I googled everywhere and the same problem comes up for the Axtrix 4g. Says something about use SBF to flash a stock rom. how do you do this for the Photon??? Can someone list the step? thanks
what happened? homebasephoton1.5 rom. I tried to install it but after I reboot I got failed to boot message........
It just means that the phone is unable to boot and is starting the fail-safe RSD mode... basically allowing you to use RSD Lite to flash a new SBF (basically phone image) to the phone to restore it. Are you rooted/unlocked?
mrinehart93 said:
It just means that the phone is unable to boot and is starting the fail-safe RSD mode... basically allowing you to use RSD Lite to flash a new SBF (basically phone image) to the phone to restore it. Are you rooted/unlocked?
Click to expand...
Click to collapse
I think so i used MotorolaOneClic_oot_psouza4.zip method to root my phone. Later installed root applications like Wifi Tether... Unlocked? umm Not sure I guess so. I recently installed the Alien1 custom rom. so probably.
mines is saying Failed to boot 4 Starting rsd mode its been there for at least 1 hour am i bricked or can it be fixed
retry flash the sbf file, the unlocked bootloader is a semi-brick, retry flash sbf file complete for restore phone stock build
daniel129001 said:
retry flash the sbf file, the unlocked bootloader is a semi-brick, retry flash sbf file complete for restore phone stock build
Click to expand...
Click to collapse
hey can you give me the SBF file to flash? I downloaded one but when i click start it says failed............so I'm currently downloading one off XDA but not sure if it will be the right one. thanks
Did this go anywhere? I have the same issue but my phone is now dead, and when I plug it on the charger it automatically starts and goes to this screen even though I dont turn it on.
After you charge your phone(instructions in other thread) flash 154 first then newest. Make sure to charge between
Sent from my MB855 using XDA App
Flash what? I am using this: 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf
That's the newest, download the 154 one and flashed it after manually charging your phone. Then flash that one
Nickdroid86 said:
Flash what? I am using this: 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
I havent been able to find that file. Also Im not sure which method I should charge my phone If you read my other post it explains why I say that.
nobody knows what to do??????
Fix
Nickdroid86 said:
nobody knows what to do??????
Click to expand...
Click to collapse
Sorry that I didn't reply any sooner. This is what I did, since when the phone is with that problem won't charge the battery nor with charger nor with USB, so, I ran out of juice... I had to get an universal charger to charge the battery and then I flash it with RSD. I've flashed this file 154_5 sbf, once I got in, I flashed the updated one. It worked pretty good.
Let me know, regards.
when I am flashing sbf I have to remove my external sd card otherwise it wont work at all.
I changed to Alien Rom.after changing to alien rom I was facing a lot of FCs.So tried RSD lite with latest SBF.Now I am stuck at "Failed to boot 4 starting RSD mode"
From what I read from forums my phone is soft bricked.
"Failed to boot 4" is when a filesystem is missing a signature
The solution is to flash 154 sbf using RSDlite 5.5 version with a fully charged battery using the usb at the back of your computer.
Once you are successful flashing 154 you can update with latest SBF.
The important points are below.
1. Fully charged battery. (use an external battery charger as Photon does not charge batery in boot mode.
2. Used RSDlite 5.5 version
3. Use USB at back.
4. Use 154 not the latest version of SBF.
5. Make sure the process is not interrupted until the process is completed
Failed to boot 2
Im having the same problem and reflashing 154-5 doesnt work. Instead phone says "SVF:106:1:2
sec_execption: b655, eddc, eb.
It always fails on flash and re-enumeration.
hello
mrinehart93 said:
It just means that the phone is unable to boot and is starting the fail-safe RSD mode... basically allowing you to use RSD Lite to flash a new SBF (basically phone image) to the phone to restore it. Are you rooted/unlocked?
Click to expand...
Click to collapse
yes i have rooted my motorola photon, but he is working fine, today (15/07/12) I have searched update from phone update option after downloading update file he is start & off continue and giving error " failed to boot 2" - starting RSD mode.
Please help me
I am also having the same prob. made an OTA update to 254 and it got locked bootloader.
tried fastboot method and now getting Failed to boot 2 error. tried 154, 198_6 etc. no luck.
