my motorola photon total daed!
help me,how to fix them?
pls
sorry for my english because i am from indonesia
glfc07 said:
my motorola photon total daed!
help me,how to fix them?
pls
sorry for my english because i am from indonesia
Click to expand...
Click to collapse
Can you tell us if its rooted unlocked bootloader etc..
Sent from my MB855 using xda premium
edward.hidalgo said:
Can you tell us if its rooted unlocked bootloader etc..
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
my photon not root and bootloader still locked.
my photon daed total after flashing 2.3.4-4.5.1A-1_SUN-198_6-CM 10/2/11 latest SBF.
after flashing my photon normal running,but after 3 hours of death
then I go recovery, wipe the data and cache. when wipe cache does not finished.
then I reboot,but can boot.
glfc07 said:
my photon not root and bootloader still locked.
my photon daed total after flashing 2.3.4-4.5.1A-1_SUN-198_6-CM 10/2/11 latest SBF.
after flashing my photon normal running,but after 3 hours of death
then I go recovery, wipe the data and cache. when wipe cache does not finished.
then I reboot,but can boot.
Click to expand...
Click to collapse
So does it hang on the Motorola screen or does it not turn on at all
Sent from my MB855 using xda premium
edward.hidalgo said:
So does it hang on the Motorola screen or does it not turn on at all
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
does it not turn on at all,
screen and battery was hot.
glfc07 said:
does it not turn on at all,
screen and battery was hot.
Click to expand...
Click to collapse
I have no idea if its not turning I would probably tell you to try and run sbf again
Sent from my MB855 using xda premium
It sounds like your battery needs to be charged. Get an external charger, or charge it in another phone. Once it is charged, you may need to do a hard reset.
I can't go to bootloader so I can't flashing RSD
battery is full, after charger with dekstop charger
If you can't get into bootloader with volume up and power, or with volume down and power button, then I think you have a brick.
glfc07 said:
my motorola photon total daed!
help me,how to fix them?
pls
sorry for my english because i am from indonesia
Click to expand...
Click to collapse
delete...............
Charge the battery manually, red wire to positive and black to negative.
Sent from my MB855 using XDA App
bricky23 said:
If you can't get into bootloader with volume up and power, or with volume down and power button, then I think you have a brick.
Click to expand...
Click to collapse
if true my photon bricks, how to fix it again?
jokersax11 said:
Charge the battery manually, red wire to positive and black to negative.
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I did'nt understand your meaning.pls explain again more detail!
sorry for my english again
maybe my photon have short-circuit.
because it was hot on the screen and the battery.
but I don't know! how to fix?
pls help me how to fix short-circuit on motorola photon
Take battery out, cut a usb cable(any kind), red wire to positive and black wire to negative. Plug cable into changer. Wait 30 minutes. Unplug and try again
Sent from my MB855 using XDA App
If you have a brick....you're kinda outta luck. But.....there should be a stock file to flash via SBF if you can still get to that part. Not sure if you can......
I had the same looking problem. But my screen and battary was cool. When I tried to turn it on, nothing happend, even when I connected a charged, led showed nothing.
To make it work I did such things:
-firsty take the battery out for a while, then put in
-connect via USB to PC and push power button
-without disconnecting it from UBS, take out the battery for a second and put it in again.(then it turnes on by it selfe, without pushing a poer button. If it not pappens try to push it.)
I repeated this a lot of times, but at the end it turned on)))
thanks for all solution
I will try one by one
I will tell again the result
Also, pull battery, let both cool down, freeze battery, then charge phone. Had to do it with a Sony Erricson x10a
Sent from my SGH-I997 using XDA Premium App
Related
I cannot seem to get my phone to just go into charge only mode. I haven't been able to for a while, is there a fix for this?
Sent from my MB860 using XDA App
If you're talking about what I think you are, go to Settings, Applications, Development and uncheck Stay Awake. I had the same problem and that seemed to have fixed it.
mvgc3 said:
If you're talking about what I think you are, go to Settings, Applications, Development and uncheck Stay Awake. I had the same problem and that seemed to have fixed it.
Click to expand...
Click to collapse
This will allow for me to turn the phone off and plug in the charger and the phone will go into the "Charging" mode instead of booting up... mine just sits on the motor logo and never goes into that mode... I am using tenfars newest recovery and beta 4 gingerbread... not sure if those could affect this charging mode...
