I tried to find the answer without posting a new thread. I honestly did. But I'm stuck and it's 6am and I thought I'd ask while I'm still semi-literate.
I soft bricked the **** out of my atrix. I was flashing an sbf to it using rsdlite. All was going smoothly BUT I am a jackass and my phone battery was like... 20% so it died halfway through and now, all I get is:
SVF: 105:1:2
Failed to boot 0x1000
NO OS Detected, Going to RSD mode,
a menu of options,
etc.
Now I made a factory dev cable by connecting the 5v to pin 4. So I can get this far without the stupid battery message. My problem is that I can't do anything else?! While before (when it was working) it came up in RSDlite when it was in RSD, now it doesn't
I reinstalled drivers and RSDlite, rebooted, tried different computers and tried differed USB ports...
I'm not sure what the problem is? I just cant get my computer to see it, even though it turns on and gives me the menu as soon as I plug it in. If I press the up volume key when I plug it in I get
SCF:105:1:2
Failed to boot 0x1000
PwrReason: Factory_Cable
PwrReason: Power_Cut
Starting Fastboot protocol support.
That's all I've got. Please guys, I really need my phone and I need to find a way to get that sbf on there!
Thanks
Edit: Just like to add that I'm running Windows 7, 32 bit with the latest drivers and rsd lite 5.3.1
Is there any chance the second time you are starting RSD you haven't opened the application using administrative privileges?
I'm assuming he knows you can't flash with a certain battery percentage. You've tried charging it and trying again right?
Thanks for the replies guys,
Admin privileges isn't the problem I'm sure of that.
I ran around the last few days trying to find somewhere to charge the battery (motorola phones are pretty much nonexistent in Australia) and try again, I just assumed the factory/dev cable would circumvent that problem. Anyway I had no luck so I bought a standalone charger off ebay which should come on monday.
I'll try when I get the battery charged and post the results in case anyone has a similar problem.
Fingers crossed!
Mine did that too cause I did the same thing and didn't fully charge my battery. Everything worked out when I let it charge for a little while.
Sent from my Atrix
Im curious my ATRIX came with gingerbread 4.5.91 if I messed something up how would I return it to stock what sbf should I use?
Sent from my MB860 using XDA App
How did you let it charge? Just plug it in and leave it at that bootup menu where it tries to go into RSD?
Nas939 said:
How did you let it charge? Just plug it in and leave it at that bootup menu where it tries to go into RSD?
Click to expand...
Click to collapse
you can pull out the battery and plug it into a wall charger, and it should boot into a charging mode.
if that doesn't work, you could also rip apart an old USB cable and connect the positive and negative wires to the positive and negative contacts of the battery while it's plugged into the phone - this will force a current into the battery and charge it up. you can look for a video on youtube that shows you how to do it if you just search 'charge any phone without a charger'
Can't you just do a factory reset?
In any case this should help you without having to flash any sbfs
http://www.technipages.com/2-ways-to-factory-hard-reset-motorola-atrix.html
If not then the sbf should be here:
http://forum.xda-developers.com/showthread.php?t=1125944
If you're on AT&T in the US I think you'd need the first one.
Related
Hey, for anyone who fails flashing their sbf and is about to crap their pants (me a minute ago)....
I just flashed an SBF (or failed flashing it) and holding volume up or down would not work when powering on. Out of frustration I let my device just sit there, and after a while it automatically went into RSD mode because it failed to boot.
Not sure if this is talked about anywhere else (I didn't find it when I searched for a solution) but if anyone else is lazy like me and tries to flash on their front USB ports, here ya go.
Sounds like your battery was to low to flash......happened to me...think it needs to be above 50% to even flash or it will fail everytime
unsane said:
Sounds like your battery was to low to flash......happened to me...think it needs to be above 50% to even flash or it will fail everytime
Click to expand...
Click to collapse
Oh word!?! I didn't think it would of played a major factor....quick question once I unlock the bootloader, which is the correct/preferred recovery program I should be using on my Photon cause I'm confused
I tried flashing it with 100% 90% 80% etc etc. Failed everytime. From what I've read that's just an issue. It fails when you flash it no matter what. And I downloaded a CWM custom recovery. And installed that onto my phone from fastboot.
http://forum.xda-developers.com/showthread.php?t=1218417
Go there, and follow the steps. Should work. Worked for me. But I had to use the stock color.
unsane said:
Sounds like your battery was to low to flash......happened to me...think it needs to be above 50% to even flash or it will fail everytime
Click to expand...