Motorola really screwed a lot of photon 4G users. for what?
parvezkhan.157 said:
yes i have rooted my motorola photon, but he is working fine, today (15/07/12) I have searched update from phone update option after downloading update file he is start & off continue and giving error " failed to boot 2" - starting RSD mode.
Please help me
Click to expand...
Click to collapse
just see what you can do by visiting this thread. no guarantees.
Related
I was trying to flash my phone with Cherry blur. I was going from Gingerblur to Cherry blur. I probably done something very wrong. After flashing the phone wouldnt boot. It just stuck at the motorola dual core logo with the "failed to boot 4 starting RSD mode" message on the top left side corner. Anyone know how to fix it this? thanks in advance.
I had the same problem (not by doing the same thing, but the same message message anyway), don't worry it is just a "soft brick", you can use RSD lite (5.10) to flash a stock SBF (or another one).
You should search this forum. Stock SBF can be found in the dev thread.
If I am wrong I hope someone will correct me.
arachneon said:
I had the same problem (not by doing the same thing, but the same message message anyway), don't worry it is just a "soft brick", you can use RSD lite (5.10) to flash a stock SBF (or another one).
You should search this forum. Stock SBF can be found in the dev thread.
If I am wrong I hope someone will correct me.
Click to expand...
Click to collapse
+1 that should do the trick.
Sent from my MB860 using XDA Premium App
IF YOU ARE UNLOCKED MAKE SURE YOU FLASH 2.3.4 SBF WITH PUDDING OR YOU MIGHT HARDBRICK!!!!
DO NOT FLASH BACK TO 1.8.3!!!!
lol, can't be overly careful with this things.
Now im facing another issue. My battery is low and it say "the battery is too low to do a flash" or something like that. Could i still flash it? I tried to charge it for couple hours but everytime i connected the phone to charger it turn on by itself and the srceen on the whole time saying failed to boot 4 ...
xploited said:
IF YOU ARE UNLOCKED MAKE SURE YOU FLASH 2.3.4 SBF WITH PUDDING OR YOU MIGHT HARDBRICK!!!!
DO NOT FLASH BACK TO 1.8.3!!!!
lol, can't be overly careful with this things.
Click to expand...
Click to collapse
Thanks. Unlocked u mean by carrier unlocked or boot loader unlocked? My phone is carrier unlocked to use with tmobile but i dont know if its bootloader unlocked. The last time the phone was on gingerblur 3.5 if it matter. Thanks
Bump. Should i flash with or without pudding?
If you were on GingerBlur that pretty much means that you did not update to 2.3.4 via OTA updates.
And since you did not update via OTA, you will NOT hard brick your phone
Same thing happened to me... GinglerBlur to CherryBlur = Failed to Boot 4
See this thread:
http://forum.xda-developers.com/showthread.php?p=16332003
oocutioo said:
Bump. Should i flash with or without pudding?
Click to expand...
Click to collapse
Could you clarify what steps exactly did you do to get to the "Failed to boot Error.."?
This will help people help you more accurately.
oocutioo said:
Thanks. Unlocked u mean by carrier unlocked or boot loader unlocked? My phone is carrier unlocked to use with tmobile but i dont know if its bootloader unlocked. The last time the phone was on gingerblur 3.5 if it matter. Thanks
Click to expand...
Click to collapse
I meant Bootloader Unlocked. Gingerblur is a P-ROM so looks like you didn't unlock the bootloader to use it.
If you have the failed to boot error, i would do rsf flash of 2.3.4 with pudding.
If you can boot into Gingerblur, i would first flash a pudding sbf for your phone, do the unlock bootloader commands, installed CWM, and from there modding is a breeze.
oocutioo said:
Now im facing another issue. My battery is low and it say "the battery is too low to do a flash" or something like that. Could i still flash it? I tried to charge it for couple hours but everytime i connected the phone to charger it turn on by itself and the srceen on the whole time saying failed to boot 4 ...
Click to expand...
Click to collapse
I have the same problem
you have a solution
help !
mrill said:
I have the same problem
you have a solution
help !
Click to expand...
Click to collapse
Same problem!...