Sent from my MB860 using XDA App
sublimejosh2000 said:
This will allow for me to turn the phone off and plug in the charger and the phone will go into the "Charging" mode instead of booting up... mine just sits on the motor logo and never goes into that mode... I am using tenfars newest recovery and beta 4 gingerbread... not sure if those could affect this charging mode...
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Sounds like the question I just asked a couple min before you... but yea, same problem, phone off , plug in, phone stuck at moto logo.
mysticdrew said:
Sounds like the question I just asked a couple min before you... but yea, same problem, phone off , plug in, phone stuck at moto logo.
Click to expand...
Click to collapse
It requires a battery pull also.... wonder what is causing this...
Sent from my MB860 using XDA App
sublimejosh2000 said:
It requires a battery pull also.... wonder what is causing this...
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
My guess is either 2.3.4 (i'm on the "ota" version and you're on hktw) or being unlocked.
Leaning towards unlock... but who knows. Anyone unlocked not on 2.3.4 have this issue?
Better question. Why are you turning it off to charge it? Just plug it in.
Sent from my MB860 using XDA App
totalimmortal363 said:
Better question. Why are you turning it off to charge it? Just plug it in.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Sometimes u drain your battery to the point it shuts off. And sometimes you want a quicker charge. I don't think he needs to validate why though...
i had the same problem. i would drain the battery accidentally, plug the phone into the charger, and it would hang on the moto logo. i would have to pull the battery after letting it charge for a while and it would boot up.
i'm almost certain all you have to do is go into System Recovery and click on charge mode. i don't think it matters if your phone is plugged in or not. just give it time to reboot on its own.
I am not using the old version of tenfar, I removed that app after putting on the new recovery. I recall the last time I used it though I definitely used the charge mode...
Sent from my MB860 using XDA App
pl0p said:
i had the same problem. i would drain the battery accidentally, plug the phone into the charger, and it would hang on the moto logo. i would have to pull the battery after letting it charge for a while and it would boot up.
i'm almost certain all you have to do is go into System Recovery and click on charge mode. i don't think it matters if your phone is plugged in or not. just give it time to reboot on its own.
Click to expand...
Click to collapse
Thanks but system recovery charge mode didn't work either and yea battery pull is and turning it it on without being plugged in is the only way to boot it.
i'm thinking its the unlock. Prior to unlocking I've never experienced such issues before.
I know the title is slightly confusing, but is there any way to make my phone not going into that charging mode when you restart and the battery shows up? I know I can have it go into recovery, but I don't want it to do either,I just want it to go straight into booting up, just like my OG Droid used to do, any help would be greatly appreciated
Sent from my DROID X2
In other words, if your phone battery dies you want it to boot when you plug it back in instead of going to the charge animation?
Sent from my DROID X2 using Tapatalk
zakth said:
In other words, if your phone battery dies you want it to boot when you plug it back in instead of going to the charge animation?
Sent from my DROID X2 using Tapatalk
Click to expand...
Click to collapse
YES! EXACTLY! It's a feature i used to hate because of battery calibration issues, but i miss it so much!
Nope you can't (and shouldn't if you could), with the GB update however, once it's in charge mode you can turn the phone off now by pressing the button.
Sent from my DROID X2 using XDA Premium App
juhde said:
Nope you can't (and shouldn't if you could), with the GB update however, once it's in charge mode you can turn the phone off now by pressing the button.
Sent from my DROID X2 using XDA Premium App
Click to expand...
Click to collapse
Or long press the power button to boot normally.
zakth said:
Or long press the power button to boot normally.
Click to expand...
Click to collapse
Sadly you can't boot until there is enough charge in the battery.... meaning you have to connect it, then remember to come back and turn it on so you don't miss calls, etc.
adrianblack said:
Sadly you can't boot until there is enough charge in the battery.... meaning you have to connect it, then remember to come back and turn it on so you don't miss calls, etc.
Click to expand...
Click to collapse
On froyo you had to wait 5 minutes, unplug then boot then plug back in. With gingerbread you can boot up right away from charge mode.
Sent from my DROID X2 using XDA Premium App
So my DX2 is DEAD and whenever I try to Start RSD Protocol process it says "Battery too low to flash" and it won't charge. Everytime I try to charge it, the phone powers on and stays on the "M" HELP?!!!