Click to collapse
Confirmed battery must be at least 50% to flash with RSD. It failed on me over and over again. I had to actually take the battery out and charge in an external charger for over an hour then it flashed fine.
Whats wrong with the front usb ports?
from what ive read i dont think you can charge your battery when your phone is in rsd mode.
i had to cut my usb charger and use the red wire on the "+" and the black wire where the "-" on the battery then i place the battery back in the phone and it will charge the phone while in rsd mode. and will keep it charging throught.
Hmmm this is why my phone isn't charging. Thank you. I have an extra cord laying around
Make sure your windows drive has around 2.5 GB of room before flashing.
i7vSa7vi7y said:
Whats wrong with the front usb ports?
Click to expand...
Click to collapse
They provide less power than the back ports. Ive always used my front ports for everything with my Photon though, through unlocking and all that and never had any issues.. I was way too lazy to pull tower out.. lol
Yea the back usb ports data transfer rate is two times faster than front usb ports. I've noticed when transferring music.
Sent from my Motorola Electrify using XDA
Hello, I've been using my old x2 as my PDA/MP3 player. I also have put custom ROM on it because... It's fun!!
What's not fun is my locked up phone, here's what occurred... I tried to sbf my phone and received an error flashing (had all correct Motorola drivers/rsd lite. So as it failed and never even cleared out my phone I decided to use my iso boot disk instead. The disk came up, ran normal, said flashing was complete..... nightmare began....
Now I cannot boot into recovery New/old. I can't boot the phone. I can't do anything. The phone starts, I get the Motorola dual core screen (can't hold volume keys to get to rsd/fastboot/etc. The phone will get to the point of booting but will come up with screen which says...
"Failed to boot number 4"
"Starting rsd....."
Then when I go into try anything rsd (iso disk or rsd lite) the phone will either shut off right away and loop sometimes to same screen. Or it will come back when plugged into pc saying battery (which is fully charged) is to low to flash....
I'm going crazy...
Are there any other restore tactics?
I can't erase battery stats because I have no recovery... I've always followed instructions and flash roms for nearly every manufacturer of phones over the years. I am stumped....
Sent from my Galaxy Nexus using xda premium
Disention said:
Hello, I've been using my old x2 as my PDA/MP3 player. I also have put custom ROM on it because... It's fun!!
What's not fun is my locked up phone, here's what occurred... I tried to sbf my phone and received an error flashing (had all correct Motorola drivers/rsd lite. So as it failed and never even cleared out my phone I decided to use my iso boot disk instead. The disk came up, ran normal, said flashing was complete..... nightmare began....
Now I cannot boot into recovery New/old. I can't boot the phone. I can't do anything. The phone starts, I get the Motorola dual core screen (can't hold volume keys to get to rsd/fastboot/etc. The phone will get to the point of booting but will come up with screen which says...
"Failed to boot number 4"
"Starting rsd....."
Then when I go into try anything rsd (iso disk or rsd lite) the phone will either shut off right away and loop sometimes to same screen. Or it will come back when plugged into pc saying battery (which is fully charged) is to low to flash....
I'm going crazy...
Are there any other restore tactics?
I can't erase battery stats because I have no recovery... I've always followed instructions and flash roms for nearly every manufacturer of phones over the years. I am stumped....
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
First, make sure the battery is charged up. You can't RSD without at least 20% battery. Simply plug it in and let it charge, then try again after about an hour.
Also, make sure you are using the correct SBF file. It could've been a bad download, or worse you flashed one for another phone.
I've had nothing but trouble RSDLite and personally only use sbf_flash. So using the iso boot disk is recommended by me.
Yes, I agree that rsd lite will never again be the way I go. The disk had been much handier. Only problem is that I was out of disks, I was also without my CD in the office. I have done plenty of rsd reboot/reflash. Didn't expect this which is why I then went, got my CD, tried again.
Strange thing is the disk is what brought the issue I have at hand to light. So...
