[Q] ST15i WiFi problem!! - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

I've installed Jelly Vanilla Z 6.1 on FXP213 cm10 20130329 UNOFFICIAL smultron and WiFi won't turn on. Just screen ''Turning Wi-Fi on...''. What can I do to fix that?

Instal Wifi modules for you kernel a reboot (twice)

SalyczeQ said:
Instal Wifi modules for you kernel a reboot (twice)
Click to expand...
Click to collapse
How, can you explane me step by step, because I don't want to do something wrong?
Thank you soooo much! :fingers-crossed:

Melanija said:
How, can you explane me step by step, because I don't want to do something wrong?
Thank you soooo much! :fingers-crossed:
Click to expand...
Click to collapse
Goto the page from where you've downloaded the kernel, there must be a link for downloading wifi modules, download them, place them on ur sdcard and install them through recovery.
If theres no wifi modules, u can install another kernel, lyk 'Lupus JB'.
Sorry for my bad English.
Hit 'thanks' if i helped you.
Sent from public phone using coins.

pankaj.gaikar said:
Goto the page from where you've downloaded the kernel, there must be a link for downloading wifi modules, download them, place them on ur sdcard and install them through recovery.
If theres no wifi modules, u can install another kernel, lyk 'Lupus JB'.
Sorry for my bad English.
Hit 'thanks' if i helped you.
Sent from public phone using coins.
Click to expand...
Click to collapse
Problem is still there. I've installed same kernel again and sd card was damaged, after that I make backup and formatting and install cm10xtended by Hikari and flash modules. An my card again damaged and Wi-Fi won't work and I don't konw what else to do. I think if I flash another kernel ( like Lupus) again the problem will still exist. Do you think that the problem is in the JV Z? Please help me! :crying:

Melanija said:
Problem is still there. I've installed same kernel again and sd card was damaged, after that I make backup and formatting and install cm10xtended by Hikari and flash modules. An my card again damaged and Wi-Fi won't work and I don't konw what else to do. I think if I flash another kernel ( like Lupus) again the problem will still exist. Do you think that the problem is in the JV Z? Please help me! :crying:
Click to expand...
Click to collapse
hi, i got a similar problem with my smultron so i would be interested if you found a solution.
i figured out that in stock based rom (and kernel) the wifi works, in different cm builds it doesnt. i tried different kernels (even some i already got the wifi working) but nothing helped. For this kernels i didn't have to flash any modules ( the description said that i don't have to...(already included!?)).
I have to admit, that i don't know much about all this stuff, so i would really appreciate if someone could give me a hint about what to do
thanks allot!

Hmmmm...do this step....
1.using any file explorer with ROOT excess, go and delete....
a. /data/local/tmp
2.Then copy and paste all files from roms that you're using right now (flashable zip)....
a./system/lib/modules (flashable zip) to your phone /system/lib/modules (replaced all files with proper permission rwxr-xr-x)
3.delete other files that is not been replaced (can be identified by look at the date of the files/delete files that have old date)
4.exit the file explorer, turn of your phone and boot into fastboot....
5.flash any kernel you desire....
6.your wifi will fixed after that....

ah... i'm really sorry i didn't see your reply till now
didn't try your solution, but it the end i got it working again. don't remember how
anyway, thanks allot for your help!!!
iPusak Gaoq™ said:
Hmmmm...do this step....
1.using any file explorer with ROOT excess, go and delete....
a. /data/local/tmp
2.Then copy and paste all files from roms that you're using right now (flashable zip)....
a./system/lib/modules (flashable zip) to your phone /system/lib/modules (replaced all files with proper permission rwxr-xr-x)
3.delete other files that is not been replaced (can be identified by look at the date of the files/delete files that have old date)
4.exit the file explorer, turn of your phone and boot into fastboot....
5.flash any kernel you desire....
6.your wifi will fixed after that....
Click to expand...
Click to collapse

Related

[Q] [mini pro] from GingerDX v17 on stock to zombie [Solved]

