Hey guys, I'm new to the SAMSUNG Galaxy scene so take it easy on me.
I just purchased a used Vibrant today and the phone was already rooted without me even knowing it (not that i have a problem with it).
The previous owner didn't do a factory reset so i proceeded to do a hard reset when i noticed there was Clockwork Recovery Mod already installed. After clearing the cache and user data i wanted to confirm if the device was already rooted, so i typed "su" under Terminal and i was granted super user privileges.
Now this is what i dont understand. After doing a hard reset i logged into my recovery but noticed that the original Android recovery was restored and i still had root.
I'm trying to install a new ROM through Clockwork but the market doesn't have the free version so i had to use my PC to send the free version to my Vibrant. Afterwards, when attempting to open Clockwork Recovery Mod (to flash the recovery) the application force closed on me!
I know i can just revert everything back to stock and lose root again but that would be a huge inconvenience for me, and if possible I'd like to figure out what i can do from here. I'm not even positive if the previous owner used the correct method to gain root access or if he/ she skipped a step.
I'd appreciate any help i can get. Thanks in advanced.
Sent from my HTC Glacier using Tapatalk
The market doesn't have the free version of ROM Manager? It's there for me.
Honestly, though, if I'd just bought a used vibrant, I'd ODIN back to JFD, and start over. Maybe flash Bionix or Trigger or Project V or Bi-Winning.
+1 for Project V, most stable ROM I've used on the Vibrant by far.
Clockwork recovery wont be able to install if your vibrant is running froyo 2.2. Also you should try uninstalling and reinstalling ROM Manger if it keeps closing on you but it would be better if you got it directly from the android market.
N_B said:
The market doesn't have the free version of ROM Manager? It's there for me.
Honestly, though, if I'd just bought a used vibrant, I'd ODIN back to JFD, and start over. Maybe flash Bionix or Trigger or Project V or Bi-Winning.
Click to expand...
Click to collapse
My phone is still running on stock firmware Android 2.1. But yeah, I found it very weird to not find the free version of ROM Manager in the market.
So does the unrooting/ rooting method apply to every Galaxy S variant or is it for the international version only?
southkid23 said:
Clockwork recovery wont be able to install if your vibrant is running froyo 2.2. Also you should try uninstalling and reinstalling ROM Manger if it keeps closing on you but it would be better if you got it directly from the android market.
Click to expand...
Click to collapse
I've already tried that method without any luck so I think I'm going to just start all over again to get a better understanding of how SAMSUNG devices work. Thanks anyways guys.
I'm not sure I understand your question about the "international" version - which is the i9000...but...
I also thought of something else - when you go into recovery, and it's the stock one, did you click reinstall packages...maybe twice?
N_B said:
I'm not sure I understand your question about the "international" version - which is the i9000...but...
I also thought of something else - when you go into recovery, and it's the stock one, did you click reinstall packages...maybe twice?
Click to expand...
Click to collapse
Nvm, after I checked out the link you sent me, I found the rooting/ unrooting process was for Vibrant's only.
Yes, I did select 'reinstall packages' because I wanted to restore my phone back to its original condition.
i n f a m o u s said:
Nvm, after I checked out the link you sent me, I found the rooting/ unrooting process was for Vibrant's only.
Yes, I did select 'reinstall packages' because I wanted to restore my phone back to its original condition.
Click to expand...
Click to collapse
if i were you i would follow s15n's noob guide to rooting and other stuff found here... i would odin back to JFD, do a factory reset/wipe cache, re-root, and then flash a custom ROM.
and for a custom ROM, i would highly suggest the Biffmod 1.3.1, it is outstanding and much more powerful than normal roms. also it is gingerbread 2.3.5 rooted.
not sure if this is what you are asking, but if you are having trouble accessing CWM then you can probably access it through the 3-button access (hold down volume up/down button simultaniously and then hold in power button for about 6-7 seconds.) hope this helps
in_dmand said:
if i were you i would follow s15n's noob guide to rooting and other stuff found here... i would odin back to JFD, do a factory reset/wipe cache, re-root, and then flash a custom ROM.
and for a custom ROM, i would highly suggest the Biffmod 1.3.1, it is outstanding and much more powerful than normal roms. also it is gingerbread 2.3.5 rooted.
not sure if this is what you are asking, but if you are having trouble accessing CWM then you can probably access it through the 3-button access (hold down volume up/down button simultaniously and then hold in power button for about 6-7 seconds.) hope this helps
Click to expand...
Click to collapse
I finally got the rooting and flashing stock firmware down but now i can't flash Simply Stock Rom.
Sent from my SGH-T959 using Tapatalk
My suggestion? Read, read, read some more, then keep reading. All the information you'll ever need regarding the Vibrant and all the possible problems you can have while trying to root/flash/Odin/mod/theme/revert/convert/buttsechz/etc your phone has been solved and written about in great detail if you simply look for it.
Related
Hi everyone.
