Firstly UPS to dcd no2 and all the rest for such awesome work. I find myself making a new rom for my own use on a daily now.
I'm a Mac user but have to use Parallels w/ XP to put my rom's on my Mogul. Most times this fails mid update. It's not in the same place every time and sometimes completes ( rarely )
The mogul is seen by XP. Active Sync picks it up and connects. I'm able to browse the phone/mem card. AND the RUU completes sometimes, leaving me with a phone & rom that boots.
When I use my friends XP machine the same rom's install perfectly, every time. So I know at the very least the rom's I create are good.
Does anyone have experience with this issue?
bootcamp
BOOT CAMP.....Thats is the answer for you, I hope.....
The reason why I say "I hope"...is that you need an Intel Processor to use it....if your mac is Intel bases, make a minimal partition with a minimum install of XP...(thats what I did)...
I use this partition ONLY for flashing my ROM.
If you DON'T have an Intel mac.....
1. Get more RAM
2. make sure you close all other open programs.
3. Make sure that you are not using an disk intensive activities.....(IE: uploading/downloading, virus scans, backups etc...)
4. Make sure that you do not do ANYTHING while flashing the ROM.
5. Make sure that your computer's SLEEP is disabled.....
6. For good measure, temporarily set parallels for parallels performance and NOT background applications.
7. If you know how, disable any unneeded services running in your WINDOWS Parallel....
8. If possible, make yourself a Win98 parition for parallels and you might have better results.
Remember, ANYTHING you do outside of parallels could affect the flash.
I've experienced a different issue using Parallels on my mac. When I first flashed it, I got stuck in bootloader. Every time I'd hook it up to the computer it would tell me the device was already in use and that Parallels couldn't use the device. A reboot of the computer and/or the phone didn't help multiple times. I had to break out an old dell laptop with XP on it just to get it to exit the BL.
i use vmware fusion on my mac under leopard, i can flash and do anything just fine..., maybe you should try fusion. Works for me
Same here, Try VM FUSION... I had problems sending data to flash over usb with Parallels.
Another vote for VMware fusion and Leopard. I have done numerous flashes without issue. Boot camp is a pain but is the ultimate in compatibility. I find that vmware gets the job done for everything I need to do including flashing roms and unlocking the Mogul.
Got my VMware on!! First ROM worked just fine. Thanks so much for the replies everyone.
Related
I am unable to use qpst. install says unable to register several files with computer. program runs but can't find a server. any ideas?
reinstall QPST and make sure you have administrative privileges on the account that you are installing on.
I have reinstalled several times. every time it gives me the same error. I am the admin, as I am the sole user. I tried reinstalling all files in the wiki several times. The program does run, it just doesn't find a server. it is able to recognize my phone, I can't do anything with it though. i am using vista FYI
Is your internet connection on with your PC when your opening QPST?
yes. I use dsl
Being the only account on a vista machine does not mean you are the admin, and further more the admin account is hidden. If you install anything and I mean anything at all, get used to right clicking on an installer and choosing the command "run as administrator". Or unhide the admin account and do all installs from there and use the other account for day to day use. This is the method I use. I had problems running so many programs when I first got vista. There are also options to run programs in XP compatibility mode, like when I use webjal.
Read this if you want to unlock admin in vista Or just make sure you right click and run as administrator. This also fixed many issues I had with BuildOS too.
very interesting...thanks for the tip...Im reading up on it now....those sneaky SOB's
I unlocked the admin and logged into it. I reinstalled all the files and still ran into the same problem. I almost wonder if its because i'm running a lap top
the following files fail to self-register during install
PhoneLib.dll
PhonePropLib3.dll
PhonePropLib4.dll
SerialPortLib.dll
QPSTProxyComponents.dll
all of these are in C:\Program Files\QPST\bin
I am on a Dell laptop running vista, and I only installed qpst after I learned the admin account trick, so I can offer no other help. Sorry man!