It still charges while the M is on. Just maybe let it sit like that for an hour or so then try RSD.
Sent from My Rooted DROID X2/MB870 Running CM7
Jayydude_SGP said:
So my DX2 is DEAD and whenever I try to Start RSD Protocol process it says "Battery too low to flash" and it won't charge. Everytime I try to charge it, the phone powers on and stays on the "M" HELP?!!!
Click to expand...
Click to collapse
Not trying to be unhelpful, but this post doesn't belong here in the developement forum; rather in the Q&A Forums.
DX2Trip said:
It still charges while the M is on. Just maybe let it sit like that for an hour or so then try RSD.
Sent from My Rooted DROID X2/MB870 Running CM7
Click to expand...
Click to collapse
Absolutely 100% correct. Even while displaying the "M", if you plug in using the wall charger, it will charge.
Sent from my MB870 using Tapatalk
Jayydude_SGP said:
So my DX2 is DEAD and whenever I try to Start RSD Protocol process it says "Battery too low to flash" and it won't charge. Everytime I try to charge it, the phone powers on and stays on the "M" HELP?!!!
Click to expand...
Click to collapse
When you actually brick a device, you cannot see anything and nothing, nothing will happen. You answered your own question. Just plug your phone in while on that screen and give it another try in an hour or so.
thelowend said:
When you actually brick a device, you cannot see anything and nothing, nothing will happen. You answered your own question. Just plug your phone in while on that screen and give it another try in an hour or so.
Click to expand...
Click to collapse
Yeah thats true too. No offence, just sounds like a user error. Maybe get another battery? Thats why I'm so glad when they swapped my X for the X2 they let me keep the X battery and my girls when she went to the INC2. They sent me a 1990mAh extended battery too so I got two spare original batteries I keep charged. As the other two said again, let it sit an hour or so, try RSD and I'm sure your phone will come back. Even if you get a 100% after RSD and says to manually boot this phone, if it bootloops, battery pull, go to android recovery, data and cache wipe, reboot system and all should work from there.
Sent from My Rooted DROID X2/MB870 Running CM7
thelowend said:
When you actually brick a device, you cannot see anything and nothing, nothing will happen. You answered your own question. Just plug your phone in while on that screen and give it another try in an hour or so.
Click to expand...
Click to collapse
So basically your saying it isn't bricked????? And give what another try? If it isn't bricked why should I try to SBF???
Sent from my YP-G70 using XDA Premium App
Jayydude_SGP said:
So basically your saying it isn't bricked????? And give what another try? If it isn't bricked why should I try to SBF???
Sent from my YP-G70 using XDA Premium App
Click to expand...
Click to collapse
Nope your just in a really tough spot. Try what the other poster and I suggested and report back. There's an encyclopedia of technical terms some where if you need help understanding posts.
Sent from my DROID X2 using xda premium
Jayydude_SGP said:
So basically your saying it isn't bricked????? And give what another try? If it isn't bricked why should I try to SBF???
Sent from my YP-G70 using XDA Premium App
Click to expand...
Click to collapse
You are only soft bricked, which means you only need to either wipe devak cache, wipe cache, or possibly do a factory reset. Unless you flashed a system file that put your X2 to sleep till you sbf. Now its sick and it needs to be sbf'ed. Bricked is when it needs to possibly be sent back to Big Red for a Transplant or burial.
Because it is no longer able to get juice through it's motherboard, and turn on.
"I could be wrong" but I soft brick 3 to 10 times daily. Just flashing stuff I have no business flashing. But I flash ReRecovery after every file I flash, just in-case.
I also have a Recovery on hand to restore my system.
I never flash on a low battery. Hope I explained it well enough, Good Luck!!!
I don't want you to think I was being a smart a$$ just trying to explain in a way that most understand.
appl3mac said:
You are only soft bricked, which means you only need to either wipe devak cache, wipe cache, or possibly do a factory reset. Unless you flashed a system file that put your X2 to sleep till you sbf. Now its sick and it needs to be sbf'ed. Bricked is when it needs to possibly be sent back to Big Red for a Transplant or burial.
Because it is no longer able to get juice through it's motherboard, and turn on.