I really appreciate the insight for future occurrence avoidance.
How would you suggest fixing problem at hand?
The battery is full charge... It's that 2.3.5 battery glitch still coming back to light. The battery should be full. Now I end up in that strange loop, I don't even know if my battery is now charging or not...
Ugh... I really wish I could figure out exactly where I went wrong as well.
Thanks again for the response!
Sent from my Galaxy Nexus using xda premium
Disention said:
Yes, I agree that rsd lite will never again be the way I go. The disk had been much handier. Only problem is that I was out of disks, I was also without my CD in the office. I have done plenty of rsd reboot/reflash. Didn't expect this which is why I then went, got my CD, tried again.
Strange thing is the disk is what brought the issue I have at hand to light. So...
I really appreciate the insight for future occurrence avoidance.
How would you suggest fixing problem at hand?
The battery is full charge... It's that 2.3.5 battery glitch still coming back to light. The battery should be full. Now I end up in that strange loop, I don't even know if my battery is now charging or not...
Ugh... I really wish I could figure out exactly where I went wrong as well.
Thanks again for the response!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
So you still only have access to RSD on the phone? Or did it accept the SBF? I'm thinking that you flashed another phone's sbf file.
Sent from my Nexus 7 using xda app-developers app
Yes, if you could re-read my first post for sake of my key stroke would be great. The phone does not boot I'll try and snap a quick pic with other phone and show what happens. This is only thing which happens in a complete loop... can't get into new or old restore/bootstrap. Can't get it to load any of the basic rsd menu options. If I plug into pc it tells me battery is not charged enough. Or just shuts down with disk or boot CD. It's insane!
It's most definitely the RIGHT folder. All of my phone have their own nearly organized files. None of them flash the same way. Droid X2, HTC EVO 4G, Galaxy Nexus..... Yeah, I know the files ok but good thought!
Sent from my Galaxy Nexus using xda premium
Sent from my Galaxy Nexus using xda premium
Have you tried to turn the phone off, put it directly into RSD mode then run RSD program with the correct SBF file?
That's the problem, I never can "put" it in to rsd mode. I start the phone simply by plugging it in it automatically boot into that loop. Nothing I've found will load such as restore, boot loader, etc.
When it says it's going into rsd, it either turns itself off when in that phase and I start rsd. Or it will give me an error stating battery is not charged enough (it's got a full charge, already tested with multimeter)
Sent from my Galaxy Nexus using xda premium
If you got a spare charger around can jerry rig it. If you know what im talking about. If that don't work with the battery issue then if your under contract I'd go get a replacement. Do it by phone as they will not check your device once you send it back.
I've got plenty of spare charger...
What do you mean "Jerry rig" though?
Sent from my Galaxy Nexus using xda premium
Cut the end off that plugs into your phone, then use the ground and hot wire inside the power cord. Put them on the correct ends of the battery without touching the others, can tape them to it then put the battery back in the phone making sure the wires don't move or touch anything else. Then have the one with wires on your battery plugged into the wall, the usb from your phone to your computer then turn RSD on your phone, then try to SBF it. If you still get that arrow do the other option and call and get a replacement. Ive saved a many of phones doing the jerry rigging of the charge. But if it works and you can SBF then when the steps are complete undo the wires and walla.
I like it!
Let me get some stuff together and put this to the test!
I'll post my results!
Thanks!
Sent from my Galaxy Nexus using xda premium
This is the EXACT thing that happened to me about to weeks ago when trying to SBF back to 2.3.4, a task that I've done many times.
I got the "failed to boot" etc screen that you have. Basically I kept trying to SBF (it still wasn't working) and eventually I got the "battery too low to flash" screen.
Since the battery wasn't actually charging at all because of this weird boot screen, I had to drive down to my local RadioShack where they had some device that would charge ANY battery. It was sweet, AND they let me use it for free at their store. So they popped my X2 battery in and I went to the nearest bookstore to get some work done. Came back two hours later and my battery was charged.
But that's all besides the point. Basically what I did to fix it was I kept trying to SBF and eventually it worked. I downloaded another 2.3.4 sbf file to make sure (even though I've used the same file many times) and I even downloaded a 2.3.5 sbf file and began "alternating" between the three in rsd lite, hoping that one of them would "catch". Eventually I believe my original 2.3.4 file caught and my droid was back to normal.