I'm pretty new to android, but I'm quite good at following instructions. Basically I've tried doing a nandroid backup with ROM Manager and everytime it reboots to make a backup it goes to a black screen with a phone in the middle of the screen with a red warning sign next to it. I've always tried booting into recovery and I get the same result. I first found this out while trying to follow the instructions for replacing the status and battery icons. Has anyone else had this issue?
I'm using ROM Manager v3.0.0.1 on a stock HTC MySense ROM from TMO running Android v2.2.1.
Thanks in advance for anyone that knows what I'm apparently doing wrong.
when you opened ROM Manager did you select "Flash ClockworkMod Recovery"? if not try that, it's the only time mine has what your's is doing. I got a little excited to flash Iced-Glacier when I first got the phone and accidentally skipped that step and had same issue
Yeah I first clicked on Flash ClockworkMod Recovery and it currently says Current Recovery: ClockworkMod 2.5.1.2. I just redid the flash and tried to boot into recovery mode and I'm still getting that error picture upon reboot.
Is there a setting on the phone somewhere that would cause this?
I am not positive 100% but I think I know what you mean; and I had it once due to very low battery charge. See if it is the problem or not.
infraled said:
Yeah I first clicked on Flash ClockworkMod Recovery and it currently says Current Recovery: ClockworkMod 2.5.1.2. I just redid the flash and tried to boot into recovery mode and I'm still getting that error picture upon reboot.
Is there a setting on the phone somewhere that would cause this?
Click to expand...
Click to collapse
The phone with the triangle is the stock recovery image. Others have had to try flash the ClockworkMod Recovery several times. You may need to as well.
this is what i did, not sure if your doing the same thing or not. i clicked on Flash ClockworkMod Recovery, MY4G came up and i clicked that and then clicked on backup current rom.
Alright so I've tried it with a full battery and I had the same result. I also tried reflashing several times with the current version and rebooting. I even tried to load some of the older versions of clockwork through ROM Manager and everytime I tried it spits out an error. I don't understand how I could be having such a hard time with something everyone seems to be able to do effortlessly.
Sent from my HTC Glacier using XDA App
R u sure u r rooted with S-off? If u r then u may have to flash recovery from ADB. Some people have not been able to get recovery to stick through ROM manager. There is a thread in the development section that explains how to do this.
Sent from my HTC Glacier using XDA App
Really? I have not heard that...I'll have to check up on that. It seems that this problem would be more common, but I guess not as I have had little luck in finding information on my own about this problem.
Just in case anyone is following this thread with the same problem as me, this is the post that the previous poster was referring to:
http://forum.xda-developers.com/showthread.php?t=852905&highlight=recovery
UPDATE:
Ok I figured out what was wrong. Apparently although I had root access on my phone and able to run things like Titanium Pro and Adfree and others with root privileges it wasn't good enough.
I followed the instructions here on how to permaroot your phone by pushing gfree to it. Once I did that I attempted to manually flash clockworkmod, which I ended up running into other issues. On a lark I tried installing clockworkmod through ROM Manager after permarooting and it finally installed it properly!
I love doing stuff like this, thanks to everyone for their input as it guided me to finally solving this. I'm off to do a nandroid backup now.
krypto16 said:
R u sure u r rooted with S-off? If u r then u may have to flash recovery from ADB. Some people have not been able to get recovery to stick through ROM manager. There is a thread in the development section that explains how to do this.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I have NEVER been able to flash Recovery with ROM manager. It says it does it but corrupts if everytime! Note: There has been some recent updates to ROM Manager and I haven't tried lately.
krypto16 said:
R u sure u r rooted with S-off? If u r then u may have to flash recovery from ADB. Some people have not been able to get recovery to stick through ROM manager. There is a thread in the development section that explains how to do this.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
IIRC the security protocol doesn't have to be off to flash clockwork ROM you do have to be rooted, VISONary.apk of course. I've turned my S=on just to make sure and it [clockworkROM] works pretty flawlessly.
Hey hey, it's great to see infraled out here! I am rooted/S=Off via the first VISIONary thread that was posted...
http://forum.xda-developers.com/showthread.php?t=834225
I installed Clockwork, flashed Clockwork Recovery and was expecting to have to do it twice, as outlined in this thread...
http://forum.xda-developers.com/showthread.php?t=858021
It only took one shot for me and it worked perfectly. The very first try, I powered off, powered on w/ vol down, went into Recovery and wham, there was Clockwork in its green glory. I figured I was just lucky and that once I rebooted, it would be lost and I'd have to flash again. Not so. Did a backup right away, worked flawlessly.
Looking forward to Iced Glacier, eVil and Cyanogen over the holiday break...
shlongwoodian said:
Looking forward to Iced Glacier, eVil and Cyanogen over the holiday break...
Click to expand...
Click to collapse
Cyanogen Gets my vote... But i've always loved T/DB's ROMS.
Recently rooted My new MyTouch 4G, downloaded the paid version of rom manager. I didn't understand why there are none of the current roms like the iced glacier, roms made by evil and several others listed as possible roms for flashing. The only roms are the cyanogenmod nightly builds. The cyanogenmod 6.1.2 RC2 isn't listed either. Do I need to do anything to get those listed or is that just the way it is???
