I have done the latest clockwordk mod and odin 1.85, but im still getting the sign error when i tried to install a new rom...what am i doing wrong? i have installed roms on other phones , i dont know why i cant seem to get this one going? i would really appreciate it, thanks
Is it just one ROM you've tried or every ROM? Try re-downloading the ROM it may be corrupted.
all roms, like as soon as i go into recovery it says it cant verify some sort signature, and then it lets me use recovery, but cant install anything....and i have followed all directions , i dont know what im doing wrong...couldnt do it with cm7 or mui..
sounds like you need to start over:
http://forum.xda-developers.com/showthread.php?t=1285894
Ok so i noticed something. In recovery my version is 5.0.3. I then intall mui rom go into bootloop but my recovery now says 5.06
jra8927 said:
I have done the latest clockwordk mod and odin 1.85, but im still getting the sign error when i tried to install a new rom...what am i doing wrong? i have installed roms on other phones , i dont know why i cant seem to get this one going? i would really appreciate it, thanks
Click to expand...
Click to collapse
it is not corruption. boot into recovery mode, choose install from SD card and then select toggle signature verification. Now try flashing your ROM.
nope that doesnt work either i download cm7 and i did the toggle signature thing and still get the same error, e:signature verification, i was able to install MUI, but i go into bootloop...and my recovery version changes from 5.0.3 to 5.06 after installing mui...idk this is so weird i have flahsed lots of different roms before but i cant seem to do it with this phone..
i already figured it out, i installed other roms, just not cm7 but ill figure that out later..thanks
jra8927 said:
i already figured it out, i installed other roms, just not cm7 but ill figure that out later..thanks
Click to expand...
Click to collapse
ok, what was the issue: PEBKAC, config or corruption?
Related
Hello all,
I have accidently flashed my nexus s with a 4G rom... I know stupid me.
Now I cannot get service and baseband .
I cannot seem to fix it. Does somebody have a tip? I hope so cuz I dont wanna be buying a new phoney.
Thnx in advance!
Just restore a backup on the recovery. Or, if you didn't do a backup (please tell me i'm wrong), download the right ROM, copy it to your phone, WIPE everything and flash it
Well I tried that but the backup gives an MD5 error . And I cannot find a clean rom I do need now. All the ones I tried gave an error in CWM error 7 or something.
Tokageroh said:
Well I tried that but the backup gives an MD5 error . And I cannot find a clean rom I do need now. All the ones I tried gave an error in CWM error 7 or something.
Click to expand...
Click to collapse
I see. Well, your backup is corrupted, we can't do anything for it.
But, go to your Nexus S section in XDA, download one and see if the MD5 match. Then if it's ok, try to flash it : )
FYI, i don't have a nexus, so, i'm not a professional of it but... a rom for a 4G phone if you only have a 3G phone will boot up normally but give problem with GSM and data connection. So that's weird.
Try again with a ROM that you download now and match the MD5. And then, if error still here, we must a Nexus S owner to help you
I will try so when i get back from work. I really hope I can get it to work. The phone boots normally but wont ask for my pin and that stuff. How do I check the MD5 if I may ask?
Tokageroh said:
I will try so when i get back from work. I really hope I can get it to work. The phone boots normally but wont ask for my pin and that stuff. How do I check the MD5 if I may ask?
Click to expand...
Click to collapse
http://www.commentcamarche.net/download/telecharger-34058173-md5-checksum with this programm for windows.
You put the rom in, it shows the MD5. Then look on the topic where you downloaded the ROM and see if it's the same. If md5 is not written in the topic, ask for it
Also I forgot to mention that when I tried to flash to a NS mod i got an error 7 or something in CWM
Hey guys, i don't usually make posts for every question i have, unless i absolutely don't find an answer searching or googling. I find myself in the position where i want to customize my Hyperdroid ROM and i can't manage to install DOC's Surgeon.
I think maybe the file i find in AndroidMeda Rom Tool is just an update, and not a full release, but being a noob is difficult, and i really didn't managed to pass this!
