Firstly UPS to dcd no2 and all the rest for such awesome work. I find myself making a new rom for my own use on a daily now.
I'm a Mac user but have to use Parallels w/ XP to put my rom's on my Mogul. Most times this fails mid update. It's not in the same place every time and sometimes completes ( rarely )
The mogul is seen by XP. Active Sync picks it up and connects. I'm able to browse the phone/mem card. AND the RUU completes sometimes, leaving me with a phone & rom that boots.
When I use my friends XP machine the same rom's install perfectly, every time. So I know at the very least the rom's I create are good.
Does anyone have experience with this issue?
bootcamp
BOOT CAMP.....Thats is the answer for you, I hope.....
The reason why I say "I hope"...is that you need an Intel Processor to use it....if your mac is Intel bases, make a minimal partition with a minimum install of XP...(thats what I did)...
I use this partition ONLY for flashing my ROM.
If you DON'T have an Intel mac.....
1. Get more RAM
2. make sure you close all other open programs.
3. Make sure that you are not using an disk intensive activities.....(IE: uploading/downloading, virus scans, backups etc...)
4. Make sure that you do not do ANYTHING while flashing the ROM.
5. Make sure that your computer's SLEEP is disabled.....
6. For good measure, temporarily set parallels for parallels performance and NOT background applications.
7. If you know how, disable any unneeded services running in your WINDOWS Parallel....
8. If possible, make yourself a Win98 parition for parallels and you might have better results.
Remember, ANYTHING you do outside of parallels could affect the flash.
I've experienced a different issue using Parallels on my mac. When I first flashed it, I got stuck in bootloader. Every time I'd hook it up to the computer it would tell me the device was already in use and that Parallels couldn't use the device. A reboot of the computer and/or the phone didn't help multiple times. I had to break out an old dell laptop with XP on it just to get it to exit the BL.
i use vmware fusion on my mac under leopard, i can flash and do anything just fine..., maybe you should try fusion. Works for me
Same here, Try VM FUSION... I had problems sending data to flash over usb with Parallels.
Another vote for VMware fusion and Leopard. I have done numerous flashes without issue. Boot camp is a pain but is the ultimate in compatibility. I find that vmware gets the job done for everything I need to do including flashing roms and unlocking the Mogul.
Got my VMware on!! First ROM worked just fine. Thanks so much for the replies everyone.
Because when you have no windows at home and all your computer run linux is not easy to flash under Virtualbox ...
I have translate runme.cmd of step2, 4, 5, 6 into runme.sh (this is easy) but someone can tell me how to flash under linux ? (step 1 and 3) ?
for user want INCOMPLETE linux runme :
http: //ww_w.multiupload. _com/3I9EINJTYD (spam protect)
Do NOT USE the script is for old V3
It's not that simple, its the jar file that needs changing. The device id works different under Linux.
Install virtualbox and run a Windows vm. That's what I did.
Sent from my rooted X10i using XDA App
well I'd like linux support for it too
A Linux method would make it a lot easier than using a VM. However for the time being, I don't see another option...
Sent from my X10i
Thank you,
i m forget the idea, i do flash steps under VM and SDK steps under linux.
I am having problems flashing my X10 using XP and Virtualbox. I get to the stage where I need to unplug my phone and shut it down for 5 secs but then when I plug in the usb and press the back button it will not flash? I assume its because in Virtualbox under Devices the X10 is not unticked as a USB device??
Anyone any ideas?
I have many ideas. But the only way to flash with linux is to ask massively jar dev to compile it for linux.
At the moment, I 've also done a script for linux, it's a quite fun but we can't flash without the jar because actual jar file use MS usb drviers we can't use under linux.
Virtual box is not a so good idea. Surely it works, but there not enough time between the moment when you plug the phone into usb and the time you need to put it into boot process.
The only way is to flash under MS.
I have personally mount virtual raw disk of MS installation, taht way you can use as real machine or as virtual.