Thank you,
Vinny
Just like the title says why should we not use rom-manager on this phone?
from what i can remember it installs a ****ty version of CWM that doesn't cooperate well with our phones.
Boobie Watcher said:
from what i can remember it installs a ****ty version of CWM that doesn't cooperate well with our phones.
Click to expand...
Click to collapse
gotcha. i wish koush would do something about rom manager because the atrix also had a wipping issues on roms and he never fixed it
From my recent experience with the SGSII, the recovery is integrated into the kernel (unlike HTC devices which have a dedicated partition for it). My guess is ROM Manager can't flash it, since it doesn't have the kernel image.
Phoenix84118 said:
From my recent experience with the SGSII, the recovery is integrated into the kernel (unlike HTC devices which have a dedicated partition for it). My guess is ROM Manager can't flash it, since it doesn't have the kernel image.
Click to expand...
Click to collapse
gotcha thats intresting
You shouldn't use it on any phone anyway, your best bet is going into recovery
Sent from my Inspire 4G using XDA App
Haha too funny I was literally wondering this last night. Glad you asked kuz I couldn't find an answer when I did a quick search.
Edit: so I've been running miui this week and see the app rom manager. I'm fine as long as i don't actually do anything through it correct?
Sent from my SGH-I777 using Tapatalk
It breaks and does weird crap - I've heard it works OK if (and only if) you are currently on CM7.
But since you're most likely using it to move to/from another ROM... Just three-finger into recovery or if the ROM has an extended power menu use that for recovery.
Its best to just use three-finger or the extend menu power menu like Entropy said. I've seen Rom manager mess up leading to a semi-brick phone.
Hey all,
First time poster and new to rooting.
I ended up attempting to use rom manager to load CWM right after root, but I think that borked my wifi.
What can I do if I've already used it? I did it because I hadn't yet seen all the xda threads on NOT using it, and the place I was was not as well informed as you folks.
Also, how do I get CWM if not via ROM Manager?
My brothers EVO was royally effed up from using ROM Manager. Became a paperweight until Sprint authorized a replacement.
karankshah said:
Hey all,
First time poster and new to rooting.
I ended up attempting to use rom manager to load CWM right after root, but I think that borked my wifi.
What can I do if I've already used it? I did it because I hadn't yet seen all the xda threads on NOT using it, and the place I was was not as well informed as you folks.
Also, how do I get CWM if not via ROM Manager?
Click to expand...
Click to collapse
Read through the FAQs and this thread - CWM is included in kernels that support it.
karankshah said:
Hey all,
First time poster and new to rooting.
I ended up attempting to use rom manager to load CWM right after root, but I think that borked my wifi.
What can I do if I've already used it? I did it because I hadn't yet seen all the xda threads on NOT using it, and the place I was was not as well informed as you folks.
Also, how do I get CWM if not via ROM Manager?
Click to expand...
Click to collapse
I ended up figuring most of this out so I wanted to close this out (for anyone that stumbles past my original post).
Here's what I did:
I uninstalled ROM Manager - but this didn't get the wifi going.
I reflashed with the stock ROM and unrooted kernel - this still didn't help.
I did a factory reset - this did manage to get it going.
I was able to track down a CWM standalone that I flashed it with (using Odin).
I followed that up with a root, a wipe, and then a fresh flash of UnNamed.
Phone seems to be working fine.
Andrew149 said:
Just like the title says why should we not use rom-manager on this phone?
Click to expand...
Click to collapse
When I first rooted my phone I installed rom manager because it looked easier to just pick the file that u wanted flashed and it would do it for u, so u wouldn't have to play with the volume keys. But every time I tried to do anything with it, it just said certificate not found. Aborting. So u shouldn't use rom manager. I think it works with the roms that u download of the app but not ones from XDA.
Sent from my SGH-I777 using XDA App
I loaded a kernal with cwm. I use rom manager to install Google apps. After new rom loads up.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Flash entropys kernel. Daily driver
Sent from my Samsung Galaxy S II
If you're on CM7, ROM Manager can be used to install gapps - that's about the only thing it doesn't seem to choke on.
karankshah said:
Hey all,
First time poster and new to rooting.
I ended up attempting to use rom manager to load CWM right after root, but I think that borked my wifi.
What can I do if I've already used it? I did it because I hadn't yet seen all the xda threads on NOT using it, and the place I was was not as well informed as you folks.
Also, how do I get CWM if not via ROM Manager?
Click to expand...
Click to collapse
You cannot get CWM via ROM Manager - that is the point. It comes with certain custom kernels such as Entropy's DD kernel. If you do not have a CWM kernel - you will more than likly need to use Odin to get a kernel with CWM.
If you have totally screwed things up - look in the dev thread for "the return to stock" section and start over doing it the right way
karankshah said:
I ended up figuring most of this out so I wanted to close this out (for anyone that stumbles past my original post).
Here's what I did:
I uninstalled ROM Manager - but this didn't get the wifi going.
I reflashed with the stock ROM and unrooted kernel - this still didn't help.
I did a factory reset - this did manage to get it going.
I was able to track down a CWM standalone that I flashed it with (using Odin).