"I could be wrong" but I soft brick 3 to 10 times daily. Just flashing stuff I have no business flashing. But I flash ReRecovery after every file I flash, just in-case.
I also have a Recovery on hand to restore my system.
I never flash on a low battery. Hope I explained it well enough, Good Luck!!!
I don't want you to think I was being a smart a$$ just trying to explain in a way that most understand.
Click to expand...
Click to collapse
Fantastic analogies apple
Sent from my DROID X2 using xda premium
thelowend said:
Fantastic analogies apple
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Thank You'
I get confused reading posts all day, sometimes lost, some terms confuse me to.
I'm ADHD & Dyslexic so try to understand the important part of what I need and analyze it in a way I understand it.
Just hope it helps others in the same way.
appl3mac said:
Thank You'
I get confused reading posts all day, sometimes lost, some terms confuse me to.
I'm ADHD & Dyslexic so try to understand the important part of what I need and analyze it in a way I understand it.
Just hope it helps others in the same way.
Click to expand...
Click to collapse
Take it from someone who studies Dyslexia; you handle it perfectly.
But I digress, Jay have you any news?
Sent from my DROID X2 using xda premium
External barlttery charger is what I used. I was in the same sticky spot. I went without a phone for close to two weeks. The phone would not let me charge the battery while the splash logo was showing and I hadn't gotten bsr installed yet. Look on Amazon, the chargers are only 5 bucks
Sent from my MB870 using xda premium
I also bought a external charger for around 5 bucks. Its a must have if you have more than one battery.
thelowend said:
Take it from someone who studies Dyslexia; you handle it perfectly.
But I digress, Jay have you any news?
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
No progress sadly:/ I'm going to try what the guy a couple of post above said. I'll report back with my results. Thank you guys a lot tho. Means a lot when others contribute to one person. Glad to have people like you all. Now should I charge in another Droid x2 and SBF or is there another option?
Sent from my YP-G70 using XDA Premium App
You could use the battery from the other Dx2 while yours is charging. Saves a little time both ways once your battery has enough charge to kick start at least a quarter %. You can drop it in yours and finish charging only takes 5 maybe 6 min to sbf. Good Luck.
Sent from in Your House.
appl3mac said:
You could use the battery from the other Dx2 while yours is charging. Saves a little time both ways once your battery has enough charge to kick start at least a quarter %. You can drop it in yours and finish charging only takes 5 maybe 6 min to sbf. Good Luck.
Sent from in Your House.
Click to expand...
Click to collapse
Well I don't have a second dx2 or battery:/ this sucks. We're on spring break so I cant use a friends battery
So idk how I can get it to charge.
Sent from my YP-G70 using XDA Premium App
Jayydude_SGP said:
Well I don't have a second dx2 or battery:/ this sucks. We're on spring break so I cant use a friends battery
So idk how I can get it to charge.
Sent from my YP-G70 using XDA Premium App
Click to expand...
Click to collapse
Sorry to hear that, that does kinda suck hope you get somewhere with this. I wish I had an charger for you.
Sent from in Your House.
appl3mac said:
Sorry to hear that, that does kinda suck hope you get somewhere with this. I wish I had an charger for you.
Sent from in Your House.
Click to expand...
Click to collapse
Wait! Ace posted something about this very thread on twitter the other night.
I'll be back shortly.
Sent from my DROID X2 using xda premium
Cut a micro usb cable
Strip the red and black wires
Strip the green and white wires then twist those two together
Attached the black to the negative - on the battery and the positive to the + on the battery. This will manually charge the battery.
Be warned: you can overcharge your phone. Overcharging is bad so don't do it.
Use this method at your own risk. Neither Ace nor I are responsible for what happens!
Sent from my DROID X2 using xda premium
thelowend said:
Cut a micro usb cable
Strip the red and black wires
Strip the green and white wires then twist those two together
Attached the black to the negative - on the battery and the positive to the + on the battery. This will manually charge the battery.
Be warned: you can overcharge your phone. Overcharging is bad so don't do it.
Use this method at your own risk. Ace nor I are responsible for what happens!
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
This has worked for many people like mentioned just don't overcharge.
