i have an lg optimus s and i rooted it with gingerbreak and everything was fine. i downloaded and installed root tools and put on another boot animation which worked fine. but i did not backup my stock boot animation. later i was viewing apps that were already installed on my phone and deleted some i didnt think were neccassary. like voice dailer live wallpapers and sprint id etc. right after that i couldnt get anything started. like marketplace or bowser. everything kept force closing once i started it. so i restarted my phone and it kept on getting stuck on my boot animation. usually where the android shows but now its a matrix theme. so i factory reset my phone and reboot and i dont have a boot animation anymore and it still wont turn on. any suggestions?
Just now a realized you wrote optimus S. Nevermind...
You can use the method described in this thread to get the latest official ROM for your phone directly from LG then flash it using KDZ.
Use the method under the title "How to get stock FW, which should be in my device (FW that LG update tool provide me)" that worked for me some days ago.
Get KDZ from here: http://www.4shared.com/file/UleS4dP3/KDZ_FW_UPD_EN.html
I don't have a link for a guide on how to use KDZ, but I think is worth reminding you to disable the lg modem from the device manager in windows.
Click to expand...
Click to collapse
ok.. so......it wont open the file viewer for my phone
Use the link:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=<model_of_phone>&esn=<serial_number>.
I used the LG update mobile to see the Sprint/LG phones and I think the code is one of these:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ok so the lg update connects to my phone and what do i do next?
Related
Hello, all.
Well .. I don´t know where to start, but I know that I am very sad. Last Saturday, I went first use ODIN to return the original version of Android on my gadget. Apparently, everything went according to the tutorials forum and XDA initially ODIN began updating.
I don´t know why, at the first stage of the upgrade, the Vibrant display stayed with color pink and stopped updating. I waited for about 30 minutes and nothing changed Vibrant and not restarted.
I decided to restart it manually and got the screen below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From that moment on my computer (Windows 7) did not recognize the more Vibrant via USB. Likewise, I can not leave it in download mode (I've tried everything). It is as if the USB does not recognize anything...
I ask the more experienced here: You can still retrieve it? I'm in Brazil and apparently they will not support this case, even though I pay for it.
Please can you help me?
Sure.
I got the same problem with U. The same screen, can't enter the download mode. Is there anybody know how to solve this problem>? One more question, can T-mobile repair that?
Same Here
I got the same screen when I tried to flash back to stock from eugene373's froyo rom. Any help for us noobs would be really appreciated.
Any one have this problem pm me im sure I can walk u thru this
Sent from my SGH-T959 using XDA App
Hello!
A month or two ago I bought the the non-US Atrix and I wanted to have CM7 on it.
As I thought the information on the steps over at this page would work even for the international Atrix I tried to flash clockwork recovery, and little did I know that it didn't work when selecting Atrix 4G as model.
When trying to get into android recovery returned the error "Failed to boot 2" I didn't think too much of it for the time being as I could boot Android as usual.
Now when there is a new system update available for my Atrix I obviously want to install that since I still haven't gotten CM7 to work. But when the phone restarts to install the update it gets stuck at "Failed to boot 2 Starting RSD mode". Restarting doesn't work since when Android starts up it wants to reboot into the installation of the update.
Is there anyone who knows or have tips on how to solve this problem. I would really like to be able to use my phone again.
Use the Motorola update tool.
Cwm didn't work provably cuz your bootloader isn't unlocked (?)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I still have the problem where my phone wants to restart every time I start it, and for Motorola Software Update to be able to update I have to have the phone connected during the whole process.
Or is there another way of doing it that I don't know about?
Hi Guys and thanks for you attention.