Edit, what build are you using and where was it acquired?
im using 215 from the wiki
I am using that version from that source also. What is your machine's specs? 64 bit? 32 bit? home or pro? etc... Lets try to get all this information down so we can see whats different.
im running the 32 bit version of vista on a duo core pentium. its an acer laptop. i'm surprised i can't find anything on this on the internet. I think that windows updates may have gotten me. maby its time for the cure all format the hard drive.
Because when you have no windows at home and all your computer run linux is not easy to flash under Virtualbox ...
I have translate runme.cmd of step2, 4, 5, 6 into runme.sh (this is easy) but someone can tell me how to flash under linux ? (step 1 and 3) ?
for user want INCOMPLETE linux runme :
http: //ww_w.multiupload. _com/3I9EINJTYD (spam protect)
Do NOT USE the script is for old V3
It's not that simple, its the jar file that needs changing. The device id works different under Linux.
Install virtualbox and run a Windows vm. That's what I did.
Sent from my rooted X10i using XDA App
well I'd like linux support for it too
A Linux method would make it a lot easier than using a VM. However for the time being, I don't see another option...
Sent from my X10i
Thank you,
i m forget the idea, i do flash steps under VM and SDK steps under linux.
I am having problems flashing my X10 using XP and Virtualbox. I get to the stage where I need to unplug my phone and shut it down for 5 secs but then when I plug in the usb and press the back button it will not flash? I assume its because in Virtualbox under Devices the X10 is not unticked as a USB device??
Anyone any ideas?
I have many ideas. But the only way to flash with linux is to ask massively jar dev to compile it for linux.
At the moment, I 've also done a script for linux, it's a quite fun but we can't flash without the jar because actual jar file use MS usb drviers we can't use under linux.
Virtual box is not a so good idea. Surely it works, but there not enough time between the moment when you plug the phone into usb and the time you need to put it into boot process.
The only way is to flash under MS.
I have personally mount virtual raw disk of MS installation, taht way you can use as real machine or as virtual.
After that u can try my script, it's not perfect but it is pretty useful.
http://code.google.com/p/android-inside-tool/
There some user data to fill in and it need to be root for some command. If you need help to use it (if you want to), fell free to ask.
I have a MacBook Pro with a non-working windows partition. (I installed Ubuntu and the grub-loader took over and killed it.) I did it because I wanted to make my macbook strictly Mac (I know, crazy, right?). BUT I still want to root my DX2 (2.3.4). Do they have a one-click-root method for mac users?
yondercomesthetrain said:
I have a MacBook Pro with a non-working windows partition. (I installed Ubuntu and the grub-loader took over and killed it.) I did it because I wanted to make my macbook strictly Mac (I know, crazy, right?). BUT I still want to root my DX2 (2.3.4). Do they have a one-click-root method for mac users?
Click to expand...
Click to collapse
Try a virtual machine of some sort. VirtualBox has an OS X version. Download here. VirtualBox is what I use to mod everything on my X2, because I don't want the Motorola bloat on my main OS.
I dont think a virtual machine will work with the USB interface, I think the native OS will intercept it on the phone reboot leaving in the middle of the rooting process.
heres a link for OSX goto the 3rd post - h t t p: / / rootzwiki.com/ showthread.php? 3714-ROOT-UNROOT- Droid-3-root-instructions-%28 One-Click- added- for- Windows-Linux-OSX%29
delete spaces (not enough posts for links yet)
you should be able to run it in terminal by "sh run_to_root_your_droid3.sh" or "./run_to_root_your_droid3.sh"
hamburgerman said:
I dont think a virtual machine will work with the USB interface, I think the native OS will intercept it on the phone reboot leaving in the middle of the rooting process.
heres a link for OSX goto the 3rd post - h t t p: / / rootzwiki.com/ showthread.php? 3714-ROOT-UNROOT- Droid-3-root-instructions-%28 One-Click- added- for- Windows-Linux-OSX%29
delete spaces (not enough posts for links yet)
Click to expand...