Hi guys,
This is my very first post on XDA.
I've spent a lot of time parsing and looking for answers (too much if you ask my wife ) I'm no more feeling "alone" when I read all this people going mad for their phones
I managed to unlock my mini pro and install GingerDX v17 without any problem. Now I'd like to use a custom kernel (zombie), but as I installed the modules, I suppose I have to remove them before flashing the new kernel.
I'm looking for some hints and advices to be sure I do not brick my phone and follow all the good steps.
What I'm planning to do:
Delete the modules and files present in the zip I flashed (through command line of SDK, right ?)
Download the new kernel and place it in SD (well, follow the zombie thread instructions...)
Reboot in recovery (and do full wipe ?)
Flash the new kernel
Reboot
My phone specs:
X10 mini pro
Stock kernel
GingerDX v17
CMparts fix flashed
GingerDX modules flashed
Thank you for your help and suggestions.
Tim
PS:
I'm not sorry for my bad English as it's written we don't have to write it, right
your going somewhat right but follow these steps:
1) Delete the modules u flashed from the ginger-dx_module pack(for stock) from /system/lib/modules with root explorer
modules present :
cy8ctma300_ser.ko
ext3.ko
ext4.ko
jbd2.ko
jbd.ko
smartass.ko
x8mddi.ko
x8oc.ko OR U can directly flash the ROM zip which u downloaded without the modules but do not make factory reset or any wipe..
2)Download kernel on PC.. Open using Winrar or any zip.. you will find X10 Mini Pro_Zombie Panic Kernel v1.6.3_slade87.ftf file.. place the it in the /firmwares folder in flashtool..
3)turn off ur phone
4)Run the flashtool from PC select the kernel [ zombie panik] from list. it will ask you to connect phone in flash mode
5)so press the back button on phone and then connect using USB.. then the kernel will be flashed and u will be said to disconnect and reboot your phone..
6)your done
hope it helps..
Hey,
It took me more time to find a good root file explorer than flashing the new kernel. Finally ES Explorer did the work (after ticking root option in settings).
My phone is sooooooooooooo more reactiv ! Impressive.
Thank you faiyyaz for your help.
Tim
TimMayle said:
Hey,
It took me more time to find a good root file explorer than flashing the new kernel. Finally ES Explorer did the work (after ticking root option in settings).
My phone is sooooooooooooo more reactiv ! Impressive.
Thank you faiyyaz for your help.
Tim
Click to expand...
Click to collapse
no probs mate.. incase u want a good root explorer [which i prefer] here's the link in market
https://market.android.com/details?id=com.speedsoftware.rootexplorer&hl=en
quite useful and user friendly..

Simple fix for Wifi error

For anyone who flashed a kernel or ROM and broke Wifi, this fix worked for me. You will need Root Explorer or some other file manager that can R/W /system/. Go into /system/lib/modules and delete bcm4330.ko. Grab the attached bcm4330.zip, extract the .ko file, copy it over to your phone, then use Root Explorer to drop it into /system/lib/modules. Finally, reboot.
Brought my wifi back after flashing Ziggy's kernel using Con247's easy kernel flash method and losing wifi.
bast525 said:
For anyone who flashed a kernel or ROM and broke Wifi, this fix worked for me. You will need Root Explorer or some other file manager that can R/W /system/. Go into /system/lib/modules and delete bcm4330.ko. Grab the attached bcm4330.zip, extract the .ko file, copy it over to your phone, then use Root Explorer to drop it into /system/lib/modules. Finally, reboot.
Brought my wifi back after flashing Ziggy's kernel using Con247's easy kernel flash method and losing wifi.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=20990402&postcount=2
Download the non PH98IMG.zip in that post and flash it in recovery. Does the same thing but is automated.
hi,
cant find the zip data. can you upload it? or the file directly. Please
and hope it works for me too
Bessani said:
hi,
cant find the zip data. can you upload it? or the file directly. Please
and hope it works for me too
Click to expand...
Click to collapse
why don't you try looking in the zip for the rom that you use
wifi
con247 said:
http://forum.xda-developers.com/showpost.php?p=20990402&postcount=2
Download the non PH98IMG.zip in that post and flash it in recovery. Does the same thing but is automated.
Click to expand...
Click to collapse
wow am I glad to stumble on this. I flashed cleanrom 4.5 in June and lost Wifi and have been told to flash this same file. I have it on my sd but can't for the life of me get it to load. Can you please provide some step by step so i can see what i'm missing. thanks so much.
What do you mean by "attached .bcm4330.zip", I can't find this file. Was there a file previously attached to this post? If so could someone supply it please
Thanks in advance. :good:
FINIZLE said:
What do you mean by "attached .bcm4330.zip", I can't find this file. Was there a file previously attached to this post? If so could someone supply it please
Thanks in advance. :good:
Click to expand...
Click to collapse
+1

