Related
This ROM has been superceded by MCR 1.5 here.
P
aad4321 said:
Sweet, i might give it a shot. quick question tho... will this wipe the device?
Click to expand...
Click to collapse
Modacp said:
I'm pleased to present my MoDaCo Custom Nexus One ROM! No 'wipe' is required to use this ROM.
Click to expand...
Click to collapse
Reading comprehension much?
aad4321 said:
just to confirm, wavesecure add on is a anti theift program which is a monthly service?
Click to expand...
Click to collapse
No, there is no monthly service charge...at least not yet. I have been using wave secure for a little while now, and for a 3rd party security app its pretty damn good.
I tried to flash and got this:
Code:
E:No space left on device
E:Error writing Boot:
E:Failure at line 369:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.
I tried to reboot and it wouldn't boot, so I pulled the battery and went back into recovery and tried to apply the NANDROID backup, seemed to apply fine, but now it always boots into bootloader, no matter what I do. I can still make it into recovery so it isn't all lost, but I can't do anything else from there.
Bizarre, never seen an error like that before!
What happens if you try to re-apply the ROM?
P
ccunningham83 said:
I tried to flash and got this:
Code:
E:No space left on device
E:Error writing Boot:
E:Failure at line 369:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.
I tried to reboot and it wouldn't boot, so I pulled the battery and went back into recovery and tried to apply the NANDROID backup, seemed to apply fine, but now it always boots into bootloader, no matter what I do. I can still make it into recovery so it isn't all lost, but I can't do anything else from there.
Click to expand...
Click to collapse
did you wipe then restore nandroid?
anyone get tether working on this rom?
Only wireless tether is supported at the moment. Wired tether coming in a future release.
P
modaco said:
Only wireless tether is supported at the moment. Wired tether coming in a future release.
P
Click to expand...
Click to collapse
neither wireless or wired working for me..
Strange, wireless seems to be working for me I think?
P
wireless tethering say "please wait while starting" but never starts...
any suggestions?
modaco said:
Bizarre, never seen an error like that before!
What happens if you try to re-apply the ROM?
P
Click to expand...
Click to collapse
Re-Applying the ROM gets the same result.
I did Wipe and try to re-apply and also wipe and Nandroid. All got me nowhere. I ended up getting it fixed by applying Cyanogens Bacon1.img. I am really interested in your ROM though. Think maybe I got a bad download or something. I will try again and check the md5 sum this time.
my tether puts a signal out and all but i cant connect to it.. only get local
So after downloading the ROM again after the first one didnt work, I got this for the md5 checksum:
Code:
e04970294888313787d0b9d5cb370a12
Which is entirely different than what is posted on the MoDaCo Forum:
Code:
d537e42372a7239dfaf40846ef0b8b4e
However, I could be doing it wrong. This is the first time I tried using md5 checksums to verify a download. However I used two different utilitys to get the same checksum and I don't want to try to flash it again and have it mess up.
ccunningham83 said:
Re-Applying the ROM gets the same result.
I did Wipe and try to re-apply and also wipe and Nandroid. All got me nowhere. I ended up getting it fixed by applying Cyanogens Bacon1.img. I am really interested in your ROM though. Think maybe I got a bad download or something. I will try again and check the md5 sum this time.
Click to expand...
Click to collapse
I can help fix your problem and it is very simple. READ THE FIRST POST BY PAUL. DO NOT WIPE. Do a Nandriod backup then apply the update. Remember do not extract the rom file with I hope WINRAR, just rename update. Let me know if this solves it for you which it should. Kevin
kevinrirvine said:
I can help fix your problem and it is very simple. READ THE FIRST POST BY PAUL. DO NOT WIPE. Do a Nandriod backup then apply the update. Remember do not extract the rom file with I hope WINRAR, just rename update. Let me know if this solves it for you which it should. Kevin
Click to expand...
