[Q] PLEASE HELP:(LG Phoenix stuck in fastboot - Android Q&A, Help & Troubleshooting

LG Phoenix rooted 2.2.2 installed cwm, flashed cwm, in app stated it flashed showed version and date. didnt restart phone or try recovery. didnt back out of cwm app, click on backup rom, cwm went to restart phone got stuck in
fastboot started
usd()
pulled batt same thing happend
put it in emergency mode wont let me do anything in there
have adb, and lg mobile update software update [KDZ] tried running kdz file multiple times. both say thay cant connect to device. my comp does reconize it i see lg modem in device manager.
please i am at my wits end. i would love some suggestions and advice.

Related

[Q] phone P500 not getting past lg logo (white)

Hi people
Today i wanted to go to clockworkmod recovery (through rom manager) to flash the latest kernel of franco (19.4) , but it didn't went to the recovery mode , instead it stuck on lg logo.
I tried the following steps :
1) getting out the battery + sim + sd card.
2) pressing home+vol down+power - didn't get to the clockworkmod
3) connecting the phone to pc , trying to use adb => getting the device not
found error.
None of these steps worked.
The only thing that "worked" was getting to emergency mode by pressing back+vol up+power. If i connect the phone to the pc , in emergency mode, it is still not being recognized.
Please help !!
thanks a lot
eranle said:
Hi people
Today i wanted to go to clockworkmod recovery (through rom manager) to flash the latest kernel of franco (19.4) , but it didn't went to the recovery mode , instead it stuck on lg logo.
I tried the following steps :
1) getting out the battery + sim + sd card.
2) pressing home+vol down+power - didn't get to the clockworkmod
3) connecting the phone to pc , trying to use adb => getting the device not
found error.
None of these steps worked.
The only thing that "worked" was getting to emergency mode by pressing back+vol up+power. If i connect the phone to the pc , in emergency mode, it is still not being recognized.
Please help !!
thanks a lot
Click to expand...
Click to collapse
Your phone is bricked. Flash KDZ to get back to your original firmware.
Anyway, don't use Rom manager. Safe and easy way to install amon_ra recovery http://forum.xda-developers.com/showpost.php?p=13347868&postcount=249
ok thank you
I'm downloading now the original firmware of the phone (it's actually P509 T-mobile)
Still the phone isn't recognized by the pc in emergency mode (i disabled the lg modem in device manager) , is that supposed to be like that ? will the kdz updater work?
thanks
eranle said:
ok thank you
I'm downloading now the original firmware of the phone (it's actually P509 T-mobile)
Still the phone isn't recognized by the pc in emergency mode (i disabled the lg modem in device manager) , is that supposed to be like that ? will the kdz updater work?
thanks
Click to expand...
Click to collapse
Should be.
Uninstall all LG drivers, make sure that is done! Then restart pc and install these drivers again through lg mobile utilities. Restart pc again and plug your phone to pc. Then your pc recognize your phone.
Sent from my LG-P500 using xda premium
well i flashed kdz with original firmware - in the kdz updater it finished
now it gets past the lg logo but stuck at the android logo.
dont know what to do...please help...
EDIT : the phone is ok and back to running !
My phone has Brick, too. I tried all method. But not success. Can you help me, please... (
wlliams said:
My phone has Brick, too. I tried all method. But not success. Can you help me, please... (
Click to expand...
Click to collapse
So describe your problem...
send from Andy's PHOENIX.
Hi,
Sorry, I am new to this.
Today i tried to flash franco's kernel v19.4 using clockworkmod recovery. After flashing the kernel successfully, i rebooted the device.
Now i get forceclose error for com.google.settings every time i reboot the phone. Also sd card is not detected and live wallpaper is also not working.
Kindly help.
Running stock GB 2.3.3 on LGP500
franco.kernel v19.4
you flashed the wrong kernel! !
For stock 2.3.3 u need to use the 2 OCT v1.1 kernel
Sent from my LG-P500 using XDA App
akshay.s said:
Hi,
Sorry, I am new to this.
Today i tried to flash franco's kernel v19.4 using clockworkmod recovery. After flashing the kernel successfully, i rebooted the device.
Now i get forceclose error for com.google.settings every time i reboot the phone. Also sd card is not detected and live wallpaper is also not working.
Kindly help.
Running stock GB 2.3.3 on LGP500
franco.kernel v19.4
Click to expand...
Click to collapse
Like terratrix said, use this:
http://forum.xda-developers.com/showthread.php?t=1148196
Solution to this
eranle said:
ok thank you
I'm downloading now the original firmware of the phone (it's actually P509 T-mobile)
Still the phone isn't recognized by the pc in emergency mode (i disabled the lg modem in device manager) , is that supposed to be like that ? will the kdz updater work?
thanks
Click to expand...
Click to collapse
First it happened to me also. To get rid of this jus t keep shaking your phone from as soon as you connect it to pc to until the software update starts. I know this is wierd but it works only after shaking.
Thanks terratrix,
I flashed 2 OCT v1.1 kernel and my P500 now works like a charm. battery usage is looking good and i OC'd it to 729MHz, but seems my phone is getting hot after few minutes of normal usage.
Thanks.