Click to collapse
The USB interface does work. After you install an OS into a virtual machine you have to shut that VM down and go to settings and tell the VM what USB devices you want it to take over when the VM boots up. This works, I use it every time I have to do something on my X2.
EDIT: Keep in mind the X2 has different USB interfaces depending on what mode of USB you tell it to use, and you must assign them all to that virtual machine for it to recognize the phone right away. (Also don't forget to turn on USB debugging on your X2 before trying to root)
My linux boxes VM usally intercepts before VMware has anytime to push it to windows even when I assign it, must be different in OSX. Try the link above and just run the content in terminal on your mac. You should be able to run it in terminal by "./run_to_root_your_droid3.sh" and just follow the command prompt
http://www.youtube.com/watch?v=aPqtk3GEXVk&feature=youtube_gdata_player
Just copy what he does exactly. Worked for me.
Tapatalkin' from my eclipsed DROIDX2
A lot of the development that has (is) taken place for our Nook's is performed by the developers in Linux. As such there are a few posts in the development thread that offer "Linux Only" solutions.
We already have the Original ClockWorkMod (CWM) installation instructions, AdamOutlers Ubuntu Recovery and others.
People have also been recommended to re-format their bootable SD Cards using a program in Linux called Gparted. I can verify that this program works great but I'm sure I'm in the minority with having access to a Linux Machine. This thread is here to offer some suggestions.
To my knowledge you have these options:
1. Run Linux in a Virtual Machine (VM)
2. Create and boot from a Live CD/DVD
3. Create and boot from a USB Stick
4. Install Linux on a separate machine
5. Dual Boot
I personally run a MAC and run Linux in a VM. I use a program called Parallels. This is NOT a free solution but if any of you run a MAC I can recommend this program highly. However this thread is dedicated to those Windoze Users so let's press on.
Virtual Machines
VM's are great tools that allow you to try almost all available OS's on your machine with no damage being done to the actual file system of the "Host" operating system which in this case is your windows machine. The "Guest" operating system is typically contained in one single file or a single folder so the entire machine can be backed up easily. This method may be a little more advanced then the method's I will outline below but in my opinion it is well worth it. VM's are fun and once you get the hang of them you will be installing a bunch of new operating systems just to "fiddle".I have a version of Dos 6 running in a VM just because I can. LOL
Virtual Box is a free VM for Windows and I believe they even offer pre-built Linux Distro's that you simply download and open once the main VM software is installed.
VMware Player is also free.
Live CD's/DVD's
Live CD's are great for a quick format job's such as those found here in the Forum's. The downside is that they are a little slower and changes you make while the system is running are lost.
Knoppix
Ubuntu is the distribution recommend most. This link brings you to a download page where you can select either a Full Install Version, a Live CD Version or a Flash Drive version.
The LiveCD List Too many to mention. Check it out.
USB Stick
Advantages to a USB stick is that you can make the file system mountable and changes you make to the system can be made persistent meaning the next time you boot your changes will be saved. It is also a tad bit faster then the live CD but a little more difficult to make. Not much though
Ubuntu same link as above.
Linux Live USB Creator is a cool application that you install and it talks you through the steps. Once Installed I believe it will even provide you with a list of available distributions and download it for you. It will then use the download to create a bootable USB stick.
PenDriveLinux is the same premise as Linux Live. It will talk you through the steps.
Full Installation
This method is obviously for more advanced users and requires a computer that you will dedicate to running linux. If you fit these qualifications it is a rather fun experience and a great learning tool.
Ubuntu I'm linking this again because it is the same area you would obtain the Full Version of the software to download.
Linux Distro Watch contains a complete list of the most recent Linux Distro's. Pick a flavor and read up on how to install.