[Q] Wi-Fi problems when trying to use Bares' Init.d Scripts Using Stock Kernel (V3)

I am trying to go back to stock ROM and use the Bares' Init.d Scripts Using Stock Kernel (V3).
I reflashed the stock GB ROM using flashtool, rooted and installed xrecovery 0.3. After that, I installed Bares' INIT-D-RUNNER-TWEAKS-V3.zip using xrecovery and rebooted. When ever I try to use wifi I get "Error" just below the toggle to turn it on and i does not work.
It seems like someone else had this problem, but Bares says tha wifi errors shouldn't happen, see:
http://forum.xda-developers.com/showthread.php?t=2174564&highlight=wifi
I tried reinstalling three times (install original ROM and after that apply the Init.d scripts) in an unlocked bootloader X10. I then relocked the boot loader and tried again and I still get wifi problems.
Anyone else having problems like this? Is there a work around?
Obs: I could not post in the original threas as I am a newbie here and I am not allowed to post in the development section.
pjssilva said:
I am trying to go back to stock ROM and use the Bares' Init.d Scripts Using Stock Kernel (V3).
I reflashed the stock GB ROM using flashtool, rooted and installed xrecovery 0.3. After that, I installed Bares' INIT-D-RUNNER-TWEAKS-V3.zip using xrecovery and rebooted. When ever I try to use wifi I get "Error" just below the toggle to turn it on and i does not work.
It seems like someone else had this problem, but Bares says tha wifi errors shouldn't happen, see:
http://forum.xda-developers.com/showthread.php?t=2174564&highlight=wifi
I tried reinstalling three times (install original ROM and after that apply the Init.d scripts) in an unlocked bootloader X10. I then relocked the boot loader and tried again and I still get wifi problems.
Anyone else having problems like this? Is there a work around?
Obs: I could not post in the original threas as I am a newbie here and I am not allowed to post in the development section.
Click to expand...
Click to collapse
Hi bro, we need to edit install-recovery.sh script inside zip to include wifi module, please refer to HERE.
So, please use this zip, just flash it through Xrecovery, then it should be fine.
FYI
Regards
It didn't work out
Bares said:
Hi bro, we need to edit install-recovery.sh script inside zip to include wifi module, please refer to HERE.
So, please use this zip, just flash it through Xrecovery, then it should be fine.
FYI
Regards
Click to expand...
Click to collapse
First, thanks Bares for ansewring fast. But I am sorry to say that I did not succeed. First, I tried to simply add the line
insmod /system/lib/modules/wifi.ko
in the middle of install-recovery.sh and it didn't work out. I thought the reason was that I did not add the wiki.ko file to /system/lib/modules in the generated zip and started to look for it. I found the following the stock wifi modules from here. I got the modules from the x10_gb_stock_wifi_modules.zip file and added them to my tweaked INIT.D zip but it didn't work out. Anything that I am missing?
pjssilva said:
First, thanks Bares for ansewring fast. But I am sorry to say that I did not succeed. First, I tried to simply add the line
insmod /system/lib/modules/wifi.ko
in the middle of install-recovery.sh and it didn't work out. I thought the reason was that I did not add the wiki.ko file to /system/lib/modules in the generated zip and started to look for it. I found the following the stock wifi modules from here. I got the modules from the x10_gb_stock_wifi_modules.zip file and added them to my tweaked INIT.D zip but it didn't work out. Anything that I am missing?
Click to expand...
Click to collapse
Hmmm..., this problem could be happened if the rom wasn't settled properly too.
So, please try these steps (exactly) :
- Revert back to stock and setup the phone.
- Root it with the latest Flashtool and choose SuperSU !!!
- Install Xrecovery and let the rom settled first !!!
- Check an everything including wifi !!!.
- If its all working good then flash my script (see the thread for the latest one) through xrecovery and dont get rush on the first 2~3 reboot.
- And check the result.
Regards
It still does not work
Bares said:
Hmmm..., this problem could be happened if the rom wasn't settled properly too.
So, please try these steps (exactly) :
- Revert back to stock and setup the phone.
- Root it with the latest Flashtool and choose SuperSU !!!