After that u can try my script, it's not perfect but it is pretty useful.
http://code.google.com/p/android-inside-tool/
There some user data to fill in and it need to be root for some command. If you need help to use it (if you want to), fell free to ask.
Can I NVFLASH on my Macintosh as I want to change the bootloader from 1.1 to 1.2 so I can run Gingerbread or Maybe Honeycomb?
You can run gingerbread on 1.1 bl. It actually doesn't flash on a 1.2 bl without some workarounds.
As far as your main question goes I have never seen adb drivers for Mac let alone nvflash.
This thread> http://forum.xda-developers.com/showthread.php?t=1039000 can show you how to do it without nvflash. I did it this way the first time but not sure if you could set this up on a Mac correctly.
I would recommended bribing a friend with oreos and or chips ahoy cookies to let you use their PC for your gtab nvflash-fest.
P.s. don't forget the milk... cookies are crap wastes of time without a big glass of moo juice.
Apparently Mac users can use Linux running in a virtual environment (like VirtualBox) to use nvflash. No drivers required. Or you can run XP in a VB and get the adb drivers for nvflash.
Or you can chloroform a friend and use his PC. I still think that's the best option.
Fun fact. Did you know that mac is made by the devil?
I highly recommend using Ubuntu Linux on VirtualBox. Both are free and very well supported. There is also a Mac version of the SDK which will give you ADB support as well in a much closer to native environment than windows. Overall it's a much better environment for development and modding android devices.
A lot of the development that has (is) taken place for our Nook's is performed by the developers in Linux. As such there are a few posts in the development thread that offer "Linux Only" solutions.
We already have the Original ClockWorkMod (CWM) installation instructions, AdamOutlers Ubuntu Recovery and others.
People have also been recommended to re-format their bootable SD Cards using a program in Linux called Gparted. I can verify that this program works great but I'm sure I'm in the minority with having access to a Linux Machine. This thread is here to offer some suggestions.
To my knowledge you have these options:
1. Run Linux in a Virtual Machine (VM)
2. Create and boot from a Live CD/DVD
3. Create and boot from a USB Stick
4. Install Linux on a separate machine
5. Dual Boot
I personally run a MAC and run Linux in a VM. I use a program called Parallels. This is NOT a free solution but if any of you run a MAC I can recommend this program highly. However this thread is dedicated to those Windoze Users so let's press on.
Virtual Machines
VM's are great tools that allow you to try almost all available OS's on your machine with no damage being done to the actual file system of the "Host" operating system which in this case is your windows machine. The "Guest" operating system is typically contained in one single file or a single folder so the entire machine can be backed up easily. This method may be a little more advanced then the method's I will outline below but in my opinion it is well worth it. VM's are fun and once you get the hang of them you will be installing a bunch of new operating systems just to "fiddle".I have a version of Dos 6 running in a VM just because I can. LOL
Virtual Box is a free VM for Windows and I believe they even offer pre-built Linux Distro's that you simply download and open once the main VM software is installed.
VMware Player is also free.
Live CD's/DVD's
Live CD's are great for a quick format job's such as those found here in the Forum's. The downside is that they are a little slower and changes you make while the system is running are lost.
Knoppix
Ubuntu is the distribution recommend most. This link brings you to a download page where you can select either a Full Install Version, a Live CD Version or a Flash Drive version.
The LiveCD List Too many to mention. Check it out.
USB Stick
Advantages to a USB stick is that you can make the file system mountable and changes you make to the system can be made persistent meaning the next time you boot your changes will be saved. It is also a tad bit faster then the live CD but a little more difficult to make. Not much though
Ubuntu same link as above.
Linux Live USB Creator is a cool application that you install and it talks you through the steps. Once Installed I believe it will even provide you with a list of available distributions and download it for you. It will then use the download to create a bootable USB stick.
PenDriveLinux is the same premise as Linux Live. It will talk you through the steps.