Dual Boot
AdamOutler has suggested that this Section be added. Dual booting is an option that replaces your boot loader with an "option" screen allowing you to select which OS you wish to boot. I honestly can't recommend this to beginners and even though I consider myself more of an advanced user, I have experienced issues with this in the past. Simply put if that boot-loader somehow gets corrupted you can render the entire machine inaccessible. Mind you it has been a LONG time since I used a dual-boot solution and I'm sure the methods have improved significantly over the years. Adam has mentioned that the Live-CD and USB-Stick versions offer you the option to install the boot-loader now. Like I said, once I went to VM's I haven't looked back but this IS a viable option if you are so inclined. The advantage would be that your Linux Distro would run at full speed and would be just like having your own Linux workstation without the need to purchase or obtain additional hardware. Simply select the OS you wish to run (Windows, Linux, ETC.) and boot into that OS. Adam's post can be viewed HERE. Thanks Adam!
User Suggestions
Wubi was recommended by Veronica (Lavero.Burgos). It looks like it may be a pretty easy (and Cool) option. Give it a shot! Thanks Veronica!
Know-Fear has offer some additional Instructions in This Post. Good Information there. Give him a thanks!
Birdsbeaks recommends NOT taking the easy road if you are truly interested in "learning" Linux. He suggests that you start with a distro that has a "steeper learning curve". One of his recommendations was Slackware. He also prefers MINT over Ubuntu as he feels it is less "proprietary". You can read his full comment HERE.
By no means is this list even close to complete. I simply wanted to give you a starting point and the rest is up to you. I have tried a few of these solutions in the past but since moving to a VM solution that is where I stand. Since it has been awhile, your mileage may vary (YMMV) but this should get you started.
If you have questions feel free to post them and I will do my best to help you along but the best way to learn is to experiment on your own.
If anybody has tried other versions or solutions feel free to post them and I will update the Original Post (OP).
Have fun and good luck!
****Reserved*******
I choose to dual boot windows 7 and Ubuntu.
All the options you mentioned work. Probably a live CD or USB would be the best bet for most people, since most probably wont spend alot of time on it.
@LandMaster you forgot Wubi, also have anyone tested Ubuntu 12.04 LTS alpha? So far im researching about Cinnamon Linux Mint 12 which looks promising .
~ Veronica
lavero.burgos said:
@LandMaster you forgot Wubi, also have anyone tested the new 12.04 LTS alpha of Ubuntu? So far im researching about Cinnamon Linux Mint 12 which looks promising .
~ Veronica
Click to expand...
Click to collapse
Added. Thanks!! Looks cool. I had never heard of it
What is this Windows you speak of.
don't forget to add in the full installation that most Live CDs and USB sticks will give you the option to run "side-by-side" or "Dual-boot". Personally, I'd just wipe Windows from the computer, if you need it back for some reason just use your quick restore disks.
I run a dual boot on my netbook because I have some hardware that requires Windows. Other than that, I can run about 3 separate virtual machines at the same time within Linux and everything works fine... Windows xp, Windows 7 and OS-X Lion all run fine in virtual machines within Linux. With guest additions, you can make them full-screen or share your desktop with the virtual machine so "Windows" windows appear in the same space as the Linux windows.
AdamOutler said:
don't forget to add in the full installation that most Live CDs and USB sticks will give you the option to run "side-by-side" or "Dual-boot". Personally, I'd just wipe Windows from the computer, if you need it back for some reason just use your quick restore disks.
I run a dual boot on my netbook because I have some hardware that requires Windows. Other than that, I can run about 3 separate virtual machines at the same time within Linux and everything works fine... Windows xp, Windows 7 and OS-X Lion all run fine in virtual machines within Linux. With guest additions, you can make them full-screen or share your desktop with the virtual machine so "Windows" windows appear in the same space as the Linux windows.
Click to expand...