- Install Xrecovery and let the rom settled first !!!
- Check an everything including wifi !!!.
- If its all working good then flash my script (see the thread for the latest one) through xrecovery and dont get rush on the first 2~3 reboot.
- And check the result.
Regards
Click to expand...
Click to collapse
I tried as you suggested and it didn't work. I tried both with your V4 scripts and with my modified version to include the "insmod /system/lib/modules/wiki.ko". Both did not work after some time to settle the original ROM (with 3 reboots) and some time to settle the modified ROM (3 more reboots).
I have also tried your new STOCK-GB-MOD-RELOAD.zip update file, but it didn't work either.
One thing I noticed is that your original update files delete the wifi.ko module from the /system/lib/modules directory that exists in the stock ROM. I even copied wifi.ko to my computer and cried an small zip that can be flashed by xrecovery to restore that file, but it is not enough to get it working. I tried to read your INIT-D-RUNNER-TWEAKS-V4 to see what it was doing but I did not understand how it changes wifi (I could not even find out where wiki.ko wasw being deleted).
It is a really shame, as your new STOCK-GB-MOD-RELOAD.zip looks exactly as what I wanted.
Anything else I should try?
pjssilva said:
I tried as you suggested and it didn't work. I tried both with your V4 scripts and with my modified version to include the "insmod /system/lib/modules/wiki.ko". Both did not work after some time to settle the original ROM (with 3 reboots) and some time to settle the modified ROM (3 more reboots).
I have also tried your new STOCK-GB-MOD-RELOAD.zip update file, but it didn't work either.
One thing I noticed is that your original update files delete the wifi.ko module from the /system/lib/modules directory that exists in the stock ROM. I even copied wifi.ko to my computer and cried an small zip that can be flashed by xrecovery to restore that file, but it is not enough to get it working. I tried to read your INIT-D-RUNNER-TWEAKS-V4 to see what it was doing but I did not understand how it changes wifi (I could not even find out where wiki.ko wasw being deleted).
It is a really shame, as your new STOCK-GB-MOD-RELOAD.zip looks exactly as what I wanted.
Anything else I should try?
Click to expand...
Click to collapse
Hi bro,
The last options is by remove these 2 lines below from instal-recovery.sh script inside zip provided (STOCK-GB-MOD-RELOAD.zip) :
HTML:
#init.d runner
busybox run-parts /system/etc/init.d/
BUT, ... the problem is : you will lost init.d runner for Stock Kernel, and it cause all tweaks will not run for sure.
The result is the rom will feel a bit slower than it should be.
Note : To be honest, i'm little bit confusing here, because everything should be fine.
OR : Use custom kernel for Locked Bootloader ( Doomkernel V6 for Locked Bootloader).
OR :
Just simply unlock the bootloader (it's really safe, but you have to follow the proper procedure on this), the simply procedure is :
- Revert back to Stock Rom using PC Companion or SEUS or Flashtool (Download the latest Flashtool Version (see the thread about how to unlock for more detail info, read it carefully!!!)., and then unlock your bootloader using this Flashtool.
Note :
Don't assume if got doubt about this.
- Flash custom kernel using above Flashtool (DoomKernel V6 integrated Bootmanager V2 Auto Rooted by Championswimmer is my recommendation) , because it's using Original Sony's boot splash logo.
- Flash above zip (STOCK-GB-MOD-RELOAD.zip) through Xrecovery.
- Finally you have to flash wifi modul for above kernel (find it on DoomLord's Thread).
Hope this help
Regards
Intalling another kernel does not work...
Hi,
I had a version with a prestine Stock + STOCK-GB-MOD-RELOAD.zip[/B] through Xrecovery. And I installed championswimmer kernel on top of it (thinking it would restore wi-fi) and it didn't work. That is realluy strange. I am starting to fear that the problem is with my X10 (it has some odd behaviors, like it always become slow when using a Ferakernel).
I'll try your first suggestion (turn off init.d scripts) and let you know how it went here.
Anyhow, great thanks!
Improvement
pjssilva said:
Hi,