I followed that up with a root, a wipe, and then a fresh flash of UnNamed.
Phone seems to be working fine.
Click to expand...
Click to collapse
Hi first post as well XDA forums so in depth and helpful decided I wanted to be apart of it. Still a noob though ill work my way up.
I am trying acheive the same goal he is, that is to say Instal the UnNamed (it is exactly what I want) Rom on my Samsung Galaxy S2 Skyrocket.
Keep it brief: Rooted my phone using root exploit:
it will not let me post link. the zergrush one
and bellow flashed clockwork mode using stand alone not ROM because of this forum. Model 5.0.2.6
I wipe catch, battery, then format everything. Then I start to flash the ROM. The installation begins. It cleans and formats everything again, then sais that there was an error in the file and it fails. After this if I dont restore my phone will not start. Ive tried it several times being even more thorough on procedure and its the exact same error every time.
Im just wondering if its the way I rooted it is incorrect, The CWM Im using is not the correct one, or if Im doing something wrong entirely. I think it might be CWM but I have not been able to locate one like he did that worked.
Any help, suggestions, criticism or advice would be very helpful. I just thought Id ask. thanks in advance ^^
Elemblue said:
Hi first post as well XDA forums so in depth and helpful decided I wanted to be apart of it. Still a noob though ill work my way up.
I am trying acheive the same goal he is, that is to say Instal the UnNamed (it is exactly what I want) Rom on my Samsung Galaxy S2 Skyrocket.
Keep it brief: Rooted my phone using root exploit:
it will not let me post link. the zergrush one
and bellow flashed clockwork mode using stand alone not ROM because of this forum. Model 5.0.2.6
I wipe catch, battery, then format everything. Then I start to flash the ROM. The installation begins. It cleans and formats everything again, then sais that there was an error in the file and it fails. After this if I dont restore my phone will not start. Ive tried it several times being even more thorough on procedure and its the exact same error every time.
Im just wondering if its the way I rooted it is incorrect, The CWM Im using is not the correct one, or if Im doing something wrong entirely. I think it might be CWM but I have not been able to locate one like he did that worked.
Any help, suggestions, criticism or advice would be very helpful. I just thought Id ask. thanks in advance ^^
Click to expand...
Click to collapse
UnNamed is not a Skyrocket ROM nor are any other ROMs in this subforum. You want to go here: http://forum.xda-developers.com/forumdisplay.php?f=1399
What is the use of flashing clockworkmode??
cant we just root the device=>flash cm7???
and after I flash cm7 can I do a recovery??
You can't flash CM7 without a recovery
Sent from my LG-P509 using xda premium
I think you don't understand what a "Custom recovery" actually means...
And by the way, LGDRM, KDZ Updater and fastboot can update firmware without an installed recovery
sweetnsour said:
You can't flash CM7 without a recovery
Sent from my LG-P509 using xda premium
Click to expand...
Click to collapse
is recovery a tool to flash cm7?
Ianis G. Vasilev said:
I think you don't understand what a "Custom recovery" actually means...
And by the way, LGDRM, KDZ Updater and fastboot can update firmware without an installed recovery
Click to expand...
Click to collapse
what are those?? never heard of them
thomaslau said:
what are those?? never heard of them
Click to expand...
Click to collapse
How can you expect to flash cm7 on your phone if you don't know what to use and what you are doing?
http://forum.xda-developers.com/showthread.php?t=900905
http://forum.xda-developers.com/showthread.php?t=1152306
thomaslau said:
What is the use of flashing clockworkmode??
cant we just root the device=>flash cm7???
and after I flash cm7 can I do a recovery??
Click to expand...
Click to collapse
You cannot flash custom roms without a recovery, LGDMP and KDZ updater flash stock roms only!!
sweetnsour said:
How can you expect to flash cm7 on your phone if you don't know what to use and what you are doing?
http://forum.xda-developers.com/showthread.php?t=900905
http://forum.xda-developers.com/showthread.php?t=1152306
Click to expand...
Click to collapse
i flash cm7 already by following the thread but dont understand some procedures
thomaslau said:
i flash cm7 already by following the thread but dont understand some procedures
Click to expand...
Click to collapse
What are these procedures you are talking about? And are you saying that you were confused yet you still managed to flash cm7?
You should read the stuff in the links I posted. It doesn't get any simpler than that. If you are still confused after reading those links, I suggest you stop what you are doing and continue on with your life
sweetnsour said:
What are these procedures you are talking about? And are you saying that you were confused yet you still managed to flash cm7?
You should read the stuff in the links I posted. It doesn't get any simpler than that. If you are still confused after reading those links, I suggest you stop what you are doing and continue on with your life
Click to expand...
Click to collapse
i already flashed cm7 on my phone and using it. but i dont get it why do wee need to use clockworkmod or any other similar to the mod
thomaslau said:
i already flashed cm7 on my phone and using it. but i dont get it why do wee need to use clockworkmod or any other similar to the mod
Click to expand...