Seems the battery cannot be charged when screen says "failed to boot"
I saw a solution
by sacrificing a USB cable .. by opening the cable just put the red wire on the + symbol on the phone with battery to make it appear that he has the atrix is fully charged
sorry for my english
oocutioo said:
Now im facing another issue. My battery is low and it say "the battery is too low to do a flash" or something like that. Could i still flash it? I tried to charge it for couple hours but everytime i connected the phone to charger it turn on by itself and the srceen on the whole time saying failed to boot 4 ...
Click to expand...
Click to collapse
Unfortuately for us, the not so bright people who designed the motorola flashing interface designed it so that the device will not charge unless booted into an OS. To get past this screen, you must find another user with an atrix, and place your battery into that phone until it is charged and try again.
If this is not an option, try the display model at the AT&T store (what I did ) or try purchasing a Dev-cable that will charge the device.
a solution with a universal battery charger, found on the web
wugeo said:
Same problem!...
Seems the battery cannot be charged when screen says "failed to boot"
Click to expand...
Click to collapse
I solved it by buying a generic battery with charging dock that can also charge thr oem battery for $8 off ebay. Now im learning to flash the phone
xploited said:
I meant Bootloader Unlocked. Gingerblur is a P-ROM so looks like you didn't unlock the bootloader to use it.
If you have the failed to boot error, i would do rsf flash of 2.3.4 with pudding.
If you can boot into Gingerblur, i would first flash a pudding sbf for your phone, do the unlock bootloader commands, installed CWM, and from there modding is a breeze.
Click to expand...
Click to collapse
Can someone point me to where i download the 2.3.4 with pudding to flash with rsd lite please? I got my battery charged up and ready to flash. A link with guide even better. Just a notice here i have never updated to 2.3 OTA . Any help will be appriciated thanks
Anyway guys should i flash with the first firmware that i found on this thread here http://forum.xda-developers.com/showthread.php?t=1125944 . Its the att 2.3.4 one. The first one u see om that thread.
oocutioo said:
Anyway guys should i flash with the first firmware that i found on this thread here http://forum.xda-developers.com/showthread.php?t=1125944 . Its the att 2.3.4 one. The first one u see om that thread.
Click to expand...
Click to collapse
UPDATE: I got my phone back to life and unlocked bootloader/rooted with cherryblur. Thanks everyone that helped
I tried to update my MB860 with Motorola Software Update soft, but the process failed. Now I have the:
"failed to boot 4
Starting RSD mode"
I tried to reiniciate the process with Motorola Software Update again and - after 3rd attempt, it communicated a successful update. Anyway, phone doesn't start and I got the same "failed to boot...".
So, I went for RSDLite 5.6 and tried to flash 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31-release-keys-signed-Orange-GB (phone was originally Orange UK). RSDLite finished successfully (due to the status information in the program", but the phone, after rebooting, is... "failed to boot 4
Starting RSD mode". I tried again "Motorola Software Update", it communicated me successful flashing and... nothing changed. So, whatever I do, I got the same boot failure.
The phone is not rooted nor the bootloader is unlocked. I bought it used and it was working ok. Anyhow, when I simunlocked it (yesterday) - the next day after buying - and installed several appz from the market, it started freezing (tens of times, mainly during booting or screen unlocking) and each time I had to pull the battery off to get it back to life.
That's why I tried to update it though - hoping it'd help.
What can I do now?
YET ANOTHER UPDATE 1/9/2012:
MAJOR SUCCESS VIA THE FOLLOWING LINK: http://forum.xda-developers.com/showpost.php?p=21015556&postcount=6
THIS IS ACTUALLY A US CELLULAR SBF FLASH BUT I SUCCESSFULLY FLASHED THAT FILE TO MY PHOTONSTEIN AND MANAGED TO GET BOOTED ALL THE WAY INTO THE ANDROID/GOOGLE SETUP WIZARD.
NOW I AM ATTEMPTING TO FLASH A SPRINT 198_7 SBF.
UPDATE 1/9/2012:
I RECENTLY PURCHASED A EVO 3D FROM CRAIGSLIST TO REPLACE MY PHOTON. THEREFORE, I WILL KEEP MY PHOTON AS A LAB MOUSE TO TRY TO GET A HEART BEAT BACK INTO IT. THANKS FOR ALL THE EFFORT TO EVERYONE! I WILL KEEP THIS THREAD UPDATED UNTIL I EITHER GET MY "PHOTONSTEIN" WALKING AGAIN OR BURRIED IN THE BONE YARD WHICHEVER COMES FIRST.