Full Installation
This method is obviously for more advanced users and requires a computer that you will dedicate to running linux. If you fit these qualifications it is a rather fun experience and a great learning tool.
Ubuntu I'm linking this again because it is the same area you would obtain the Full Version of the software to download.
Linux Distro Watch contains a complete list of the most recent Linux Distro's. Pick a flavor and read up on how to install.
Dual Boot
AdamOutler has suggested that this Section be added. Dual booting is an option that replaces your boot loader with an "option" screen allowing you to select which OS you wish to boot. I honestly can't recommend this to beginners and even though I consider myself more of an advanced user, I have experienced issues with this in the past. Simply put if that boot-loader somehow gets corrupted you can render the entire machine inaccessible. Mind you it has been a LONG time since I used a dual-boot solution and I'm sure the methods have improved significantly over the years. Adam has mentioned that the Live-CD and USB-Stick versions offer you the option to install the boot-loader now. Like I said, once I went to VM's I haven't looked back but this IS a viable option if you are so inclined. The advantage would be that your Linux Distro would run at full speed and would be just like having your own Linux workstation without the need to purchase or obtain additional hardware. Simply select the OS you wish to run (Windows, Linux, ETC.) and boot into that OS. Adam's post can be viewed HERE. Thanks Adam!
User Suggestions
Wubi was recommended by Veronica (Lavero.Burgos). It looks like it may be a pretty easy (and Cool) option. Give it a shot! Thanks Veronica!
Know-Fear has offer some additional Instructions in This Post. Good Information there. Give him a thanks!
Birdsbeaks recommends NOT taking the easy road if you are truly interested in "learning" Linux. He suggests that you start with a distro that has a "steeper learning curve". One of his recommendations was Slackware. He also prefers MINT over Ubuntu as he feels it is less "proprietary". You can read his full comment HERE.
By no means is this list even close to complete. I simply wanted to give you a starting point and the rest is up to you. I have tried a few of these solutions in the past but since moving to a VM solution that is where I stand. Since it has been awhile, your mileage may vary (YMMV) but this should get you started.
If you have questions feel free to post them and I will do my best to help you along but the best way to learn is to experiment on your own.
If anybody has tried other versions or solutions feel free to post them and I will update the Original Post (OP).
Have fun and good luck!
****Reserved*******
I choose to dual boot windows 7 and Ubuntu.
All the options you mentioned work. Probably a live CD or USB would be the best bet for most people, since most probably wont spend alot of time on it.
@LandMaster you forgot Wubi, also have anyone tested Ubuntu 12.04 LTS alpha? So far im researching about Cinnamon Linux Mint 12 which looks promising .
~ Veronica
lavero.burgos said:
@LandMaster you forgot Wubi, also have anyone tested the new 12.04 LTS alpha of Ubuntu? So far im researching about Cinnamon Linux Mint 12 which looks promising .
~ Veronica
Click to expand...
Click to collapse
Added. Thanks!! Looks cool. I had never heard of it
What is this Windows you speak of.
don't forget to add in the full installation that most Live CDs and USB sticks will give you the option to run "side-by-side" or "Dual-boot". Personally, I'd just wipe Windows from the computer, if you need it back for some reason just use your quick restore disks.
I run a dual boot on my netbook because I have some hardware that requires Windows. Other than that, I can run about 3 separate virtual machines at the same time within Linux and everything works fine... Windows xp, Windows 7 and OS-X Lion all run fine in virtual machines within Linux. With guest additions, you can make them full-screen or share your desktop with the virtual machine so "Windows" windows appear in the same space as the Linux windows.
AdamOutler said:
don't forget to add in the full installation that most Live CDs and USB sticks will give you the option to run "side-by-side" or "Dual-boot". Personally, I'd just wipe Windows from the computer, if you need it back for some reason just use your quick restore disks.