Sorry for your troubles! This problem sucked and it freaked me out a lot when it happened. But I think you'll be fine. Don't worry too much about it like I did!
Disention said:
Then when I go into try anything rsd (iso disk or rsd lite) the phone will either shut off right away and loop sometimes to same screen. Or it will come back when plugged into pc saying battery (which is fully charged) is to low to flash.
Click to expand...
Click to collapse
I have had problems with my DroidX2 not staying charged while being plugged-in to the a usb port on the computer ... I had to use a usb wall-wart for consistent chargeing.
So, if your battery is haveing trouble staying charged (or not) try connecting it to a usb wall-wart and let it charge for at least a couple (~2) hours.
Also, how old is the battery? (I'm pretty sure this has nothing to do with you issue, but it could affect chargeing and battery-life)
Disention said:
That's the problem, I never can "put" it in to rsd mode. I start the phone simply by plugging it in it automatically boot into that loop. Nothing I've found will load such as restore, boot loader, etc.
When it says it's going into rsd, it either turns itself off when in that phase and I start rsd. Or it will give me an error stating battery is not charged enough (it's got a full charge, already tested with multimeter)
Click to expand...
Click to collapse
The following steps can also be seen here -or- see the original sbf/rsd instructions (note: the sbf files are not available at this time)
key instructions at step #10:
With the X2 in a completely POWERED DOWN state, press and hold the volume up button on the top right hand side of the phone. While still holding the volume up press and hold the power button until the screen turns on. At the top of the screen you should see "Starting RSD protocol support" once this text appears you may release the volume up button.
Click to expand...
Click to collapse
i had flashed CM10 by dragonkiller and all was working fine. i was getting annoyed by minor bugs, so i decided to go to ecplise 2.3 (which was an upgrade from my last rom, eclipse 2.1). ive had it on the phone before and know what im doing.. started by SBFing to 2.3.4, but there was a problem right away. after RSD rebooted my phone i got stuck on the M screen with an error saying "modem failed to power up". since then i have not found a solution and nothing i have tried on my own has fixed the problem. trying to get the stock system recovery to run will display the error "battery is too low to flash" no matter how long i leave the phone charging.. please help! 2 days with no phone already, i cant afford a new one and i rely on this for work!
I've gotten that error message before and gotten out of it fine. First thing you will need to do is charge your battery. Find another Droid X2 or X user and swap batteries, buy an external charger, or take it to the store and *see* if they will charge it for you. After that replace the battery in the phone. With it off, hold volume up and power. When the screen turns on release power and continue holding volume up untill "starting RSD Protocol" appears... plug in and SBF as normal. You could also try the EzSBF but that did not work for me when i got the modem error. RSD should work assuming you have the proper drivers installed.
Likely what happened is your battery died mid flash or you had a bad SBF file and it failed the flash causing the phone to not be able to boot.
Happened to me before. As the software that charges your phone no longer exists, you can't charge the phone to SBF properly. I wound up stripping an old USB cable I had and made a "suicide cord" that I electrical taped to the battery for a few hours. (Red, +; black, -) Worked fine afterwards.
Sent from my MB870 using xda app-developers app
Moral of the story...charge your phone before you SBF.
And post questions in the Q&A thread.
Thread moved to proper section.
jsgraphicart said:
Moral of the story...charge your phone before you SBF.
Click to expand...
Click to collapse
buy a Team BlackHat cable
or
Spare Battery Charger for Motorola Droid X/X2
Yup charge your battery this happened to me as well,even though it was at 50 percent when I tried still wasn't enough to finish.
Sent from my MB870 using xda premium
I think I have screwed up badly....
I was using MattyP's 215 leak to go back to 211... while it was downloading/flashing system it somehow hung up. Now it will only boot to the AP Fastboot mode and the battery is low - low enough that the moto flash command(s) will not work (says battery is too low).
I've tried a bunch of suggestions found here to try to get the battery charged, and none of them work. I know that if I could just get a 50-70% battery charge I could redo the flash and get the phone to boot.