I will try to make this as simple as possible. The phone of my friend was soft bricked
he was on 2.3 and tried to install a firmware that was not for that phone and he did not manage to install it
when he tried latter the motorola thinghy told him to Update the firmware and transform his 2.3 to a 4.04
HOWEVER his phone was not booting normally he would need to enter to bootloader and select NORMAL POWER UP
tried to find out the origin of the phone and was difficult to understand his firmware is somenthing like
672.180.41.xt910.02.en.DE
so i followed the guide
http://forum.xda-developers.com/showthread.php?t=1883640
and everything when fine until i tried to install the EU OTA
obviously this is not a EU phone....
is it german for the DE at the end?
some guy in another forum is mentioning that maybe this is the razr developer edition (????)
at any rate what i need to do is to install the original OTA but i have no idea which oe can be ..
funny enough if the phone is powered off would automaticly turn on and boot and stay in motorola logo.
any help would be very much appreciated
here you can guys look at some photos that can help
http://imgur.com/a/EQjrq
Hi guys after looking i found a nice collection of firmwares
http://sbf.droid-developers.org/umts_spyder/list.php
my main problem was that i did not know the firmware but now following this image
i assume is the 6.7.2.-180_SPU-19-TA-11.6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
now after download i try to flash that and i got a error
SIGNATURE verificacion failed
I don't understand what OTA would be "allowed " to install
any help is very much apreciated
Thanks
After some doubts (on rds lite the phone details apear as N/A)
i used the ota 672.180.41.xt910.02.en.DE
And phone is working perfectly
Thanks
So, I decided to delete some bloatware, ended up deleting the bloatware that kept my phone running and now I can only go on TWRP, I have no backup and LG hasn't released the stock yet so I guess I have to wait for my dead phone to get a stock rom? That is unless there's another way?
Welcome Back...
Calcious said:
So, I decided to delete some bloatware, ended up deleting the bloatware that kept my phone running and now I can only go on TWRP, I have no backup and LG hasn't released the stock yet so I guess I have to wait for my dead phone to get a stock rom? That is unless there's another way?
Click to expand...
Click to collapse
1) Download The Latest LG Drivers For Your Computer..
2) Install The LG Tool Software..
3) Connect With Your Original Charge / Data Cable..
4) Select "Update Recovery"..
5) Relax... It Will Be A While..
Welcome Back To The World Of The Living Phones.... And To *10c*...
I did the same thing. spent a couple hours trying to fix it. LgTool tells me phone is on current software and refuses to do an update even from the recovery console. scratching my head on this one...
LG Mobile Support Tool Errors out. Extracted KDZ image for system.img cant be flashed with TWRP (Something along the lines of the file being too big).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Problem solved:
https://forum.xda-developers.com/android/development/guide-restoring-soft-brick-mp450-stylo-t3681130
Hi there.
I just want to make some premises:
-The device is NOT rooted
-The device was NOT flashed or been modified in any way
Anyways,
I just picked up this phone after some years of being in some boxes, and wanted to see if it still works.
Here's what he does in booting:
-Logo
-Logo with screen less brighter
-Vodafone animation (yeah, my phone is branded)
-Stuck (like the image)
-Home button light still flashing tho
I tried to hard reset it, it kinda works, by booting, going into the setup, and 1-2 seconds later it boots itself straight into the animation (yup, no logo) and remains stuck.
I seriously don't know what to do.
Can you guys please help me out?
Thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you tried reinstalling the stock rom?
RodrigoAyuso said:
Have you tried reinstalling the stock rom?
Click to expand...
Click to collapse
yes and no
let me explain:
yes because I have everything set up for the process
and no because the LG softwares don't recognize the phone
Rust Metal said:
yes and no
let me explain:
yes because I have everything set up for the process
and no because the LG softwares don't recognize the phone
Click to expand...
Click to collapse
in short, no
[FIXED]
so I recently fixed, here's what I did:
-Downloaded and installed KDZ;
-Picked my software file (un-branded, while I were at it)
-Opened KDZ with Administrator Privileges (very crucial step, or else KDZ will crash for some unknown reasons)
-Flashed
-Waited
-Done