UPDATE! I have had successful communication with the photon through android-sdk. I don't however have the correct img file to flash to the phone. Does anyone have any ideas?
Okay, I know I am somewhat of a newbee at this. But I followed all the steps and wound up with a brick. All I get is "Failed to boot 3" then "Starting RSD mode".
I tried flashing the "1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf" and it fails telling me that it failed to re-enumerate.
Am I screwed or does anyone have a suggestion?
Thanks.
try flashing the 198_7 sbf on rsd 5.5
Sent from my MB855 using XDA App
Jmaserang said:
try flashing the 198_7 sbf on rsd 5.5
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Thanks, I'm downloading now. I will repost if successfull.
treetolber said:
Okay, I know I am somewhat of a newbee at this. But I followed all the steps and wound up with a brick. All I get is "Failed to boot 3" then "Starting RSD mode".
I tried flashing the "1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf" and it fails telling me that it failed to re-enumerate.
Am I screwed or does anyone have a suggestion?
Thanks.
Click to expand...
Click to collapse
You may wish to consult this thread and completely read/watch everything.
http://forum.xda-developers.com/showthread.php?t=1250697
You may also want to reinstall the drivers for your photon. I had the same problem and a quick driver reinstall fixed it.
It appears that I have either damaged or deleted the bootloader. Sprint won't touch it with a 10 foot pole. Does anyone know how to get the bootloader back to the device?
I am able to connect to it with RSD Lite but I can't flash anything.
treetolber said:
It appears that I have either damaged or deleted the bootloader. Sprint won't touch it with a 10 foot pole. Does anyone know how to get the bootloader back to the device?
I am able to connect to it with RSD Lite but I can't flash anything.
Click to expand...
Click to collapse
Are you still getting "starting RSD mode"?
If you are, I think you're safe. I guess you're one of the many of us who flashed 2.3.5 pudding into their Photons. If that's the case you can follow a small tutorial i did here:
http://forum.xda-developers.com/showpost.php?p=21015556&postcount=6
Give it a shot and let me know how it goes.
You shouldn't need the bootloader at all actually. I had the same issue with my phone. I had to remove the SIM card and the SD card. Then when you put the battery back in Hold down the Power button and the Volume up button until it says RSD lite mode or something along those lines. Then connect it to your computer and run the RSD lite and select the proper factory ROM that you need to install back on your MOPHO. You will lose root access but your phone should be right back to all of the factory settings. I have done this multiple times to fix error that I got because I am new to Rooting my device and everything as well. I will give you links to where I was able to find some addition support as well.
http://forum.xda-developers.com/showthread.php?t=1373135
http://forum.xda-developers.com/showthread.php?t=1202666
If all else fails call sprint and ask for an advanced exchange from tech support
Sent from my MB855 using XDA App
treetolber said:
Okay, I know I am somewhat of a newbee at this. But I followed all the steps and wound up with a brick. All I get is "Failed to boot 3" then "Starting RSD mode".
I tried flashing the "1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf" and it fails telling me that it failed to re-enumerate.
Am I screwed or does anyone have a suggestion?
Thanks.
Click to expand...
Click to collapse
Where do you find build 154 for the photon?
Sent from my Nexus S 4G using Tapatalk
Has anyone had their photon just show the pulse Motorola logo and the power cycle it self back to the same screen?
Sent from my Nexus S 4G using Tapatalk
Wow there's been a **** ton of threads with "bricked" in the titles lately what are you guys doing lol.
Also not to be a douche but this isn't development. This thread should be in general or q&a next time.
I had the boot loop prob pwr+vol down get to stock recovery and wipe the phone worked for me
Sent from my MB855 using XDA App
TheGman125 said:
Where do you find build 154 for the photon?
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
I'm not sure. I followed a link somewhere in the threads on this forum.
firtermish said:
Are you still getting "starting RSD mode"?
If you are, I think you're safe. I guess you're one of the many of us who flashed 2.3.5 pudding into their Photons. If that's the case you can follow a small tutorial i did here:
http://forum.xda-developers.com/showpost.php?p=21003839&postcount=9
Give it a shot and let me know how it goes.
Click to expand...
