I try to Install New Rom(GingerDX.v017(nAa+Kernel)) in Custom Kernel.
I did followed the instruction as in this http://forum.xda-developers.com/showthread.php?t=1200675
But I didn't Unlock bootloader and install Update.zip from XRecovery.
When I reboot my phone it didn't boot and Freeze on Sony Ericsson white brand.
Please Help me guys.My Phone Need Your Helps.
Sorry For my bad English.
I have the same problem! but I try install the rom gingerbread of nobodyall and I try no instal via xrecovery update.zip and this say me error! and I try to reboot and this turn on and freeze with the letters "sony ericsson" :S somebodyhelp us !
Sure, just need to read FAQ and post the question in proper forun section!
http://forum.xda-developers.com/showthread.php?t=840356
First post
Dramaqueens....
akorouf said:
I try to Install New Rom(GingerDX.v017(nAa+Kernel)) in Custom Kernel.
I did followed the instruction as in this http://forum.xda-developers.com/showthread.php?t=1200675
But I didn't Unlock bootloader and install Update.zip from XRecovery.
When I reboot my phone it didn't boot and Freeze on Sony Ericsson white brand.
Please Help me guys.My Phone Need Your Helps.
Sorry For my bad English.
Click to expand...
Click to collapse
Don't worry i know what to do.
First download PC companion on computer. Then install drivers on computer. After that open PC companion and click Update phone on Support zone. You will see a window witch will ask you if you want to restore your phone. When computer will be ready for restoring your device plug in your phone into computer via usb, hold home and power button until your phone turn off and quickly press and HOLD back button(if your phone is on). If it is not, just press back button and THEN plug it to computer KEEPING holding back button. After restoring you will have a new x10 mini=). Good luck.
P.S. sorry for my bad English
Mrakoris/ said:
Don't worry i know what to do.
First download PC companion on computer. Then install drivers on computer. After that open PC companion and click Update phone on Support zone. You will see a window witch will ask you if you want to restore your phone. When computer will be ready for restoring your device plug in your phone into computer via usb, hold home and power button until your phone turn off and quickly press and HOLD back button(if your phone is on). If it is not, just press back button and THEN plug it to computer KEEPING holding back button. After restoring you will have a new x10 mini=). Good luck.
P.S. sorry for my bad English
Click to expand...
Click to collapse
This is about unlocking the bootloader and then install custom ROM.
rooterdam said:
This is about unlocking the bootloader and then install custom ROM.
Click to expand...
Click to collapse
But the title is "break my x10 mini".
Mrakoris/ said:
But the title is "break my x10 mini".
Click to expand...
Click to collapse
Yes.
Sent from my E10i using XDA App
Wrong forum, not related to development AT ALL.
remove black rubber behind the phone and thr u can see the battery pin...unplug and plug it the phone will be switched off....now use SE pc companion and restore ur x10 mini.....
dung flash tool de dua ve rom stock. minh da tung bi nhu the nay va da lam duoc. sorry i'am Vietnamese
Related
Hello dear xda users.
Today since 1-2 hours ago something terrible happened. My X10i .. keeps rebooting at the "Sony Ericsson" startup.
History:
I updated to 2.2 Beta 4, but I forgot to update the kernel so the phone kept rebooting, but not at startup, only after a couple of minutes.
I flashed to the required kernel, but decided to go back to Beta 3 instead, and the same problem occured here too, also that the wifi and mobile network were out of function.
And I remembered that I had made an backup of my original version with xRecovery, so I restored the phone and tried to switch back to Beta 3 and this is when the **** happened..
Am I screwed?
Stuffs Ive tried:
* Flash the version back (cannot enter flash mode anymore) = fail
* Tried to make a factory reset through PC Companion (cannot enter flash mode) = fail
I need help guys, this phone is only 2 weeks old. I just want to cry, dunno what to do
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Freak174 said:
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Click to expand...
Click to collapse
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
rendeiro2005 said:
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
Click to expand...
Click to collapse
Thanks for the reply, but how am I supposed to flash if I cant get the green light (called flashmode?)
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
rendeiro2005 said:
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
Click to expand...
Click to collapse
Yea I already tried that out, without success..
Freak174 said:
Yea I already tried that out, without success..
Click to expand...
Click to collapse
i just remember something that`s basic
remove/install PCC & SEUS again you may have a problem with drivers
HAHAH I WAS PRESSING THE DAMN BUTTOM IN THE MIDDLE FOR CHRIST SAKE! HAHAHAHAHAAH
You know when you get so, what should I say.. scared of not being able to solve it, you get blind!
IM SO FUUUUCKING GLAD SORRY FOR THE F WORD BUT YEEEEEEAAAA
Lol... But good that you can go on again....
sent from my 2.2 X10
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
mustbiw said:
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
Click to expand...
