wifi problems.
Anyone else having problems like this? Is there a work around?
Obs: I could not post in the original threas as I am a newbie here and I am not allowed to post in the development section.
pjssilva said:
I am trying to go back to stock ROM and use the Bares' Init.d Scripts Using Stock Kernel (V3).
I reflashed the stock GB ROM using flashtool, rooted and installed xrecovery 0.3. After that, I installed Bares' INIT-D-RUNNER-TWEAKS-V3.zip using xrecovery and rebooted. When ever I try to use wifi I get "Error" just below the toggle to turn it on and i does not work.
It seems like someone else had this problem, but Bares says tha wifi errors shouldn't happen, see:
http://forum.xda-developers.com/showthread.php?t=2174564&highlight=wifi
I tried reinstalling three times (install original ROM and after that apply the Init.d scripts) in an unlocked bootloader X10. I then relocked the boot loader and tried again and I still get wifi problems.
Anyone else having problems like this? Is there a work around?
Obs: I could not post in the original threas as I am a newbie here and I am not allowed to post in the development section.
Click to expand...
Click to collapse
Hi bro, we need to edit install-recovery.sh script inside zip to include wifi module, please refer to HERE.
So, please use this zip, just flash it through Xrecovery, then it should be fine.
FYI
Regards
It didn't work out
Bares said:
Hi bro, we need to edit install-recovery.sh script inside zip to include wifi module, please refer to HERE.
So, please use this zip, just flash it through Xrecovery, then it should be fine.
FYI
Regards
Click to expand...
Click to collapse
First, thanks Bares for ansewring fast. But I am sorry to say that I did not succeed. First, I tried to simply add the line
insmod /system/lib/modules/wifi.ko
in the middle of install-recovery.sh and it didn't work out. I thought the reason was that I did not add the wiki.ko file to /system/lib/modules in the generated zip and started to look for it. I found the following the stock wifi modules from here. I got the modules from the x10_gb_stock_wifi_modules.zip file and added them to my tweaked INIT.D zip but it didn't work out. Anything that I am missing?
pjssilva said:
First, thanks Bares for ansewring fast. But I am sorry to say that I did not succeed. First, I tried to simply add the line
insmod /system/lib/modules/wifi.ko
in the middle of install-recovery.sh and it didn't work out. I thought the reason was that I did not add the wiki.ko file to /system/lib/modules in the generated zip and started to look for it. I found the following the stock wifi modules from here. I got the modules from the x10_gb_stock_wifi_modules.zip file and added them to my tweaked INIT.D zip but it didn't work out. Anything that I am missing?
Click to expand...
Click to collapse
Hmmm..., this problem could be happened if the rom wasn't settled properly too.
So, please try these steps (exactly) :
- Revert back to stock and setup the phone.
- Root it with the latest Flashtool and choose SuperSU !!!
- Install Xrecovery and let the rom settled first !!!
- Check an everything including wifi !!!.
- If its all working good then flash my script (see the thread for the latest one) through xrecovery and dont get rush on the first 2~3 reboot.
- And check the result.
Regards
It still does not work
Bares said:
Hmmm..., this problem could be happened if the rom wasn't settled properly too.
So, please try these steps (exactly) :
- Revert back to stock and setup the phone.
- Root it with the latest Flashtool and choose SuperSU !!!
- Install Xrecovery and let the rom settled first !!!
- Check an everything including wifi !!!.
- If its all working good then flash my script (see the thread for the latest one) through xrecovery and dont get rush on the first 2~3 reboot.
- And check the result.
Regards
Click to expand...
Click to collapse
I tried as you suggested and it didn't work. I tried both with your V4 scripts and with my modified version to include the "insmod /system/lib/modules/wiki.ko". Both did not work after some time to settle the original ROM (with 3 reboots) and some time to settle the modified ROM (3 more reboots).
I have also tried your new STOCK-GB-MOD-RELOAD.zip update file, but it didn't work either.
One thing I noticed is that your original update files delete the wifi.ko module from the /system/lib/modules directory that exists in the stock ROM. I even copied wifi.ko to my computer and cried an small zip that can be flashed by xrecovery to restore that file, but it is not enough to get it working. I tried to read your INIT-D-RUNNER-TWEAKS-V4 to see what it was doing but I did not understand how it changes wifi (I could not even find out where wiki.ko wasw being deleted).
It is a really shame, as your new STOCK-GB-MOD-RELOAD.zip looks exactly as what I wanted.
Anything else I should try?
pjssilva said:
I tried as you suggested and it didn't work. I tried both with your V4 scripts and with my modified version to include the "insmod /system/lib/modules/wiki.ko". Both did not work after some time to settle the original ROM (with 3 reboots) and some time to settle the modified ROM (3 more reboots).
I have also tried your new STOCK-GB-MOD-RELOAD.zip update file, but it didn't work either.
One thing I noticed is that your original update files delete the wifi.ko module from the /system/lib/modules directory that exists in the stock ROM. I even copied wifi.ko to my computer and cried an small zip that can be flashed by xrecovery to restore that file, but it is not enough to get it working. I tried to read your INIT-D-RUNNER-TWEAKS-V4 to see what it was doing but I did not understand how it changes wifi (I could not even find out where wiki.ko wasw being deleted).