Click to collapse
You need a custom recovery to flash roms such as cm7. It is also used to make a backup of your phone and wipe the data on your phone. How is it that you've flash cm7 (which means that you've also used your recovery before) yet you don't know the purpose of having a recovery? I think you're going way to ahead of yourself.
Sent from my LG-P509 using xda premium
I'm guessing it's more of a case of he's flashed cm7, using the recovery to do so, but doesn't understand the behind-the-scenes procedures that go into the actual flashing.
you need to read the sticky thread if you dont know basics
Think of custom recovery as the basic setup/installer tool for anything and everything related to custom ROMs, kernels, etc. .
kdz and lgdrm are only for stock(OEM)/official releases.
The reason you need it, because it's the only way to do it and carrier's don't give you access to change your ROM. Does Microsoft put mod chips/software in xbox 360? No, hell no, they only give you limited access and regulate what content can be yours.
Custom recoveries come with features that you normally can't do, like nand(full phone backup) backup.
It's this way because that's how it has to be done.
Sent from my LG-P500 using Tapatalk
thanks, you guys are awesome.
just one more question: can i reset my phone and restore it to stock cm7. if yes, how can i do it??? is that like i only need to hold power & vol. down at the same time and go to recovery mode? thx
thomaslau said:
i already flashed cm7 on my phone and using it. but i dont get it why do wee need to use clockworkmod or any other similar to the mod
Click to expand...
Click to collapse
Just because your phone is "rooted" dosent mean you can install a rom like a app, you need to use clockwork mod, why do you need it? you need it because it allows you to perform actions that you couldn't do on a stock phone. With clockwork mod you can back up your system files, restore system files, install new roms for use or testing. If your phone is just "rooted" all it means is you can now access system files, use certain "root required" apps, being rooted is step #1 to installing clockwork mod, its like your phone is unlocked, if you just want your phone rooted to delete some system apps thats fine, but it is wise to flash clockwork mod because it can prevent your phone from being bricked and now you can install roms. so the answer is pretty simple, how else would you install a rom without clockwordmod? you couldnt so its just one of those things you need, hope this helps man
reply
apart from all this custom roms come packed as zip files n kdz updater or lgdrm doesnt recognize these files so u need to hace custom recoveries like cmw or twrp or amonra
thomaslau said:
thanks, you guys are awesome.
just one more question: can i reset my phone and restore it to stock cm7. if yes, how can i do it??? is that like i only need to hold power & vol. down at the same time and go to recovery mode? thx
Click to expand...
Click to collapse
I don't think that you could do that... since the phone doesn't even come with CM7 in the first place. Doing a factory reset / restore wouldnt bring the phone to stock CM7. Correct me if I'm wrong but wouldn't it bring the phone back to FroYo since that's what it came with?
CM7 is already a custom ROM so there is nothing stock about it... Stock means whatever the phone came with from the box (FroYo) CM7 is Gingerbread.
raylgo said:
I don't think that you could do that... since the phone doesn't even come with CM7 in the first place. Doing a factory reset / restore wouldnt bring the phone to stock CM7. Correct me if I'm wrong but wouldn't it bring the phone back to FroYo since that's what it came with?
CM7 is already a custom ROM so there is nothing stock about it... Stock means whatever the phone came with from the box (FroYo) CM7 is Gingerbread.
Click to expand...
Click to collapse
If your running cm7 or any rom you can do a factory/reset through the rom your using, it will just erase all info but wont delete the rom and it will delete apps so when you reboot you will have to set up Google account like a new phone, cm7 will still be installed and your current rom it will just be like new, to do a factory reset go to settings, security then hit factory reset, reboot and then back to a clean start on cm7 there will be a option to erase everything on the SD card, hit no if you want to keep all files on your SD or hit yes if you want it all gone, goodluck p.s the only way you can go back to stock is to flash a stock rom and if you made a backup of your stock rom before you flashed cm7
Sent from my NookColor using xda premium
Hey,
I have installed rom manager to flash clockwork recovery.. one thing i want to ask that after flashing clockwork recovery n in case if i want to remove it, then how ..? I have just rooted stock rom v20c n i want to install kernel for playing games... help me n guide how do i do n how can i remove clockwork recovery , i m feeling very freaky bcoz once before i have already bricked my phone by flashing gb through kdz... help.. n i think that this time the people at service centre will refused to repair it bcoz they can guess what i m doing again n again with it...
thanks in advance
Sent from my [email protected] OpTiMu$ On€ [email protected]
Hi,
I am rooted on my S3 and all is good. However, my Father also has an S3 and last week he was talked into rooting it by his Grandson. All went well but long story short he was not happy with having a rooted phone so has decided to remove root. He has now done so by following various guides. He used Triangle away which he says went successfully and has used Odin to put the latest stock firmware on the phone which again he says went successfully. I was not there when he did all this but phone seems all good.
Except one thing. He has tried to install a couple of apps he had before rooting. Barclays bank app and Sky Go app. After installation these apps are saying they will not work on a rooted phone, but it's not rooted any more. I have booted into recovery using Volume down, power and home buttons and it says custom firmware / rom, I can't remember exact wording, but it says no. Also in the phone menu where a rooted phone says modified in device status it says normal or whatever it should say. Again can't remember exactly but all looks like no root present.