So, long story short, how can i flash a surgeon that is on androidmeda rom tool? I tried the Surgeon_Lucid_v5.0.zip and i can't get through, it fails to install under recovery mode.
I would very much appreciate a solution to my dumb question, hope i don't irritate somebody.
mightyvenom said:
Hey guys, i don't usually make posts for every question i have, unless i absolutely don't find an answer searching or googling. I find myself in the position where i want to customize my Hyperdroid ROM and i can't manage to install DOC's Surgeon.
I think maybe the file i find in AndroidMeda Rom Tool is just an update, and not a full release, but being a noob is difficult, and i really didn't managed to pass this!
So, long story short, how can i flash a surgeon that is on androidmeda rom tool? I tried the Surgeon_Lucid_v5.0.zip and i can't get through, it fails to install under recovery mode.
I would very much appreciate a solution to my dumb question, hope i don't irritate somebody.
Click to expand...
Click to collapse
You should download again, and apply the surgeon in the rom tool!
sonyz7 said:
You should download again, and apply the surgeon in the rom tool!
Click to expand...
Click to collapse
I have already done that...
Have you asked on the Hyperdroid thread. I think you may have more luck.
Sent from my GT-I9100
sxi200 said:
Have you asked on the Hyperdroid thread. I think you may have more luck.
Sent from my GT-I9100
Click to expand...
Click to collapse
Unfortunately i can't post there, i don't got the minimum 10 posts...ridiculous i know :-<
Quote from Android system recovery <3e>:
"E: missing bitmap password_retry_45 (Code -1)
E: missing bitmap password_notmatched_45 (Code -1)
E: missing bitmap password_max16_45 (Code -1)"
When installing multi-csc it says the following (also in android system recovery):
"-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/KOR/system/'.
Successfully applied multi-CSC."
Have you changed the kernel from the one that comes with Hyperdroid? As the OTA tool will only work automatically with the kernel the rom comes with.
If so you will need to download the file via the OTA tool, find where it saves, should be somewhere in the SD card (Hint /sdcard/Hyperdroid_Androidmedia)
Reboot into CWM recovery
Flash the zip manually.
veyka said:
Have you changed the kernel from the one that comes with Hyperdroid? As the OTA tool will only work automatically with the kernel the rom comes with.
If so you will need to download the file via the OTA tool, find where it saves, should be somewhere in the SD card (Hint /sdcard/Hyperdroid_Androidmedia)
Reboot into CWM recovery
Flash the zip manually.
Click to expand...
Click to collapse
Thanks, i will try that right away and report back
mightyvenom said:
Thanks, i will try that right away and report back
Click to expand...
Click to collapse
even if you changed kernels you can still flash stuff that you download from the OTA tool. So say you want to download Docs surgeon. Download it through the OTA app and then rather than apply now press apply later. Then try and get into recovery..there install zip and go through the folder were it says hyperdroid androidmeda...there you have all the files you have downloaded and just flash like you would normally do something...But only use this if you want to change kernels..My advice is the same as the guy above posted..Use the kernel provided by the team and you should not have any problems flashing stuff through the OTA app...
It worked fine, thank you again. Now i figured, indeed the change of my kernel led to that conflict.
Cheers guys!
mightyvenom said:
It worked fine, thank you again. Now i figured, indeed the change of my kernel led to that conflict.
Cheers guys!
Click to expand...
Click to collapse
Huh, I didn't think about you changed the kernel. Pongster's HDK kernel is very good, don't change that in my opinion.
So, Im glad that your problem solved.
Tapatalk
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
bump. Please, need help.
ClipTy said:
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
Click to expand...
Click to collapse
if you dont have cwm installed, i assume that you flashed that rom while in bootstrap recovery because you didnt state that the phones bootloader was unlocked.That particular rom is an unlocked only rom, which is why you're stuck in that loop. If I'm right and you flashed that rom via bootstrap, you should be able to get back into it by powering down the phone, holding power and volume down, then using the volume down key to cycle through the options until you hit 'android recovery', then press volume up to boot into it.