[Q] Galaxy S2 hangs on boot screen..no recovery mode

I installed the latest nightly build (cm_galaxys2_full-88.zip) on my phone yesterday night and restored the all the apps through Titanium Backup. Everything was working fine until this morning I tried to create a backup using CWM recovery in Rom Manager. The phone shut down and has since been stuck on the initial boot screen (one with the Samasung galaxy S2 logo). It does not boot into recovery mode using the button combinations. I can only get it into download mode but Odin does not recognize it as I thing i forgot to enable USB debugging.
I have tried removing the battery and rebooting and also tried to access it through odin a number of times. But nothing seems to work.
What am I missing here ?
This might help?
mjondj said:
I cannot boot into recovery, but I can boot into download. However, odin is no longer recognizing my GS2 when I plug it into my PC.
The bootloop began when I was attempting to flash the cyanogen7 with the google apps.
I read every post in this thread, and have seen a number of people who cant boot into recovery, but can boot to download. I haven't seen anyone else mention that their phone is no longer recognized by odin on their pc.
Please help.
edit:
Perhaps odin doesn't see my phone because I didn't have USB debugging enabled? if that's the case, what can I do?
------------------------------------------------------------------------------------------------------------------
solved:
heimdall overwrites a driver and stops odin from seeing your phone. i attempted to remove it, unsuccesfully. but loaded odin onto a different computer (that had never seen heimdall).
i booted into download, connected to 2nd pc w/ odin, and ran CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.tar (search forum) in PDA. this made my phone bootable again.
Click to expand...
Click to collapse
also check that you dont have kies running on your pc
icecreampop3 said:
This might help?
also check that you dont have kies running on your pc
Click to expand...
Click to collapse
Thanks. Although that did not do what I expected it to (due to some license issues), but it got me into recovery mode from where I could restore a Nandroid backup. Am back on RevolutionROM for now. Looks like CyanogenMod will have to wait for me.
I experienced the very same thing for the first time today. Had checkrom revolution and ran rom manager to backup and am now unable to boot into recovery/download. Will try to hook it to odin then