Anyone got any ideas on this? As I am rooted on my S3 and never un-rooted it yet, I do not know if he should have done something else. Will he have to root again to run triangle away or anything else. Or can this be fixed as the phone is at present?
Thanks for any help guys.
Cheers, Rich
Three6ty said:
Hi,
I am rooted on my S3 and all is good. However, my Father also has an S3 and last week he was talked into rooting it by his Grandson. All went well but long story short he was not happy with having a rooted phone so has decided to remove root. He has now done so by following various guides. He used Triangle away which he says went successfully and has used Odin to put the latest stock firmware on the phone which again he says went successfully. I was not there when he did all this but phone seems all good.
Except one thing. He has tried to install a couple of apps he had before rooting. Barclays bank app and Sky Go app. After installation these apps are saying they will not work on a rooted phone, but it's not rooted any more. I have booted into recovery using Volume down, power and home buttons and it says custom firmware / rom, I can't remember exact wording, but it says no. Also in the phone menu where a rooted phone says modified in device status it says normal or whatever it should say. Again can't remember exactly but all looks like no root present.
Anyone got any ideas on this? As I am rooted on my S3 and never un-rooted it yet, I do not know if he should have done something else. Will he have to root again to run triangle away or anything else. Or can this be fixed as the phone is at present?
Thanks for any help guys.
Cheers, Rich
Click to expand...
Click to collapse
try doing a factory reset
Has it got a custom ROM or stock ROM? could be due to a custom ROM maybe?
Sent from my GT-P7510 jellybeaned up!
slaphead20 said:
try doing a factory reset
Click to expand...
Click to collapse
Hi,
Good idea. Just so I can warn him, I'm guessing this will wipe the phone and he will have to re-run setup etc?
Three6ty said:
Hi,
Good idea. Just so I can warn him, I'm guessing this will wipe the phone and he will have to re-run setup etc?
Click to expand...
Click to collapse
Sorry, just looked on mine and confirmed my question above. It will wipe the lot.
danmorley0702 said:
Has it got a custom ROM or stock ROM? could be due to a custom ROM maybe?
Sent from my GT-P7510 jellybeaned up!
Click to expand...
Click to collapse
It's a stock rom. Downloaded from the official rom thread on here
Three6ty said:
Sorry, just looked on mine and confirmed my question above. It will wipe the lot.
Click to expand...
Click to collapse
yup, it wipes all user data and apps, let us know if it works after doing this
Hi,
My father did the factory reset today and it wiped his phone and he went through the new set up. However he still can't install some apps as they are still saying they do not support rooted devices. I just can't figure it out. Any ideas please guys. Thanks
Cheers, Rich
Three6ty said:
Hi,
My father did the factory reset today and it wiped his phone and he went through the new set up. However he still can't install some apps as they are still saying they do not support rooted devices. I just can't figure it out. Any ideas please guys. Thanks
Cheers, Rich
Click to expand...
Click to collapse
One basic question..are you still able to go into recovery..vol up+power+home..if yes you are still rooted...you need to find your stock firmware and flash it via odin
check if it was a stock firmware your father flashed orcustom ROM o.follow this guide to do it again
http://forum.xda-developers.com/showthread.php?t=1710613
zoot1 said:
One basic question..are you still able to go into recovery..vol up+power+home..if yes you are still rooted...you need to find your stock firmware and flash it via odin
check if it was a stock firmware your father flashed orcustom ROM o.follow this guide to do it again
http://forum.xda-developers.com/showthread.php?t=1710613
Click to expand...
Click to collapse
Hi,
Just tried that and the S3 will not go into recovery via volume up, power and home. Tried several times and it just powers up as normal. He has just tried his banking app and it's telling him the phone is rooted. I'm stumped on what to do.
Cheers, Rich
Sounds like maybe triangle away didnt properly remove the count, was the firmware he downloaded the official one for his phone? Was it previously branded or anything like that?
go supersu and click remove root
Three6ty said:
Hi,
Just tried that and the S3 will not go into recovery via volume up, power and home. Tried several times and it just powers up as normal. He has just tried his banking app and it's telling him the phone is rooted. I'm stumped on what to do.
Cheers, Rich
Click to expand...
Click to collapse
Did you try redoing the steps mentioned in the thread??
Also clear data from that app..just a mention
Sent from my GT-I9300 using xda app-developers app
Hi,
He has superSu on the phone. Presumably it has downloaded from the play store when restoring the phone. However, he tried to uninstall it which just removed the updates. Couldn't go any further. It is now asking for updates which he has done. But when he tries to launch Super SU it says no apps configured and won't go any further. I think the fact that super su is on the phone, the apps are thinking it is rooted. I am doing this all over the phone so can't see what's happening.
I'm wondering if the way to go now would be another factory reset and when restoring everything, try not to let play store instal super su. Would this be the way to go, or can we get super su off the phone without a reset?
Cheers, Rich
Try uninstalling super su with titanium backup. Then factory reset. Are you sure you have flashed a stock ROM and not a rooted one. This doesnt sound right.