Click to collapse
I added a dual-boot section to the OP. I'm out of thanks for the day. I'll hook you up later.
Totally agree about Windoze. I have a really good laptop that runs Win 7 and it would take me about an hour just to clean the dust off of it.
As this guide is for "beginners" I didn't really want to tell them to forego windows and wipe their boxes. Hopefully they will come around once they have a chance to experiment with Linux.
AdamOutler said:
don't forget to add in the full installation that most Live CDs and USB sticks will give you the option to run "side-by-side" or "Dual-boot". Personally, I'd just wipe Windows from the computer, if you need it back for some reason just use your quick restore disks.
I run a dual boot on my netbook because I have some hardware that requires Windows. Other than that, I can run about 3 separate virtual machines at the same time within Linux and everything works fine... Windows xp, Windows 7 and OS-X Lion all run fine in virtual machines within Linux. With guest additions, you can make them full-screen or share your desktop with the virtual machine so "Windows" windows appear in the same space as the Linux windows.
Click to expand...
Click to collapse
Nice!. Adam i have a question for you, i have a netbook as well HP110CA(that gave to bf) 1GB of ram and im having issues with linux on it. It came with windows XP off course and i had to format it twice because it got viruses while in Canada, so i just wiped out and put ubuntu 10.10 in that time. At first was running ok but eventually it started to freeze, later on upgraded to 11.04 and it messed things up so i decided to try other "light" distro and i put Jolicloud(based on ubuntu) again started running fine but keeps freezing and more often, now i don't know what else to put in i was thinking on Puppy linux lol but im not sure why it freezes that much. When i had it with windows it never froze though but i don't want to go back to windows only if its my last resource. What would you recommend? im starting to think its a hardware failure and that linux is too much for that poor machine .
~ Veronica
Hell yeah but I think I messed up bc i. Put the disk in and restarted and it to me to a black screen with cursor so i even up have to goto bios or cmos one of those and change first boot to dvd so hopefully after I'm done with this I. Can get back to windows hopefully my drive order is correct
___________________________________________
Sent from my PG86100-EVO3D-using Tapatalk Born Jan 5th 84 and still getting it in eeee
Anon9mouz said:
Hell yeah but I think I messed up bc i. Put the disk in and restarted and it to me to a black screen with cursor so i even up have to goto bios or cmos one of those and change first boot to dvd so hopefully after I'm done with this I. Can get back to windows hopefully my drive order is correct
___________________________________________
Sent from my PG86100-EVO3D-using Tapatalk Born Jan 5th 84 and still getting it in eeee
Click to expand...
Click to collapse
Yup... When booting from a USB drive or CD the boot order must be set in the bios. I recommend just leaving it as:
1. DVD/CD Rom
2. USB
3. C drive
This way here if 1 & 2 are not attached it will boot from the "C Drive"
I would unplug the hard drive if I were the noobs just in case. That way the noobs wont accidentally wipe their Hard drive
My recommendation for "beginners" would be to try Ubuntu in a Virtual machine ( i use Vmware and love it, has never let me down) and you can still work in your Windows interface, it is also easy to share files between windows and your virtual machine.
It is enough for all the sdcard mods and even adb if you want to set it up there too. I prefer this way rather than Wubi because i can work faster that way, i don't need to reboot to boot into windows, i have all i need in the same place .
~ Veronica
I prefer running either zen-mini or pclos gnome in virtualbox myself
Anon9mouz said:
Hell yeah but I think I messed up bc i. Put the disk in and restarted and it to me to a black screen with cursor so i even up have to goto bios or cmos one of those and change first boot to dvd so hopefully after I'm done with this I. Can get back to windows hopefully my drive order is correct
___________________________________________
Sent from my PG86100-EVO3D-using Tapatalk Born Jan 5th 84 and still getting it in eeee
Click to expand...
Click to collapse
This happens when you use a 64 bit Linux on a 32 bit system. Also when you have a bad copy. Burn at a lower speed. Try redownloading.