Click to collapse
Well now my battery is dead and I don't have any way of charging it unless I take it to a Sprint store and have them charge it over night.
Thanks for all the help!
treetolber said:
Well now my battery is dead and I don't have any way of charging it unless I take it to a Sprint store and have them charge it over night.
Thanks for all the help!
Click to expand...
Click to collapse
You can cut the end off of a charger strip the wires red on pos+ black on neg- and plug it in but don't leave it on longer than 20 min at a time cuz battery might over heat
Sent from my MB855 using XDA App
I can start the flash process but after a while the following message appears on the screen of the Photon: "sec_exception: b655, eddt, eb".
Then the flas process out and displays the following:
"Failed flashing process. Phone(000): Phone did not re-enumerate after RAM-downloader was sent. (0x703E); phone connected.
Has anyone seen this and recovered from it?
P.S. This is all with or without the SIM card and SD card inserted or removed.
TheGman125 said:
Where do you find build 154 for the photon?
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
ShabbyPenguin has critical photon files hosted (and linked in his signature)
Photon Files
Download RSD Lite and 198_7 SBF from.
http://www.holylivingfuck.com/ACS/SBFs/
You should read this thread on more information about 198_7
http://forum.xda-developers.com/showthread.php?t=1202666
Make sure you have proper USB drivers for OS 64 or 32 bit installed, install RSD lite and follow the directions below.
Make sure your battery is greater than 50percent before doing any of this.
1) Fire off RSD lite, select the SBF you need 198_7 .
2) Hold down power and vol up till RSD mode comes up
3) Plug into usb then start the flashing sequence.. ( the whole process will take a while)
4) The process is done when RSD lite says manually power up the phone.. You may need to take the back off and pull the battery to restart it incase it doesnt power up on its own.
I wonder if you downloaded an incomplete sbf. Try flash 198-7sbf one more time or see if you can enter android recovery and wipe. Also. Check the motorola driver is installed correctly.
Sent from my Motorola Photon using XDA App
I have a motola photon that I believe is bricked due to and attempt to flash the electrified 2. 3. 5 without doing my research. The bootloader is unlocked but every attempt at a fastboot command freezes at waiting for device. I've flashed every sbf under the sun threw rsd with failure at the phone "re-enumerate" stage. I'm so stuck and very confused.. ive been using this stuff since my Android Leo, g 2 and many more.
ashirback said:
I have a motola photon that I believe is bricked due to and attempt to flash the electrified 2. 3. 5 without doing my research. The bootloader is unlocked but every attempt at a fastboot command freezes at waiting for device. I've flashed every sbf under the sun threw rsd with failure at the phone "re-enumerate" stage. I'm so stuck and very confused.. ive been using this stuff since my Android Leo, g 2 and many more.
Click to expand...
Click to collapse
If you flash a 2.3.4 Locked sbf via RSD after the flash failure what does the wcreen on your phone say?
I think I am in a similar situation but found a way to unbrick.
Failed flashing process. Failed flashing process. Phone [0000] "The Secure_Motorola_Flash" Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secure and not for re-flash. (0x7066)
The rsd fails at 98% when the phone attempts to switch to a BP passthrough.
Im baffled
have you tried booting even tho rsdlite fails? it "fails" for me everytime nd still boots xD
Sent from my MB855 using xda premium
it's supposed to fail, the phone still boots perfectly and if not try a battery pull or flashing a locked sbf
Guys of course I tried to boot the phone afterwards. It just sits at the Motorola logo, says unlocked in the upper left corner with 0 animation to the logo. I cant get into recovery either.. its back to the stock exclanation point one.
Anyone have an idea of what could be wrong? How am I supposed to do anything to the phone if Rsd continues to fail and I don't have access threw fastboot? Also the phone model in rsd is listed as NS Flash Sunfire, it lists my bootloader as ver v0x000007 but everything else is listed as N/A
ashirback said:
Anyone have an idea of what could be wrong? How am I supposed to do anything to the phone if Rsd continues to fail and I don't have access threw fastboot? Also the phone model in rsd is listed as NS Flash Sunfire, it lists my bootloader as ver v0x000007 but everything else is listed as N/A
Click to expand...
Click to collapse
What happens when you try to force the phone into fastboot mode by pulling the battery, putting it back in and holding the VOL down and POWER buttons?