I had a version with a prestine Stock + STOCK-GB-MOD-RELOAD.zip[/B] through Xrecovery. And I installed championswimmer kernel on top of it (thinking it would restore wi-fi) and it didn't work. That is realluy strange. I am starting to fear that the problem is with my X10 (it has some odd behaviors, like it always become slow when using a Ferakernel).
I'll try your first suggestion (turn off init.d scripts) and let you know how it went here.
Anyhow, great thanks!
Click to expand...
Click to collapse
I tried to turn off init.d scripts and it didn't work!
It was getting into my nerves. So I decided to look inside your INIT-D-RUNNER-TWEAKS-V4.zip file to see if something was weird to me. I am an old Linux desktop user and it looked very strange a line in the update-script script inside META-INF/com/google/android:
delete_recursive SYSTEM:etc/init.d
This woudl delete the whole /etc/init.d directory, somthing that looks very dangerous from a desktop user. So I just commented it and created a new zip file (allowing the copy of your custom init.d scripts, just avoid the full deletion before hand). I was sure it would not work, but it did... Wifi is working after I install this new zip.
I plan now to take a close look at exactly what files are being deleted to find out what should remain in order to keep wifi working in my phone. I'll let you know when I get it right. Now I have to leave as real life is calling me!
I found a solution
I found the problem an the solution.
Just after installing the stock rom, rooting, and installing xrecovery, there is a single file in /system/etc/init.d. It is called 00modules (see attachment). It looks like it create symlinks from the currect kernel modules to /system/lib/modules. This file is essential to get wifi working in my X10.
Since Bare's mods, like STOCK-GB-MOD-RELOAD.zip, delete all the files in there I end up without wifi after installing them.
The solution is simple. Just add this file to STOCK-GB-MOD-RELOAD.zip in "system/etc/init.d". It will them be copied back after being erased. Wifi works and I get Bare's mod fully functional.
Thanks Bares fo your mod!
pjssilva said:
I found the problem an the solution.
Just after installing the stock rom, rooting, and installing xrecovery, there is a single file in /system/etc/init.d. It is called 00modules (see attachment). It looks like it create symlinks from the currect kernel modules to /system/lib/modules. This file is essential to get wifi working in my X10.
Since Bare's mods, like STOCK-GB-MOD-RELOAD.zip, delete all the files in there I end up without wifi after installing them.
The solution is simple. Just add this file to STOCK-GB-MOD-RELOAD.zip in "system/etc/init.d". It will them be copied back after being erased. Wifi works and I get Bare's mod fully functional.
Thanks Bares fo your mod!
Click to expand...
Click to collapse
Oooops, OMG i really really... forgot to include it, i though i was .
Really sorry, will update my script immediately, thanks you so much bro :good:.
Best Regards
[email protected]
---------- Post added at 07:49 AM ---------- Previous post was at 07:38 AM ----------
pjssilva said:
I tried to turn off init.d scripts and it didn't work!
It was getting into my nerves. So I decided to look inside your INIT-D-RUNNER-TWEAKS-V4.zip file to see if something was weird to me. I am an old Linux desktop user and it looked very strange a line in the update-script script inside META-INF/com/google/android:
delete_recursive SYSTEM:etc/init.d
This woudl delete the whole /etc/init.d directory, somthing that looks very dangerous from a desktop user. So I just commented it and created a new zip file (allowing the copy of your custom init.d scripts, just avoid the full deletion before hand). I was sure it would not work, but it did... Wifi is working after I install this new zip.
I plan now to take a close look at exactly what files are being deleted to find out what should remain in order to keep wifi working in my phone. I'll let you know when I get it right. Now I have to leave as real life is calling me!
Click to expand...
Click to collapse
I create this line below :
delete_recursive SYSTEM:etc/init.d
Just to make sure no additional tweaks on init.d (and this is for users that don't want to fresh install the rom) , so the rom will 100% run with my files, just is't.
BTW, thanks a lot for the finding bro :good:. I have update my script to the FINAL one (see my thread), and it seem will be no more update after this one.
FYI
Best Regards

