This is a problem for me for 3 days now. I installed WanamLite first, then tried Leomar's ROM. I accidentaly noticed this. I tried changing ROMs, Kernels and even done a Factory Reset. But nothing helps.
What are the possible fix for this?
Samsung Galaxy SII
Leomar75 Revolution ROM
CF-Root Kernel
happens to me on Batista Foxhound 2.1 as well... anyone?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Related
Hi just a couple of questions, i have had a look for the answer but no luck so far.
My phone details - Samsung Galaxy S II i9100
Kernel - Chainfire kernel XXKI4 with CWM and Power user already installed
Firmware 2.3.4
1. I want to flash CM7 to my phone but i want to keep all my settings, apps and data. So when i have CM7 installed i can just apply all my data, apps, settings etc. Is this possible
2.Can i use CWM to to install the rom or do i have to use rom manager, are their any noob tuturials that i can read about
3. Is their any good alternatives to CM7 that i could look it first
Thanks
Questions 1 and 2 are covered in the CM7 Q&A thread. Question 3 is impossible to answer.
Thanks for the quick responce
Problem Solved
Hi all!
I'm sorry if this question been asked before! which i see it has ! But I'm confussed to what to do! As there are several different answers to the same question ???????
So this is my problem!
I have a Galaxy s2 i9000 which i updated the ROM to Resurrection Remix ICS v1.0 by westcrip. a few months back!
All went ok. Rooted phone using odin and “CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar” from galaxy s2 root.com.
got it all working and all great till It came to other day! I wanted to udate to Resurrection remix 2.6 or v3.0 ??
But when it came to CWM - it kept coming up with
This version of CWM Manager should be used with CF-Root v5.0 or newer. It appears you are running a different kernel. Various features have been disabled.
including the backup and recovery! I've tried ROM manager too. that says that I have CWM 2.5.1.2 and also CWM touch not available for this device. my phone is rooted. I have Su0.93,busybox v1.17.1
BUT NO JOY !! I tried to backup on there too and just takes me to CWM with no backup on the menu..
I always like to do a backup in case of problems! But cant in this case!
I read that flashing kernel could work! But as I'n not 100% which one to use! I'd be happy of any advise! I really would like to update now! As Res V2.6/v3 look great! so does the Salman ICS ROM..
I was thinking of flashing Siyah Kernel v.3.3.2 for Galaxy S2 i9100! [ICS] - but read somewhere this has problems with Res v2.6..
Can some1 please just tell me in simple terms, What is the best way to go about doing this! and if have to use new kernel which one and where?? I really would be most grateful of the help !!
Many Many thanks in advance .. A person who don't want to mess his much loved s2 up !!!!
Coxy...q said:
Hi all!
I'm sorry if this question been asked before! which i see it has ! But I'm confussed to what to do! As there are several different answers to the same question ???????
So this is my problem!
I have a Galaxy s2 i9000 which i updated the ROM to Resurrection Remix ICS v1.0 by westcrip. a few months back!
All went ok. Rooted phone using odin and “CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar” from galaxy s2 root.com.
got it all working and all great till It came to other day! I wanted to udate to Resurrection remix 2.6 or v3.0 ??
But when it came to CWM - it kept coming up with
This version of CWM Manager should be used with CF-Root v5.0 or newer. It appears you are running a different kernel. Various features have been disabled.
including the backup and recovery! I've tried ROM manager too. that says that I have CWM 2.5.1.2 and also CWM touch not available for this device. my phone is rooted. I have Su0.93,busybox v1.17.1
BUT NO JOY !! I tried to backup on there too and just takes me to CWM with no backup on the menu..
I always like to do a backup in case of problems! But cant in this case!
I read that flashing kernel could work! But as I'n not 100% which one to use! I'd be happy of any advise! I really would like to update now! As Res V2.6/v3 look great! so does the Salman ICS ROM..