AdamOutler said:
...
I can run about 3 separate virtual machines at the same time within Linux and everything works fine... Windows xp, Windows 7 and OS-X Lion all run fine in virtual machines within Linux.
...
Click to expand...
Click to collapse
It's been a couple years since I tried running OSX on non-apple hardware / in a vm. Can you point me to a good resource for this?
I don't always use virtual machines, but when I do, I use VirtualBox. Mostly because it's free.
I have ubuntu 11.10 on my netbook and, while I like the interface, it seems like things get a little slugish at times. Anybody out there know of a good distro for netbooks?
RadicalAns said:
I don't always use virtual machines, but when I do, I use VirtualBox. Mostly because it's free.
I have ubuntu 11.10 on my netbook and, while I like the interface, it seems like things get a little slugish at times. Anybody out there know of a good distro for netbooks?
Click to expand...
Click to collapse
I don't always drink beer, but when I do... Oh wait .... getting sidetracked..
I just did a quick search and believe it or not Ubuntu leads the ranking's on This Page
I remember putting the "Netbook Remix" on an older netbook and it ran OK but not great from what I recall. From quickly glancing at this article it sounds like that version has been merged with the main distribution. You may be able to locate a copy of it though and try it out.
Yeah I really like 11.10 for my netbook. I think I may end up just upgrading the ram on the little bugger. It's nice having a Linux machine that I can muck around on while watching TV w/ the wife.
lavero.burgos said:
Nice!. Adam i have a question for you, i have a netbook as well HP110CA(that gave to bf) 1GB of ram and im having issues with linux on it. It came with windows XP off course and i had to format it twice because it got viruses while in Canada, so i just wiped out and put ubuntu 10.10 in that time. At first was running ok but eventually it started to freeze, later on upgraded to 11.04 and it messed things up so i decided to try other "light" distro and i put Jolicloud(based on ubuntu) again started running fine but keeps freezing and more often, now i don't know what else to put in i was thinking on Puppy linux lol but im not sure why it freezes that much. When i had it with windows it never froze though but i don't want to go back to windows only if its my last resource. What would you recommend? im starting to think its a hardware failure and that linux is too much for that poor machine .
~ Veronica
Click to expand...
Click to collapse
Can someone help me with this one plz i don't know what else to install it lol oh well maybe i end up going back to windows XP.. sigh
~ V
So, last night i tried to flash GtabComb to my 1.1 Gtab. After 3 unsuccessful installs (which I now believe are attributed to the system partition size of only 200 rather than 250 [help here would also be apprciated]) i downloaded the latest Rom Manager and updated ClockWork Mod. After the initial scare that my SD card had been totally formatted, i found that for some reason, this new CWM likes to use the second SD card... You know, the one with no backups or anything saved to it. For now, I am running a random ROM (Vegan Gingerbread) until i find out how to switch the SD card read by CMW. So any help guys? It's probably something really simple I'm over looking.. Help is appreciated greatly. Thanks
Edit: On a side note, I finally got GtabComb to load on my tablet! Seems I only needed a little bit of patience...
theshafe said:
So, last night i tried to flash GtabComb to my 1.1 Gtab. After 3 unsuccessful installs (which I now believe are attributed to the system partition size of only 200 rather than 250 [help here would also be apprciated]) i downloaded the latest Rom Manager and updated ClockWork Mod. After the initial scare that my SD card had been totally formatted, i found that for some reason, this new CWM likes to use the second SD card... You know, the one with no backups or anything saved to it. For now, I am running a random ROM (Vegan Gingerbread) until i find out how to switch the SD card read by CMW. So any help guys? It's probably something really simple I'm over looking.. Help is appreciated greatly. Thanks
Click to expand...