It is a really shame, as your new STOCK-GB-MOD-RELOAD.zip looks exactly as what I wanted.
Anything else I should try?
Click to expand...
Click to collapse
Hi bro,
The last options is by remove these 2 lines below from instal-recovery.sh script inside zip provided (STOCK-GB-MOD-RELOAD.zip) :
HTML:
#init.d runner
busybox run-parts /system/etc/init.d/
BUT, ... the problem is : you will lost init.d runner for Stock Kernel, and it cause all tweaks will not run for sure.
The result is the rom will feel a bit slower than it should be.
Note : To be honest, i'm little bit confusing here, because everything should be fine.
OR : Use custom kernel for Locked Bootloader ( Doomkernel V6 for Locked Bootloader).
OR :
Just simply unlock the bootloader (it's really safe, but you have to follow the proper procedure on this), the simply procedure is :
- Revert back to Stock Rom using PC Companion or SEUS or Flashtool (Download the latest Flashtool Version (see the thread about how to unlock for more detail info, read it carefully!!!)., and then unlock your bootloader using this Flashtool.
Note :
Don't assume if got doubt about this.
- Flash custom kernel using above Flashtool (DoomKernel V6 integrated Bootmanager V2 Auto Rooted by Championswimmer is my recommendation) , because it's using Original Sony's boot splash logo.
- Flash above zip (STOCK-GB-MOD-RELOAD.zip) through Xrecovery.
- Finally you have to flash wifi modul for above kernel (find it on DoomLord's Thread).
Hope this help
Regards
Intalling another kernel does not work...
Hi,
I had a version with a prestine Stock + STOCK-GB-MOD-RELOAD.zip[/B] through Xrecovery. And I installed championswimmer kernel on top of it (thinking it would restore wi-fi) and it didn't work. That is realluy strange. I am starting to fear that the problem is with my X10 (it has some odd behaviors, like it always become slow when using a Ferakernel).
I'll try your first suggestion (turn off init.d scripts) and let you know how it went here.
Anyhow, great thanks!
Improvement
pjssilva said:
Hi,
I had a version with a prestine Stock + STOCK-GB-MOD-RELOAD.zip[/B] through Xrecovery. And I installed championswimmer kernel on top of it (thinking it would restore wi-fi) and it didn't work. That is realluy strange. I am starting to fear that the problem is with my X10 (it has some odd behaviors, like it always become slow when using a Ferakernel).
I'll try your first suggestion (turn off init.d scripts) and let you know how it went here.
Anyhow, great thanks!
Click to expand...
Click to collapse
I tried to turn off init.d scripts and it didn't work!
It was getting into my nerves. So I decided to look inside your INIT-D-RUNNER-TWEAKS-V4.zip file to see if something was weird to me. I am an old Linux desktop user and it looked very strange a line in the update-script script inside META-INF/com/google/android:
delete_recursive SYSTEM:etc/init.d
This woudl delete the whole /etc/init.d directory, somthing that looks very dangerous from a desktop user. So I just commented it and created a new zip file (allowing the copy of your custom init.d scripts, just avoid the full deletion before hand). I was sure it would not work, but it did... Wifi is working after I install this new zip.
I plan now to take a close look at exactly what files are being deleted to find out what should remain in order to keep wifi working in my phone. I'll let you know when I get it right. Now I have to leave as real life is calling me!
I found a solution
I found the problem an the solution.
Just after installing the stock rom, rooting, and installing xrecovery, there is a single file in /system/etc/init.d. It is called 00modules (see attachment). It looks like it create symlinks from the currect kernel modules to /system/lib/modules. This file is essential to get wifi working in my X10.
Since Bare's mods, like STOCK-GB-MOD-RELOAD.zip, delete all the files in there I end up without wifi after installing them.
The solution is simple. Just add this file to STOCK-GB-MOD-RELOAD.zip in "system/etc/init.d". It will them be copied back after being erased. Wifi works and I get Bare's mod fully functional.
Thanks Bares fo your mod!
pjssilva said:
I found the problem an the solution.
Just after installing the stock rom, rooting, and installing xrecovery, there is a single file in /system/etc/init.d. It is called 00modules (see attachment). It looks like it create symlinks from the currect kernel modules to /system/lib/modules. This file is essential to get wifi working in my X10.
Since Bare's mods, like STOCK-GB-MOD-RELOAD.zip, delete all the files in there I end up without wifi after installing them.
The solution is simple. Just add this file to STOCK-GB-MOD-RELOAD.zip in "system/etc/init.d". It will them be copied back after being erased. Wifi works and I get Bare's mod fully functional.
Thanks Bares fo your mod!
Click to expand...
Click to collapse
Oooops, OMG i really really... forgot to include it, i though i was .
Really sorry, will update my script immediately, thanks you so much bro :good:.
Best Regards
[email protected]
---------- Post added at 07:49 AM ---------- Previous post was at 07:38 AM ----------
pjssilva said:
I tried to turn off init.d scripts and it didn't work!