Well it let's me get into fast boot with no problem after some fooling around today. however when I try to erase my data threw fast boot it says I don't have a product name. The device is listed in fastboot though as TA00.. (don't remember # off hand). I know the values for this is changeable but is it necessary or is that minor in this large issue.
From what you are telling me this should work...
Make sure that your phone says UNLOCKED at the top left corner..
Follow this: Go specifically to the ROOT instructions: and flash the system image
http://forum.xda-developers.com/showthread.php?t=1216143
Please let me know if it works.
That sounds perfect but the link for the system file is down. Anti piracy bull**** government hoopla. GARRRR ! Anyone by any chance have a copy of the file or a mirror to where i cant find it?
ashirback said:
That sounds perfect but the link for the system file is down. Anti piracy bull**** government hoopla. GARRRR ! Anyone by any chance have a copy of the file or a mirror to where i cant find it?
Click to expand...
Click to collapse
After going to the link have you tried the other sites besides mega downloads?
Yea I tried. The file has been deleted or moved from every file site there. =\ I'm going to continue to troll the net after I escape from work tonight. Hopefully with some luck I can find one that someone else has uploaded.
Fastboot attempts to flash the file but it fails stating "INFOImage is too big, use 0x10000000 bytes chunks"
ashirback said:
Fastboot attempts to flash the file but it fails stating "INFOImage is too big, use 0x10000000 bytes chunks"
Click to expand...
Click to collapse
Well!!! did you wipe before you had flashed the 2.3.5 SBF ????
If running in Win 7 make sure that you opened up the command prompt as administrator. Also make sure that you put the system.img in the fastboot folder/directory. So you should be doing:
1. fastboot erase system
2. fastboot flash system.img
3. fastboot reboot
Still wouldnt let me because the system image was too big.
But i managed to flash clockwork threw fastboot and was able to boot that up. I did a factory reset in clockwork rebooted and it was still frozen. But i was able to flash redROCKO 1.1.1 and then it booted and is now working flawlessly.
I'm concerned my Photon is bricked and wanted to reach out to the community for some help. I recently came across a Photon running 2.3.5 which I know can't be unlocked with pudding. I was searching around for options and I came across this post. I was able to find the two SBF files for electrify on motosunfire.com. I know it says not for the Photon but the post I read before said it worked for them. I first tried the 2.3.4 and it failed re-emnumeration (Spelling?) so I figured I would go ahead and try the other. I used RSD Lite to flash the 2.3.5 and it failed to but I can't remember what it error message was. Now when I try to boot up the phone it hangs on the Motorola Dual Core logo. I can't get it to boot into fastboot or rsd mode. Without either of those or a normal boot I feel like I maybe screwed.... Any assistance would be welcomed!
PS I have tried Googling it and searching on XDA and nothing seems to work. RIght now I'm just letting the phone rest. I tried plugging it in to see if I can get the charging battery to show up and again it hung at the Motorola Dual Core screen. I know the battery should still have a good charge though.
WiredAnim said:
I'm concerned my Photon is bricked and wanted to reach out to the community for some help. I recently came across a Photon running 2.3.5 which I know can't be unlocked with pudding. I was searching around for options and I came across this post. I was able to find the two SBF files for electrify on motosunfire.com. I know it says not for the Photon but the post I read before said it worked for them. I first tried the 2.3.4 and it failed re-emnumeration (Spelling?) so I figured I would go ahead and try the other. I used RSD Lite to flash the 2.3.5 and it failed to but I can't remember what it error message was. Now when I try to boot up the phone it hangs on the Motorola Dual Core logo. I can't get it to boot into fastboot or rsd mode. Without either of those or a normal boot I feel like I maybe screwed.... Any assistance would be welcomed!
PS I have tried Googling it and searching on XDA and nothing seems to work. RIght now I'm just letting the phone rest. I tried plugging it in to see if I can get the charging battery to show up and again it hung at the Motorola Dual Core screen. I know the battery should still have a good charge though.
Click to expand...
Click to collapse
I now have a similar problem. I'm a sprint User and was unlocked and rooted using Cyanogenmod 9 and needed to go back to stock. I followed QBKING77s guide on unbricking and going back to stock for your photon and it bricked my photon to rsd mode.