I run a dual boot on my netbook because I have some hardware that requires Windows. Other than that, I can run about 3 separate virtual machines at the same time within Linux and everything works fine... Windows xp, Windows 7 and OS-X Lion all run fine in virtual machines within Linux. With guest additions, you can make them full-screen or share your desktop with the virtual machine so "Windows" windows appear in the same space as the Linux windows.
Click to expand...
Click to collapse
I added a dual-boot section to the OP. I'm out of thanks for the day. I'll hook you up later.
Totally agree about Windoze. I have a really good laptop that runs Win 7 and it would take me about an hour just to clean the dust off of it.
As this guide is for "beginners" I didn't really want to tell them to forego windows and wipe their boxes. Hopefully they will come around once they have a chance to experiment with Linux.
AdamOutler said:
don't forget to add in the full installation that most Live CDs and USB sticks will give you the option to run "side-by-side" or "Dual-boot". Personally, I'd just wipe Windows from the computer, if you need it back for some reason just use your quick restore disks.
I run a dual boot on my netbook because I have some hardware that requires Windows. Other than that, I can run about 3 separate virtual machines at the same time within Linux and everything works fine... Windows xp, Windows 7 and OS-X Lion all run fine in virtual machines within Linux. With guest additions, you can make them full-screen or share your desktop with the virtual machine so "Windows" windows appear in the same space as the Linux windows.
Click to expand...
Click to collapse
Nice!. Adam i have a question for you, i have a netbook as well HP110CA(that gave to bf) 1GB of ram and im having issues with linux on it. It came with windows XP off course and i had to format it twice because it got viruses while in Canada, so i just wiped out and put ubuntu 10.10 in that time. At first was running ok but eventually it started to freeze, later on upgraded to 11.04 and it messed things up so i decided to try other "light" distro and i put Jolicloud(based on ubuntu) again started running fine but keeps freezing and more often, now i don't know what else to put in i was thinking on Puppy linux lol but im not sure why it freezes that much. When i had it with windows it never froze though but i don't want to go back to windows only if its my last resource. What would you recommend? im starting to think its a hardware failure and that linux is too much for that poor machine .
~ Veronica
Hell yeah but I think I messed up bc i. Put the disk in and restarted and it to me to a black screen with cursor so i even up have to goto bios or cmos one of those and change first boot to dvd so hopefully after I'm done with this I. Can get back to windows hopefully my drive order is correct
___________________________________________
Sent from my PG86100-EVO3D-using Tapatalk Born Jan 5th 84 and still getting it in eeee
Anon9mouz said:
Hell yeah but I think I messed up bc i. Put the disk in and restarted and it to me to a black screen with cursor so i even up have to goto bios or cmos one of those and change first boot to dvd so hopefully after I'm done with this I. Can get back to windows hopefully my drive order is correct
___________________________________________
Sent from my PG86100-EVO3D-using Tapatalk Born Jan 5th 84 and still getting it in eeee
Click to expand...
Click to collapse
Yup... When booting from a USB drive or CD the boot order must be set in the bios. I recommend just leaving it as:
1. DVD/CD Rom
2. USB
3. C drive
This way here if 1 & 2 are not attached it will boot from the "C Drive"
I would unplug the hard drive if I were the noobs just in case. That way the noobs wont accidentally wipe their Hard drive
My recommendation for "beginners" would be to try Ubuntu in a Virtual machine ( i use Vmware and love it, has never let me down) and you can still work in your Windows interface, it is also easy to share files between windows and your virtual machine.
It is enough for all the sdcard mods and even adb if you want to set it up there too. I prefer this way rather than Wubi because i can work faster that way, i don't need to reboot to boot into windows, i have all i need in the same place .
~ Veronica
I prefer running either zen-mini or pclos gnome in virtualbox myself
Anon9mouz said:
Hell yeah but I think I messed up bc i. Put the disk in and restarted and it to me to a black screen with cursor so i even up have to goto bios or cmos one of those and change first boot to dvd so hopefully after I'm done with this I. Can get back to windows hopefully my drive order is correct
___________________________________________
Sent from my PG86100-EVO3D-using Tapatalk Born Jan 5th 84 and still getting it in eeee
Click to expand...
