is there a way to calibrate the accelerometer, it is way too sensitive, sometimes when im holding the phone on my palm to read email/text/webpage it auto rotates because i tilted it a TINY little bit.
i downloaded the app gps status, it has this crosshair thing to see which way you are pointing the phone towards, and it should be dead center if it is laid flat on a flat surface, but its shifted towards bottom left a bit.
i'm wondering if anybody has this problem also.
Maybe your flat surface isn't entirely level.
Related
Ok, probably not. There's gotta be a perfectly valid explanation, but I just noticed this:
When I open Albums on my Hero and look at a single photograph, I can zoom in and out by pinching. Same goes for web pages. We all know this.
But the thing is: if I put my phone down on the table and try to pinch with just one hand (thumb+index finger), it doesn't work!
I only need to touch the phone with one finger on my left hand and it starts working. I have to touch the back or the frame. The chin doesn't react.
I tried it on an iPhone and it works with only one hand. It must be some conductivity issue and the Hero simply has a touch screen that works differently from iPhones.
It isn't really a problem for me: I can hold the phone in both hands while pinching. I just found it slightly interesting...
Yeah I have noticed that as well. Although if you try to calibrate using the g-sensor calibration tool it sometime fixes the issue...
Clue is in the technology? Capacitative touch screen....hit the physics books guys
A good capacitive screen doesn't require the user to complete a circuit with the phone using another hand to hold it, or by touching the bezel with a finger. The problem is either in the circuitry driving the touchscreen or possibly with the algorithms used to establish finger gestures and position.
It's even feasible that the metal bezel interferes with the electrostatic field introduced when your finger is in proximity with the screen. This would explain why the sensitivity is reduced around the edges of the screen.
Spose you need to form a complete circuit for it to work. Interesting point though, I didn't know that capacitive screens needed a second 'plate' to work (i.e. more than just the screen alone).
Makes sense though if you think about it.
Q.I indeed
jayjay said:
Ok, probably not. There's gotta be a perfectly valid explanation, but I just noticed this:
When I open Albums on my Hero and look at a single photograph, I can zoom in and out by pinching. Same goes for web pages. We all know this.
But the thing is: if I put my phone down on the table and try to pinch with just one hand (thumb+index finger), it doesn't work!
I only need to touch the phone with one finger on my left hand and it starts working. I have to touch the back or the frame. The chin doesn't react.
I tried it on an iPhone and it works with only one hand. It must be some conductivity issue and the Hero simply has a touch screen that works differently from iPhones.
It isn't really a problem for me: I can hold the phone in both hands while pinching. I just found it slightly interesting...
Click to expand...
Click to collapse
The metal bezel actually acts like a ground point between the capacitive circuitry and your finger. When you are touching at the very edges of the capacitive area there simply isn't enough room to get a good grounding point so the driver/controller gets a hard time of locating what points are actually grounded. The bezel helps in this regard.
Switchbitch said:
A good capacitive screen doesn't require the user to complete a circuit with the phone using another hand to hold it, or by touching the bezel with a finger. The problem is either in the circuitry driving the touchscreen or possibly with the algorithms used to establish finger gestures and position.
It's even feasible that the metal bezel interferes with the electrostatic field introduced when your finger is in proximity with the screen. This would explain why the sensitivity is reduced around the edges of the screen.
Click to expand...
Click to collapse
...perhaps not then lol
Yeah, well I hate to be the one to ask, but why does it work on the iPhone then? I realize it's a grounding / closed circuit issue, but if another similar phone can do it, then there's obviously a way around it.
And another question: Why doesn't pinching work, but normal one-fingered touching does?
Only place where I could see this becoming a problem is when you dock your device to some plastic holder in a car and want to pinch to zoom in some navigator software. Letting go of the steering wheel to use two hands on your phone isn't necessarily the safest thing in the world. One would assume though, that the interface in any navigator software wouldn't require complex gestures while operating it...
i confrim, using hero without touch the metal edge result in less responsivity and difficult on multitouch operation
hope new firmware can solve this, too many errors using it like a normal keyboard on a table!