Click to collapse
lol...how many threads are you starting for this...
As I said in the dev section thread you started.
Attach your phone to the pc and run SEUS or PC companion and follow the instructions
pc companion cannot detect phone coz x10 canot enter to main menu.. what should I do bro...
mustbiw said:
pc companion cannot detect phone coz x10 canot enter to main menu.. what should I do bro...
Click to expand...
Click to collapse
OK,
Have you got SEUS?
If not google it and download it.
Once you have done that send me a PM
Been through this pickle too, dont worry, go in dev forum search your generic rom, and flashtool and follow the instructions to flash the generic rom, ps, in xrecovery dont forget to make a backup of ur generic rom, saves a lot of time when things like this happen
Sent from my X10i using XDA App
gregbradley said:
OK,
Have you got SEUS?
If not google it and download it.
Once you have done that send me a PM
Click to expand...
Click to collapse
I've got SEUS but stop in the 3rd stage coz it cannot detect my phone since it's always reboot every time...
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
mustbiw said:
I've got SEUS but stop in the 3rd stage coz it cannot detect my phone since it's always reboot every time...
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
Click to expand...
Click to collapse
Do you have recovery installed?
If so, when you see the sony ericsson screen keep hitting the back key (The one on the right on the front)
That will put you into recovery
If not download flashtool from here
and install it on your pc..
attach phone and you will see it connect.
Click root
then ask root permissions
then xrecovery
PS, in SEUS are you holding down the back button...
Turn the phone off (Pull the battery out if you have to and put it back in)
then hold down back button when SEUS says so
mustbiw said:
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
Click to expand...
Click to collapse
The button key is the back button, press it after you boot the phone ay the sony ericsson and yes you can flash custom roms from sd card, just be sure youre on the right baseband, if not flash it with flashtool. Have fun
Sent from my X10i using XDA App
gregbradley said:
Do you have recovery installed?
If so, when you see the sony ericsson screen keep hitting the back key (The one on the right on the front)
That will put you into recovery
If not download flashtool from here
and install it on your pc..
attach phone and you will see it connect.
Click root
then ask root permissions
then xrecovery
PS, in SEUS are you holding down the back button...
Turn the phone off (Pull the battery out if you have to and put it back in)
then hold down back button when SEUS says so
Click to expand...
Click to collapse
Many thank's now I can flash my X10 with froyo_Achotjan v03, but still have a problem with the phone signal, though I have followed all instruction with dev tool...
try to find the app called
dev tools
Goto bad behaviour and them crash system server.
If that does not work make sure you are on the correct baseband.message me if you need more help
mustbiw said:
Many thank's now I can flash my X10 with froyo_Achotjan v03, but still have a problem with the phone signal, though I have followed all instruction with dev tool...
Click to expand...
Click to collapse
Sent from my X10i using XDA App
gregbradley said:
try to find the app called
dev tools
Goto bad behaviour and them crash system server.
If that does not work make sure you are on the correct baseband.message me if you need more help
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I have done that but still I there's no phone signal... and I tray many time to enter xrecovery by pressing power + back button but it never enter the xrecovery..
what shoud I do..
Don't press the power key.
turn the phone on
When you see the sony ericson logo repeatedly press the back key.
If it does not go into recovery you have not installed it on your phone
Sent from my X10i using XDA App
gregbradley said:
Don't press the power key.
turn the phone on
When you see the sony ericson logo repeatedly press the back key.
If it does not go into recovery you have not installed it on your phone
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I have finished successfully using SEUS but it still reboot and never enter main menu, in the past I have installed xrecovery,but is it still there after I installed with SEUS?? what should I do...
If your phone doesnt work after flashing with SEUS then I think your phone is broken.
SEUS a clean install of the latest SE software so it should work.
Did you choose to do an update or a factory reset and update.
Try again in PC Companion and choose factory reset and update.
Go here to download PC Companion
mustbiw said:
I have finished successfully using SEUS but it still reboot and never enter main menu, in the past I have installed xrecovery,but is it still there after I installed with SEUS?? what should I do...
Click to expand...
Click to collapse
gregbradley said:
If your phone doesnt work after flashing with SEUS then I think your phone is broken.
SEUS a clean install of the latest SE software so it should work.
Did you choose to do an update or a factory reset and update.
Try again in PC Companion and choose factory reset and update.
Go here to download PC Companion
Click to expand...
Click to collapse
I do update till complete successfully...
Viola....
Many for thanks all help, I tray to upgrade again using SEUS then after finish I do release the batteray for a minute then I start and everything gone well back to original 2.1...
Thanks everybody....