Click to collapse
This happens when you use a 64 bit Linux on a 32 bit system. Also when you have a bad copy. Burn at a lower speed. Try redownloading.
AdamOutler said:
...
I can run about 3 separate virtual machines at the same time within Linux and everything works fine... Windows xp, Windows 7 and OS-X Lion all run fine in virtual machines within Linux.
...
Click to expand...
Click to collapse
It's been a couple years since I tried running OSX on non-apple hardware / in a vm. Can you point me to a good resource for this?
I don't always use virtual machines, but when I do, I use VirtualBox. Mostly because it's free.
I have ubuntu 11.10 on my netbook and, while I like the interface, it seems like things get a little slugish at times. Anybody out there know of a good distro for netbooks?
RadicalAns said:
I don't always use virtual machines, but when I do, I use VirtualBox. Mostly because it's free.
I have ubuntu 11.10 on my netbook and, while I like the interface, it seems like things get a little slugish at times. Anybody out there know of a good distro for netbooks?
Click to expand...
Click to collapse
I don't always drink beer, but when I do... Oh wait .... getting sidetracked..
I just did a quick search and believe it or not Ubuntu leads the ranking's on This Page
I remember putting the "Netbook Remix" on an older netbook and it ran OK but not great from what I recall. From quickly glancing at this article it sounds like that version has been merged with the main distribution. You may be able to locate a copy of it though and try it out.
Yeah I really like 11.10 for my netbook. I think I may end up just upgrading the ram on the little bugger. It's nice having a Linux machine that I can muck around on while watching TV w/ the wife.
lavero.burgos said:
Nice!. Adam i have a question for you, i have a netbook as well HP110CA(that gave to bf) 1GB of ram and im having issues with linux on it. It came with windows XP off course and i had to format it twice because it got viruses while in Canada, so i just wiped out and put ubuntu 10.10 in that time. At first was running ok but eventually it started to freeze, later on upgraded to 11.04 and it messed things up so i decided to try other "light" distro and i put Jolicloud(based on ubuntu) again started running fine but keeps freezing and more often, now i don't know what else to put in i was thinking on Puppy linux lol but im not sure why it freezes that much. When i had it with windows it never froze though but i don't want to go back to windows only if its my last resource. What would you recommend? im starting to think its a hardware failure and that linux is too much for that poor machine .
~ Veronica
Click to expand...
Click to collapse
Can someone help me with this one plz i don't know what else to install it lol oh well maybe i end up going back to windows XP.. sigh
~ V
I'm trying to get adb to detect my Electrify on Windows 8, it would seem rooting and/or installing ROMs is impossible without adb, I have my phone plugged in and all the drivers installed except one "Motorola ADB Interface" of course. The manual driver installer errors out on "Cannot detect Operating System" is there anyway around this, either forcing the driver in, or not using ADB to root?
Use a linux live cd and install the android sdk, or use something like vmware, or try to extract the driver and force it to install in device manager, or dual boot an os that isnt in beta...
Sent from my MB855
The linux live cd should actually work I didnt think about that
I found this
http://forum.xda-developers.com/showthread.php?t=741824
It says its for use with HTC phones but could it possibly work with mine?
Its a year and a half old
Will the driver for my phone be installed/available?
I would post this there but its kind of a dead thread
If you have a spare thumb drive of 4gb or larger laying around you can do a persistent install of ubuntu (or just about any other distro) using LinuxLive USB Creator, which can be found here: http://www.linuxliveusb.com/
If you're not very familiar with linux, persistence is like having your linux operating system on a thumb drive with the advantage over a live cd being that any changes you make (such as installations or saved files) are not lost upon shutdown. So you could install the android sdk (which is all you should need) and then whenever you needed it you could just boot from your thumb drive. If you need help setting up (such as installing the sdk and setting the path and what not) let me know.
-devx