So i unlocked my bootloader and rooted my photon i flashed cm10 on there i was at 70% battery and it droped to 49% i thought it was the rom so i went back to stock with bootloader unlocked and everything still same issue is my battery bad or is the bootloader being unlocked killing my battery
Sent from my MB855 using xda premium
thabest85 said:
So i unlocked my bootloader and rooted my photon i flashed cm10 on there i was at 70% battery and it droped to 49% i thought it was the rom so i went back to stock with bootloader unlocked and everything still same issue is my battery bad or is the bootloader being unlocked killing my battery
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Did you calibrate your battery? You are supposed to everytime you install a new rom. Charge to 100 percent, boot to recovery, wipe battery stats, drain the battery down till phone powers off, plug it in and boot to android, charge to 100 again without break.
Acvice said:
Did you calibrate your battery? You are supposed to everytime you install a new rom. Charge to 100 percent, boot to recovery, wipe battery stats, drain the battery down till phone powers off, plug it in and boot to android, charge to 100 again without break.
Click to expand...
Click to collapse
I calibrated the battery but i plugged it in after when u say boot to android do u mean boot up the phone? And what u mean without break i shouldnt use the phone while its charging?
Sent from my MB855 using xda premium
thabest85 said:
I calibrated the battery but i plugged it in after when u say boot to android do u mean boot up the phone? And what u mean without break i shouldnt use the phone while its charging?
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
If you let the phone power down by itself, when you plug it in it will boot to the charge only screen. If you hold the power button as you plug it in and keep it held it will skip that screen and boot straight to android. And yeah, try not to use the phone while its charging.
Sent from my MB855 using xda app-developers app
Thanks alot I will try that
Sent from my MB855 using xda premium
Acvice said:
If you let the phone power down by itself, when you plug it in it will boot to the charge only screen. If you hold the power button as you plug it in and keep it held it will skip that screen and boot straight to android. And yeah, try not to use the phone while its charging.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
So it didn't work for me I don't know what might be wrong
Edit: so I'm back on stock no root no nothing so I'm guessing it was either the root access or unlocking my bootloader do you have any issues with this on your phone if not can u lead to the files u have installed? Thank you in advance
Sent from my MB855 using xda premium
thabest85 said:
So it didn't work for me I don't know what might be wrong
Edit: so I'm back on stock no root no nothing so I'm guessing it was either the root access or unlocking my bootloader do you have any issues with this on your phone if not can u lead to the files u have installed? Thank you in advance
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Whats not working? The holding the power button thing? Thats ok, it doesnt screw up the process of calibrating. It will let you hold the power button and boot to android from the charging screen once it registers anything more than 0 percent. It also takes a few days of use after the calibration to really see a change. Youre just reading a little too far into it. Just boot to 100, wipe bat stats, drain it to 0, boot it back up and let it charge to 100. Use your phone normally for a few days after that and youll notice the difference.
Sent from my MB855 using xda app-developers app
Acvice said:
Whats not working? The holding the power button thing? Thats ok, it doesnt screw up the process of calibrating. It will let you hold the power button and boot to android from the charging screen once it registers anything more than 0 percent. It also takes a few days of use after the calibration to really see a change. Youre just reading a little too far into it. Just boot to 100, wipe bat stats, drain it to 0, boot it back up and let it charge to 100. Use your phone normally for a few days after that and youll notice the difference.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
All the steps u gave me work but it still skips from 70%-49% batterym so what ur saying is that I have to wait a few days before it stops draining the battery?
Sent from my MB855 using xda premium
thabest85 said:
All the steps u gave me work but it still skips from 70%-49% batterym so what ur saying is that I have to wait a few days before it stops draining the battery?
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Yes. It willmore than likely stop doing that after a few charge cycles. If it doesnt, report back =)
Acvice said:
Yes. It willmore than likely stop doing that after a few charge cycles. If it doesnt, report back =)
Click to expand...
Click to collapse
Okay so I went ahead and got a replacement battery from sprint today I'm on 6 hours of usage and I'm at 55% no battery drain I'm afraid that rooting or unlocking the boot loader did something to my battery do u think that's possible thanks for all the help @acvice
Sent from my MB855 using xda premium
Today morning, my phone was at a charge of 10% and I put it on charge and after sometime my phone went off and since then it's not starting.
I tried the USB cable. The charger also but nothing is working.
I don't know how to start it.
Any type of help will be very appreciated.