No problems...dont forget to hit thanks button
mustbiw said:
Viola....
Many for thanks all help, I tray to upgrade again using SEUS then after finish I do release the batteray for a minute then I start and everything gone well back to original 2.1...
Thanks everybody....
Click to expand...
Click to collapse
gregbradley said:
No problems...dont forget to hit thanks button
Click to expand...
Click to collapse
My Last Problem is Phone signal, its always no service though I have use dev tools or factory format with sd card unplugged.... what should I do...
goto settings>about phone and tell me what the phone says for
android version
baseband
kernel version
mod version
i.e the last 4 things on that page
mustbiw said:
My Last Problem is Phone signal, its always no service though I have use dev tools or factory format with sd card unplugged.... what should I do...
Click to expand...
Click to collapse
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
XTacDK said:
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
Click to expand...
Click to collapse
restore your phone via SEUS from pc companion it will revert your kernel to stock and install the stock rom
Don't worry, I did the same thing the first time I tried to install Zombie Panic. Download the Sony Ercisson Update Service from here, insatll it on your PC and follow the instructions to install (even if it says you have the latest version). It'll take you back to Stock ROM and your phone will boot.
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
XTacDK said:
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
Click to expand...
Click to collapse
you should start the update process while the phone is disconnected and press repair then when asked connect the phone while you are pressing the back key to connect via flash mode.
Wait.. but i choose the reprair phone option and now it trying to reprair it, i just believe, at this will save my phone
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
XTacDK said:
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
Click to expand...
Click to collapse
for mini you can't take the battery out
just turn off the phone for 5 seconds press the back key and connect the phone to the pc it should the start the repair via flash mode
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
XTacDK said:
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
Click to expand...
Click to collapse
mmm try to flash a stock kernel from the forum on this link via flashtool
http://forum.xda-developers.com/showthread.php?t=1254225
and then update via SEUS it should work...
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
XTacDK said:
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
Click to expand...
Click to collapse
well the only way to remove the battery of x10 mini is to disassemble it so send it for repair is better.
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
well man this is not the worst! i have now while talking to you the worst brick! i crashed my bootloader and i can't even flash my stock kernel!
i cant do this too,,, But i think if i restart the phone, so i see kernel nAa 6 logo and i will install mCM7! I must be optimist, cause i want to cry now ;D
XTacDK said:
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
Click to expand...
Click to collapse
Prepare SEUS on repair mode, until message to connect phone.
Press and hold power button, then press home button (don't release power button) and wait phone off. press and hold back button then connect the usb cable.
thank you!!!!you saved my phone~! Now can install mCM7.... thank you!!!
I was tryin to install MiniCM7 and during my noobish attempt I pretty much deleted everything on my phone. Factory reset and such. And I attempted to fix by rebooting the phone but now all I get is the Sony Ericsson Logo and when I try to turn the damned thing off it turns back on. I tried SEUS but even after quickly hitting back and plugin the usb cable after Home+Back+Power no dice. Can anybody out there help this desperate noob soul :c
Cant you pull out the battery connector underneath the rubber bit next to the camera to turn it off??
Sent from my U20i using xda premium
Battery Disconnected What now?
Hi,
I tried to upgrade mi xperia neo to Tweake 1.0 with the recovery, and now dont start.
When i power the phone or plug the charger appears the Sony Ericcson logo and continues there all time.
I can´t enter in flash mode (son i can´t use seus or flash tool), always appears other time the sony ericsson logo.
The bootloader is closed.
Can anyone help me?
Thanks
Are you sure that you are doing the correct procedure to use flash mode on the phone? Here it is:
1. Turn off the phone.
2. Remove the battery for at least 10 seconds.
3. Insert the battery again.
4. Press and hold the "back" button on the phone.
5. While still holding the "back"button pressed connect the phone with teh usb cable to the pc. Flashtool should now recognize the phone.
alekmzn said:
The bootloader is closed.
Click to expand...
Click to collapse
So, there are two ways:
1. flashmode (green LED) have still work, so do as neptun2 advices.
1. Turn off the phone.
2. Remove the battery for at least 10 seconds.
3. Insert the battery again.
4. Press and hold the "back" button on the phone without pressing "power on" button
5. While still holding the "back"button pressed connect the phone with teh usb cable to the pc. Flashtool should now recognize the phone.
Click to expand...
Click to collapse
or
2. if recovery still works, try to do all wipes again (data, cache, dalvik-cache)
Thaks to all.
I can´t access to the recovery, and i don´t see the green led when i plug the cable.
check this out. may be it will help you...
http://forum.xda-developers.com/showthread.php?t=1254409
Cheking, Thanks!
Did u try wotan client ? Its pretty simple and easy to use !, Google it if u didnt already.