Click to collapse
The best way to install CWM is through NVflash. Rom manager is really designed for phones not this tablet. NVflash is simple and easy to use as long as you have a desktop or laptop using either windows or Linux. Here is the link to guide you through those steps. Helped me out when I was in a jam.
http://viewsonic-gtablet-for-dummies...om/nvflash.htm
Thanks for the advice! NVFlashing is a tad of a problem for me, however. I've actually commented on that particualr NVFlashing tutorial earlier today explaining how my computer won't recognize my tablet while it's in APX mode. I seem to have the worst luck with this kid of thing..
Would there another way to change which card is being read?
Do not use Rom Manager on the Gtablet it will mess things up. You can go to this link and download a .zip installable version of CWM for your bootloader. There are versions for installing from either the internal or external sdcard. If you are not installing from the external sdcard, it is best to remove it.
You could also check out this thread, and this one for more info.
It sure does mess things up! And that CWM.zip would be great had I not had another (worse) version already installed.. woe is me. I'll give those threads a read tomorrow and hope something turns up. Thanks for the links!
DaggerDave said:
Do not use Rom Manager on the Gtablet it will mess things up. You can go to this link and download a .zip installable version of CWM for your bootloader. There are versions for installing from either the internal or external sdcard. If you are not installing from the external sdcard, it is best to remove it.
You could also check out this thread, and this one for more info.
Click to expand...
Click to collapse
That would be the way to go but if you can't access the current CWM you cannot get it to install anything. The only other alternative would be to figure out why the computer won't recognize the tablet in APX mode. What OS are you trying it with?
Try this:
Download this .zip file and extract it to your Gtablet's sdcard.
Using a root file manager (ES, Root Explorer, etc.) mount /system as read-write (rw) and move the downloaded files in each folder to their proper locations (copy the system/etc/recovery folder into /system/etc and the files in system/bin into /system/bin) and make sure all the permissions are correct. The recovery images should be -rw-r--r--, the scripts inside of /bin should be -rwxr-xr-x and flash_image should be -rw-r--r--.
Open a terminal emulator and type 'su' (without quotes) and allow SuperUser when it asks. Your shell prompt should go from a '$' to a '#'. Now type 'cwmrecovery.sh' (without quotes) and enter. That should install cwm-08 for you, just exit when it finishes and try to reboot into recovery. You can use the 'fixrecovery.sh' script to flash the stock 1.1 recovery if you ever need to.
See the last thread I linked to in my last post for more info on this. Good luck!
DaggerDave said:
Try this:
Download this .zip file and extract it to your Gtablet's sdcard.
See the last thread I linked to in my last post for more info on this. Good luck!
Click to expand...
Click to collapse
Just extracted to the external SD that was being read from and updated from there with the new CWM and bam! .08 is on and working like a charm. Many thanks!
nobe1976 said:
Another alternative would be to figure out why the computer won't recognize the tablet in APX mode. What OS are you trying it with?
Click to expand...
Click to collapse
I would love to know why it doesn't. I was previously using a froyo tap'n'tap, but now I am running 3.0.1. Would OS make a difference? I always assumed it was my tablet/PC's/luck
I would love to know why it doesn't. I was previously using a froyo tap'n'tap, but now I am running 3.0.1. Would OS make a difference? I always assumed it was my tablet/PC's/luck[/QUOTE]
The OS on the tablet doesn't matter since the APX mode is the tablets download mode. The OS on you computer is what might be the issue, or could even be just a bad USB port or even drivers being used. If the computer keeps promptings that software needs to be installed. Guied the it to install them from the extracted NVflash file and install the ones that are in the pack.
I would love to know why it doesn't. I was previously using a froyo tap'n'tap, but now I am running 3.0.1. Would OS make a difference? I always assumed it was my tablet/PC's/luck
Click to expand...
Click to collapse
As the post above said, the OS on your PC is probably your problem. Which OS are you using? WinXP, Win7? I can't for the life of me get Windows7 to recognize my ICS Gtablet but o'well!