Click to collapse
Maybe I should have explained everything I did step by step, I did READ THE FIRST POST BY PAUL AND DIDN'T WIPE. Before I even tried flashing, I performed a Nandroid Backup. I booted into recovery, applied the update, got the error message I listed, tired to reboot, got stuck, pulled the battery, booted back into recovery, performed a wipe, reapplied the update, rebooted, still a no-go, rebooted back into recovery, performed a Nandroid restore, after it completed, rebooted, got stuck on bootloader screen, reloaded the ROM on the SD card, tried flashing again, still no luck, ended up flashing Cyanogens Bacon1.img to fix the problem.
I want to give it another try, but I may wait and find out if my md5 sum is correct or maybe try another link if someone post it up.
ccunningham83 said:
Maybe I should have explained everything I did step by step, I did READ THE FIRST POST BY PAUL AND DIDN'T WIPE. Before I even tried flashing, I performed a Nandroid Backup. I booted into recovery, applied the update, got the error message I listed, tired to reboot, got stuck, pulled the battery, booted back into recovery, performed a wipe, reapplied the update, rebooted, still a no-go, rebooted back into recovery, performed a Nandroid restore, after it completed, rebooted, got stuck on bootloader screen, reloaded the ROM on the SD card, tried flashing again, still no luck, ended up flashing Cyanogens Bacon1.img to fix the problem.
I want to give it another try, but I may wait and find out if my md5 sum is correct or maybe try another link if someone post it up.
Click to expand...
Click to collapse
Paul's rom's are only at modaco and I am pretty sure he does not allow other links for I only use his rom's and have one on my Hero Telus, AT&T 3G, and what I like most about them is he keeps them as close to stock as possible, a good thing, and just optimizes them.
Your not going to brick your n1 so I know your gun-shy now but try the link a few more times even and it will work. Also, delete or format your memory card so it the rom is at the root for this might have something to do with it. Want you to have a happy ending. Kevin
The zips are signed, if a download is corrupt it won't flash.
P
kevinrirvine said:
Paul's rom's are only at modaco and I am pretty sure he does not allow other links for I only use his rom's and have one on my Hero Telus, AT&T 3G, and what I like most about them is he keeps them as close to stock as possible, a good thing, and just optimizes them.
Your not going to brick your n1 so I know your gun-shy now but try the link a few more times even and it will work. Also, delete or format your memory card so it the rom is at the root for this might have something to do with it. Want you to have a happy ending. Kevin
Click to expand...
Click to collapse
I need to re-format my sdcard, I still have the three partitions from my G1. I will give that a try, but I am still unsure about the md5 sum issue. Not too worried about bricking the device after all I put my G1 through.
Thank you for posting here on XDA also
I have done the latest clockwordk mod and odin 1.85, but im still getting the sign error when i tried to install a new rom...what am i doing wrong? i have installed roms on other phones , i dont know why i cant seem to get this one going? i would really appreciate it, thanks
Is it just one ROM you've tried or every ROM? Try re-downloading the ROM it may be corrupted.
all roms, like as soon as i go into recovery it says it cant verify some sort signature, and then it lets me use recovery, but cant install anything....and i have followed all directions , i dont know what im doing wrong...couldnt do it with cm7 or mui..
sounds like you need to start over:
http://forum.xda-developers.com/showthread.php?t=1285894
Ok so i noticed something. In recovery my version is 5.0.3. I then intall mui rom go into bootloop but my recovery now says 5.06
jra8927 said:
I have done the latest clockwordk mod and odin 1.85, but im still getting the sign error when i tried to install a new rom...what am i doing wrong? i have installed roms on other phones , i dont know why i cant seem to get this one going? i would really appreciate it, thanks
Click to expand...