From there I tried flashing the other sbfs and still was bricked. I then saw that flashing another SBF file may get me out of the bootloop I was in on this thread.
http://forum.xda-developers.com/showthread.php?t=1849526
and now I can't get the phone into RSD mode to flash anything. The phone just hangs at the Dual core boot logo.
Any assistance in fixing my phone would be greatly appreciated.
Thank You.
You can check this. Hope this will Help.
http://forum.xda-developers.com/showthread.php?t=1820371
daniel32 said:
You can check this. Hope this will Help.
http://forum.xda-developers.com/showthread.php?t=1820371
Click to expand...
Click to collapse
Thanks for the link but I have looked those over. My main issue is I can't get into RSD or fastboot...:crying:
What is the last SBF File that you have used? is it 2.3.5 usc_19? if thats the one, after you have SBF, it will say Failed but its OK. Next, Remove the Battery for some Minutes like 5mins, then put back on, wait some Minutes again, like 10mins, then it will continue, and you will have Electrify System. after that, you have too root, and bootstrap, and install stock rom of photon to get back.
1. RSD the USC_19.0 sbf
2. Root with Photon Torpedo
3. Install bootstrap apk
4. Bootstrap flash the Stock Photon 4.5.1A-1_SUN-254_13.zip
5. RSD the 2.3.5_45.4.13ota_unbrick.sbf
http://forum.xda-developers.com/showthread.php?p=30332325
---------- Post added at 05:08 PM ---------- Previous post was at 05:01 PM ----------
TRY THIS LINK:http://www.droidforums.net/forum/droid-hacks/62627-phone-wont-boot-stay-m-help.html
Some Important Files in this Link:http://forum.xda-developers.com/showthread.php?t=1798145
daniel32 said:
What is the last SBF File that you have used? is it 2.3.5 usc_19? if thats the one, after you have SBF, it will say Failed but its OK. Next, Remove the Battery for some Minutes like 5mins, then put back on, wait some Minutes again, like 10mins, then it will continue, and you will have Electrify System. after that, you have too root, and bootstrap, and install stock rom of photon to get back.
1. RSD the USC_19.0 sbf
2. Root with Photon Torpedo
3. Install bootstrap apk
4. Bootstrap flash the Stock Photon 4.5.1A-1_SUN-254_13.zip
5. RSD the 2.3.5_45.4.13ota_unbrick.sbf
http://forum.xda-developers.com/showthread.php?p=30332325
Click to expand...
Click to collapse
Ya, that is the file I flashed. When I unplugged the phone and pulled the battery rsd lite stopped. I waited and hooked all back up but nothing started and I can't get in rsd to try and flash anything else. Thanks for all the help everyone I just want my photon to boot again!
WiredAnim said:
Ya, that is the file I flashed. When I unplugged the phone and pulled the battery rsd lite stopped. I waited and hooked all back up but nothing started and I can't get in rsd to try and flash anything else. Thanks for all the help everyone I just want my photon to boot again!
Click to expand...
Click to collapse
Have you try This: Turn if off, then plug it in an outlet, wait to power it by itseft, then wait if it will continue to boot in System. Maybe the battery
seems not to be recognized or something.
Good news people it booted on its own. It is running Stock USC but it boots!!!
WiredAnim said:
Good news people it booted on its own. It is running Stock USC but it boots!!!
Click to expand...
Click to collapse
The same thing just happened to me. Strange. Thanks for giving me hope and to wait it out.
I installed an app to change the boot animation on my Atrix 4g and when I rebooted to see it, all i get is the m logo with dual core technology under it. It is rooted and i didn't flash any new roms or anything. i wiped the cache partition from the recovery menu and also " wipe data/factory reset" but it still doesn't boot up.
its on android 2.3.6 build 4.5.141
please help me :crying:
Do you have recovery software?
Fervi
Just restore the system partition from the backup you SHOULD do before any modification and you will be good to go.
Otherwise, delete the faulty bootanimation and restore the original via adb on recovery and reboot.
There is also a no bootanimation option on build.prop, althrough I'm not sure if it's avaiable on 2.3
Enviado desde mi MB860 usando Tapatalk 2
i don't have any recovery software or backups made.