Hero Screen Anomaly:
I found this out purely by chance. The sensitivity of the screen on the HTC Hero severely decreases when the phone is laid on a flat surface,with normal G-Sensor calibration.
However, if you place the phone upright and calibrate the G-Sensor such that the phone "thinks" it's on a flat surface, the screen sensitivity becomes normal when the phone is again laid on a flat surface. Has anyone else experienced this? Is this by any chance a power saving feature?
mine does the same thing. I think it has something to do with the accelerometer conflicting when laying down, which causes it to not respond to a press of the finger.
Yes, I've noticed the same thing. Specially on the right edge of the screen.
Right edge? Interesting. So it might not be a power saving feature? Ha-ha. Guess it's not that much of an annoyance to you guys too?
problem: certain area of the touchscreen jumps when pressed. In my case it's over s and z of the keyboard in vertical mode.. effectively preventing me from typing s or z.
possible cause: that's exactly the area that I use to scroll. so it's definitely a high usage area.
quick research: humidity can cause screen to do weird things like that.
quick solution: wrapped the phone without battery in plastic wrap and dumped it into a container used to hold dried almonds along with 2 packs of those humidity absorbers that you aren't suppose to eat.
well. wish me luck
Does it only happen when using keyboard?
maybe try a different one?
For anyone who is interested, here is my method for fixing the black unresponsive screen during a call.
Like most of you reading this message I had the dreaded black screen during a phone call, which makes it impossible to end the call or dial numbers for automated systems. A lot of suggestions and fixes included blowing into the upper right corner of the phone or into the ear piece. This doesn't work (or it didn't for me) because the proximity sensor which you are allegedly blowing dust off of is pretty well sealed against the outside world. I'm on firmware 1314, which is supposed to have fixed the issue, but did not.
What did work every time was to pinch the phone front to back at the upper right corner right around where the proximity sensor was. I actually later found out you could pinch the phone anywhere in the upper half and the screen would light up.
I opened up the phone, saw that the proximity sensor just kind of flaps freely with a metal back that touches what i think is a grounding plate on the frame. When you pinch the phone it shorts this circuit and makes the proximity sensor behave properly. To make the contact better I cut a piece of aluminum foil, folded it up a couple of times, and wedged it behind the proximity sensor. Put the phone back together, made a call, and voila - screen on away from my face, off when sensor is covered.
Here is a picture of what the proximity sensor looks like on the pcb. I just wedged the foil behind the circled piece and replaced everything.
http://imgur.com/dAqCBGd
This absolutely works for me, but YMMV. I used the youtube video from le55ons for disassembly instructions. It's fantastic.
Excellent work. Subscribing in case I get this issue in the future
Sent from my Nexus 7 using Tapatalk 4 Beta
Do you have a screen protector installed. I did and it covered the proximity sensor, which gave me issues, took it off, no issues
mikeschevelle said:
Do you have a screen protector installed. I did and it covered the proximity sensor, which gave me issues, took it off, no issues
Click to expand...
Click to collapse
I didn't have a screen protector on, but i can see how it would cause a problem if it covered the sensor. Now that it's working properly I can see how sensitive it is. If i hover my finger an inch over the sensor, the screen will go dark.
I think I might have an issue with touchscreen sensitivity along the left edge of my new Amazfit BIP...
If examined properly, there is noticeable difference between touch sensitivity along the right vs. the left screen border with right side being super-sensitive and left side less so (and center being 'normal').
The least sensitive part of the screen is around the left corner closest to 'Amazfit' below the screen.
This isn't really noticeable unless you look for it because most of the time people navigate using the central portion of the screen, but this problem kind of tickles my OCD anyway.
Did anyone notice this or is it just me?
Please, check it by touching very lightly and gently in the corners... Does the watch registers every touch - every time, uniformly?
Thank you!