I was thinking of flashing Siyah Kernel v.3.3.2 for Galaxy S2 i9100! [ICS] - but read somewhere this has problems with Res v2.6..
Can some1 please just tell me in simple terms, What is the best way to go about doing this! and if have to use new kernel which one and where?? I really would be most grateful of the help !!
Many Many thanks in advance .. A person who don't want to mess his much loved s2 up !!!!
Click to expand...
Click to collapse
siyah v3.3.2 has no problem of any sort ma8 its a very stable one u can flash it without any issues.
also u have the latest versions like 3.4.1 and 3.5.2(which supports Jelly Bean)
i was using 3.3.2 on RRv2.6 and it had a very good batt life and performance for sure
Hi Guys,
Okay. I am a noob and I hate being a noob, and when I registered for the site I watched the noob video. Whilst I did do my research on xda, androidforums etc. I feel I still need your assistance before I go on to ruin something.
Phone: Galaxy S II
Location: Australia
Network: Vodafone
Kernel: XXKF2
Rom: Litening Rom v1.5 XXKF2
Android Version: 2.3.3
Mode: GT-I9100
Symptons: Low internal storage, drained battery, when charging or in use, can get very warm near the camera lens.
I've actually had a great run with Litening Rom until one day I woke up and my alarm went off for work. I went to turn it off and the battery was so hot I could've started scrambling some eggs. In a state of panic, I turned the switch off and the battery charge for 6hrs was 5% - wtf. Long story short, I've searched and found many threads with many different unofficial responses. I'm to the point where I'm deciding to go back to stock or to another rom. Most of the download links I've searched on XDA seem to be invalid (i.e stock Kernel XXKF2 and Litening Rom v3.2).
In anycase, do I need to:
1. Download specifically the XXKF2 kernel? Or can I try another? If so, can anyone direct me elsewhere as god knows I've tried.
2. Anyway to remove rom on its own? I've got Odin etc.
3. Can I also clarify that when I rooted the phone to the Litening Rom, does that change the stock Kernel? If not, then perhaps I just need to goto point 2 above.
Any assistance would be grateful.
Thank you.
Hey mate.
When you flashed the custom ROM you would of also changed your kernel.
I would suggest trying Siyah kernel, I've used it and I had great battery life.
That should help sort out your other issues too
Good luck!
Youre talking abouth odin and lightning rom so youve rooted and flashed allready......so your a bit noob-off,but as above said try another kernel or better....flash an other rom.
Download some other roms, reboot in recovery, flash them try it for an day....with outh installing your app's , install your app's when youve got an rom of your choice/like's see what the battery drain does and the heat development at the back......try it greatz mike
Hi all!
Need some help here. Finally got the title right. Now here's my issue:
1. Different ROMs and kernels
2. Flash back stock ROM and kernels
3. Wipe everything using CWM and through the phone setting
4. Wipe cache and dalvik but not use clear data on CWM
The problem happens whenever I am flashing over stock (or anything close to stock) ICS. JB and GB roms have no problem but only ICS. So, what is wrong guys?
I am running out of ideas so please help. (p/s I did try to search here and Google but can't find an answer )
Why on earth did you create this new thread when a solution to your problem is already posted to their previous thread (which you also opened).
As a senior member, i expect you to follow the forum rules.
Thread reported!
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
Locked
hello .. im using the omega rom for my galaxy s3 international. i was on v.44 with no problems ... and update it to v45 i made a full wipe .. and since i update.. i am facing a sever freezes issues.. i need to remove the battery every 5-10 minutes... any suggestions ??
Best roll back to the version that worked and contact your ROM chef for help.
Try the Perseus kernel. *usually* these freezes are due to SDS fix. Even though you have V2 of this fix, Perseus uses a completely different fix which may help better.
also, read the "ultimate unusual freezing" thread in General
v45 is 4.2.2 so maybe u did not wipe properly.
And also hope u do not install perseus before changing your rom to v44. Perseus is not built for 4.2.2.