Sent from my GT-I9300 using xda premium
Why not try reflashing again with original firmware via odin.
Sent from my GT-I9300 using xda app-developers app
zoot1 said:
One basic question..are you still able to go into recovery..vol up+power+home..if yes you are still rooted...
Click to expand...
Click to collapse
Didn't know there was something like that. Now I am on stock and un-rooted. I can still go into the recovery by pressing vol up+power+home keys.
Hi,
Trying to do these things with him over the phone ain't easy. I may just go and get the phone and do it myself.
He does have supersu on the phone and it is working, well it's installed anyway but obviously does not do the root things as the phone is un-rooted. There is an option in supersu settings to remove root but will this work as the phone is not rooted? Question is how on earth do I remove supersu. Do i need to re-root and remove it that way?
Cheers, Rich
yldlj said:
Try uninstalling super su with titanium backup. Then factory reset. Are you sure you have flashed a stock ROM and not a rooted one. This doesnt sound right.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Can't uninstall via Titanium backup as he is no longer rooted unless he roots the phone again. It is a stock rom. It was downloaded via the official rom thread on here.
http://www.unlimitedtips.com/2012/06/how-to-unroot-samsung-galaxy-s-3.html
This works very well for me
Hello all, I want to install Clockworkmod on my Samsung Vibrant T959 so I can install a custom ICS ROM. I ran into some problems along the way. I can not seem to install CWM correctly. I had the phone under Froyo 2.2, kernel version 2.6.32.9, and build number froyo.uvkb5. After flashing the recovery by ROM Manager, I would still be stuck at the stock recovery. I have the correct files to download:update.zip. After clicking on "reinstall packages", the recovery said "replacing stock recovery with Clockworkmod recovery". The problem is that after that message, the phone restarts into the stock recovery. I tried it 4 times in a row, but I'm still stuck at the stock recovery. The system keeps saying that it will replace the stock recovery with the CWM recovery, but that did not happen with me. I would keep getting the same message when I click on "re install package". What am I missing that does not allow me to do this? Thanks all.
Are you on 2.1 eclair or 2.2 froyo?
I'm pretty sure you need to be on 2.1 but don't quote me.
Also, I believe there is an issue with the newer versions of ROM manager, recovery mismatch. (Again don't quote)
I haven't had to mess with that stuff in a long time. Either way I'm posting a link that will help you along. If you have any more questions just shoot.
http://forum.xda-developers.com/showthread.php?p=9375927
Paranoid, sitting in a deep sweat...
Thanks for the reply. Like I said in my last post, I am running at Froyo 2.2. I already bricked my phone for failing to downgrade to 2.1. I already rooted my phone, my problem is that I could not install CWM correctly by the stock rom. After the message states that it is replacing the stock rom, my phone goes back to stock with no changes.
woodrube has some great guides, I use the update.zip method, rom manager didnt like my phone, post if you still have problems and Ill give you more accurate directions on guides.This is probably heresy, but i never could get rom manager, even pro to do what I wanted,and Im sure it was me.
Your positive you dont have a 4g?
Sugartibbs said:
woodrube has some great guides, I use the update.zip method, rom manager didnt like my phone, post if you still have problems and Ill give you more accurate directions on guides.This is probably heresy, but i never could get rom manager, even pro to do what I wanted,and Im sure it was me.
Click to expand...
Click to collapse
You do not understand, I am having the problem that CWM could not install properly. When I chose "install packages" the steps went by and ended with "Replacing stock recovery with CWM recovery". Usually, that would jump straight into CWM recovery after it's installed. That did not happen to me, After installation, my phone restarted and booted back into stock recovery. I tried installing again but I always go back to stock recovery and not Clockworkmod recovery as I planned.
Ive never seen that error message, I know its frustrating, but the t959v 4g comes loaded with Froyo 2.2,the a 2.1 eclair odin will brick it.Just trying to help.
Go back to 2.1, uninstall ROM manager, use the update zip in the guide link I posted.
Paranoid, sitting in a deep sweat...
---------- Post added at 11:06 PM ---------- Previous post was at 10:44 PM ----------
In the link I sent is the AIO toolbox download. There is a guide how to use it in this link. The DL links are dead in this one so get from previous.
Paranoid, sitting in a deep sweat...
IIRC the update.zip method does not work in Stock 2.2 because of the 2e and 3e recovery mismatch. If you to go to 2.1 Eclair, then you can use the update.zip method and then flash your ROM of choice after that. If you decide to stay on 2.2, you'll have to get the 3e method. It is in the Development section, so you'll just have to search 3e and it should come right up.
All this is provided you have a T959 (3g) and not a T959v (4g). Sorry but lately there have been many 4g users flashing our ROMs and then freaking out.
You can also find a bunch of files in my Repo thread stickied in the Dev section.
samsgun357 said:
Go back to 2.1, uninstall ROM manager, use the update zip in the guide link I posted.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Maybe you'll get it now.
Good luck.
@Woody, thanks buddy.
I linked your repo thread in my previous post.