Click to collapse
it is not corruption. boot into recovery mode, choose install from SD card and then select toggle signature verification. Now try flashing your ROM.
nope that doesnt work either i download cm7 and i did the toggle signature thing and still get the same error, e:signature verification, i was able to install MUI, but i go into bootloop...and my recovery version changes from 5.0.3 to 5.06 after installing mui...idk this is so weird i have flahsed lots of different roms before but i cant seem to do it with this phone..
i already figured it out, i installed other roms, just not cm7 but ill figure that out later..thanks
jra8927 said:
i already figured it out, i installed other roms, just not cm7 but ill figure that out later..thanks
Click to expand...
Click to collapse
ok, what was the issue: PEBKAC, config or corruption?
Yes I have searched, yes I have tried google and yes I am still stuck...
I *think* I have tried just about everything and I have read through about 10 "soft brick" or "stuck on samsung screen after rooting on stock ICS" (and most combinations of) but nothing is working. I'm sure it's probably an easy fix but I just can't seem to get anywhere. Here's what happened.....
I googled rooting galaxy not after ICS update and found this http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
It was all I could find about rooting after the ICS OTA update, so I did it. Everything seemed fine. I had CW but no superuser so I DL it from the market as well as my old Titanium pro from back when I rooted my HTC. I rebooted my phone to get it all settled in and decided to run Titanium and get this party started. I got an error message that busybox was not installed so.... I installed it but when I clicked the app on my phone it said it would not install because I didn't have root access.... This is where the confusion starts to set in.
So I restarted to see if I could get into CW but when I rebooted the soft brick started.... I was stuck at the "samsung" screen.
I IMMEDIATELY ran to XDA and began my search. I can still get to DL mode, Odin and CW so I know there is hope. I tried the files listed in the "All in one guide for noobs" and the "Galaxy Note Super Everything Thread (I717)".
There was a suggestion to use Kies but when I put in my serial # and model name i get the "galaxy note does not support initializing" message.
I'm not new to flashing/rooting, although things are a bit different, I have a basic understanding of the process but I ain't no Einstein either...
I also tried to flash the stock Telus ICS rom but I got an error message and my lil droid guy went belly up....
Any help would be greatly appreciated! I love my note and this is killing me...
I have to go to work so if I don't reply immediately its because I have no email access at work.... Especially without my Note....
The steps are correct in the link you gave.
Did Odin3 say success?
Did you get CWM installed?
Did you flash superuser?
Is there a superuser icon in your apps?
Ranger is on it....
I'm thinking we dont have CWM on the device....????
And no SU flash, from within the recovery that doesnt exist....g
He has cwm, he did not flash superuser, Looks like he assumed flashing cwm would automatically root him.
Since you can get into recovery... i would just go ahead and download a Rom zip, transfer to phone by mounting in cwm (mounts and storage if you didn't know) and flash that sumbitch
Oh yep...found that.......Thanks brother....g
That means do or redo steps 13 to 16 in the guide you posted.
agreed....g
im back...
Just got in, thanks for the replies.
Yes I have CWM and can access it. I have tried to flash the CM roms as well as the stock telus ICS rom but was denied at install. I got a "assert failed getprop (ro.build.device)" message and 2 other "ro." error messages when I install the cm nightly quincyatt rom.
rangercaptain said:
The steps are correct in the link you gave.
Did Odin3 say success? Yes
Did you get CWM installed? Yes
Did you flash superuser? Yes
Is there a superuser icon in your apps?
Click to expand...
Click to collapse
Cant see my apps but when I first flashed CWM and was able to see my screen there was a SU app on my home screen because I DLed it from the market.
You need to update your CWM. Get it here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look right under the big green arrow in the first post of the thread.
Readreadread. Then thankbigjoethankbigjoe.
Of course, come back here if further assistance is needed or you solve the issue.
I thought I was on the latest. Someone else suggested that also, so I flashed the touch CWM Updated 04/14
rangercaptain said:
You need to update your CWM. Get it here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look right under the big green arrow in the first post of the thread.
Readreadread. Then thankbigjoethankbigjoe.
Of course, come back here if further assistance is needed or you solve the issue.
Click to expand...
Click to collapse
Yup, thats the one I flashed, its working and I get a successful message when I flashed SU so I assume its there also. Any recommendations of a rom to try and flash? Still hanging at the samsung screen.....