[TIP] Uninstalling CWM on Xperia U (May work on other devices)

On your Xperia U you have to delete those files with a root file explorer:
/system/bin/recovery.tar
/system/bin/chargemon
/system/bin/charger
/system/xbin/sh
This is not the most awesome tip on xda, but it may be useful for newbies =)
Want to know how I found that out?
I searched this on google and everybody said that uninstalling clockworkmod is impossible.. THEY WERE WRONG!
On Xperia X8 I had to install XRecovery manually by rooting and CnP-ing files with a root file explorer..
Xperia U CWM installers do the same thing automatically via ADB..
So I thought this: If CnP-ing files installs CWM, then theoretically deleting those files should uninstall CWM..
Then I made a nandroid with CWM (ironically xD), booted to android and deleted those files with Solid Explorer..
Final test: Turned it off, turned it on, pressed volume- continuously and CWM didn't show up, but android booted up with no problems! =D
NeriL said:
On your Xperia U you have to delete those files with a root file explorer:
/system/bin/recovery.tar
/system/bin/chargemon
/system/bin/charger
/system/xbin/sh
This is not the most awesome tip on xda, but it may be useful for newbies =)
Want to know how I found that out?
I searched this on google and everybody said that uninstalling clockworkmod is impossible.. THEY WERE WRONG!
On Xperia X8 I had to install XRecovery manually by rooting and CnP-ing files with a root file explorer..
Xperia U CWM installers do the same thing automatically via ADB..
So I thought this: If CnP-ing files installs CWM, then theoretically deleting those files should uninstall CWM..
Then I made a nandroid with CWM (ironically xD), booted to android and deleted those files with Solid Explorer..
Final test: Turned it off, turned it on, pressed volume- continuously and CWM didn't show up, but android booted up with no problems! =D
Click to expand...
Click to collapse
Don't delete them! Replace them with stock files (On ics you can do that...on jb and other custom roms there is no reason for unistalling it and you can't!) These files are there for a reason!
mm
++
step by step process needed
Andrewasth said:
Don't delete them! Replace them with stock files (On ics you can do that...on jb and other custom roms there is no reason for unistalling it and you can't!) These files are there for a reason!
Click to expand...
Click to collapse
Everything worked fine for me, but I'll ask anyways.. Which is the correct procedure?
NeriL said:
Everything worked fine for me, but I'll ask anyways.. Which is the correct procedure?
Click to expand...
Click to collapse
When you install cwm from atis it will replace some modules (chargemon) which are needed! Try to charge your phone offline when you have it deleted...I doubt it will work
Andrewasth said:
When you install cwm from atis it will replace some modules (chargemon) which are needed! Try to charge your phone offline when you have it deleted...I doubt it will work
Click to expand...
Click to collapse
What does atis stand for?
Tried to charge while turned off.. Phone booted to Android automatically and charged.. I'll upload original files for xperia u GB and ICS stock roms as soon as I can!
Thanks for pointing that out.. I didn't realize about that
NeriL said:
What does atis stand for?
Tried to charge while turned off.. Phone booted to Android automatically and charged.. I'll upload original files for xperia u GB and ICS stock roms as soon as I can!
Thanks for pointing that out.. I didn't realize about that
Click to expand...
Click to collapse
atis is the user that ported cm9 on locked bootloaders and cwm on lockd bls. Just upload them from ics. Our devices don't have a dedicated recovery partition and that's why those files where used to "pack" cwm!
Sorry for being late.. This is what you have to do to remove recovery ON STOCK ICS
File needed is extracted from 6.1.1.B.1.100, but it may work for other stock ICS compilation
Delete:
/system/bin/recovery.tar
/system/bin/charger
/system/xbin/sh
Download attached file and unzip it. Go into a root file browser (or adb) and replace
/system/bin/chargemon
with the downloaded one!
Procedure FOR STOCK GB is the same as ICS, but using the file attached in THIS post..
File was extracted from stock GB 6.0.B.3.184.. It may work for other GB compilations..