It was getting into my nerves. So I decided to look inside your INIT-D-RUNNER-TWEAKS-V4.zip file to see if something was weird to me. I am an old Linux desktop user and it looked very strange a line in the update-script script inside META-INF/com/google/android:
delete_recursive SYSTEM:etc/init.d
This woudl delete the whole /etc/init.d directory, somthing that looks very dangerous from a desktop user. So I just commented it and created a new zip file (allowing the copy of your custom init.d scripts, just avoid the full deletion before hand). I was sure it would not work, but it did... Wifi is working after I install this new zip.
I plan now to take a close look at exactly what files are being deleted to find out what should remain in order to keep wifi working in my phone. I'll let you know when I get it right. Now I have to leave as real life is calling me!
Click to expand...
Click to collapse
I create this line below :
delete_recursive SYSTEM:etc/init.d
Just to make sure no additional tweaks on init.d (and this is for users that don't want to fresh install the rom) , so the rom will 100% run with my files, just is't.
BTW, thanks a lot for the finding bro :good:. I have update my script to the FINAL one (see my thread), and it seem will be no more update after this one.
FYI
Best Regards
On your Xperia U you have to delete those files with a root file explorer:
/system/bin/recovery.tar
/system/bin/chargemon
/system/bin/charger
/system/xbin/sh
This is not the most awesome tip on xda, but it may be useful for newbies =)
Want to know how I found that out?
I searched this on google and everybody said that uninstalling clockworkmod is impossible.. THEY WERE WRONG!
On Xperia X8 I had to install XRecovery manually by rooting and CnP-ing files with a root file explorer..
Xperia U CWM installers do the same thing automatically via ADB..
So I thought this: If CnP-ing files installs CWM, then theoretically deleting those files should uninstall CWM..
Then I made a nandroid with CWM (ironically xD), booted to android and deleted those files with Solid Explorer..
Final test: Turned it off, turned it on, pressed volume- continuously and CWM didn't show up, but android booted up with no problems! =D
NeriL said:
On your Xperia U you have to delete those files with a root file explorer:
/system/bin/recovery.tar
/system/bin/chargemon
/system/bin/charger
/system/xbin/sh
This is not the most awesome tip on xda, but it may be useful for newbies =)
Want to know how I found that out?
I searched this on google and everybody said that uninstalling clockworkmod is impossible.. THEY WERE WRONG!
On Xperia X8 I had to install XRecovery manually by rooting and CnP-ing files with a root file explorer..
Xperia U CWM installers do the same thing automatically via ADB..
So I thought this: If CnP-ing files installs CWM, then theoretically deleting those files should uninstall CWM..
Then I made a nandroid with CWM (ironically xD), booted to android and deleted those files with Solid Explorer..
Final test: Turned it off, turned it on, pressed volume- continuously and CWM didn't show up, but android booted up with no problems! =D
Click to expand...
Click to collapse
Don't delete them! Replace them with stock files (On ics you can do that...on jb and other custom roms there is no reason for unistalling it and you can't!) These files are there for a reason!
mm
++
step by step process needed
Andrewasth said:
Don't delete them! Replace them with stock files (On ics you can do that...on jb and other custom roms there is no reason for unistalling it and you can't!) These files are there for a reason!
Click to expand...
Click to collapse
Everything worked fine for me, but I'll ask anyways.. Which is the correct procedure?
NeriL said:
Everything worked fine for me, but I'll ask anyways.. Which is the correct procedure?
Click to expand...
Click to collapse
When you install cwm from atis it will replace some modules (chargemon) which are needed! Try to charge your phone offline when you have it deleted...I doubt it will work
Andrewasth said:
When you install cwm from atis it will replace some modules (chargemon) which are needed! Try to charge your phone offline when you have it deleted...I doubt it will work
Click to expand...
Click to collapse
What does atis stand for?
Tried to charge while turned off.. Phone booted to Android automatically and charged.. I'll upload original files for xperia u GB and ICS stock roms as soon as I can!
Thanks for pointing that out.. I didn't realize about that
NeriL said:
What does atis stand for?
Tried to charge while turned off.. Phone booted to Android automatically and charged.. I'll upload original files for xperia u GB and ICS stock roms as soon as I can!
Thanks for pointing that out.. I didn't realize about that
Click to expand...
Click to collapse
atis is the user that ported cm9 on locked bootloaders and cwm on lockd bls. Just upload them from ics. Our devices don't have a dedicated recovery partition and that's why those files where used to "pack" cwm!
Sorry for being late.. This is what you have to do to remove recovery ON STOCK ICS
File needed is extracted from 6.1.1.B.1.100, but it may work for other stock ICS compilation
Delete:
/system/bin/recovery.tar
/system/bin/charger
/system/xbin/sh
Download attached file and unzip it. Go into a root file browser (or adb) and replace
/system/bin/chargemon
with the downloaded one!
Procedure FOR STOCK GB is the same as ICS, but using the file attached in THIS post..
File was extracted from stock GB 6.0.B.3.184.. It may work for other GB compilations..