Hi.
Last night I was trying to flash CWM recovery via Odin. The screen suddenly showed following message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
Kies will not recognize my phone. I cant boot to recovery mode (was running android recovery before this). The only thing I can do with it is boot to download mode. Odin still finds the phone.
Even when I connect the charger above message displays.
Any master who has a clue?
Bad flash
Flash stock rom via Odin.
Fails its a service centre job
Custom rom counter above zero = no warranty likewise rooted kernel .
Reset rom counter to zero with USB jig flash stock rom to remove root .
jje
OP, if you're a beginner (like me), check out the boot loop thread that is stickied in this subforum - it has all the steps you need to do laid out in order: http://forum.xda-developers.com/showthread.php?t=1108499
Related
I was in the process of rooting my phone with Odin and using Clockwork Mod Recovery Odin flashable .tar file when I accidentally unplugged it while it was in the process of starting. Now I'm stuck on a screen where it says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
In the corner of the phone it reads
ODIN MODE
PRODUCT NAME: SGH-I717
CUSTOM BINARY DOWNLOAD: YES(1 COUNTS)
CURRENT BINARY: CUSTOM
I need answers.... Would appreciate it
Download kies and while on that screen go to tools-firmware upgrade and installation that should get you back to stock
Did that, it downloaded then proceeded with the update and never went through. Let it sit for about 30 minutes, it never even hit 1%. I re did them steps tried to initialize it once more and all it does it download firmware then go away. Is it possible the phone is bricked?
If you can get into that screen its probably a soft brick, does odin recognize the device in in that weird download mode?
http://forum.xda-developers.com/showthread.php?t=1863995
Read this .....
It describes your issue I think ....g
Hi, I have a problem, I was flashing my s2 by Cwm recovery, did all the wipe and factory data, and then went to install the rom, but did not recognize the sdcard, and there was where save the rom, then use odin, to install the rom, since the phone would not start, install 2.3.6 with all files ("pit", "PDA", "Phone" and "csc" and the three boxes checked ("re-partition", "RBOOT self "and" f. reset time ") the process lasted almost five minutes and already finished, waiting two minutes thought this was over, and spent more than 30 minutes and nothing, disconnect and remove the battery, and now only comes in "Download Mode" and when I turn in "recovery" I get a celulara, a yellow triangle and pc "says" encountered an UPGRADE FIRMWARE ISSUE. PLEASE SELECT RECOVERY mODE iN KIES & TRY AGAIN. "
I can only enter download mode, and I have so:
ODIN MODE
PRODUCT NAME: i9100
CUSTOM BINARY DOWNLOAD: YES (1 COUNTS)
CURRENT BINARY: CUSTOM
but since the pc does not recognize it, before the sound reproduced pc to connect the phone and no longer does, hence not able to do anything eh, I do.?
leei in a forum that the cell is still alive and is a single failure, but can not find solution working.
this user also also had the same problem, but the mode excepciopn reconicia download the pc
http://forum.xda-developers.com/showthread.php?t=2374594
sorry for my bad English, I'm Latin American, and had not
try to get to cwm and do a wipe/factory reset
or get a usb jig
p.s. are you sure you placed the files on the right places while flashing via ODIN ?
S2 brick
wishmas7er said:
try to get to cwm and do a wipe/factory reset
or get a usb jig
p.s. are you sure you placed the files on the right places while flashing via ODIN ?
Click to expand...
Click to collapse
Can not enter Cwm, when I try to get out, the celulara, the yellow triangle and pc, if put the files fine. I can only enter download mode, but the phone does not connect to pc, eh tried on other computers and also, that I can do?
Did you try to flash a custom rom with odin?
Look for "forced download"
Sent from the little guy
PHONE : Samsung galaxy s2 GT 1900T, stock JB 4.1.2, rooted, with jeboo kernel.
About 2 weeks ago, i'm trying to install custom OS (cyanogen 11=kitkat) to my beloved phone.. i got eror when try to install (status 7) but im installing the right version of cyanogen for my phone. so i decide to reboot my phone, then bluffff all gone. i stuck at "samsung galaxy sII" sign. i take out the battery and try to enter recovery mode (cwm) but same!!! stuck at the black logo screen. then i try to flash stock ROM using download mode, but odin doesn't detecting my device
what should i do???
REALLY NEED HELPPP
THANKS!
You need to get a successful Odin flash one way or another. How ? Hopper8's 'Odin troubleshooting' thread stickied in General. Go through as many of the troubleshooting steps in the thread as many times as you need to in order to get a successful flash.
That what i know. Your phone is booting up to download mode
cos it is a second bootloader and it alright with that. Your kernel
partition is a third bootloader and that looks spoiled for me thats
why Odin cant recognize your phone. You need to try to hold
some buttons Vol up down and home while in download mode
combine them together try to plug in your phone before and after
download mode come up. Good luck
the thing is, commonly when i hear Status 7, the first thing came in my mind is update your CWM / TWRP...and most of the time that solved the problem (dunno if theres any other meaning for Status 7)
theres always search option, you know
S3 stuck in ODIN
OK I've tried everything and read as many threads as I could find. Here's the scenario
- stuck in ODIN mode
- try to get into Recovery mode but it just flashes and goes away and then back into ODIN mode
- KIES sees the phone and I can kick off a firmware upgrade and initialization but I want to try and keep all the data
- I've tried 4 different version of ODIN and stock ROMs from ATT, all FAIL immediately and now the device boots into ODIN mode with Flash Read Failure error
Any ideas?
I didnt understand werry vell but try this if you can enter recover connect your samsung to pc and pull out your files am not shure if you can do this with CWM recovery but you can with twrp then delete everthing (factory reset will keep your files) download offical firmware from sammobile or simmilar and flash it with odin
What was the last thing you did before you got stuck
Edit
I dont know will this make any diffrence but flas other firmware not att
Hello,
I just received my brand new Samsung Galaxy A40 (SM-A405FN) and I wanted to root it / install Custom Rom before anything else.
So I downloaded TWRP 3.4.0 for my phone and tryed flashing it. But that did not work, I was stuck in download mode. So I decided to reflash original firmware. During the flash, Odin stuck itself at "Boot" operation during more than 15min, so I decided to reboot the phone to retry (what a big mistake...).
And now, I can't access Bootloader mode anymore, I only have a blue screen with "An error has occured while updating the device software. Use Emergency Recovery function in smart switch PC software".
I downloaded Smart Switch and tried the emergency recovery, but no devices appears in the list. Same thing with Kies...
I'm lost, please tell me I did not completely brick my brand new phone :crying: ...
Thank's for help and sorry for bad english...
EDIT: Ok, the phone is not dead ! I finally got the download mode back with the correct timing for key strokes!
Can someone tell me why I can't boot after flashing this TWRP: https://twrp.me/samsung/samsunggalaxya40.html ?
I saw this post which tells to flash Kernel & VBMeta with the recovery but Odin can't flash .img files: https://forum.xda-developers.com/galaxy-a40/development/recovery-twrp-galaxy-a40-t4025587
solved?
Brick Problem solved yes, I still have not manage to install TWRP but at least I have been able to re-install stock firmware. Maybe I should do another thread for that problem
maybe you can try to enter the forum according to the device you are using.