If you have fastboot option, you can install TWRP (or CWM) and then install other rom (like Motorola Atrix ICS [4.0])
Fervi
ferviverus said:
If you have fastboot option, you can install TWRP (or CWM) and then install other rom (like Motorola Atrix ICS [4.0])
Fervi
Click to expand...
Click to collapse
and how would I accomplish this?
http://wiki.cyanogenmod.org/w/Template:Recovery_install_fastboot
Remember - There is no guarantee that everything will go fine. You do it at your own risk
Fervi
ferviverus;54222742
Remember - There is no guarantee that everything will go fine. You do it at your own risk
Fervi[/QUOTE said:
whenever i type fastboot devices into command prompt even when it is connected and in fastboot it doesn't work.
Click to expand...
Click to collapse
So I got fastboot and everything working. I think flashing the sbf with rsd lite might work, only problem is that whenever I try to download the sbf files it takes me to some ilivid download manager. Soo anyone know where I can download the actual sbf?
specter187 said:
So I got fastboot and everything working. I think flashing the sbf with rsd lite might work, only problem is that whenever I try to download the sbf files it takes me to some ilivid download manager. Soo anyone know where I can download the actual sbf?
Click to expand...
Click to collapse
http://sbf.droid-developers.org/
Sent from my MB886 CM10.2/4.3.1
i think things just got worse
palmbeach05 said:
[ul]htt://sbfdroid-developers. org/[/url]
Sent from my MB886 CM10.2/4.3.1
Click to expand...
Click to collapse
I tried flashing and now when I put my phone into rsd mode its says: failed to boot 1
PwrReason: PWR_KEY_PRESS
starting fastboot protocol support
and when I try to put it into fastboot my phone comes on says something and it turns off to quickly for me to see what the text says.
and when I just power on without pressing anything it says failed to boot 1 and that same confounded dooming m logo
I feel as though my atrix is unflashable or something.
specter187 said:
I tried flashing and now when I put my phone into rsd mode its says: failed to boot 1
PwrReason: PWR_KEY_PRESS
starting fastboot protocol support
and when I try to put it into fastboot my phone comes on says something and it turns off to quickly for me to see what the text says.
and when I just power on without pressing anything it says failed to boot 1 and that same confounded dooming m logo
I feel as though my atrix is unflashable or something.
Click to expand...
Click to collapse
its actually in a state of i need to be unlocked and searching failed to boot 1 would have brought you to this - http://forum.xda-developers.com/showthread.php?t=1528729
the sbf download link from the forum link you posted doesn't work
A DEAD PAGE 404 ERROR
HIDE THE PIE!!!!
specter187 said:
the sbf download link from the forum link you posted doesn't work
A DEAD PAGE 404 ERROR
HIDE THE PIE!!!!
Click to expand...
Click to collapse
Really? the mini sbf that I'm referring to is not a full sbf. it is a 1 MB file that you should get and do to obtain root.
Where in what you have said in this entire thread did you unlock the bootloader?
palmbeach05 said:
Really? the mini sbf that I'm referring to is not a full sbf. it is a 1 MB file that you should get and do to obtain root.
Where in what you have said in this entire thread did you unlock the bootloader?
Click to expand...
Click to collapse
my bootloader isn't unlocked
specter187 said:
my bootloader isn't unlocked
Click to expand...
Click to collapse
Then I would highly advise that you unlock your bootloader before any more help is given to you. I don't say that in a mean way, I say that in a strong recommendation way. Without that bootloader being unlocked, there is little help we can do to get you back up and running.
palmbeach05 said:
Then I would highly advise that you unlock your bootloader before any more help is given to you. I don't say that in a mean way, I say that in a strong recommendation way. Without that bootloader being unlocked, there is little help we can do to get you back up and running.
Click to expand...
Click to collapse
my bootloader is now unlocked
AVAAAAST YEE!
I HAVE SALVATION! MY PHONE IS ON! I HAVE SEEN THE MOTOBLUR SCREEN.
i am almost afraid now to root it
here goes nothing
specter187 said:
my bootloader is now unlocked
Click to expand...
Click to collapse
delete, wifi on my end didn't post this when I originally did. congrats btw!
Update?
there is an update to upgrade it to 4.5.145 i tried and i got a failed to boot 4 starting rsd protocol support
but i fixed that. So can i not update a phone with unlocked bootloader? or is there some kind of run around?