At that point, go to mounts and storage, mount usb storage while phone is plugged into your pc, and place this rom:
http://forum.xda-developers.com/showthread.php?t=1648297
On your sd card. After this, go back into mounts and storage and wipe data, system, and cache. Flash the rom you just placed onto your sd card and reboot.
Again, this is all asuming you installed bootstrap recovery, if I'm wrong let me know and ill try to help you further.
I forgot to add, you're also going to need to download a stock blur kernel and place that on your sd card aswell, flashing it after you flash the rom. I can't remember where to find the stock blur kernel but give me a second and ill try to find it for ya.
I don't find that very professional. I think the best you can do is tell me which section it belongs in. At least Acvice offered help...
Thanks you so much! I knew I would have to flash the stock stuff, but I just couldn't find it! Yes, I used bootstrap as I thought it was the only means of getting into cwm. I wont be screwing around after this. Only problem is, the phone is dead! I need to charge it again lol. Thanks for helping. Ill let you know the outcome later.
Acvice said:
*snip*
Click to expand...
Click to collapse
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
ClipTy said:
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
Click to expand...
Click to collapse
Meh, you just flashed something you shouldnt have is all. It honestly happens to all of us. You learn the most by screwing up your phone haha.. Figured i would have you try that method as it would have gotten you a nice fast rom and also fixed your problem. But it looks like youre just unlucky. Were just gonna have to get ya back on stock by flashing an SBF.
1) Download the Windows Moto drivers and install them. Make sure you choose 32bit or 64bit, respectively. (quick google search)
2) Download RSD Lite (quick google search)
3) Download the SBF located here and unzip it.
Use this video to guide you through. Some of his links are outdated which is why i linked the one above. If you are used to ODIN on Samsung devices, you'll probably already know what to do as it's the same kind of program. Good luck. Let me know how it goes.
I've tried RSDLite with an Sbf before, it never succeeded.
Sent from my HTC Sensation using xda app-developers app
Is it possible to flash an sbf with a low battery? If not, how can I charge this thing?
Yes I have searched, yes I have tried google and yes I am still stuck...
I *think* I have tried just about everything and I have read through about 10 "soft brick" or "stuck on samsung screen after rooting on stock ICS" (and most combinations of) but nothing is working. I'm sure it's probably an easy fix but I just can't seem to get anywhere. Here's what happened.....
I googled rooting galaxy not after ICS update and found this http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
It was all I could find about rooting after the ICS OTA update, so I did it. Everything seemed fine. I had CW but no superuser so I DL it from the market as well as my old Titanium pro from back when I rooted my HTC. I rebooted my phone to get it all settled in and decided to run Titanium and get this party started. I got an error message that busybox was not installed so.... I installed it but when I clicked the app on my phone it said it would not install because I didn't have root access.... This is where the confusion starts to set in.
So I restarted to see if I could get into CW but when I rebooted the soft brick started.... I was stuck at the "samsung" screen.
I IMMEDIATELY ran to XDA and began my search. I can still get to DL mode, Odin and CW so I know there is hope. I tried the files listed in the "All in one guide for noobs" and the "Galaxy Note Super Everything Thread (I717)".
There was a suggestion to use Kies but when I put in my serial # and model name i get the "galaxy note does not support initializing" message.
I'm not new to flashing/rooting, although things are a bit different, I have a basic understanding of the process but I ain't no Einstein either...
I also tried to flash the stock Telus ICS rom but I got an error message and my lil droid guy went belly up....
Any help would be greatly appreciated! I love my note and this is killing me...
I have to go to work so if I don't reply immediately its because I have no email access at work.... Especially without my Note....
The steps are correct in the link you gave.
Did Odin3 say success?
Did you get CWM installed?
Did you flash superuser?
Is there a superuser icon in your apps?
Ranger is on it....
I'm thinking we dont have CWM on the device....????