[Q] CWM infinite loop

Hello everyone,
I have a P760 with V20I firmware, unlocked bootloader with CWM. I made a mistake : I tried the update through official firmware feature. It restarted my device and instead of doing the update, it went to CWM recovery menu.
Now, I am trapped on an infinite loop with this recovery menu : when I exist CWM recovery, it restarts CWM instead of the phone firmware.
I tried to restore a backup but it still restart me in CWM .
Do you have any idea how I can restore my phone ?
Thank you very much for your help.
EDIT : I tried to fastboot my device and restore CWM, I am still locked in the recovery start loop. I also tried, with fastboot to set TWM as a recovery, I still have the same issue : my device automatically reboots in TWM.
I spend 6 hours trying to apply my own advice :
http://forum.xda-developers.com/showpost.php?p=40423549&postcount=2
The only mistake I made while my phone was in "S/W Upgrade" mode : I did not put a battery in my phone and while the official LG tool access to the phone, sometimes, it "stops" the USB alimentation (which cause a phone without battery leaves the "S/W Upgrade" mode).
Now my phone is back but after spending 6 hours doing all kind of possible tests for a stupid mistake, I just want to hang myself...
Someone have a rope ?
OperationNT said:
Hello everyone,
I have a P760 with V20I firmware, unlocked bootloader with CWM. I made a mistake : I tried the update through official firmware feature. It restarted my device and instead of doing the update, it went to CWM recovery menu.
Now, I am trapped on an infinite loop with this recovery menu : when I exist CWM recovery, it restarts CWM instead of the phone firmware.
I tried to restore a backup but it still restart me in CWM .
Do you have any idea how I can restore my phone ?
Thank you very much for your help.
EDIT : I tried to fastboot my device and restore CWM, I am still locked in the recovery start loop. I also tried, with fastboot to set TWM as a recovery, I still have the same issue : my device automatically reboots in TWM.
Click to expand...
Click to collapse
Download official lg tool and connect the phone in sw mode and update it
Happened with me too
I restored by this method
Sent from my LG-P760 using XDA Premium 4 mobile app
Thank you, just as I said in the next post, my mistake was only to not put back a battery inside my phone while it was in "S/W Upgrade" mode (because, to access this mode, I remove the battery, plug the USB cable and press Vol+).
Where can LGTool be downloaded?
http://forum.xda-developers.com/showthread.php?t=2085344
Download KDZ_FW_UPD_EN.zip, extract it then start B2CAppSetup.exe : if you haven't lock LG site access, it should download the last version of LG mobile tools.

Bootloop at LG Logo After Flashing Custom Recovery

Dear XDA Members,
My P765 now is on Bootloop, it wont load the OS. Before it happened, the phone was fine with CM 10.2 and CWM Custom. I try to flash again an TWRP which can only use to flash CM 11 Unofficial. After i flash the recovery, it went normal. I restarted the phone, and the phone was working. I copy the CM 11 then i try to flash it by entering the recovery again, but the method just open the fastboot page, not the TWRP. and now the phone bootloop on LG logo. I try hard restart, and it couldnt work. i try to flash again the KDZ but the KDZ updater said my phone not recognized. Does anyone knows what should i do to fix my phone? :crying: Thanks before.
BR,
CR
HELP!!
Even my LG-p765 is stuck in boot loop... actulally ringing boot.
But for me it happened during flashing recovery for the 1st time (i used tool tip for doing it).:crying:
Now my phone shows LG logo (just for a second) and restarts. This keeps happening unless i pull out the battery.
Please post, if anyone know how to recover from this the ringing boot.
If you can manage to get into fastboot and flash uboot and xloader, then connect the phone on software upgrade mode, it should connect. Although there is a catch, THIS WILL RELOCK YOUR BOOTLOADER.
No, it won't. If he install kdz by normal usb cable (not 910k), he will still have unlocked bootloader.

Xperia C2305 refusing to flash

Not sure if this is in the correct section or not, please feel free to move it if so.
I have an Xperia C2305, used to work perfectly fine, had it rooted and had TWRP I think it was, installed using the mobileuncle app.
Not too long ago the phone was stuck on the loading screen after the Sony logo. I had then restored the phone using the TWRP and a backup I had made when I first installed TWRP and the phone worked perfectly fine after the restore.
This weekend the phone got stuck again , I booted into the recovery and did the restore again, it continued to remain stuck on the loading screen. Went back into the recovery and wiped cache etc and did the restore again and when I restarted it then was stuck on the Sony logo and would not go past that. I tried to boot into the recovery and its no longer going into the recovery no matter how many times I tried. So decided to use the xperia flashtool and flash the stock rom. The phone goes into flashmode just fine but the rom refuses to flash. On the one laptop (Win8) I tried flashing it on, it opens the TA partition, and then stops directly after that and says that I need to turn on USB debugging which of course I cannot do as the phone wont boot. On my other laptop (Win7) it keeps telling me to install drivers for it which I also have done and even tried to update the driver from device manager and manually selected the driver but of course windows tells me that the best driver is already installed. I have also tried 4 different roms just incase there was a prob with any of the roms.
The phone also won't boot into fastboot mode. I am at work at the moment and unfortunately forgot my usb with the flashtool logs. I will post those later tonight.
I have also tried the wmshua software. That also fails and the fail message is in chinese so I don't know what error it is giving.
Also tried the repair using the Sony Update Software. That also fails.
Any help here with this???????

Categories

Resources