Sent from my Xperia Neo using XDA
Moursy93 said:
Did u try wotan client ? Its pretty simple and easy to use !, Google it if u didnt already.
Sent from my Xperia Neo using XDA
Click to expand...
Click to collapse
the problem of Wotan client is that is needed flash mode, so i can´t use it.
Thanks!
At this moment the problem is solved.
It has damaged the trim area, Alejandrissimo support me to repair de problem.
Thnaks to all!
Great notice for you!!!!!
Congratulations!!!!!!!!
alekmzn said:
At this moment the problem is solved.
It has damaged the trim area, Alejandrissimo support me to repair de problem.
Thnaks to all!
Click to expand...
Click to collapse
I'm with the same problem here in my Xperia Neo, it just shows Sony Ericsson, i can't open recovery, can't do hard reset, and can't reset via PC Companion.. :/
@edit
problem solved, i made the bootloader (first time *-*), then i flashed a stock rom by SE, and it worked!
Hi,
I would like to ask you for advice before throwing my X10 mini away and buying something else.
I have had MiniCM7 installed for a very long time (more than a year), and upgraded to all versions without any problem. Today I installed MiniCM9 3.0.2, but I decided to reinstall MiniCM7 because of some problems detected with this version, so I went to SEUS, downgraded to 2.1.1.A.0.6, installed BusyBox, xMiniRecovery, root and flashed MiniCM7 2.2.0 and gapps. I have done it quite a lot of times before.
But, when I tried to reboot onto MiniCM7 2.2.0, my phone was stuck onto Sony Ericsson logo. Here's what I did:
1) Ok, Home+Power and reenter into recovery by pressing back key. No, no luck, it doesn't enter into any recovery.
2) B plan, I'll go to SEUS again. Home+Power, connect USB and keep back key pressed. Nothing, SEUS doesn't recognize anything, but Companion does activate a little popup on my Windows, as if it detects my phone plugged into my computer. No red, yellow, or green lights in the phone.
3) C plan. Flash kernel directly. I downloaded kernel from http://forum.xda-developers.com/showthread.php?p=17674938#post17674938 and used FlashTool. But, again, when I press Home+Power, connect the USB cable and press back key, it doesn't recognize anything, FlashTool is waiting for me to connect something. Antivirus is disabled.
If I keep back key pressed, no SE logo appears; black screen. If I release back key for a little while, SE logo appears and it gets stuck.
Both if I connect it to the computer or to the power socket, no green/yellow/red led appears.
Does anybody have any idea? Everything (cable and phone) were working wonderfully before flashing 2.1.1.A.0.6 for the last time.
Kind regards,
Jordi
Ok,before u try this u should know it will delete everything of phone memory:apps,contacts,etc.
And it removes root and recovery and phone will be like the day u bought it except that bootloader is not touched if unlocked stays unlocked
TRY AT UR OWN RISK
Steps:
1-download sony erricsson pc companion
2-click support zone and choose software update
3-before clicking continue click on repair phone
4-wait till loads and choose phone type
5-concentrate on this one cuz it has 2 methods
5a:if ur phone doesent restart automaticlly just plug usb in computer first then with phone powered off hold the back button and connect the usb cable only let hold when it says u can
5b:if ur phone DOES restart automaticlly remove battery till u reach this step and put back cover bedside till ur done with this method what were gonna do is when we reach this step we quickly plug battery and before it restarts just hold back and insert usb cable.
6-wait to install
7-congratulations unbricking
8-(optional):click the thanks button :xD
Sent from my U20i using XDA
Hi,
Thank you very much for your quick answer. I had never realized the procedure shown in steps 2-4.
But Companion refuses to install it! "It's impossible to install or setup update components of phone sotfware" grrrrrrrrrrrrr Tomorrow I'll try to get another computer and follow your procedure.
Thank you very much
Always happy to help as ive been in such issues alot
Sent from my U20i using XDA
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
SmG67 said:
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
Click to expand...
Click to collapse
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
jordisegurapla said:
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
Click to expand...
Click to collapse
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I've tried that already, doesn't work...
Looks bad, huh???
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I do not know what did I do, but by trying for the 1000th time to do the Home+Power+Back key combination with USB connected and keeping Back key pressed, and pressing and releasing it madly afterwards, while FlashTool was waiting for me to flash MiniCM7, FlashTool has reacted!!!!!! It allowed me to install MiniCM7 again!!!
What happened? I do not know, perhaps I pressed Back key just the microsecond that the hardware needed it.
Thank you very much!!!!
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
SmG67 said:
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
Click to expand...
Click to collapse
Ok, you are right again; FlashTool allowed me to install the kernel ;-) and then, everything else.
Thank you very much, really!!!