So, any ideas now on what to do? The only other thing I can think of trying is the suggestion from another post to cut open an old USB cord and connect the black and red wires to the battery posts to get the phone to 'think' it is connected to a full battery. I'm just afraid I will fry the phone....
Any suggestions? Unfortunately I am out of warranty (just this month, naturally - Murphy's law!)
-Tom
SimpTheChimp said:
I think I have screwed up badly....
I was using MattyP's 215 leak to go back to 211... while it was downloading/flashing system it somehow hung up. Now it will only boot to the AP Fastboot mode and the battery is low - low enough that the moto flash command(s) will not work (says battery is too low).
I've tried a bunch of suggestions found here to try to get the battery charged, and none of them work. I know that if I could just get a 50-70% battery charge I could redo the flash and get the phone to boot.
So, any ideas now on what to do? The only other thing I can think of trying is the suggestion from another post to cut open an old USB cord and connect the black and red wires to the battery posts to get the phone to 'think' it is connected to a full battery. I'm just afraid I will fry the phone....
Any suggestions? Unfortunately I am out of warranty (just this month, naturally - Murphy's law!)
-Tom
Click to expand...
Click to collapse
There is a factory cable that let you power-up your device without battery so you can flash it.
http://forum.xda-developers.com/showthread.php?t=2055839
quote:
- The Razr must be charge to the minimum required the bootloader to enable the flashing process. There are other ways to charge your phone without the stock charger. You can search here on XDA for it.
PS: The factory service cable, allows you to bypass the battery check, by allowing the Razr to receive 5v straight from the usb port. As per CellZealot explanation on third post.
So I wanted CM 10 on my phone and did all the reading as was following a guide. I got as far as installing CM 10 and on the initial start-up it says it can take up to five minutes.. Well, it sits there forever and goes there every time I reboot.
Now, when I hold the volume and power buttons it goes into Android system recovery <3e> I know I had to boot into bootstrap recovery to be able to load the file off my external drive - otherwise you get the failed signature and it won't load.
Can I do anything here to fix my phone? I don't don't care what I loose, I need this working.
Thanks-
Kyle
Ok - so I'm trying to fastboot VRZ_XT912_6.5.1-73_DHD-11_TA-3_1FF_02 onto my phone bia FlashME as RSD Lite will no longer work and its telling me battery low.
I've had this plugged into a Motorola branded wall charger for nearly 4 hours and it still says battery low. Im switching to the dual usb black square charger and a Motorola branded usb cable and trying again - after this I'm not sure how I'm going to be able to charge it...
holding volume and power and going to bp tools to get the battery meter to show does nothing, sits at moto screen forever... I dont want to claim this on my insurance - but I may have to. Help?
KyleQ said:
Ok - so I'm trying to fastboot VRZ_XT912_6.5.1-73_DHD-11_TA-3_1FF_02 onto my phone bia FlashME as RSD Lite will no longer work and its telling me battery low.
I've had this plugged into a Motorola branded wall charger for nearly 4 hours and it still says battery low. Im switching to the dual usb black square charger and a Motorola branded usb cable and trying again - after this I'm not sure how I'm going to be able to charge it...
holding volume and power and going to bp tools to get the battery meter to show does nothing, sits at moto screen forever... I dont want to claim this on my insurance - but I may have to. Help?
Click to expand...
Click to collapse
To charge the phone, you will now need the Motorola factory Charging Cable that bridges pin 4 with pin 1...anyways this will allow the phone to charge now that it is stuck in bootloop. The bridging of the pins allows the phone to think it is in the factory programming mode, allowing it to charge.
I would include a link to the post, but I am a new member...can't post links...but Google the below search term, and there is a few sites on how to make the cable, or where to buy it.
Now, I believe this will solve your charging issue. I don't know about flashing back to stock or making the ROM work, and I would look around a little more on the subject of this cable because I just stumbled across a thread about this a few days ago. A quick Google/XDA search on "Motorola Factory Charge Cable Razr" Should be sufficient.
---EDIT---
After looking through the forums again, I found a thread that may help you...it is in the middle of this forum, and it is called Low Battery charge in Ap Fastboot Fix. Take a look at that and it may help you.
Its toast - wont charge. took it all apart, hacked a cable and put the leads on the battery and gave up. put it back together - calling asurian to get a replacement. **** this thing