Phone does not turn on when battery is <5%. Charge your phone using the original Motorola charger, preferably use wall charger for say 30 mins at least. If it does not work, try different plug point.
Sent from my XT910 using xda app-developers app
tankviv said:
Phone does not turn on when battery is <5%. Charge your phone using the original Motorola charger, preferably use wall charger for say 30 mins at least. If it does not work, try different plug point.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
I have put my phone on charge now. But the screen is black. I will leave it for another 30 minutes.
I have also tried different plug points. Nothing is coming on the screen.
Well if still nothing works you can use the factory cable either make it other buy one on ebay and use it Rsd lite back to stock and bring the phone back up to life
Sent from my XT910 using Tapatalk 2
naifs_br10 said:
Well if still nothing works you can use the factory cable either make it other buy one on ebay and use it Rsd lite back to stock and bring the phone back up to life
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Due to that will I lose all the data on my phone?
rahulwadhwani said:
Due to that will I lose all the data on my phone?
Click to expand...
Click to collapse
no a factory cable just forces your phone to charge
Joseph V said:
no a factory cable just forces your phone to charge
Click to expand...
Click to collapse
It actually doesn't charge the phone but it just connect directly to the hardware while ya flashing ya phone using rsd lite .
I mean it just resolve battery low problem while flashing
Yeah it ll delete all ya data not internal or external sd card data .
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Yes sir you will lose it all
Sent from my XT910 using Tapatalk 2
factory cab?
not working? help
That happened to me with my htc desire I used to have but I wiped battery stats in cwm recovery before mine went blank. Have you tried plugging the phone up without the battery and putting the battery in
Sent from my SCH-I500 using xda premium
iAr0ma said:
That happened to me with my htc desire I used to have but I wiped battery stats in cwm recovery before mine went blank. Have you tried plugging the phone up without the battery and putting the battery in
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Have you ever seen a RaZr? It's unibody, you can't just take the battery out... At lest not easily.
Oh my bad no i haven't seen one ignore that one. Lol
Sent from my SCH-I500 using xda premium
Cannot remove battery
Sent from my XT910 using xda app-developers app
rahulwadhwani said:
Due to that will I lose all the data on my phone?
Click to expand...
Click to collapse
Yeah ya ll loose all ya data like Google accounts, moto blur accounts and apps they attached with and this process will even format ya internal memory as well .
But loosing data and upgrading to latest kernel ain't it good .
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
I just had this issue last night. The phone wouldn't turn on but the notification light was bright white and wouldn't go out. I just left it plugged into the computer overnight and by the time I woke up, the phone was on and had a 61 percent charge this was over a period of about 7 hours.
Sent from my XT912 using xda app-developers app
Have you tried holding the power button for about 10 seconds?
Sent from my XT912 using xda app-developers app
immikevalentino said:
I just had this issue last night. The phone wouldn't turn on but the notification light was bright white and wouldn't go out. I just left it plugged into the computer overnight and by the time I woke up, the phone was on and had a 61 percent charge this was over a period of about 7 hours.
Sent from my XT912 using xda app-developers app
Click to expand...
Click to collapse
But in my case its a bit different, the notification light is no more blinking or something. It's just the black screen. Not turning on at all.
Tonight I will leave my phone on charge for more than 7 hours for sure. I really hope it starts.
Thanks for the reply.
RBarnett09 said:
Have you tried holding the power button for about 10 seconds?
Sent from my XT912 using xda app-developers app
Click to expand...
Click to collapse
Yes, I have tried that also but it doesn't work.
Take it to service centre i believe its not soft bricked ,hard bricked or software problem it looks like hardware problem or LED problen
Edit : as far as i know or i can read all comments ya have tried all the method to fix it up but none of em seems to be working . Sad but thats true ya got hardware problem
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
anurag.dj2u said:
Take it to service centre i believe its not soft bricked ,hard bricked or software problem it looks like hardware problem or LED problen
Edit : as far as i know or i can read all comments ya have tried all the method to fix it up but none of em seems to be working . Sad but thats true ya got hardware problem
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
I have ordered for a factory cable. I am gonna try putting up a new ROM on the phone. Let's see if that works.
I recalled one more thing, before my phone got bricked, the day prior to that I used battery calibration application on my phone. Do you think that would have affected my phone?