[ROM] Stock OTA_T6_UL_K44_SENSE55_MR_HTC_Europe_2.61.401.3-1.54.401.1_release ROM

Dears,
I've received the OTA_T6_UL_K44_SENSE55_MR_HTC_Europe_2.61.401.3-1.54.401.1_release update, and integrated it with my ROM, and I backed it up via TWRP recovery (System/Boot)
if you want to try it , your MAX must be GSM ,it is fully functional, and stock /unrooted and without any modifications.
And it requires few simple step to install it :
1- download the file ( https://www.dropbox.com/s/r1yctvgu68jxomh/2014-03-26--18-11-42 KOT49H release-keys.zip )
2- Extract it
3- Put it in TWRP backup folder on your SDcard ( TWRP/BACKUP/FA3NK..../
4- Full wipe/ format system/ clear cache /
5- Restore
6- Enjoy!
Edit : here is the new link :
https://drive.google.com/file/d/0B8V0bDSmDRB8a2hpZkpQcF9VS1k/edit?usp=sharing
thanks .. but can you reup it somewhere else ?
link doesnt work atm
B-Man2005 said:
thanks .. but can you reup it somewhere else ?
link doesnt work atm
Click to expand...
Click to collapse
I will try to upload it somewhere else during the day , and will post the link..
mkhader said:
I will try to upload it somewhere else during the day , and will post the link..
Click to expand...
Click to collapse
i need your comfirmation to download
B-Man2005 said:
i need your comfirmation to download
Click to expand...
Click to collapse
try now , it should be fine right now
very nice thanks
but could you also upload the system\lib filder in a zip ??
i only need those files
Thanks for sharing this! Fast download from Google Drive!
Thanks for sharing this! Fast download
problem
Dear uploader.. I followed the instructions but after doing it my screen doesn't go beyond HTC logo it stucks
mumtaz0786 said:
Dear uploader.. I followed the instructions but after doing it my screen doesn't go beyond HTC logo it stucks
Click to expand...
Click to collapse
use twrp-2.6.3.0 to restore the rom
2nd problem
Dear uploader, I have installed this Rom the way you guided but problem is about platform.xml .. when I used other kit Kat custom Rom I edited permission for write external sd card but this Rom when I changed platform.xml it changes for a while but after restart it came back to default. It is rooted everything working but file doesn't change and I can't write anything on sdcard.
Im having problems doing this.. what is the exact backup folder location to restore??
young blade said:
Im having problems doing this.. what is the exact backup folder location to restore??
Click to expand...
Click to collapse
make a backup of your own rom.
check sd card
there is a folder... i think twrp
in there there will be a backup folder
in there, there will be another one... pretty cryptic ... for me its something like DHSFSFS01
in there there is your backup... you can delete it if you want or keep it
copy the folder of the rom from this thread to DHSFSFS01 or what its called on your phone...
now back in recovery you can restore both... your rom and the one you downloaded
B-Man2005 said:
make a backup of your own rom.
check sd card
there is a folder... i think twrp
in there there will be a backup folder
in there, there will be another one... pretty cryptic ... for me its something like DHSFSFS01
in there there is your backup... you can delete it if you want or keep it
copy the folder of the rom from this thread to DHSFSFS01 or what its called on your phone...
now back in recovery you can restore both... your rom and the one you downloaded
Click to expand...
Click to collapse
Okay so it has to be in the external SD.. thanks!!:good:
Dear uploader help me
Dear uploader, I have installed this Rom the way you guided but problem is about platform.xml .. when I used other kit Kat custom Rom I edited permission for write external sd card but this Rom when I changed platform.xml it changes for a while but after restart it came back to default. It is rooted everything working but file doesn't change and I can't write anything on sdcard.
mumtaz0786 said:
Dear uploader, I have installed this Rom the way you guided but problem is about platform.xml .. when I used other kit Kat custom Rom I edited permission for write external sd card but this Rom when I changed platform.xml it changes for a while but after restart it came back to default. It is rooted everything working but file doesn't change and I can't write anything on sdcard.
Click to expand...
Click to collapse
That means the system partition is write protected.
You will need to edit the file and flash it in recovery for the changes to take.
reply to dear uploader
scrosler said:
That means the system partition is write protected.
You will need to edit the file and flash it in recovery for the changes to take.
Click to expand...
Click to collapse
I know how to edit but how I can flash platform.xml file through recovery???
Can someone running this do me a favor?
adb pull /proc/config.gz
After you have it can you link me to it? Thanks...and good things come to those who help

Categories

Resources