I appreciate the help by the way, I know how frustrating it can be to try and help with tech situations from emails and messages (Hi Mom ).
Thanks has been pushed....
That assert error is in the script used by CWM to flash and it is saying 'wrong rom for your device'. So for sure you have the correct CWM and rom for your phone? Just checking because errors at this point make your phone useless.
rangercaptain said:
That assert error is in the script used by CWM to flash and it is saying 'wrong rom for your device'. So for sure you have the correct CWM and rom for your phone? Just checking because errors at this point make your phone useless.
Click to expand...
Click to collapse
I got my CWM from the link you posted but the rom I am iffy about. Any suggestions for a rom to try and flash? something stable?
EDIT: going to try and flash this rom and modem http://forum.xda-developers.com/showthread.php?t=1801689
Downloading now..... Sloooooowly. lol
Holy McCrappy dance!
Okay... so I flashed the stock ATT with odin. just at start screen now.... Don't think it is rooted so now.... How do I get back to telus and root right the first time?
Edit: so it appears the ATT rom was a GB ver so I am assuming that I was somehow reverted to GB instead of my stock ICS. Now to try and flash a stock Telus GB rom, update then try to root.... AGAIN! Thank gawd I don't have a $600 paperweight now!
Thanks everyone
I recommend this rom:
http://forum.xda-developers.com/showthread.php?t=1766933
Select the pure stock. There is no point in using the Telus rom.
Please read carefully. Good luck.
^^^ what ranger said. No point in repeating trust and go!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
rangercaptain said:
I recommend this rom:
http://forum.xda-developers.com/showthread.php?t=1766933
Select the pure stock. There is no point in using the Telus rom.
Please read carefully. Good luck.
Click to expand...
Click to collapse
I would like my ota ICS back but I guess no bother huh? I am back on the stock telus GB and for some reason it wont let me update to ICS anyway.... LOL
Might as well root it up and go go go!
Thanks again Ranger.
WOW! that pure stock is a big ole file! lol
Ok, take it easy for a few days. Just read up and, now that you've survived the worst scenerio, you might want to try a more custom rom or other modifications. Pretty soon you will be pulling someone else's a$$ out of the fire. Good luck.
I think I'm okay now. Was a skeerty one though. Lol
please help whenever i try to flash this rom with twrp 2.3.1 i gives me th error zip could not be opened. i have followed devs instuctions very carefully with no luck. when i look at the rom in a file manager on my phone i shows there is nothing in the directory but when i open up a dirent version or diffent sence rom it is full of system files. please help! also i am pretty sure this is not a twrp problem
i just flashed that rom again today with no problems..its not the rom..
evo401 said:
i just flashed that rom again today with no problems..its not the rom..
Click to expand...
Click to collapse
Do u still have the Rom file? can u look at it and tell me if there are files showing up?
i had a prob here too.. flashed and installed that rom no prob .. but after i did a titanium restore .it wouldnt boot back up .. reflashed .. same deal
spaghettiknight said:
please help whenever i try to flash this rom with twrp 2.3.1 i gives me th error zip could not be opened. i have followed devs instuctions very carefully with no luck. when i look at the rom in a file manager on my phone i shows there is nothing in the directory but when i open up a dirent version or diffent sence rom it is full of system files. please help! also i am pretty sure this is not a twrp problem
Click to expand...
Click to collapse
did you compare the md5 to the md5 of your downloaded zip? also make sure you have signature checking disabled.
and the titanium backup issue, what rom are you coming from that you are trying to restore data from?
Also, these questions would bbe easier for us to find and answered if they were posted in the ROM thread.
I just checked the md5 sums and they did not match what can I do about that
spaghettiknight said:
I just checked the md5 sums and they did not match what can I do about that
Click to expand...
Click to collapse
Redownload bud...it means u got a bad d/l
Sent from my EVO using xda premium
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.