Edit: well the link isn't in my posts, must not have sent??? But here it is
http://forum.xda-developers.com/showthread.php?p=31279153
Paranoid, sitting in a deep sweat...
Click to expand...
Click to collapse
The first thing you need to do after obtaining root is flash a kernel. You can't install a rom from re-install packages. That has to be done in a custom recovery, which is built into the kernel. Easiest way to do that is download a kernel and flash it with sgs kernel flasher. I would suggest immortality kernel. After that you can go into the custom recovery and flash your rom of choice.
nfkod said:
The first thing you need to do after obtaining root is flash a kernel. You can't install a rom from re-install packages. That has to be done in a custom recovery, which is built into the kernel. Easiest way to do that is download a kernel and flash it with sgs kernel flasher. I would suggest immortality kernel. After that you can go into the custom recovery and flash your rom of choice.
Click to expand...
Click to collapse
^^ this is not true.
I had a issues with my apps doing the same thing. I had to get busy box and install a older ver 19.2. It corrected the issue. Updating superuser caused my headache
Sent from my SGH-T959 using xda premium
naturallight said:
I had a issues with my apps doing the same thing. I had to get busy box and install a older ver 19.2. It corrected the issue. Updating superuser caused my headache
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
I have no idea what you are talking about?????
Paranoid, sitting in a deep sweat...
If you have the proper xda version of update zip on your sd...,, theres no need for a kernel flash.
I have the same exact issue as the original poster. 2.2 froyo and all. I even replaced my stock 3e recovery with the modded one, but I get the same issue. Says its flashing CW recovery but it always reboots and comes back with the stock recovery. What exactly are we doing wrong?
Follow steps in this guide, update.zip b is probably best but you need to Odin back to stock first.
http://forum.xda-developers.com/showthread.php?p=9375927
Alright so I managed to get CWM on my 2.2 Stock Vibrant and even got it permanently. What I did was download SGS Kernel Flasher and install it. Then I went the Samsung Vibrant Kernel Bible and found the stock kernel with Voodoo lagfix included that matched my phone (because the kernel has CWM built in) downloaded it, and placed it on the root of my card. Launched the app, backed up my current kernel and then flashed the new one. Everything went smooth and then my phone rebooted and was stuck on the Vibrant screen for 20 minutes. I was pretty sure I messed my phone up. Also it was talking to me which I didn't realize at first, because I was expecting my phone to be talking to me! Finally made out what it said and it said something along the lines of not enough space on the partition, closing... It was hard to understand because it was in a robotic voice. It eventually rebooted and loaded up like normal. Checked the about phone but saw nothing different. So I decided to reboot to recovery just to check and sure enough, CWM 2.5.1.3 comes up, and comes up every time Finally, now to figure out what to do to get on a jellybean ROM
When I say Odin to stock that's 2.1 eclair. Voodoo lagfix will cause issues going to a JB ROM.
You don't need to try and re-invent the wheel.
Odin to stock 2.1 eclair JFD.
Put ROM on sdcard
Go to recovery, install update.zip from guide I linked.
Wipe and flash ROM.
It can't get much easier. I am not trying to come off as a ****, only to help you, and avoid future issues.
BTW, I saw your pm, I can't reply because it keeps crashing the app. If you go in and disable voodoo lagfix you should be able to flash PA without issue. It will take 3 flashes. You only need to wipe before the first flash. Wipe cache, dalvik cache, factory/data and format system in mounts and storage. If you get in a boot loop, pull battery then use button combo back to recovery. GB boots are not required.
samsgun357 said:
When I say Odin to stock that's 2.1 eclair. Voodoo lagfix will cause issues going to a JB ROM.
You don't need to try and re-invent the wheel.
Odin to stock 2.1 eclair JFD.
Put ROM on sdcard
Go to recovery, install update.zip from guide I linked.
Wipe and flash ROM.
It can't get much easier. I am not trying to come off as a ****, only to help you, and avoid future issues.
BTW, I saw your pm, I can't reply because it keeps crashing the app. If you go in and disable voodoo lagfix you should be able to flash PA without issue. It will take 3 flashes. You only need to wipe before the first flash. Wipe cache, dalvik cache, factory/data and format system in mounts and storage. If you get in a boot loop, pull battery then use button combo back to recovery. GB boots are not required.
Click to expand...
Click to collapse
QFT. Just yesterday I ran into the same problem as reported by the OP and a few others. I HAD to downgrade to 2.1 via JFD Odin. Then flash the update.zip. I then just downloaded ROM Manager to get CWM working. However, I did see in some instructions that sometimes even though you know you have CWM installed, it will still default to stock recover. I simply applied the update.zip again and it eventually fixed itself. Not sure what that was about, but I did see it in some instructions, and I experienced it as well.
nfkod said:
the first thing you need to do after obtaining root is flash a kernel. You can't install a rom from re-install packages. That has to be done in a custom recovery, which is built into the kernel. Easiest way to do that is download a kernel and flash it with sgs kernel flasher. I would suggest immortality kernel. After that you can go into the custom recovery and flash your rom of choice.
Click to expand...
Click to collapse
great help dude.i fixed finaly."""""thanks"""""