If you are comfortable with using or trying Linux, you could try installing Knoppix on a USB drive and run that. I think Knoppix has everything set up for MTP & ADB already and is 'live' so no real configuration is needed to get it running (except for your wifi of course). Just use the Linux version included in most NvFlash packages. If you have a fairly powerful computer, you could also try running Linux in a VM, but Knoppix doesn't run in a VM very well.
My favorite is Arch Linux (not in a VM). Although you have to build and configure the system yourself from the ground up. Since I started using Linux I have really enjoyed it. It is much faster than Windows, more secure and gives me less problems than the Win PCs I deal with. Check out this site if you are interested in Linux.
DaggerDave said:
As the post above said, the OS on your PC is probably your problem. Which OS are you using? WinXP, Win7? I can't for the life of me get Windows7 to recognize my ICS Gtablet but o'well!
If you are comfortable with using or trying Linux, you could try installing Knoppix on a USB drive and run that. I think Knoppix has everything set up for MTP & ADB already and is 'live' so no real configuration is needed to get it running (except for your wifi of course). Just use the Linux version included in most NvFlash packages. If you have a fairly powerful computer, you could also try running Linux in a VM, but Knoppix doesn't run in a VM very well.
My favorite is Arch Linux (not in a VM). Although you have to build and configure the system yourself from the ground up. Since I started using Linux I have really enjoyed it. It is much faster than Windows, more secure and gives me less problems than the Win PCs I deal with. Check out this site if you are interested in Linux.
Click to expand...
Click to collapse
To top on this excellent information. If you decided to try a Linux disto I would recommend a version of Ubuntu, doesn't really matter which one they are all really user friendly and depending on you pc setup depends on which version of it you can use. I have 11.05 installed on a 2nd partition for doing my Droid stuff on a computer that is around 9 years old, runs smooth. Windows xp is the other alternative which I have used several times NVflashing stuff, but adb seems to run better through Linux in my opinion.
Ah, mind went blank there. Right now, all I have is a windows 7 laptop (my XP desktop and older Vista laptop are probably long gone) Ive attempted to flash before with the vista laptop to no avail. In both instances, I connect the tablet in APX and it was not even recognized as a connected device. I'm hesitant to run Linux, even from a flash drive. If I get the chance to soon, I may very well end up doing it, as it appears the ONLY option.. Thanks for your help guys. If you could think of anyway for Windows 7 to recognize my tablet, please let me know. You guys are a great help. Thanks again!
If you haven't already tried this maybe it will work for you.
- Put the tablet into APX mode, then plug in the USB. Windows7 will drag on then fail installing the drivers, as usual.
- Go to Control Panel->Hardware and Sound->Device Manager and find the '!' (unknown device)
- Right click and choose Properties, then Uninstall Driver (if it is an option)
- Next, click on Update Driver, then choose Browse My Computer ...
- Navigate to the NVFlash folder (the one you extracted from the nvflash .zip you downloaded)
- Open the folder inside called 'usbpcdriver' or similar, and select the .inf file (NvidiaUsb.inf) and choose to install it. Once it installs, it should recognize the tablet as a MTP device. If not turn off the tablet, unplug the USB, restart Windows and plug it back in when it is finished rebooting and start the tablet in APX mode again. If it still doesn't recognize it try the whole process over agian.
I can understand being hesitant toward running Linux but running from a flash drive or in a VM is pretty safe, as in if you mess up the OS you can always start over without damaging Windows. Done it many times! Try running Ubuntu in a virtual machine such as Virtual Box, it is almost as user friendly as windows and you can have the VM capture USB devices such as the Gtablet which Ubuntu should recognize. Probably won't run very fast on a laptop but if you have at least a dual core with 2 GB of ram it should be pretty smooth.
Not trying to push Linux on you or anything, just some suggestions. From what I hear most of the Gtab devs use Windows7 and it seems to work great for them!