And no SU flash, from within the recovery that doesnt exist....g
He has cwm, he did not flash superuser, Looks like he assumed flashing cwm would automatically root him.
Since you can get into recovery... i would just go ahead and download a Rom zip, transfer to phone by mounting in cwm (mounts and storage if you didn't know) and flash that sumbitch
Oh yep...found that.......Thanks brother....g
That means do or redo steps 13 to 16 in the guide you posted.
agreed....g
im back...
Just got in, thanks for the replies.
Yes I have CWM and can access it. I have tried to flash the CM roms as well as the stock telus ICS rom but was denied at install. I got a "assert failed getprop (ro.build.device)" message and 2 other "ro." error messages when I install the cm nightly quincyatt rom.
rangercaptain said:
The steps are correct in the link you gave.
Did Odin3 say success? Yes
Did you get CWM installed? Yes
Did you flash superuser? Yes
Is there a superuser icon in your apps?
Click to expand...
Click to collapse
Cant see my apps but when I first flashed CWM and was able to see my screen there was a SU app on my home screen because I DLed it from the market.
You need to update your CWM. Get it here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look right under the big green arrow in the first post of the thread.
Readreadread. Then thankbigjoethankbigjoe.
Of course, come back here if further assistance is needed or you solve the issue.
I thought I was on the latest. Someone else suggested that also, so I flashed the touch CWM Updated 04/14
rangercaptain said:
You need to update your CWM. Get it here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look right under the big green arrow in the first post of the thread.
Readreadread. Then thankbigjoethankbigjoe.
Of course, come back here if further assistance is needed or you solve the issue.
Click to expand...
Click to collapse
Yup, thats the one I flashed, its working and I get a successful message when I flashed SU so I assume its there also. Any recommendations of a rom to try and flash? Still hanging at the samsung screen.....
I appreciate the help by the way, I know how frustrating it can be to try and help with tech situations from emails and messages (Hi Mom ).
Thanks has been pushed....
That assert error is in the script used by CWM to flash and it is saying 'wrong rom for your device'. So for sure you have the correct CWM and rom for your phone? Just checking because errors at this point make your phone useless.
rangercaptain said:
That assert error is in the script used by CWM to flash and it is saying 'wrong rom for your device'. So for sure you have the correct CWM and rom for your phone? Just checking because errors at this point make your phone useless.
Click to expand...
Click to collapse
I got my CWM from the link you posted but the rom I am iffy about. Any suggestions for a rom to try and flash? something stable?
EDIT: going to try and flash this rom and modem http://forum.xda-developers.com/showthread.php?t=1801689
Downloading now..... Sloooooowly. lol
Holy McCrappy dance!
Okay... so I flashed the stock ATT with odin. just at start screen now.... Don't think it is rooted so now.... How do I get back to telus and root right the first time?
Edit: so it appears the ATT rom was a GB ver so I am assuming that I was somehow reverted to GB instead of my stock ICS. Now to try and flash a stock Telus GB rom, update then try to root.... AGAIN! Thank gawd I don't have a $600 paperweight now!
Thanks everyone
I recommend this rom:
http://forum.xda-developers.com/showthread.php?t=1766933
Select the pure stock. There is no point in using the Telus rom.
Please read carefully. Good luck.
^^^ what ranger said. No point in repeating trust and go!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
rangercaptain said:
I recommend this rom:
http://forum.xda-developers.com/showthread.php?t=1766933
Select the pure stock. There is no point in using the Telus rom.
Please read carefully. Good luck.
Click to expand...
Click to collapse
I would like my ota ICS back but I guess no bother huh? I am back on the stock telus GB and for some reason it wont let me update to ICS anyway.... LOL
Might as well root it up and go go go!
Thanks again Ranger.
WOW! that pure stock is a big ole file! lol
Ok, take it easy for a few days. Just read up and, now that you've survived the worst scenerio, you might want to try a more custom rom or other modifications. Pretty soon you will be pulling someone else's a$$ out of the fire. Good luck.
I think I'm okay now. Was a skeerty one though. Lol
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.